Wyniki wyszukiwania: mount

Sortowanie

99 038 modeli

P
Printablesniklasbartsch

Apple TV 4K Wall-mount

You don't need to use any support. I welcome your feedback!

Wydruk około 3,10 €–3,79 € nettoWstępna wycena jednego wariantu

Pobrania
5757
Polubienia
363
Ocena
4,88
P
Printablesfuchsr

Super PINDA (SPINDA, S.P.I.N.D.A) Height Adjustment Tool, mounts into 3030 extrusion

Useful for finding the right distance of the Super PINDA from the print bed. The optimal distance for the Super PINDA is about 1.5mm. That should get your optimal Live Z/first layer calibration to somewhere around -1.00, so you'll have…

Wydruk około 0,42 €–0,52 € nettoWstępna wycena jednego wariantu

Pobrania
4931
Polubienia
992
Ocena
4,88
P
Printables75echo

'Gem rock' mount for your articulating dragon

Printed at 0.3 mm layer height in about 4 hrs. designs to print with no infill and no supports. There are 2 holes under if you want to put an led light source to illuminate your gem crystals likewise you can paint the rock formation and…

Wydruk około 4,41 €–5,39 € nettoWstępna wycena jednego wariantu

Pobrania
4301
Polubienia
1620
Ocena
4,83
P
PrintablesKYZ Design

X45 Sprite CR Touch Probe Zero Y-Offset Mount v1.1 (Ender-3 S1 Pro and similar)

Update 25/08/2023 v1.2 added - access for heat break setscrew created, small amount of material added on the fan-side of the grille near the bottom to ensure proper clearance to heatsink fan. Update 11/04/2023 v1.1 added - probe bracket…

Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu

Pobrania
3583
Polubienia
526
Ocena
4,85
P
PrintablesDaHouzKat

Multifunction Arm mounting system Spinning Adapter

360° Spinning Adapter for the Multifunction Arm Mounting System What you need Multifunction Arm mounting system (Small Arm System) Big Clamp For Small Arms This Spinning Adapter Side small-NUT-M3.stl (1x) screw-small.stl (1x) Hardware…

Wydruk około 1,28 €–1,56 € nettoWstępna wycena jednego wariantu

Pobrania
3142
Polubienia
1825
Ocena
4,63
P
Printablesbrahoy

Apple TV 4K Mount - Wall/TV Stand

My Apple TV quickly accumulated dust while it was sitting under my TV. I wanted a holder that I could attach to either the wall, VEGA mounting brackets on the back of the TV, or use 3M Command Strips depending on where the TV and Apple TV…

Wydruk około 4,56 €–5,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
2742
Polubienia
224
Ocena
5
P
PrintablesTinkrMakr

Prusa MK3S (MK3S+) Pi Camera V2.1 Mount With Optional X Axis Cable Strain Relief

Pi Camera V2.1 Mount With Optional X Axis Cable Strain Relief for the Prusa MK3S & MK3S+ Printers. Note: added mount for MK3S+ (MK3SPlus_X-Axis_Bracket_Pi_Camera_Mount v1.stl). This is the only part that differs from the original MK3S.…

Wydruk około 1,67 €–2,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
2669
Polubienia
521
Ocena
4,82
P
PrintablesMehTechArt

Nissan Skyline GT-R R34 Wall-mounted

Please click if you appreciate my work :) A cult icon. The Skyline R34 – now on your wall. This 3D printable wall-mounted model of the Nissan GT-R R34 brings the legendary JDM shape into a minimalist, display-ready form. Its signature…

Wydruk około 12,40 €–15,16 € nettoWstępna wycena jednego wariantu

Pobrania
2384
Polubienia
783
Ocena
5
P
PrintablesIBI Productions

AirTag bike saddle mount

This mount has been designed to conceal an airtag under a bike saddle, between the metal rods usually found under it. Why another bike saddle mount for airtags I know, there are numerous designs out already, exactly like this one, but all…

Wydruk około 1,23 €–1,50 € nettoWstępna wycena jednego wariantu

Pobrania
2381
Polubienia
447
Ocena
4,83
P
PrintablesPoulpi

Lego Saturn V wall mount

Wall mount for Saturn V Lego model composed of a base and a top clamp. Base: There is two options for the base: DETAILED version: Three stands wall mount base that sits below first stage boosters. Base has one solid 5mm mounting hole that…

Wydruk około 1,04 €–1,27 € nettoWstępna wycena jednego wariantu

Pobrania
2019
Polubienia
405
Ocena
4,84

Earth Rated Dog Poop Bags Roll Dispenser - Wall Mounted, No Supports Needed

Holds 10 rolls of bags and has screw holes to be wall mounted, or use two sided tape/Command Strips to attach. Bag rolls are about 30mm in diameter and 61mm wide, so this dispenser might work with others. Initially designed without the…

Pobrania
1874
Polubienia
588
Ocena
4,93
P
Printablesbasti30

Christmas decoration with traditional mounting

Simple Vase Mode Christmas decoration with traditional mounting hole. Take the mounting wire and cap of an old or broken Christmas ball and insert it in the cylinder. Available for 8mm, 10mm, 12mm and 16mm mounting cylinder. I used 8mm.…

