Liczymy pasujące modele…
When I didn't find hooks in sizes I needed I created a set of hooks in the following sizes: 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95 and 100mm. The hooks are click hooks. Recommended print settings (same as…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena jednego wariantu
Click connector plate for attaching power supply units or power strips to Multiboard with cable ties. (Matching the “Underware” cable management system from HandsOnKatie.)
Wydruk około 1,41 €–1,72 € nettoWstępna wycena jednego wariantu
Multiboard bottle holders with open bottom in sizes from 25mm to 120mm. The bottle holders uses the flexible MultiConnect connector. Just attach MultiConnect connectors to your board and then mount the bottle holder on these connection…
Wydruk około 0,89 €–1,09 € nettoWstępna wycena jednego wariantu
Simple / minimal multiboard tool holders in various sizes. Width 10 - 75 mm Depth 10 - 25 mm Use the parametric Autodesk Fusion fusion model for other sizes. Requires one of the Multiboard Snaps to click into. Recommended print settings…
Wydruk około 0,19 €–0,24 € nettoWstępna wycena jednego wariantu
A holder to keep opened 0.5 g and 3 g super glue tubes in a standing position to prevent then from clogging. Requires one of the Multiboard Snaps to click into. Thanks to Jonathan ( KeepMaking ) for creating multiboard
Wydruk około 0,78 €–0,96 € nettoWstępna wycena jednego wariantu
Print orientation as it is on the file. No supports needed. Tested with Grillon3 PLA (Argentina), 0.4 nozzle and 0.2 layer height in a Ender 3 v2 Neo.
Wydruk około 2,48 €–3,04 € nettoWstępna wycena jednego wariantu
For the MultiBoard system. This is a medium press fit holder for a glue bottle (Magigoo) or large glue stick. I printed with paint-on supports under the clips of the label holder. Label is printed with two colors on an MK4 without MMU,…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Multiboard bins of various sizes. Intended to have two rows inbetween the common 8 by 8 with quad connectors. Connected to a multiboard with 9mm threads to have it really attached solidly. Compactly fit next to each-other (within 3…
Wydruk około 4,74 €–5,79 € nettoWstępna wycena jednego wariantu
Mount for Digital Micrometer – Multiboard Wall System I designed this custom-fit holder for my digital micrometer — a great and affordable model available on Amazon (link below). The tool was often lying around on my workbench, which…
Wydruk około 0,64 €–0,78 € nettoWstępna wycena jednego wariantu
This is a shelf, designed to attach to a Multiboard panel, that holds 2x, 110 gram Isobutane camp stove fuel cans (jetboil, pocket rocket, etc) - I have 2 versions. 1 that uses the small-thread fix point bolts, and a 2nd version that uses…
Wydruk około 14,64 €–17,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I took a 2x1 CU basic shelf and added the slab with holes and embossed sizing. Print as is no supports.
Wydruk około 4,34 €–5,31 € nettoWstępna wycena jednego wariantu
To get the lab power supply out of the way when not in use, I needed a box to cover it up in a dusty environment at the workshop. This model was designed specifically for the Velleman LABPS3003SM power supply , but it actually got a bit…
Wydruk około 9,06 €–11,07 € nettoWstępna wycena jednego wariantu
Two boxes to hang a Luxorparts Pro 60 W soldering station on a Multiboard wall. It consists of a box for the power unit and another box for the soldering iron. The boxes have cutouts for the cords going between the iron and power unit,…
Wydruk około 2,90 €–3,55 € nettoWstępna wycena jednego wariantu
Important announcement: I released version 2 of the multiconnect system for multiboard . This version is fully compatible , but also incorporates some handling and versatility improvements. I recommend to always print the new versions.…
Generic connectors to hang your bins/shelves or anything else to your multiboard, now in version 2. The connector is pretty generic and allows you to attach anything you want. Note: There also is a flush version of multiconnect for…
About: Want to attach your existing gridfinity bins to your new multiboard wall or just use the existing containers you already printed? This is just the right solution for you. Just download some multiboard connector , connect it to your…
Update ****** Additional Version to add Multiconnect version from @DavidD V2 - Multiboard Multiconnect Caliper Holder Layer: 0.20mm Infill: 15% Support: Yes (Lines) Bed Adhesion: None or Skirt Speed: 180mm/s Wall Line Count: V1 -…
Every multiboard needs to have some bins to put stuff in. Need any useable size you can just attach end easily remove, use the multiboard bin system. Note: You may also like the open bins I created, which allow easy front access. Also you…
LED-Frame 2.0 for IKEA SKADIS pegboard 🚀 FINALLY I can share the multi-board version of my LED-Frame. It's controlled by an ESP32-Controller running WLED. The frame is divided in smaller segments, so it can be printed on smaller printers…
In addition to my Multiboard “ Bosch Go Holder ” the Bit Holder. Version 2 also available now. Length reduced to 124mm to be able to mount two holder right next to each other. If you like what I do feel free to buy me a …
A mount for a tape measure or anything that has a belt clip. This works with multiboard . It uses the peg holes. Print in the following orientation with outside brims on. No need for supports.
