317 modeli
Important announcement: I released version 2 of the multiconnect system for multiboard . This version is fully compatible , but also incorporates some handling and versatility improvements. I recommend to always print the new versions.…
Generic connectors to hang your bins/shelves or anything else to your multiboard, now in version 2. The connector is pretty generic and allows you to attach anything you want. Note: There also is a flush version of multiconnect for…
Multiconnect is a generic system to hang things to your wall or any board (like Multiboard or Honeycomb). Those files here should only be used for modeling, allowing you to create any variation of multiconnect you want. This is version 2…
Multiconnect is a generic system to hang things to your wall or any board (like Multiboard or Honeycomb). Those files here should only be used for modeling, allowing you to create any variation of multiconnect you want. For new models I…
Generic connectors to hang your bins/shelves or anything else to your multiboard. The connector is pretty generic and allows you to attach anything you want. This is the version of multiconnect optimised for usage with Underware and the…
Note : In the pictures, the feet are on the top instead of the bottom, I fixed that in the model after realizing that they where feet and not just connecting pegs! Fusion 360 redesign of the Chipp Walters' drawer system design (just the…
Generic connectors to hang your bins/shelves or anything else to your honeycomb storage wall. The connector is pretty generic and allows you to attach anything you want. Why use this connector: The connector is universally usable and…
Your standard paper towel holder that you can mount vertically on your favorite vertical storage system – Multiboard or Honeycomb I specifically used Multiboard, but with MultiConnect system, these can be mounted on the storage system of…
Born out of necessity, I present to you all the Anti-Tilt MultiConnect! Snap it into your Multiboard (square side down) and enjoy attaching small MultiConnect parts without needing two MultiConnectors to keep the item from rotating! 20%…
This improved Multiconnect Snap is easy to print, holds a firm grip on, and is easy to remove when you want to.
I loved these drawers, but I thought, What's the biggest I could make it and still fit on a 256x256x256 build plate? Turns out it is a 5x5 Gridfinity and 5 drawers high. Note the drawers are 5u Gridfinity bin tall. I've also included the…
Just a remix for openGrid full + lite snaps with multiconnect. Revised version with the v2 directional snaps. Check out my snaps with multiconnect - no rotation: Multiconnect singlepiece snaps for openGrid - no rotation If you don't know…
Universal mount for game controllers. This design utilizes MultiConnect connectors to mount on the Multiboard system.
Introduction I wanted a way to add drawers to Multiboard. Initially, I adapted the 5x3 shelf unit by David D , but then I figured, why not build his Multiconnect mount system into the drawer chest unit? Mounting to Multiboard The…
Since multiboard has released multipoint there are now two different, but very similar systems: Multiconnect and multipoint. As multiconnect was released several months earlier (beginning of 2024 compared to August) there are many models…
Uses MultiConnect to mount on you multiboard.
These very simple holders use far less space (1 Multiboard ‘unit’ / 2.5cm wide) than other plier holders that mount the pliers flat on the wall. They will work for most normal sized pliers. 2 versions attached: 15.5mm - ‘normal’ pliers…
Mount for a Milwaukee tools M12/M18 charger. The file needs supports (I used organic which came out fine) and should be printed in the supplied orientation (as it would hang).
This is half of a cable spool, I use it for underware cable management on larger and heavier cables. I noticed that the hook in the main model was only available for 25mm multiboard, so I recreated and adapted. It's made in openscad so It…
Hand Tool Holder for the Multiboard MultiConnect system, requires 2 https://www.printables.com/model/716558 connectors Different sizes available
Multiboard holder for the Irwin Quick-Grip 150mm(6")-610(24")mm Medium Duty clamps. The Heavy Duty clamps are thicker (wider) so don't fit. This holder uses Multiconnect connectors. 4 of them is sufficient. Multiconnect is much stronger…
Simple Hammer Hook, Hammer Holder for Opengrid. Comes in Snap and Multiconnect versions
Use multiconnect to attach your multiboard to your wall or even another multiboard. This allows for easy removal of that multiboard, like what you would have using french cleat - but with a way tighter hold on your board. Also stacking…
Canister Holder for the Multiboard MultiConnect system, requires 2 https://www.printables.com/model/716558 connectors Different sizes available
Want some extra strength when using multiconnect on your multiboard? Use the multiconnect rails to connect multiple connector heads using a rail. This rail will increase the area the parts are touching and by doing so increase the…
These are single-piece directional Multiconnect snaps for openGrid that allows for increased weight compared to the non-directional version. This is a remix of origin415 's openGrid full/lite Multiconnect Multiboard Adapter but…
A generic peg connector for Multiboard that you can use to hang various accessories/bins or anything else you'd like. Similar to DavidD's Multiconnect - Generic Connector . I loved his idea, but wanted a peg version that i could use on…