Wydruk około 4,40 €–5,38 € nettoWstępna wycena jednego wariantu

Pobrania
1785
Polubienia
530
Ocena
4,93
P
PrintablesWeshape

Apple TV wall mount - 4K (1st gen & 2nd gen) also Apple TV HD

We designed this print, to get the Apple TV mounted to the wall. Must be mounted with 3 screws. Fits the following Apple TV models Apple TV 4K (First gen) Apple TV 4K (Second gen) Apple TV HD . Does NOT fit the TV 4K third generation! For…

Wydruk około 3,71 €–4,53 € nettoWstępna wycena jednego wariantu

Pobrania
1570
Polubienia
145
Ocena
5
P
PrintablesCVD

Toothbrush + Induction Charger Wall Mount (Oral-B & Philips Sonicare)

At long last, the electric toothbrush has a functional, aesthetic and permanent place in the bathroom- and it's not the sink countertop! The induction charging base, which used to only appear during weekly recharging, nests perfectly in…

Wydruk około 2,78 €–3,40 € nettoWstępna wycena jednego wariantu

Pobrania
1376
Polubienia
250
Ocena
4,88
P
PrintablesPeter Farell

Predator Head Trophy Wall Mount

Predator Head Trophy (Wall Mount) Just found out about the negative parts you can add in the Prusa slicer add parts gallery. This is very useful.

Wydruk około 21,30 €–26,03 € nettoWstępna wycena jednego wariantu

Pobrania
1211
Polubienia
277
Ocena
5
P
Printablesschwa

iMac Pro Continuity Camera Mount

A mount to use your iOS 16 MagSafe equipped iPhone as a Continuity Camera for an iMac Pro. See https://www.theverge.com/2022/6/7/23158510 for more information. Link to original .shapr source file.…

Pobrania
1182
Polubienia
71
Ocena
5
P
PrintablesTinkrMakr

Prusa Mini (Mini+) Raspberry Pi Camera Module V2.1 8MP Mount With X Axis Strain Relief

Prusa Mini and Mini + Raspberry Pi Camera Module V2.1 8MP Mount With X Axis Strain Relief. The mounts I could find did not give me the angle that I wanted. I like to have a clear view of the nozzle. Added x axis strain relief to…

Wydruk około 1,17 €–1,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
1179
Polubienia
287
Ocena
4,97
P
PrintablesRobC

Tablet Tripod Mount

I remixed this tablet tripod mount and made the following changes: Increased the thread size on the post and nut for an easier fit. Redesigned the main post for horizontal printing without supports. Redesigned the clamp to match the…

Wydruk około 2,39 €–2,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
1134
Polubienia
120
Ocena
4,8
P
PrintablesPhilippHee

Dyson V11/V10/V8/V7 Accessory Mount/Holder / Zubehörhalterung

Dyson V11/V10/V8/V7 Accessory Mount/Holder Additional double holder for Dyson accessories as wall mounting. This mount has only been tested with the V10, but it should also work with the V7, V8 and V11. This is a remix (original is from…

Wydruk około 3,51 €–4,28 € nettoWstępna wycena jednego wariantu

Pobrania
1123
Polubienia
110
Ocena
4,96
P
PrintablesBerntzone

Prusa Mini Raspberry Pi Camera V2.1 Mount [THICC]

A Remix of Tinkr3d's great pi camera mount for the Prusa Mini. I realized my Pi Camera was raised about 2mm at the sensor, which made it impossible to fit in the original design. This design should now take this kind of Pi Camera…

Wydruk około 1,19 €–1,45 € nettoWstępna wycena jednego wariantu

Pobrania
1115
Polubienia
138
Ocena
4,74
P
PrintablesGurtKnev

DJI MAVIC AIR 2 10" tablet mount

Adapter for mounting a tablet in the phone mount of the DJI Mavic air 2 controller. This design should fit most 10 inch tablets. Print instructions Model needs supports to be printed. works best oriented on its side for strength. printed…

Pobrania
1077
Polubienia
81
Ocena
4,93
P
Printableskarelv

Prusa i3 MK3s Raspberry Pi4B case profile mount for octopi

My first remix design for a 3D print! I added the hooks to the case such that it can be screwless mounted to the horizontal profiles at the bottom of the prusa MK3s printer. RPi4B case:…

Wydruk około 2,12 €–2,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
1051
Polubienia
174
Ocena
4,84
P
Printablesschwa

MacBook Pro Continuity Camera Mount

A mount to use your iOS 16 MagSafe equipped iPhone as a Continuity Camera for an MacBook Pro. See https://www.theverge.com/2022/6/7/23158510 for more information. Link to original .shapr source file.…

Pobrania
1047
Polubienia
85
Ocena
4,8
P
PrintablesWeshape

Apple TV wall mount - 4K (3rd generation)

Simple wall mount for your Apple TV, so it doesn't have to lie and float, but can instead hang neatly on a wall. Fits Apple TV bracket 4K (3rd generation) ATTENTION Does not fit the older models! Apple made the 3rd generation 4K slightly…

