163 modeli
Hello there, Full credit to user Rusty__Shackleford for this great model "Angled fore grip mlok AFG M-LOK" I just remixed it by cutting side mount which didn't really worked for me, also took me too much time thinking about good angle for…
I remixed Damascus2A's MLOK Handstop V1 to have the Die Free Kung Fu Grip texture. https://odysee.com/@Damascus_2a:6 https://diefree.com/kung-fu-grip/ Below are my recommended print settings: Resolution: 0.1mm Infill: 99% Walls: 10+…
I'm too cheap to buy a real BCM, so I made this. Mounts to Mlok rails, and the grip angle is 82 degrees.
Micro Mlok Handstop Uses standard mlok hardware Or as LayersForLife, LLC commented M4x12 or an M5x12 will also work if you are making your own mlok hardware. Category: Other
Vertical grip that mounts to mlok rails. Stubby version included. Feel free to comment or message me if you need any help!
-----Download the ZIP to see all the files.----- ---Modular M-LOK Handstop Kit--- Decided to expand the usability of a well known handstop kit. ---Description The Modular M-LOK Handstop Kit expands the functionality of a similar system.…
For best results, print in a temp resistant material. Print at 100% infill for max strength. Supply your own MLOK nuts/bolts. I used these: https://www.amazon.com/gp/product/B0CXJDDKR3
There really isn't a lot to this model. I needed a handstop for my mp5, so I drew one up real quick and printed it. I thought other people might find it useful, so I'm publishing it here.
MLOK 5.5" rail guards and handstop for any MLOK series handguard. STL files and Solidworks files for each part attached. Use Supports touching buildplate only.
Another MLOK vertical grip. If you like the original Magpul MVG, then you should like this one also. Assembled using two DIN912 M4x35mm screws.
This handguard for the BK1S/2S replicates the look of the LVOA AR handguard in a 9.5" length. It is compatible with the handguard nut that comes with the blaster, as well as the original screw and nut. All MLOK slots are functional. The…
some of this are difficult to print and have to have your bed leveled perfect otherwise if there is any elephant footing at all it bleeds into the design. Edit: 11/16 - removed some that didnt print well on all my printers and redid…
Simple handstop for that only requires one MLOK slot. Designed to use metric M4 screws such as these ( https://www.amazon.com/dp/B0895GGH7C ), but it can be modified to use larger ones.
!!Important!! - measure the length of your M-Lok slots if they are 32 use the normal if they are 32.3~ use the wide varients The model was remodeled since it the tabs in the back were not centered but it keeps the original size of the…
Remixed from Recticle's Angled vertical foregrip (Originally on Thingiverse). This is just the same but I adjusted the diameter of the holes to fit Magpul OEM MLOK hardware. Good for anything MLOK, whether it's a firearm or an airsoft,…
seem lots of people ask for something this size and shape. so … here you go!
I made a mount for M-Lok pattern rails, I have made three of these, and they all seem to work pretty well, but as usual, they are plastic, so use at your own risk. They are designed to be vertically oriented, but seem to be perfectly…
Umožňuje připojení široké škály doplňkového příslušenství.
MLOK standard attachment. A strong, minimalist loop for a mashhook, HK snaphook, or a loop of paracord for sling attachment. Fitment was tested on a ‘real steel’ handguard. The hardware I used for testing and fitment was taken from a QD…
4 Variants of the handstop. “small” ones are a bit thinner and the “hook” is smaller. Designed for M4 screws. Print orientation as on the screenshot.
MLOK Vertical grip, Uses M4 MLOK screws I found mine on Amazon. I recommend printing all my files with 100% infill. airsoft mlok grip
Slim fitting 2-slot wide MLOK rail cover with a diamond textured grip pattern. Requires M5 MLOK mounting hardware with countersunk heads. This is the hardware I used:…
Are We Cool Yet? Mlok Handstop
Made this 45º angled grip for the M-Lok airsoft gun since i couldn't find a free design online. Huge thanks to this model https://www.thingiverse.com/thing:5418834 from which I got the slot part of the grip. Printed with PLA and 0.3m…
20 degree AFG compatible with M-LOK
I loved the look of the MREX rail system by PTS, but I didn't want to drop $100+ on one, so I made a 3D printed clone of it. Installation is super easy, all it does is replace the regular picatinny rails on your rifle. There are multiple…
I just picked up my fourth HF radio, a Yaesu FT-891 and I needed rails for it. These rails protect the front knobs and rear connections very well without adding alot of bulk. The slots on the side are mlok dimensions so you can add any…
This is an M-LOK Cover that is inspired by the Magpul Type 2 covers. It also is compatible with the original, so mix and match to your liking. Or use as a spare part. Included are two different textured covers as examples and one blank…
Sling Kontrol - MLOK "by" Qwerm A shameless ripoff of Subrev's M-LOK Sling Control, a M-LOK accessory that helps store your sling when not using your rifle. Print orientation: Print everything on it's side. Settings used: Layer Height:…
Slim fitting 2-slot wide MLOK rail cover with a hexagonal textured grip pattern. Requires M5 MLOK mounting hardware with countersunk heads. This is the hardware I used:…
MLOK 5 slot picatinny rail, offset mounting holes. Uses standard MLOK mounting hardware. Print with regular support.