Support: No Wall Loops: 3 Filament: PLA+
Holder for a kitchen roll using MultiBoard and MultiConnect for support. The default is for 40mm rolls, which I think are standard in the UK I printed in PLA with 0.2 mm layer height, 15% infill and 3 perimeters. Make sure to have support…
Remix of @LoboCNC's excellent Broom (or other tools) holder. I added Multiconnect slots to the back so it connects to Multiboard . @LoboCNC: “This easy-to-print broom holder uses a rolling gear and the broom's own weight to securely clamp…
Note that David has already designed folding versions of the new v2 multiboard bolts, which fasten using a coin, here: https://www.printables.com/model/1074671-multiconnect-generic-connector-for-multiboard-v2 Keeping this up for folks who…
Small and Large Mallet holder for Multiboard. The small holder fits mallets with a diameter up to 65mm and a handle up to 35mm wide. The large holder fits mallets with a diameter up to 78mm and a handle up to 30mm wide. Is your mallet a…
Use multiconnect to hang anything to your wall. Those connectors can just be screwed to the wall using normal screws. Why use this connector: The connector is universally usable and allows for fast and easy installation and removal of…
Print this to quickly mount your Ryobi battery to your Multiboard. This works with any Multiboard to Multiconnect connection points. Find my favorite ones here .
To be mounted with MultiConnect
UPDATED! - I have added Reversible ones so the handle can now be to the left or right Keep your filament organized with this modular spool holder designed for OpenGrid and multiboard systems! Perfect for workshop organization and easy…
MultiConnect slots for up to 3 Prusa 250mm build plates to openGrid. This may work for other printer bed sizes as well, but is specifically designed for 250mm wide. I used this with the openGrid Core One Side Panel . Print List 1x…
Remix of the Bike helmet hook by ByteSlinger to hang bicycle helmets on a Multiboard or a Honeycomb (HSW). You need two MultiConnect connectors, e.g. Multiconnect - Board connectors_Multiboard big, laying down , one vertically below the…
A caliper holder for Multiboard but with a multiconnect backing.
Multiboard holder for a Carpenter's / Mitre square (universal). This holder uses Multiconnect connectors. 2 of them is sufficient. Multiconnect is much stronger than Multipoint. The connectors are tool-less and very easy to move. The…
This is to mount a JBL Charge 5 (and possibly other JBLs) to your Multiboard wall. You need to print 2x Brackets & 4x Multiconnect Big Thread Connectors. It uses the Multiconnect system and requires the Big Thread Connector found here:…
Description A simple, stackable container for storing items for the multiboard system. It is attached to the multiboard with (at least) 3 Multiconnect attachment points and can be easily removed. The container can be divided into two…
This contains three pieces: 1) The mount, which needs 3x 10mmx5mm neodymium magnets you can get off of amazon easily and fits perfectly on the inside corner of your Prusa Connect. It exposes a single OpenGrid tile mount, so you can snap…
Bottle holder for the Multiboard using the Multiconnect system. Various sizes includes but the model is online with Onshape and is parametric. Use the URL and change the variable ‘size’ to whatever value you like. The fillets may need…
I printed in pla 0.3 layers i removed infill from the “front” of the “wings” so it'll be more “snappy” required atleast 1 multiconnect connector (2 recommended)
Adaptor plate for hanging Harbor Freight storage bins on Multiboard.
The openGrid models included Multiconnect snaps with a threaded snap and a screw-in multiconnect connector. While the 2 part assembly allows using a folded screw that can be printed in a stronger orientation*, that isn't always necessary,…
Simply import into your slicer as negative space and add to the rear, vertical side of your STL. (Narrow side out, of course.) Labeled as [columns]x[rows] The EZ versions have keyways to be able to mount without sliding the entire length…
Remix of Multiboard gridfinify shelves von David D | Kostenloses STL-Modell herunterladen | Printables.com to use it on honeycomb storage wall system.
If you want a single part to hold all your different screwdrivers, this is for you! This part can hold screwdrivers with a diameter from 1mm up to 8mm or more. It also works for files. To put your tool onto the wall, just use your tool to…
A wire cutter holder that interfaces with the MultiConnect system, for sturdy connections with the different vertical storage systems. I was mostly satisfied with Single/Dual Wire Cutter/Plier Holder for the Multiboard , but it kinda…
Universal mount for your game controller. Attach to multiboard using multiconnect, also download and print two multiconnect connector . Multipoint compatibility: If you want to use this model with multipoint you may use the multipoint to…
This is a remix to @davidd's excellent multiconnect system. This large thread connector connects to the Multiboard system firmly while allowing you to quickly add and remove multiconnect-compatible mounts. When threaded fully and into a…
I didn't like too much the way the original tool hanger attached to the multiboard so I decided to remix it using the multiconnect system It is really sturdy now and easier to move around the boards in my house.
