Liczymy pasujące modele…
Design reference rules, it is specially useful while modeling and taking measurements of real world objects. They are designed to fit inside Digital Calipers Case. You might also like these:…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Wydruk około 0,73 €–0,89 € nettoWstępna wycena jednego wariantu
Triple gear helix spinner Complette spiners collection : https://www.printables.com/@ThorinOakenshield/collections/388544 I made a remix of the favorite double gear spinner https://www.printables.com/cs/model/345965-gear-spinner In the…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
TIP! Use lube in the bearing for optimal spinning :) NEW VERSION: https://www.printables.com/model/1345804-keychain-spinner
Wydruk około 0,38 €–0,47 € nettoWstępna wycena jednego wariantu
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Wydruk około 1,26 €–1,54 € nettoWstępna wycena jednego wariantu
I would like to introduce to you the 5th version of my wind-up boat. After the 4th version i got a lot of feedack on Facebook, which I have implemented as well as possible. As you can see there is a much larger wind-up weel. The boat can…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena jednego wariantu
Another in the series of rotating gear toys. Now I have twisted the helix of the gear 4 times. The width of the spinner is 70mm and the height is 18mm. It is printed Print-in-place. Nozzle 0.4 mm, layer height 0.2 mm Many other spinners…
Wydruk około 2,77 €–3,39 € nettoWstępna wycena jednego wariantu
I DM for a group of players new to TTRPGs and saw that they tend to need help finding the right die to roll or end up using the wrong ones for their actions. My goal for this case was to reinforce the differences between the dice and to…
Wydruk około 5,45 €–6,66 € nettoWstępna wycena jednego wariantu
TIP! Use lube in the bearing for optimal spinning :)
Wydruk około 0,43 €–0,53 € nettoWstępna wycena jednego wariantu
Millennium Falcon Scale 1:500
Wydruk około 3,20 €–3,91 € nettoWstępna wycena jednego wariantu
TIP! Use lube in the bearing for optimal spinning :)
Wydruk około 0,29 €–0,36 € nettoWstępna wycena jednego wariantu
This is the first of four Cartoon-Style Christmas Candles, that you can use for your christmas decorations! NEW: I have added new Variants, including A Smaller Version, and Support vor Electric Tealight Candles. Here are the Models which…
Wydruk około 5,02 €–6,13 € nettoWstępna wycena jednego wariantu
Please check your roll size before printing. My roll diameter is about 10.6 cm. If this is to small you can rescale the model in the slicer program I recommend to set supports just under the free arms (use support-blocker at other parts)…
Wydruk około 6,66 €–8,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Are you new to Black Crow Prints? All the STL files are here free on Printables.com. A non printed parts list is below along with easy step by step assembly videos. Help is available, usually within 24hrs. You can contact me thru private…
Wydruk około 9,59 €–11,72 € nettoWstępna wycena jednego wariantu
Use random seam position + classic wall generator. A simple wearable fidget ring that works as a spinner, allowing the outer ring to rotate smoothly around your finger. Designed as a compact and discreet fidget toy for everyday use,…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
Print: I printed with PETG with 0.3mm and variable layer height (because of thread). A brim is recommended. Food safety: at own risk. Depending filament and print. Please let me know your experience. 2024.5.06: version without air…
Wydruk około 1,82 €–2,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Nested hearts print in place with no supports for a rotating fidget toy or hanging decoration. Choose with or without a loop for hanging. You can also pop the hearts out and replace them with different colors, by squeezing the outer heart…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
Die 3D-gedruckte Abfalltonne im Maßstab 1:6 für ein Puppenhaus ist ein beeindruckendes Miniaturmodell. Dieser Bausatz enthält eine detaillierte Tonne mit folgenden Merkmalen: Öffnender Deckel: Die Abfalltonne verfügt über einen…
Wydruk około 10,26 €–12,54 € nettoWstępna wycena jednego wariantu
(Description in german below // Deutschsprachige Beschreibung folgt unten) Inspired by the design "Funnel and bottle base for Elegoo resin by antcam" (on Thingiverse) I designed a new, slightly modified version. Main difference is the…
Wydruk około 5,20 €–6,36 € nettoWstępna wycena jednego wariantu
This is the third of four Cartoon-Style Christmas Candles, that you can use for your christmas decorations! I Hope you like "Grumpy, the Candle" :-) NEW: I have added new Variants, including A Smaller Version, and Support vor Electric…
Wydruk około 4,97 €–6,07 € nettoWstępna wycena jednego wariantu
This is the second of four Cartoon-Style Christmas Candles, that you can use for your christmas decorations! NEW: I have added new Variants, including A Smaller Version, and Support vor Electric Tealight Candles. Here are the Models which…
Wydruk około 5,02 €–6,13 € nettoWstępna wycena jednego wariantu
360° Spinning Adapter for the Multifunction Arm Mounting System What you need Multifunction Arm mounting system (Small Arm System) Big Clamp For Small Arms This Spinning Adapter Side small-NUT-M3.stl (1x) screw-small.stl (1x) Hardware…
Wydruk około 1,28 €–1,56 € nettoWstępna wycena jednego wariantu
When looking for Diyable easter decoration i didn't find anything, which i liked. I could only find an image of something similar to this. As there wasnt any Instructions or files, I just made something similar and this is the result. i…
Wydruk około 1,05 €–1,28 € nettoWstępna wycena jednego wariantu
Finally, here is the fourth Cartoon-Style Christmas Candles, that you can use for your christmas decorations! Now the Set is complete :-) NEW: I have added new Variants, including A Smaller Version, and Support vor Electric Tealight…
Wydruk około 5,02 €–6,13 € nettoWstępna wycena jednego wariantu
MODEL DETAILS Modular, customisable nozzle holders for RapidChange Revo nozzles. Mounting options for different printers can be found on our Printables profile. Size Information: Each Revo Nozzle is engraved with its size. It can be found…
Wydruk około 0,75 €–0,92 € nettoWstępna wycena jednego wariantu
You can show off your love for Peeps and add some Easter flair to your hoodie drawstrings! They make a perfect gift for your co-workers! Print a pair in every color! Print one pair in 30 minutes and uses under 5 grams of filament! They…
Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu
Printed with 0.2mm layer height.