K98 Style Bayonet Lug for MLOK Interfaces. Print orientation and supports as shown MLOK nuts required If you need anything, feel free to reach out! Questions/Suggestions/Criticism is highly appreciated. Happy Printing…
MLOK Finger Stop, uses one bolt and nut. Designed to use the longer of the two Magpul MLOK bolts (about 10mm long). Prints fine with PLA using supports (MLOK interface down on build plate), but might be tricky with other filaments.
Just a modified MLOK Handguard to have picatinny.
I have reinforced the handguard in the bottom section, because otherwise vertical grips could easily break the print. I have also designed a “gas block” which serves as additional fixation point for the handguard, but it only fits the…
This remix does the following: I shortened it to allow access to the loading port on the youth model. Made the mlok functional. Adjusted the external geometry to my tastes. The “-print” version should be a little easier to print, you just…
45° mount fits pretty tight to the rail surface, won't likely fit rounder rails. Inline mount is offset just enough to get to the MLOK bolts with a ball end Allen key. A longer mount that placed the flashlight past the bolts didn't pass…
Mlok mounted cigarette holder
this is a simple flashlight mount for an mlok rail. it fits a 21mm flashlight and mounts with normal sized zip ties. printed %100 with petg no supports
Print on it's side, with supports, to ensure maximum durability of the loop.
MLOK QD Sling Swivel Mount by DB Firearms. This utilizes QD Socket Heat Inserts by Hyperion 2A Print with PLA+ or better. CF Nylon would be the best for a long lasting piece. Though these have been known to withstand over 200lbs of force…
ORIGINAL: Front retainer with MLOK holes. Use the long version only if you have a flash can/suppressor/extended barrel. Took DMarshmallow's barrel retainer, along with poolboy97's edited version of Louisthebeast's Glock barrel adapter,…
Handstop for MLOK handguard. Copied from Slate Black Industries' Slate Grip. Designed for M5 screw with countersunk head, but smaller screws should also work. Print with MLOK side down with support. Print Settings Rafts: No Supports: Yes…
Description: Simple stop for your AR! Or an AK if you're into inferior designs. Hardware: Only needs 1 screw/nut! I modeled it with hardware I had on hand, so if you have compatibility issues let me know! Print Instructions: I used 4…
I removed the front part of the hand stop. Remix of existing model.
Rail covers for M-LOK handguards. Copied from Slate Black Industries' Slate Grip. Comes in various lengths. Designed for M5 screws with countersunk heads, but smaller screws should also work. Print with the MLOK side down with support.…
A small edit to Hitako's slab mlok handguard to cut it at an angle to make it look better with the default muzzle.
I needed an M-lok cover so made this hex pattern one, the pattern provides good grip. The width is 18mm length 80mm, I printed the one in the pictures at 0.28 height I would suggest 0.2 or smaller to give you a smoother finish.
Barrel nut threads directly to upper receiver. Handguard threads into barrel nut and is held together with two or three M3x0.5x12 screws. You can slice the model to a shorter size if you want. Just sand and superglue the edges to put them…
This fits my MLOK cage and MLok rails I designed for my radios. It will relocate a digirig via mlok nuts. Links MLok Nuts - https://www.amazon.com/dp/B0B845WY3D?ref=fed_asin_title&th=1 Related Models Icom IC-2350H Cage -…
Update May-20, 2024: Fixed a problem with the extralight handguard that caused printability issues. 0.2mm layer height, 0.4mm line width (or whatever is your slicer defaults to for 0.4mm nozzles) reccommended. Brim may be needed. This is…
Simple grip design with my crosshatch pattern on it. Mounts with mLok. “brim” variant has built in support for printing.