Wydruk około 2,69 €–3,28 € nettoWstępna wycena jednego wariantu

Pobrania
1002
Polubienia
46
Ocena
5
P
PrintablesAndrew Fiorello

Ender 3 V2 Neo X Axis Camera Mount

This is a webcam mount for an Ender 3 V2 Neo printer. It's made to press fit over the X Axis bracket and belt cover on the right hand side of the printer while leaving access to the belt tensioner knob. You'll need a screw to mount the…

Wydruk około 1,32 €–1,61 € nettoWstępna wycena jednego wariantu

Pobrania
942
Polubienia
94
Ocena
4,83
P
PrintablesAdam Oellermann

Logitech C270 Tripod Mount

A simple tripod mount for the Logitech C270 webcam. With so many churches needing to stream services because of the COVID-19 lockdowns, and a shortage of webcams, I hope this will help someone deploy their old C270 - a decent camera,…

Wydruk około 0,42 €–0,51 € nettoWstępna wycena jednego wariantu

Pobrania
921
Polubienia
87
Ocena
5
P
PrintablesColgS3b

Nikon lens end cap F mount

Cover for the mount side of Nikon lenses. Tested with: AF-S NIKKOR 16-80mm 1:2.8-4E ED NIKKOR-S Auto 1:1.4 f=50mm NIKKOR-Q Auto 1:3.5 f=135mm Rokinon 1:1.4/85mm AS IF UMC Designed in FreeCAD Print instructions Print with the open side up.…

Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu

Pobrania
817
Polubienia
72
Ocena
4,4
P
PrintablesSeppo

Smartphone Stand tripod Stativ Modular Mounting System

This is a very practical smartphone stand / tripod, wich is perfect in many usecases. For assembly, you will need: 1x M5 65mm bolt 2x M5 25mm bolt 3x M5 nut Feel free to share your own experiences with the community! This smartphone stand…

Wydruk około 5,36 €–6,55 € nettoWstępna wycena jednego wariantu

Pobrania
815
Polubienia
105
Ocena
4,8
P
PrintablesNeonLabs

Parametric Continuity Camera Mount

The new continuity mode for iOS and MacOS allows anyone to turn their iPhone into a webcam. The problem is not everyone has an Apple Studio Display or another specific display. The same goes for iPhone models and phones with cases. The…

Pobrania
754
Polubienia
72
Ocena
5
P
PrintablesGurtKnev

DJI MAVIC AIR 2 8" tablet mount

Adapter for mounting a tablet in the phone mount of the DJI Mavic air 2 controller. This was designed to fit a Lenovo tab4 8 inch tablet, but might also fit 7 - 9 inch tablets. Print instructions Model needs supports to be printed. works…

Pobrania
711
Polubienia
73
Ocena
5
P
PrintablesPhysics Dude

Macro lens adapters for Nikon F-mount

Look at those two sample pictures! Wow! You can now give any Nikon F-mount lenses or adapters a super macro super power! UPDATE: Added a new retention ring for lens-side mounting. No tools or rubber bands needed! Just snap it onto any…

Wydruk około 1,80 €–2,20 € nettoWstępna wycena jednego wariantu

Pobrania
709
Polubienia
116
Ocena
4,9
P
Printablesrsdesign

Airtag Bike Saddle Mount with M3 Heatinsert for Ergon and SQLabs saddles

Using this mount on my ERGON mtb saddle, also changed the mounting for SQLabs. Top and bottom pieces are now in one .3mf file. So download the one the suits you saddle. (I tested these on MTB saddles, so your mileage may vary.

Wydruk około 0,79 €–0,96 € nettoWstępna wycena jednego wariantu

Pobrania
689
Polubienia
78
Ocena
5
P
Printableselod

Trustmaster T300RS and Logitech G29 pedal to Playseat challenge mount

v2 of the mount, very easy and fast to install with 8 large zip ties and 4 pcs M6 x25 screws the Logitech G29 pedal to Playseat challenge seat Also working with Thrustmaster t300 RS Print instructions PETG, print 2 times the G code or 4…

Wydruk około 1,78 €–2,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
617
Polubienia
60
Ocena
5
P
PrintablesVisualReversal

Dual Screw Mounting Brackets for Govee Permanent Outdoor Lights - Model H705

Made at the request of a Printables community member, these mounts are a traditional mounting bracket with dual offset screw points. These mounts are best used with typical flat bottom soffits. If you have angled soffits or rafter tails,…

Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu

Pobrania
614
Polubienia
48
Ocena
5
P

iPhone Monitor Mount for Apple Continuity Camera

Here is my iPhone Monitor Mount, the perfect solution for using your iPhone as a webcam during Zoom and other FaceTime calls. This mount is designed to work with a Viewsonic monitor and may work with a variety of other monitors. This…

Pobrania
610
Polubienia
29
Ocena
5
P
PrintablesFotone

Raspberry Pi Camera Mount for Prusa MK3 S

Ho disegnato un supporto, leggerissimo, da collegare ad incastro sull'asse Z per la Raspberry Pi camera e la stampante Prusa MK3S e credo anche MK3. È formato da tre pezzi e si stampano tutti senza supporti in orizzontale. La Pi camera è…