I'm building out my multiboard and I like the weight bearing snaps as they feel the most secure for my setup, so I put this one together and am pleased with how it turned out Details: Elegoo Neptune 4 Pro 0.6 mm nozzle 15% infill 1.2 mm…
Snaps for screwing tiles directly onto the wall. Prints without support I tried using the (old) original parts, which are designed for mounting tiles directly to a wall, but the screw-in fasteners turn when you fasten the screw, and they…
Do you like the Cable holder ? Then here you have a remix with a few improvements! This remix brings several modifications that improve the original model: Several size options Rounded edges of the model (the original model has sharp…
Gone down the deep end on Multiboard? Me too! Check out my collection of Multiboard Models here! Comments 2024-06-08 Update: I've added a 2nd version that uses Small Threat T-Bolts to attach to the Tile. This May be an alternative if you…
Te used with the www.multiboard.io system A small and strong screwable hook to be used in the Multiboard pegboard holes. The hook is printed sideways to make it very strong. Orientation The orientation of the hook will vary depending on…
Every multiboard needs to have some bins to put stuff in. Need any useable size you can just attach end easily remove, use the multiboard bin system. This is a variant of my normal bins to allow access from the front. Howto use: You will…
Multiboard screwdriver holder/shelf, robust design scaled for maximum volume of ender 3. Shelf is prepared for multiboar system: www.multiboard.io I also added support for more rigidity. V2: 7mm storter for better fit on Ender build…
This is a multiboard compatible hammer hook I designed to use the standard multiboard pegboard click. This should hold any standard hammer. I printed at a 45 degree angle to give all sides a consistent texture with tree supports.
For the Multiboard Storage System. The cutters fit standard filament cutters (Creality) or pointy nose pliers. The wire strippers fit the ones in the picture. It may or may not fit a different brand.
A remix of a scissor holder Multiboard https://www.multiboard.io Print settings: Material PLA+ Layer Height 0.2 Perimeters 4 Infill 15%
I have an insider corner above my workbench where I am putting up a multiboard. I couldn't make any of the premade brackets work for my needs, so I made my own. These are working for me and can be seen in the attached images Updated…
Dual Wire Cutter/Plier Holder for the Multiboard -Added a single cutter/plier option Multiboard https://www.multiboard.io Print settings: Material PLA+ Layer Height 0.2 Perimeters 4 Infill 15% No supports
Pen/Pencil/Tool Cup Holder Multiboard Push-Fit Mount
Plier Holders for Multiboard, prints without support
Multiconnect is a generic system to hang things to your wall or any board (like Multiboard or Honeycomb). Those files here should only be used for modeling, allowing you to create any variation of multiconnect you want. This is version 2…
Multiconnect is a generic system to hang things to your wall or any board (like Multiboard or Honeycomb). Those files here should only be used for modeling, allowing you to create any variation of multiconnect you want. For new models I…
Multiboard https://www.multiboard.io Print settings: Material PLA+ Layer Height 0.2 Perimeters 4 Infill 15%
This set includes the following sizes: Mini hook (25cm) Standard hook ( 50cm diameter) - great for Cricut vinyl rolls, wrapping paper, compost bag rolls, hammers. Grand hook ( 75mm diameter) - I use these for larger vinyl rolls, silicone…
Generic connectors to hang your bins/shelves or anything else to your multiboard. The connector is pretty generic and allows you to attach anything you want. This is the version of multiconnect optimised for usage with Underware and the…
I couldn't find a plain stackable bin that fit the multiboard holes, so I made my own. The bottom is rounded to make for easy scooping I optimized the wall thickness for least material / strongest part They are stackable 3 sizes:…
It fits perfectly on a 8x4 Board or just like me 2x of them on 8x8. It's designed to use the Board connectors @ the edges to increase efficiency of the build. During the time I've collected too many Bits! That's why I've had to do this. I…
This is a remix of "Screw Driver" by megatron321 ( https://www.thingiverse.com/thing:709811 ) 0.2mm quality No supports needed if printed vertically This screw driver has been adapted to drive MULTIBOARD bolts and T-Bolts. After…