This is a parametric implementation of the multiconnect “connector back” negative, i.e. it's a customizable model of the female channel on the back of multiconnect-mounted designs. The negative is used by boolean subtracting it from the…
Multiboard holder for the Bessey LM20 series clamps. This holder uses Multiconnect connectors. 3 of them is sufficient. Multiconnect is much stronger than Multipoint. The connectors are tool-less and very easy to move. The model locks the…
For use with the MultiConnect Connector for existing Multiboard accessories Designed specifically so I can use the amazing MultiConnect Connector with my existing bins They come with small thread holes specific to Multiboard and mount…
If you need to use single multiconnect to mount something, this prevents it from rotating and also makes the connection more tight and secure overall. Check the original for more information. I just made these because I like to use single…
Simple Multiconnect Tapemeasure Holder
Overview This is an OpenSCAD version of Phoenix Knight Design's original 6 spool holder . The original design would not work for me due to my spools being significantly smaller than the ones in the original design. Features Using…
WARNING: I have not used these in a real-world setup yet, but because I think it will be at least a few weeks before I get around to that I wanted to share them now. PLEASE do a test print and see if this works for you before printing in…
Another Ryobi 18V battery holder for the Multiboard system. This holder uses Multiconnect connectors. 2 of them is sufficient. Multiconnect is much stronger than Multipoint. The connectors are tool-less and very easy to move. The model…
Multiboard holder for the Ryobi USB Lithium screwdriver and two extra bits. Works when the tool is in straight or pistol ‘mode’. This holder uses Multiconnect connectors. 3 of them is sufficient. Multiconnect is much stronger than…
This parameterizable OpenSCAD design allows you to print out brackets to attach anything in the wonderful Multiconnect ecosystem onto 2020 profile T-slot aluminum extrusion rails. I currently support two different variations of the 2020…
Multiboard Post-it Holder that connects to your board using MultiConnect. These connections are the best in my opinion. They hold very tight and are easy take on and off. Get your connectors here → MultiConnect Credit to David D for…
This is a wall-mount block with holes to hold a variety of different sized pens, pencils, or similar. It is attached to the wall via a single column of multiconnect peg(s), each. These pegs can attach to many different wall board…
Generic connectors to hang your bins/shelves or anything else to your Skadis wall. The connector is pretty generic and allows you to attach anything you want. Why use this connector: The connector is universally usable and allows for fast…
V1: using normal peg. I haven't print it and tested it but it should work. V2: using 2 MultiConnect Peg printsetting: infill 10%, parameter 3 and v1 needs tree support
Printed with strength settings using PLA, the "Thick Boy" is probably overkill, as the thinner one is definitely strong enough to support the weight of the circular saw. The length of the gap for the hook is around 133.5mm, so as long as…
I was missing mounting options for my Makita DC18RC charger using openGrid . So, I took inspiration from existing wall mounts and designed these brackets, which work with openGrid using Multiconnect. This mount uses 7x5 openGrid tiles and…
Thanks https://www.printables.com/@DanielRyan for a great design, this is a copy with modifications for multiconnect. Not sure how to upload multicolor prints to Printables, but step should contain both logo and stand. Spacing for…
This Multiconnect snap is a remix based on the openGrid lock snap from openGrid by David D . It was made by combining a multiconnect connector with the (beta) lock snap. In my testing, I found that the one of these lock snaps can hold…
Remix of ntressler7's Dewalt battery holder, replacing the screw mount by multiconnects. Printed on a Voron 2.4 in PLA. 0.2mm layer thickness on a 0.4mm nozzle with tree supports for the muticonnect snap pyramid
AEG (BS 12 C2 and BSS 12C) / Ridgid(?) / 12V Drill holder for Multiboard . This holder uses Multiconnect connectors. 3 or 4 is sufficient. Multiconnect is much stronger than Multipoint. The connectors are tool-less and very easy to move.…
Multiboard holder for the Ryobi USB Lithium batteries. This holder uses Multiconnect connectors. 2 of them is sufficient. Multiconnect is much stronger than Multipoint. The connectors are tool-less and very easy to move. The model locks…
The openGrid models included Multiconnect snaps with a threaded snap and a screw-in multiconnect connector. I made these simple snaps have the multiconnect connector as part of the snap. There are 2 different snaps, one using the standard…
MultiConnect trays with radiused bottom corners to make grabbing small objects easier, couldn't find one like it already. Printed in Grass Green Voxelab PETG-CF, 0.2mm height, 3 walls, 5% gyroid. I love this filament btw.