Wydruk około 3,38 €–4,13 € nettoWstępna wycena jednego wariantu

Pobrania
604
Polubienia
86
Ocena
4,86
P
Printableseagereyes

Pinhole for Nikon Z-Mount

A pinhole "body cap" for Nikon Z-mount. The printed parts are just the holder for the actual pinhole, you'll have to make one or buy one on Ebay (I got mine from fireseller66, a .15mm). Printed in black PLA, it's completely light tight…

Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu

Pobrania
594
Polubienia
65
Ocena
5
P
PrintablesC3PO

wall mount for Sonos Beam

I was using the cheapest PLA on the planet because you will not see the holders behind the speaker. But I'm pretty sure the print quality can be improved with better filament and maybe supports (haven't tested). CAUTION! Definitely print…

Wydruk około 2,33 €–2,85 € nettoWstępna wycena jednego wariantu

Pobrania
567
Polubienia
43
Ocena
5
P
Printablesbgh

Quad Lock mount for Yamaha MT07 FZ07

Just a simple mount for Quad Lock with dampeners for a Yamaha MT-07 with LCD-display. It has a structural design and should be pretty sturdy, but I take no responsibility if it breaks ;) It requires a M5 heat insert, I use M5x9,5x7 mm.…

Wydruk około 1,93 €–2,36 € nettoWstępna wycena jednego wariantu

Pobrania
562
Polubienia
35
Ocena
5
P
PrintablesTipTop

DJI RC Mounting Plate (e.g. for bikes and bicycles)

This mounting plate results in a very robust mount for the DJI RC remote control, such as those offered for the DJI Mini 3 Pro drone. The mount is tailored to the remote control and intended for outdoor use, especially on bicycles. Note:…

Wydruk około 1,19 €–1,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
557
Polubienia
86
Ocena
0
P
PrintablesDaHouzKat

Prusa MINI Articulated Raspberry Pi Camera Mount REMIX

This is a REMIX of the Articulating Raspberry Pi Camera Mount for the Prusa Mk3 Note that i did not modify or create new components, i assembled some components together to obtain a simple Raspberry Pi Camera Mount for the Prusa Mini Thx…

Wydruk około 1,80 €–2,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
554
Polubienia
132
Ocena
4,97
P
PrintablesZurrie

Nikon fmount lens to MFT m43 camera body

Print in PETG for complient flex of the F-mount print in BLACK to absorb any stray light. Have fun big hugs bye

Wydruk około 2,09 €–2,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
537
Polubienia
34
Ocena
5
P
PrintablesMathieu

Castle Mountain (Multicolor/Multimaterial)

EDIT 1: (Featured in the Prusa YouTube video about 3MF files!) EDIT 2: (Also featured in Weekly 3D Prints #47!!!) This serves as a sequel to my recently-published Castle Tower. I began an introductory course with Autodesk Maya and decided…

Pobrania
530
Polubienia
88
Ocena
5

Smartphone mount for indoor rowing machine (Concept2 Rower PM5 monitor)

You want to use your smartphone on a Concept2 indoor rowing machine, and not ruin your posture while doing so? Now you can! As a rowing coach I did not like it when my rowers put their smartphone on the handlemount, because it makes them…

Pobrania
501
Polubienia
49
Ocena
5
P
PrintablesWhistleR

Makita charger wall mount (easy removable)

Makita charger (DC18RC) easy removel, easy to maunt whit the tamplate. Maunt the template Put the 4 wall mounts in to the template Maunt the feet on the charger Or use them to what ever you see fit

Wydruk około 4,34 €–5,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
493
Polubienia
182
Ocena
5
P
PrintablesBlownUpp

ADXL345 mount for FLsun Super Racer

I wanted a secure way to mount the sensor with stock hardware, sine the other mounts for the Super Racer were just integrated or dependent upon custom effectors and hot ends. I also didn't want to make any permanent changes to the…

Wydruk około 0,57 €–0,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
486
Polubienia
38
Ocena
5
P
PrintablesMehTechArt

Mitsubishi Lancer Evolution V Wall-mounted

Please click ❤LIKE❤ if you appreciate my work 😊 The rally legend – now on your wall. This 3D printable model of the Mitsubishi Lancer Evolution V is a tribute to one of the most aggressive and iconic 90s performance cars. Wide fenders, a…

Wydruk około 13,87 €–16,96 € nettoWstępna wycena jednego wariantu

Pobrania
480
Polubienia
203
Ocena
4
P
PrintablesNathanK

Non-MagSafe IPhone Continuity Camera Mount for MacBook Pro

This is a remix of samlovecroc's “Non-MagSafe iPhone Holder for Continuity Camera” that will support the MacBook Pro's screen depth and larger iPhones including those with cases on. The form of samlovecroc's design is preserved the…

Pobrania
461
Polubienia
42
Ocena
3
P
Printablestwiss

Prusa MK4/MK4S Camera Mount

Crafted with a versatile 1/4"-20 configuration, this camera mount effortlessly harmonizes with a wide range of compatible tripods and photographic equipment, guaranteeing seamless compatibility. For attachment to the MK4 chassis, I…