The covers are designed for the long handguard (16.75") for both Keymod and MLOK and sit tightly in the rails. A rubber hammer is recommended for assembly. For the design I took measurements and used the official technical drawing of the…
Automatkarbin 24 style 10.5" long handguard. It's quite a bit heavier and stiffer than my previous Sako inspired designs, it's more similar to my Stubby handguards. Unlike in real one, there's no cutout for gasblock adjustment. I'm not…
See Zip file for complete set of files. Update 03/31/2026: Added CrossHatch-5_Pin and CrossHatch-94mm to ZIP, to match those shown in cover image. ---Title: mLok Round Cover, Cross Hatch ---Description: I wanted to cover my Henry's mLok…
This fits my MLOK cage I designed for my radio. It will relocate a SO-239 coax connection. Links Related Models Icom IC-2350H Cage - https://www.printables.com/model/1246431-icom-ic-2350h-cage Relocation Bracket BNC + Audio -…
Out Of Battery Live Mlok Handstop
I modified the Mod3-Mlok-v12 by QwermMakes to have a honeycomb grip pattern.
This is a Vertical Angled foregrip styled after the MLOK BCM Mod 3. There will be several versions available. The only model released currently has the same angle as the FGC-9's magwell and fits nicely around the barrel retainer. It works…
Description: Similar to the Slate Black Industries Slate Stop, but with a longer grip similar to the Emissary Development Handbrake. The front section is great for use as a handstop/angled grip, and the notch at the back is good when…
Olight pressure pad mlok mount for Odin S pressure pad. Separate head and tail caps to mount your pressure pad to an mlok platform. Recommend printing PETG with 50% infill to get full strength of the caps. Last photo includes my Olight…
Is a fore grip for an AIRSOFT GUN. mlok atament things will be needed
Contoured 2-slot wide MLOK rail cover with a diamond textured grip pattern. Requires M5 MLOK mounting hardware with countersunk heads. This is the hardware I used:…
MLOK 6 slot picatinny rail, offset mounting holes. Uses standard MLOK mounting hardware. Print with regular support.
This fits my MLOK cage I designed for my radio. It will relocate a pair of Anderson Powerpole connectors. Related Models Icom IC-2350H Cage - https://www.printables.com/model/1246431-icom-ic-2350h-cage MLok Relocation Bracket BNC -…
M-LOK rail covers I used PC blend for these and it worked great. The covers fit very snug so you may need to scale them down a tiny bit, depending on your printers calibration.
This was created to fit a UTG Pro handguard on an MP5K/SP5K which utilizes a single MLOK slot on the 12 o clock and 9 o clock positions of the handguard. It occupies a single MLOK slot and uses M3 hardware 2x(M3 nut + M3x30mm hex socket…
This is a 3 slot MLok Handguard with a continuous picatinny rail. You can now install things like this comically large M16 carry handle or move your scopes anywhere. Longest inner barrel this version can cover is 173mm. No supports…
I used M4x10mm countersunk screws for mounting it
This fits my MLOK cage I designed for my radio. It will relocate a BNC coax connection. Links BNC Jacks - https://www.amazon.com/dp/B08139D4XS?ref=fed_asin_title Related Models Icom IC-2350H Cage -…
Add this 8-slot rail to your MLOK handguard to fit picatinny attachments. MUST be used in conjunction with Praxican hideaway plates: https://www.printables.com/model/1383702-mlok-hideaway-plate-2-lug These plates are necessary to mount to…
Increase grip comfort and style. MUST be used in conjunction with Praxican hideaway plates: https://www.printables.com/model/1383702-mlok-hideaway-plate-2-lug These plates are necessary to mount to MLOK. Recommended print settings: PLA or…
This fits my MLOK cage I designed for my radio. It will relocate a BNC coax connection and audio speaker cable. Links Audio Jacks - https://www.amazon.com/dp/B0C9MDDLNG?ref=fed_asin_title BNC Jacks -…
Made for specna arms and cyma AR's. I printed it without supports 40% infil Tested in 0,2 resolution material petg For A
Angled foregrip for increased comfort. MUST be used in conjunction with Praxican hideaway plates: https://www.printables.com/model/1383702-mlok-hideaway-plate-2-lug These plates are necessary to mount to MLOK. Recommended print settings:…
Vented Mlok handguards for CETME C with various engravings, or plain. Requires reuse of the metal fittings from an oem wooden handguard. Modified from oem dimensions to fit on printers with 280mm Z. Should not need supports if your…
Because barricade stops are cool. MUST be used in conjunction with Praxican hideaway plates: https://www.printables.com/model/1383702-mlok-hideaway-plate-2-lug These plates are necessary to mount to MLOK. Recommended print settings: PLA…
M-lok clamp for convoy s2 or any other flashlight with at outer diameter of 24mm. The clamp uses 2 M3x10 screws and 2 M3 nuts. The pressure switch is also from convoy and fits in with a smal bit of dubble sided tape or some glue. Can be…
literally a mash up of the hollow kung fu stipple grip and the mp5k mlok grip.