Note : In the pictures, the feet are on the top instead of the bottom, I fixed that in the model after realizing that they where feet and not just connecting pegs! Fusion 360 redesign of the Chipp Walters' drawer system design (just the…
Updated with hole for hanging. This tool helps removing Multiboard snap fit inserts. It consists of a medium thread with a handle that can be used to leverage the snap insert out.
There are 3 models with different attachment types for the Multiboard. It can be used for tape measures and safety glasses. The snap need to be printed with supports. There is also now a thicker version for heavier tape measures Credit to…
Every multiboard needs to have some bins to put stuff in. Need any useable size you can just attach end easily remove, use the multiboard bin system. Note: This is version 2 of my multiboard bin system . Differences from the first version…
Simple headphone holder for Multiboard. Needs a large thread screw to mount.
Since the new Flush Snaps are a little flimsy, it can be difficult to push them into their Multiboard counter parts - especially if you chose the tighter versions. So I made this little tool to help with that. Print settings I print these…
The ultimate screwdriver holder for #Multiboard! Holds 12 screwdrivers in the main holders, plus has slotted holes for inserting extra smaller screwdrivers, and a front rail for tweezers, pliers etc. I don't have much horizontal space so…
The Tilable Tilt Box , a practical and compact storage solution designed to attach seamlessly to Multiboard system . This box is perfect for organizing and storing small components, keeping your workspace tidy and efficient. NEW: The new…
A remix of DanPDK Quick-change Paper Towel Wall Mount holder allowing for it to mount to multiboard walls Requires M3x20mm bolts X2 as hinges for the flap
A Voroni AA and AAA battery dispenser modified to mount to Multiboard. You'll need to add a Drop-In Nut Snap and two M4 screws to connect to the board.
Made sides wider, stronger and with angles to easily slide on the tweezers. Also, it prints horizontally and has an easy grab to remove it. To attach to a multiboard, either push it into one of the tile connectors like I did or use one of…
Just printed out and hung my Multiboard. I found this really nice Deburring Tool Holder from Brad @FTBT 3D but it was for the HSW so I made a version like it in OnShape but with a peg that fits the Snap Connector on the Multiboard. I have…
For the Multiboard Storage System. Standard Multiboard printer settings work, no supports needed. https://www.multiboard.io/ Added a holder for 75mm bottles. Added new versions of all the bottle holes with a Bolt Hole for the Large…
A simple allen key holder for multiboard . Sizes: 10, 8, 6, 5, 4, 3, 2.5, 2, 1.5 mm. Comes in two versions: with engraved (debossed) and embossed text Attaches using anti-rotate multiconnect so you can quickly remove it from the…
Click in a scissors holder to your Multiboard wall. Easily pull the holder out to move it to a different location. Works with lots of different sizes or scissors! Requires a Multiboard Snap to click into:…
A remix of the Multiboard Push-Fit Caliper holder to directly use the official multiboard remix snap fitting. I found the push fitting to be too loose for my preferences. By using the snap fitting directly, the caliper holder is solidly…
Just a very simple shelve with a size of 6x3 of the multiboard grid (15cm x 7,5cm). How to use: You will need at least one multiboard connector for each edge of the shelve, but may use as many as you like. Connect those to the multiboard,…
Multiboard and Honeycomb Storage Wall holder for tape measures with a belt clip. Print upright without supports. Updates 23 Apr 2023: Added version B with unneeded material removed. Just choose whichever looks better to you. 03 May 2025:…
With the build of my first Multiboard I was tired of "Draw - Deinstall - Drill - Install - Screw - Draw - Deinstall - Drill - Install - Screw - Draw - Deinstall - Drill - Install - Screw - Draw - Deinstall - Drill ..." And the holes 90%…
Want tape holders that are easier to print and stay put? These use the t-bolt multiboard screws as a base and extend them out 75mm or 100mm to hold rolls of tape. They're nicely secure and don 't droop.