Wydruk około 1,07 €–1,30 € nettoWstępna wycena jednego wariantu

Pobrania
458
Polubienia
146
Ocena
5
P
PrintablesMehTechArt

Mustang Shelby GT500 Flat Wall-mounted

Please click ❤LIKE❤ if you appreciate my work 😊 American power – now on your wall. This 3D printable flat-cut wall art model of the Ford Mustang Shelby GT500 brings the raw muscle car spirit into your interior. With its iconic hood and…

Wydruk około 3,04 €–3,72 € nettoWstępna wycena jednego wariantu

Pobrania
432
Polubienia
143
Ocena
5
P
PrintablesBiTN

TP-Link Tapo C100/C110 GoPro mount

GoPro mount for TP-Link Tapo C100/C110 IP camera Print instructions Category: Camera Summary GoPro mount for TP-Link Tapo C100/C110 IP camera Print Settings Printer: Prusa MINI Rafts: Doesn't Matter Supports: Yes Resolution: 0.15 Infill:…

Wydruk około 0,74 €–0,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
432
Polubienia
48
Ocena
5
P
Printablesvolly

IKEA KOPPLA slide- / tail-mount

Print recommendations no support needed print with the smallest side on the bottom for optimal results position the model with the long side in the same direction as the printers base plate is moving while printing Will match to IKEA…

Pobrania
431
Polubienia
61
Ocena
5
P
PrintablesAladoW

Double Universal Out-front Mount Garmin / Double Support frontale Garmin

Double Universal Out-front Mount, for Garmin accessories. Use m3 screw/nut to close the fixation. V2 : rework fillet on fixation to the bike Printed in 0.2mm layer height, 20% filling with PLA+

Wydruk około 2,43 €–2,97 € nettoWstępna wycena jednego wariantu

Pobrania
425
Polubienia
43
Ocena
4,4
P
PrintablesGyoenastaader

ASIAIR Losmandy Mount

The hole pattern is 4xM4 20 mm cross. Matches the hole pattern on the bottom of the ASIAIR. Instead of mounting the air straight to the mount, you can mount the saddle and shoe the ASIAIR comes with. You'll need one M4x20 screw and nut…

Wydruk około 1,60 €–1,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
421
Polubienia
34
Ocena
5
P
Printableszbuser

Alesis Electronic Drum Clamp Mount

This drum mount is sized for any Alesis brand electronic drumset. its made to clamp a 38mm tube on the big clamp and a 19mm tube on the small one. It is printed in two parts and epoxied together so that each clamp can have the optimal…

Wydruk około 6,35 €–7,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
418
Polubienia
50
Ocena
5
P
PrintablesOliver Thomsen

GoPro like mount for bike saddle

I've also created a GoPro compatible mount for the rails of a bike saddle in order to use it with my SIGMA BLAZE mount ( https://www.prusaprinters.org/prints/61869-sigma-blaze-mount-gopro-compatible ). The mount snaps on top of the rails…

Wydruk około 0,78 €–0,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
409
Polubienia
74
Ocena
4,75
P
Printableslars

Nikon F mount microscope adapter

I wanted to mount my DSLR to an old Olympus VMT microscope. Found a fitting camera attachment (on ThingiVerse) and made a remix with a fitting cylinder for the microscope. Also made one for a cheap Bresser Microscope (but it doesn't…

Wydruk około 2,31 €–2,83 € nettoWstępna wycena jednego wariantu

Pobrania
388
Polubienia
44
Ocena
5
P
Printablesbjamdesign

Bike - Wall Mount for Thru-axle bikes

A mount to support a thru-axle bike vertically against a wall. Take off your front wheel, roll your bike to the wall, and push. Important Notes - Use at your own risk. Be aware of cranks/pedals! Pedals will inevitably ding a wall, your…

Wydruk około 7,97 €–9,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
385
Polubienia
83
Ocena
5
P
PrintablesEttil Vrye

Brompton Apple Airtag Rear Light Mount

This is a small Apple Airtag mount for the original rear light-reflector of the 2022 Brompton folding bicycle. I don't wanted to put it under the saddle so I searched for another place where I can put it. I designed it so the seat post…

Wydruk około 0,19 €–0,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
382
Polubienia
53
Ocena
5
P
Printablesian123411

camera mount

camera mount hooks on to the side of the extrusion on the Prusa i3 mk3s I have a magnetic base on my camera so I have screwed the metal plate that came with it which holds it in place or it can just sit on top the last picture is the view…

Wydruk około 3,15 €–3,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
381
Polubienia
57
Ocena
5

HelloBaby Baby Monitor Mount Adapter

This should work with the HelloBaby camera models: HB6550/ HB65/ HB6339/ HB40/ HB6081/ HB66/ HB6351 (but it was only tested on the HB6550Pro model). The original adapter to HelloBaby flex mount broke for me, so I made this to replace it.…

Pobrania
363
Polubienia
16
Ocena
0

Articulated mount Sonoff SNZB-03 Zigbee motion sensor

The 3D printed mount is designed to perfectly fit the Sonoff SNZB-03 Zigbee motion sensor, ensuring a snug and secure fit. Whether you prefer a more permanent installation with screws or a flexible and removable option with magnets, this…