These are an alternate version of my openGrid Multiconnect Snaps , using a non-rotating multiconnect instead of the standard round connector. The openGrid models included Multiconnect snaps with a threaded snap and a screw-in multiconnect…
I needed to make the hubs a bit wider to fit standard rolls in the US. I modified the FreeCAD drawing available at https://www.printables.com/model/50308-kitchen-roll-holder This also uses Multiconnect -…
Simple Spool holder for Multiboard with Multiconnect Hold a single spool of 1Kg using a 3x3 space of the Multiboard. It was modeled based on the Elegoo Cardboard spools so hold chunky and skinnier ones. A small amount of support is needed…
Multiboard holder for the Ryobi USB Lithium battery charger. You will need 2 M4 8-10mm machine screws for the pre-made holdes. This holder uses Multiconnect connectors. 3 of them is sufficient. Multiconnect is much stronger than…
Uses connectors from https://www.printables.com/model/716558-multiconnect-generic-connector-for-multiboard
An adapter to use Multiconnect accessories for Multiboard or OpenGrid on a Cheap Wireframe. Print as in the screenshot. More details here:
These are an alternate version of my openGrid Lite Multiconnect Snaps , using a non-rotating multiconnect instead of the standard round connector. The openGrid models included Multiconnect snaps with a threaded snap and a screw-in…
I found the original project very useful but I wanted to use the multiconnect system to connect it to my multiboard I have made only smaller version, If need the larger version ask me Slicer settings and other info: PLA 0.4mm nozzle 0.2…
Tool holder that grabs the tool from the battery slot. Designed to hold the drywall router and flashlight, should be compatible with more 20V Dewalt tools. Printed on a Voron 2.4 in PLA. 0.2mm layer thickness on a 0.4mm nozzle with no…
A small rack designed to hold the double open ended set (8 piece) of ~3mm thick LAOA Spanners/Wrenchs ( https://vi.aliexpress.com/item/1005007507050465.html ). The Small Rack is 3 Opengrids tall (84mm's), the Tall Rack is 4 Open Grids…
This model is a wall mount for the excellent XTAR VC4 Plus battery charger, designed for Multiboard and Multiconnect . It likely will also fit the XTAR VC4SL , XTAR VC4 and XTAR VC4H which appear to have the same enclosure but I don't own…
MULTICONNECT SCREW for Elegant Screwiverse Insert
If you use the Multiboard system and have a Hakko Soldering Iron, this is a must have. Hang your Hakko on your Multiboard using the Multiconnect system…
Claw Hammer holder for Multiboard. This holder uses Multiconnect connectors. Attached model has no embossed text. Works for any generic claw hammer from 16 to 20 oz This holder uses Multiconnect connectors. 2 of them is sufficient.…
Multiboard holder for the Ryobi USB 18V Fast Charger. Premade holes for the mounting screws are 63mm apart - see back of charger. This holder uses Multiconnect connectors. You will need 2 M4 8-10mm machine screws - they self tap into the…
Modified GUZ_Prints Hex bit holder to use multiconnect to connect to my multiboard. It loses the feature of interconnecting multiple sections nicely, but I found the size to be more than sufficient for all my bits with just one. Printed…
remixed to be screw mounted rather than press fit. print 2x of the screw in things.
Multiboard / MultiConnect compatible holders for the Niimbot D11 label maker. There are options for the old version as well as the newer model. Port holes on the bottom to plug 'em in. Credits to Jonathan ( KeepMaking ) for creating…
Multiboard holder for the Ryobi USB Lithium Glue Pen and its stand. This holder uses Multiconnect connectors. 2 of them is sufficient. Multiconnect is much stronger than Multipoint. The connectors are tool-less and very easy to move. The…
MultiConnect mounting connector for OpenGrid Lite panels. Allows for easy and reversible removal of the panels and unlocks more potential options for mounting panels to your walls. Specifically designed for mounting panels in tight spaces…
A big hook to be used with the multiconnect pieces on wall mounted systems such as multiboard. The hooks are mounted on two connectors to prevent rotation. Two hooks can be mounted side-by-side or spaced apart. The size of the hook was…
I remixed HandsOnKatie's smallest hook to carry small things like keychains and other stuff with small holes. This hook is 8mm wide (with 25mm wide multiconnect back). Additionally I removed the side overhangs to place hooks directly side…
I'm not very experienced at 3d modeling, so I ended up doing this in PrusaSlicer using various commands (cut, merge, resize, etc.) and it shows. But it is structurally sound and works relatively well. YMMV. License is CC…