Mlok handguard for the ASG Airsoft Scorpion Evo. There is a regular version, and one for the custom suppressor Pre-2018 and 2018 variants of both MAKE SURE YOU KNOW WHAT YEAR YOUR EVO WAS PRODUCED. 2018 and newer Evos are a bit different…
used creality recommended setting but use 100 infill. DO NOT FORGET SUPPORTS!! I had spare mlok screws so not sure on the size, might be standard mlok size screws
Print vertically, with supports only on the MLok interface. Requires 2 M5 MLok nuts and flat head screws, and 2 zip ties.
Threaded outer barrel to fit a mlok handguard barrel nut, tested with Airsoft M-lok handguard with delta ring by Igniz - Thingiverse
This hideaway plate makes it easy to print compatible MLOK accessories without supports. The MLOK retaining extrusions often make it difficult to print mounted accessories without supports in the shortest print time. Praxican-style…
The MLOK handguard looks awesome but isn't the best for priming as you need to really squeeze it. The easy solution would be an MLOK handstop but real MLOK accessories don't fit. To address this, I merged the handstop with the handguard.…
MLOK Mounted skeletonized angled foregrip for airsoft purposes
Decided I will keep building things for the Mlok system, here is my take on a charm mount
Offset rail attachments secured with screws. Easily mount offset picatinny rail attachments when used in conjunction with Praxican picatinny rail: https://www.printables.com/model/1383721-mlok-picatinny-rail MUST be used in conjunction…
Uses standard MLOK hardware and occupies one slot. Flares to the side of the mounting surface are 45 degree. Print with PLA+ and 6 perimeters. Set with the MLOK interface facing up. Support will be needed on the inside flat. Organic…
Printed with the hollow section facing down. Supports for the overhang and a brim for the first layer are recommended.
Simple Mlok Rail Piece for the TM MP7 to replace the Picatinny rails. Print Settings Printer Brand: Creality Printer: Ender-3 S1 Supports: Doesn't Matter Resolution: 0.2 Infill: 35 Filament: Any PETG works best Any Category: Other
Stubby vertical foregrip for mounting on a standard MLOK rails. Finger undercut and general shape inspired by the sig P365 grip, with diamond texture homage to the classic 1911 grip. Mount using qty = 2 M5 MLOK bolts, like these ones I've…
DFCO Tiger Claw at home. Hence the faux claw . Originally printed in PA6CF but can reasonably be printed in PLA pro or similar material. MLOK compatible, printed originally on an 0.6mm nozzle but sliced in 0.4 for your convenience. 0.18…
you will need to use screws and bolts to actually mount it to anything the countersunk holes in the grip are 5mm. Should be good for airsoft or cosplay. attached the OBJ file so anyone can modify the attachment points for a pic rail or…
I had no problems printing this with pa612cf15 and PET-GF mlok side down. 99%. 5 walls. supports on base
Olight Odlin S pressure pad mlok mount. This mount is full-sized and has the wire routing on the top, a bit longer method.
9/30 NOTE: I have not printed this yet. Released as Work In Progress Mid-length vertical foregrip to be mounted on a standard MLOK rail. Round with 4 ribs and smooth texture to allow rapid grip acquisition, loosely inspired by Tango Down…
An extended picatinny rail that attaches with mlok. Requires 2 mlok fasteners and t nuts.
9/30 NOTE: I have not printed this yet. Released as Work In Progress Stubby vertical foregrip to be mounted on a standard MLOK rail. 3 ribs and diamond texture to maximize grip, loosely inspired by the B5 and Tango Down grips. Mount using…
![[WIP] MLOK K98 Bayonet Lug](https://media.printables.com/media/prints/478982/images/3925436_40cfe385-c51a-4403-9eb3-c8d7126cbb4e/bayonet-lug-watermark.jpeg)