Wydruk około 1,14 €–1,40 € nettoWstępna wycena jednego wariantu

Pobrania
360
Polubienia
64
Ocena
4,75
P
PrintablesKent Prints

Nest Cam (outdoor or indoor, battery) mount plate

This is a mount plate for the Nest Cam (outdoor or indoor, battery) https://store.google.com/product/nest_cam_battery?hl=en-US Google don't/won’t sell these. Pictured at 3:26 in the video above. https://youtu.be/x2-RRXMj-cs?t=206…

Pobrania
350
Polubienia
27
Ocena
5
P
PrintablesTych0

ASIAir+ Tripod Mount

Introduction: I wanted a way of mounting my AAP to my tripod, and then I remembered I have a 3D printer! This clamp mount is a fairly simple, but a secure and effective way of relocating your ASIAir/Pro/Plus to a 1.75" diameter tripod leg…

Wydruk około 3,25 €–3,97 € nettoWstępna wycena jednego wariantu

Pobrania
339
Polubienia
31
Ocena
0
P
PrintablesAnheledir

ESP32-Camera arm-mount for MK3/MK4 and other 3030 aluminium extrusions w/ t-nuts

This is a pre-arranged and pre-supported collection of all necessary parts to print a case for the ESP32-Camera with a side-arm mount on the 3030 Extrusion of the MK3 and MK4, and t-nuts that don't need disassembling of the printer to…

Wydruk około 5,39 €–6,58 € nettoWstępna wycena jednego wariantu

Pobrania
330
Polubienia
47
Ocena
4
P
PrintablesJeffL

HP USB-C/A Universal Dock G2 Thunderbolt DisplayLink Wall Mount

This is wall mount for the HP USB-C/A Universal Dock G2 Thunderbolt DisplayLink. See link for more details on the dock. https://www8.hp.com/h20195/v2/GetPDF.aspx/4AA7-5549ENW.pdf Printed in PETG, no supports required.

Wydruk około 5,27 €–6,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
327
Polubienia
31
Ocena
5
P
Printablesrursache

TP-Link Tapo C100/C110 mount for Elegoo Neptune 4 Pro

How to Print all the gcode files or more explicitly: 2 x nut.stl 1 x arm.stl 1 x base.stl 1 x mount.stl arm.stl must be printed with 100% infill so it's strong and doesn't break when adding the nuts. supports are not needed Preparing the…

Wydruk około 0,33 €–0,40 € nettoWstępna wycena jednego wariantu

Pobrania
326
Polubienia
55
Ocena
4,25
P
PrintablesNlKO33

truelife NannyCam V24 mount

Truelife NannyCam V24 Mount Easy way to mount the cam to anything smaller than 25mm. Suggest 0.1 layer height for thread precision *update 13/01/21 - added a deeper bore version (original is 7mm, long version is 14mm deep) as per…

Wydruk około 1,06 €–1,29 € nettoWstępna wycena jednego wariantu

Pobrania
326
Polubienia
12
Ocena
4,83
P
PrintablesMordiev

Hanging Mount for Rubbermaid 21 cup Drybox

This simple mount allows you to hang your drybox from the underside of a shelf or enclosure. Print instructions .2 mm layer height 3 or more perimeter walls This is a remix of this thing on Thingiverse by customyota . Mine has a tighter…

Wydruk około 2,23 €–2,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
309
Polubienia
65
Ocena
4,8
P
PrintablesSylvain

Unify USW 8 Lite Poe Powerbrick Mount

Unifi Switch Lite 8 port POE based on remix of Unifi Flex XG power Brick wall mount by RockNLol I just resized model to adapt to power brick of the switch (115% bigger)

Wydruk około 2,58 €–3,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
308
Polubienia
20
Ocena
5
P
PrintablesEric T

Skadis T-Clip XL Tape Measure Mount

I like the ease of printing of the Skadis T-Clip design but could not find a tape measure holder that was large enough so I designed my own. This will hold a tape measure 47mm deep. The T-Clips can be found below. Be aware that the…

Wydruk około 2,52 €–3,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
306
Polubienia
51
Ocena
5
P
Printablesarcanelayers

Apple TV 5th Gen Remote Holder for Under Table or Wall Mount

Overview Hi everyone! This is a simple model I made that allows the Apple TV 5th Gen remote to be mounted to a table, wall, or anywhere else you can think of! It has two countersunk m4 holes to allow it to be screwed to something. I…

Wydruk około 1,85 €–2,26 € nettoWstępna wycena jednego wariantu

Pobrania
303
Polubienia
30
Ocena
5
P
Printablesdom.3D

BMD MicroConverter mount

Bracket to mount a BlackMagicDesign Micro Converter (SDI-HDMI) on a surface.

Wydruk około 1,54 €–1,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
296
Polubienia
36
Ocena
0
P
Printablesbjamdesign

Bike - Cateye rear light saddle rail mount

I needed a dropper compatible under saddle mount for my cateye rapid mini. I really liked my solution for Ergon Saddles , and copied the design over to the saddle rail interface from this solution . IMPORTANT NOTE : PETG will creep, I…

Pobrania
289
Polubienia
31
Ocena
0
P
PrintablesAtle Berg

Unifi USW Flex Mini Wall Mount

Remix of model by Paul-Vincent Roll. Made to be mountable on regular wall with screws instead of on pegboard.