Die Halterung für M12 Akkus von Milwaukee ist für die Nutzung mit dem Multiconnect System von @DavidD für Multiboard gedacht. Es gibt ein Modell für die kleinen und eines für die größeren Akkus. Beide Modelle sind so ausgelegt das sie…
Remix of the 9mm small thread flathead t-bolt for Multiboard to allow for knub which can hold a ruler with a hole. https://www.multiboard.io PLA+ 0.2 Layer Height 3 walls 15% infill
New: I made a new version of all 12 shelves with a back with Bolt Holes for the Large Multiboard Bolts. I use the 9mm Flat Head . You can use longer if you have your tiles spaced from the wall. These will hold a lot more weight then the…
Slicer settings and other info: 0.4mm nozzle 0.2 layer height PLA Supports enabled (tree supports) 15% gyroid infill Holes centers are placed 30mm apart for the big mount, and 25mm apart for the medium sized one. All files are available…
Not even finished the printing of my first Multiboard, but already made a first holder … Don't wanted to print bins I already have ... So I made this holder for this bins (Amazon Germany): https://amzn.eu/d/iyvn6eo More infos about the…
Tried most Gridfinity Multiboard shelves and was unhappy. Either poor fitting, too much material required or lack of magnet support. Found the Gridfinity Refined models perfect and decided to remix them with pegboard clicks, so no bolts…
If you like my work, tinkering and messing around with stuff. Then please consider supporting, it would be greatly appreciated! I'll be looking forward to interact with you guys and our shared passion for making! :)…
Overview A parametric re-imaging of Horacio 's excellent HSW Cutter Holder which allows you to fully customize the inner dimensions (height/width/depth) of the holder, choose the variant style and the number of slots, and pick the…
This is small quick model needed for myself. First intension was to print a ready model, but as it happens, best one I liked a little bit didn't met my taste. The models (which was already a remix) author made it with attached Multiboard…
This simple bin can easily be attached to your multiboard using the multiconnect connector system . I would recommend to at least use 4 connectors, one for each edge. Note the bin is using an optimised “quick change” version of the…
A simple addition for Multiboard to store your small pliers. I use mine “upside down”. This gives the best friction to the pliers so they stay in place. I printed mine with PETG, 0.4mm nozzle and 0.2mm layer height.
This is a caliper mount that is easy to print and attaches to a Multiboard pegboard/small hole using a T-Bolt.