Wydruk około 1,43 €–1,75 € nettoWstępna wycena jednego wariantu

Pobrania
282
Polubienia
20
Ocena
5
P
PrintablesRanchBear

LEGO Technic Porsche 911 RSR #42096 Wall Mount (Spoiler Up)

Vertical Wall mount for LEGO Technic Porsche 911 RSR #42096 (Spoiler UP), designed to used with Large Command Velcro adhesive strips Taking the 2 Black skid pads at the bottom helps it to sit closer to the wall You can move the stickered…

Wydruk około 1,43 €–1,75 € nettoWstępna wycena jednego wariantu

Pobrania
278
Polubienia
36
Ocena
0
P
Printablesstoneburner

Continuity Macbook pro Magsafe Mount

This is supposed to be used to hold your iphone above your macbook pro in order to use its camera as webcam. If you use a non apple magsafe charger with a slightly different diameter you can adapt the size in openscad.

Pobrania
264
Polubienia
51
Ocena
5
P
Printablesbjamdesign

Bike - Ergon saddle Cateye light mount

A rear bike light mount specifically for the Cateye rear lights (specific models below) to mount under an Ergon QuickClick supported saddle. Ultralight and sturdy! Saddles Ergon saddles with Topeak's QuickClick mount. Locate a threaded…

Wydruk około 0,68 €–0,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
261
Polubienia
33
Ocena
5
P
PrintablesLeokaldzik

Bicycle holder for the JBL GO 2 speaker | JBL speaker mount

!!! To avoid scratching the frame, it is best to line the center with something soft (old handlebar tape, bicycle inner tube). !!! Maximum pipe width 40mm, height depends on the screws used (you can print) Sample link:…

Wydruk około 1,38 €–1,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
251
Polubienia
93
Ocena
4
P
PrintablesNewTeq

LEGO Discovery Space Shuttle Wall-mount - Without support

Space Shuttle wall mount I redesigned the model from JLevin to print it without support. Print settings: PLA / PETG (recommend) min. 20% infill To fix it on the wall, I used screws with a 5mm diameter. I also recommend some higher angle…

Wydruk około 4,18 €–5,11 € nettoWstępna wycena jednego wariantu

Pobrania
238
Polubienia
39
Ocena
0
P
Printablesnero82

Philips Hue motion sensor mount

Here I have created a small angled mount for Philips Hue motion sensors. The mount is meant to be used together with the original mount. It should be possible to fix it with a screw or some kind of glue. For my picture I used an adhesive…

Wydruk około 0,54 €–0,65 € nettoWstępna wycena jednego wariantu

Pobrania
238
Polubienia
21
Ocena
5
P
PrintablesKlaus

Einhell Agillo Cordless Scythe wall mount / Wandhalterung Akku Motorsense

This wall mount is designed for Einhell Agillo 36/255 and the original accessories and tools, but may also fit for other scythes. I used PETG, 3 perimeters and 0,2 layer height. Happy printing!

Wydruk około 7,76 €–9,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
238
Polubienia
24
Ocena
5
P
PrintablesRyan-N2YQT

DJI Mavic Air 2 8" tablet mount for iPad Mini, etc.

This is a remake of GurtKnev's 8" tablet holder that is a little narrower to better fit my case. YOU MUST USE SUPPORTS I ignored supports in my first print by accident, but the piece was designed so well that it still worked fine, even…

Pobrania
232
Polubienia
25
Ocena
0
P
Printables100prznt

Hue MotionSensor Corner-Mount

A mount that allows the Philips Hue MotionSensor to be installed in a corner.

Pobrania
232
Polubienia
30
Ocena
5
P
PrintablesPBJ

Space Saving - Outlet or Light Switch Mounted -Tooth Brush Holder

The “ Space Saving - Outlet or Light Switch Mounted -Tooth Brush Holder ” attaches to the right or left of a decorated or plain electric socket or light switch cover. The decorations on the covers are simple Greek inspired floral…

Wydruk około 2,10 €–2,56 € nettoWstępna wycena jednego wariantu

Pobrania
227
Polubienia
88
Ocena
5
P
Printablesmih

Lenovo TAB M10 FHD Plus Wall Mount with Charging

Wall mount for tablet lenovo M10 FHD plus with the possibility of inserting a charging cable with the charger embedded in the installation box in the wall. The box is composed of two parts, after taking off the top part, the tablet can be…

Wydruk około 15,22 €–18,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
223
Polubienia
15
Ocena
5
P
PrintablesMehTechArt

BMW 850 CSi E31 Wall-mounted

Please click ❤LIKE❤ if you appreciate my work 😊 The Bavarian V12 masterpiece – now on your wall. This 3D printable model of the iconic BMW 850 CSi (E31) offers a sleek, minimalist tribute to one of the most elegant and powerful grand…

Wydruk około 11,64 €–14,22 € nettoWstępna wycena jednego wariantu

Pobrania
221
Polubienia
62
Ocena
5
P
PrintablesWittmarch

Wall mount for filament/spool holder, IKEA PLATSA

Filament holder wall mount for Ikea PLATSA, need the "Filler - Filament Holder" Remixed from this wall mount: https://www.thingiverse.com/thing:4397167

Wydruk około 5,60 €–6,84 € nettoWstępna wycena jednego wariantu

Pobrania
220
Polubienia
40
Ocena
5
P
PrintablesDominik

Sonoff Zigbee 3.0 Dongle Skadis Mount

Based on whocares333's Sonoff Zigbee 3.0 Dongle Mount. I added two hooks to mount this sideways on a Skadis peg board. Printing needs some supports for the holding brackets and the Skadis hooks.

Wydruk około 0,76 €–0,92 € nettoWstępna wycena jednego wariantu

Pobrania
219
Polubienia
31
Ocena
5
P
Printablessh

GoPro Mount Base FOR WIDE angles (import this into your GoPro Mount design)

Modification of original for: better angles of camera adjustments (on both sides) camera can be fixed in about 180 degrees Adapter itself: massive on both sides - this is IMPORTANT against other adapters - not to be broken during…

Wydruk około 0,56 €–0,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
217
Polubienia
8
Ocena
0
P
PrintablesBUDS3D

NEST CAM INDOOR/OUTDOOR DESK /SHELF MOUNT

GOOGLE NEST CAM DESK/TABLE/ SHELF ANY FLAT SURFACE MOUNT. CREATED THIS FOR MY BATTERY NEST CAM. TWO PIECE DESIGN, TOP SNAPS INTO BOTTOM FOR A TIGHT FIT, IF YOU LIKE YOU CAN ADD 2 DROPS OF SUPERGLUE FOR A PERMANENT FIT. LISTED ARE TRIED…

Pobrania
217
Polubienia
19
Ocena
5
P
Printableslmilekic

Lego Discovery Wall Mount

To fit on the mini+ build plate you need to tilt it back and add supports. You shouldn't actually need any supports on the back, but PrusaSlicer likes to add a few random ones. Aside from that, just print and screw into the wall. It fits…

Wydruk około 13,84 €–16,91 € nettoWstępna wycena jednego wariantu

Pobrania
216
Polubienia
28
Ocena
5
P
Printablespatrickzell

Mount for bicycle backlight under saddle

Mount for a small battery led backlight under your bikes saddle

Wydruk około 1,08 €–1,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
213
Polubienia
34
Ocena
5

Traxxas 4tec 2.0 Chassis Spoiler Mount

*New Update just up-loaded: 01-22-2025 “File name labeled with UPDATE-v2.” See file for further update details. **New Update just up-loaded: 02-01-2023 “File name labeled with UPDATE.” See file for further update details. ***Had to brace…

Wydruk około 3,02 €–3,69 € nettoWstępna wycena jednego wariantu

Pobrania
203
Polubienia
17
Ocena
5
P
Printablessascha

Nvidia Shield TV 2017 / 2019 Pro VESA 100 mount

This mount is meant to to be mounted to a 100x100 VESA mount.

Wydruk około 3,64 €–4,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
203
Polubienia
23
Ocena
0
P
Printableschrisxbarb

Wall mount for shower squeegee | Aufhänger für Duschabzieher

Quick and easy print for a shower squeegee wall mount. Printed it from PETG and mounted it with double-sided tape (didn't want to drill holes in the walls). Works since months. If you like it, give me a like and post your make! Enjoy and…

Wydruk około 1,59 €–1,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
200
Polubienia
23
Ocena
5
P
PrintablesApproxit

Arducam IMX219 Auto Focus Camera Module cover for Articulating Raspberry Pi Camera Mount

After I replaced my stock camera module with Arducam IMX219 Auto Focus Camera Module , I found out that it can't fit in cover provided in Articulating Raspberry Pi Camera Mount. So I took its step file and aligned camera module hole by…

Wydruk około 0,52 €–0,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
199
Polubienia
20
Ocena
5
P
PrintablesoXiVanisher

Chipolo one tracker mounts for bike saddles

Use m3 x 12 mm screws and nuts to mount the trackers. The designs are for the following saddles: Ergon Large (4 screws) Selle Royal Ariel (2 screws) Edit 8.6.2026: Upload new Selle Royal Ariel version, since the last might be too snug for…

Wydruk około 0,73 €–0,89 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
198
Polubienia
21
Ocena
5
P
Printables100%FAT

ZOTAC ZBOX 1060 VESA Mount Bracket

We created this bracket for the ZOTAC ZBOX Mini PC to use in our interactive table made for Sekisui Plastics. The bracket allows any of the previous and current ZBOX Mini PC's to be mounted to any surface. The VESA mount holes on the…

Wydruk około 15,28 €–18,67 € nettoWstępna wycena jednego wariantu

Pobrania
196
Polubienia
7
Ocena
0
P
Printablest0b1

Koppla wallmount

Mounting bracket for IKEA KOPPLA power strips. This is a rather trivial remix of @telegnom's Koppla Wallmount (Euro Version): https://www.thingiverse.com/thing:1687838/ Thanks @telegnom for sharing. ☺ Edit: I have added the OpenSCAD file…

Pobrania
194
Polubienia
29
Ocena
5