Remix of the modal to fit the multiboard plates properly. PS: The hooks are designed to be fit tad bit loose
Setting up my Multiboard I was not able to find any toolholders that fit for the tools I want to use it for, but I found a very good gridfinity shelf made by user David D here on Printables that had a nice and stable way of hanging on to…
Overview A complete print in place paper towel holder for the Multiboard system. It will require four snaps . Push-Fit, Bolt-Lock and Pegboard Click options available. It's a good idea to have access to the back of your board if you use…
Designed to allow quick and easy storage solutions for use with the Multiboard system with the following design objectives: Parametric Box or cylindrincal Honeycomb pattern to match multiboard asthetic Use two peg board holes for…
Slicer settings and other info: PLA 0.4mm nozzle 0.2 layer height 15% gyroid infill Supports enabled Brim highly recommended Inner dimensions (W x L x H): Small slot: ~36x73x100 Big slot : ~46x86x100 XL slot: ~54x92x100 The light blue big…
Can't find a good compact set of holders and bins that can be securely mounted to my multiboard ( https://www.multiboard.io ), so I created my own version with a special universal fixation bolt (a modified version of the multiconnect bolt…
Simple cable tie holder to use with Multiboard
This space saving battery dispenser for the multiboard is designed to hold both AA and AAA batteries, 12 AA and 13 AAA. A pattern on the sides of the magazine makes it easy to see how many batteries are left. A drawback of this design is…
The original design is for Honeycomb Storage Wall and there is an adapter ( https://thangs.com/designer/Keep%20Making/3d-model/Honeycomb%20to%20Multiboard%20Snap-974237 ) that fit to the holder, but the spacing of the Honeycomb is…
This is a Multiboard hanger for the Vise Grip automatic wire strippers, inspired by “HSW Vise Grip Wire Stripper Hanger” from Tom Nardi.
V1 - untested - 2x3 and 1x2 Gridfinity Baseplates adapted to Multiboard system - untested - tested: 2x4 Printed in clear resin it fit too loosely into the Multiboard octagon tile, but with a bit of glue it now holds a 600g bluetooth…
Remix of the Filament Cutter Holder or Needle Nose Pliers to work with the Multiboard system. Layer: 0.20mm Infill: 15% Support: None Bed Adhesion: None or Skirt Speed: 180mm/s Wall Line Count: 3
A custom made paint bottle holder for the Multiboard system. It is designed to be mounted using two small T-bolts and has a capacity of 24 dropper-style bottles up to 25mm in diameter like those from Vallejo, Army Painter, and other hobby…
Add multiboard compatible snaps to your openGrid board. This could be either: Adding a fill multiboard snap - Yes multiboard does fit into openGrid Adding the mid screw/push fit snap Adding the small screw snap Disclaimer: The grid size…
This is a small driver that helps you screw in those pesky T-bolts! Designed for the shorter heads, but will work with the longer ones.
Your standard paper towel holder that you can mount vertically on your favorite vertical storage system – Multiboard or Honeycomb I specifically used Multiboard, but with MultiConnect system, these can be mounted on the storage system of…
At the time I am posting these, Multiboard only has brackets up to 2x2. I wanted something larger so I came up with these. They attach using the large Multiboard bolts. Use the 9mm Flat Head if you are putting the Multigrid Base Plate on…
This is a complete Metric Hex Key Set Holder designed for Multiboard using the SlideCleat for Multiboard Connector . For installation you'll need to thread two SlideCleat Connectors into your multiboard tiles and simply slide this Hex Key…
Fits into Multiboard: https://www.multiboard.io A Remix of Skadis Keyboard Holder by detritus https://www.printables.com/model/589520-skadis-keyboard-holder No support needed, should fit most keyboards. Multiboard snaps are needed for the…
8x8 Multiboard Tiles because the Multiboard.IO library is a pain to navigate. Credit to Multiboard.IO for the model
Simple Hammer Hook. Which in my case I use to Hang a Zoom H1 Recorder. I only found one for the Multiboard that uses the Peg Board Pins which made it very hard to print. This model is secured to the Multiboard with a Big Thread Bold. NEW:…
Warning: Those shelves are not meant for gridfinity. If you are looking for those, please click here . Also note that multiboard did change their bin design after I created those bins….so maybe use the official solution instead. About:…
All credit to Sof and previous models. This simply replaces the push fits he used with the official ones from Keep Making for a tighter fit.
Sturdy hook to hang small or large items. It comes in 3 sizes.
Screwdriver holder for HSW (Honeycomb Storage Wall). Remixed to use the small hexagon inserts, which are easier to remove/relocate. Thanks to @CarbonProp_540499 for the excellent original design. Allows you to easily pull out/insert the…
![[Multiboard] Hanger Hook](https://media.printables.com/media/prints/877774/images/6731896_fb42f20c-93bf-47ed-8ccd-f7125d777ded_5811d27e-fbfc-4b33-815a-0d83b199975c/pxl_20240512_210115842.jpg)