Wydruk około 0,37 €–0,46 € nettoWstępna wycena jednego wariantu
Osteranhänger für den Osterstrauß weitere Modelle: Küken im Osterglockennest Osterhase mit Pinsel Osterhase mit Eiern Ei mit Tulpen Osterhase mit Schmetterling Osterei mit Maiglöckchen Küken und Maiglöckchen Osterhasen unterm Baum Osterei…
Wydruk około 0,25 €–0,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Round version of the eye is added Project file added G-code file added
Wydruk około 8,89 €–10,87 € nettoWstępna wycena jednego wariantu
Two fingers gear fidget spinner I prepared three sizes of fidget cages, with a hole of 18, 19, 20 mm. I have big fingers, a hole of 20 mm fits me. There are also corresponding rings for the cages After inserting the gears, glue the rings…
Wydruk około 0,80 €–0,98 € nettoWstępna wycena jednego wariantu
No pleasure for unrolled tension belt straps? With this simple but equally effective clip, this is a thing of the past! Simply attach to the rolled webbing and the clip holds the roll securely and reliably together. Suitable for all…
Wydruk około 0,65 €–0,79 € nettoWstępna wycena jednego wariantu
Suitable for color printing Outer diameter 10mm The inner diameter of the dot is 6mm Height 2mm Layer height 0.2mm Magnet with a diameter of 6 mm and a height of 1 mm (magnet holds without glue)…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Recommended material PLA Print settings Layer height = 0.2 For PET reflective film markers ϕ=10mm (6mm dot) https://www.aliexpress.com/item/1005007012274939.html?spm=a2g0o.order_list.order_list_main.5.68971802SpDi3O
Wydruk około 1,51 €–1,85 € nettoWstępna wycena jednego wariantu
Insert 10mm is for an 10mm drill chuck Insert 13mm for an 13mm drill chuck I recommend petg because it has very good layer adhesion. 3-4 perimeters should be enough. I took 20% infill and it works well. V2 now available the only change is…
Wydruk około 1,07 €–1,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
MODEL DETAILS This is a print-in-place, torture test for your 3D Printer, that works as a fidget toy. If you liked this model, why not try out our other stress tests too? You can find out all about Revo Hemera XS here! RECOMMENDED PRINT…
Wydruk około 3,14 €–3,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model was made for those of you who do not want to buy those expensive wall panels. I decided to model these for a similar look and ease of use/installation. Measurements/Requirements: I modeled this to fit the Ender 3 3d printer.…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
Part of my series of enclosures designed for Shelly smart devices and Wago 221 connectors. Shelly box for T&E 3x slots and wago 221 connectors Shelly box for inline flex wire and Wago 221 connectors (this one) Shelly box for 2x flex wires…
Wydruk około 3,55 €–4,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Small tractor with freely rotating wheels printed in just one piece. It is printed in the "on the side" position so no need to add supports. For a functional print, you need to have the first layer and flow properly calibrated (to prevent…
Wydruk około 0,93 €–1,14 € nettoWstępna wycena jednego wariantu
5 in 1 Fidget Toy Multi fidget toy with a nice small size which fits nicely in the hand. For fully use the toy, you will need the 608 bearing , which just needs to be pressed in prepared case. Assembling First you press the bearing into…
Wydruk około 0,09 €–0,12 € nettoWstępna wycena jednego wariantu
No pleasure for unrolled tension belt straps? With this simple but equally effective clip, this is a thing of the past! Simply attach to the rolled webbing and the clip holds the roll securely and reliably together. Suitable for all…
Wydruk około 2,49 €–3,04 € nettoWstępna wycena jednego wariantu
This model is free and took a lot of work to create. If you appreciate this model, please leave a download and a like! If you print this model, please post a make. About this model Keep your glasses safe. Guard them with a T-Rex! The neck…
Wydruk około 17,32 €–21,16 € nettoWstępna wycena jednego wariantu
I recommend printing in PLA. Attached .3mf contains 60x105mm tray. Default value for spacer height is 0.4mm so if u slice with 0.15 u probably would get 0.45 height. If u need any other dimension feel free to ask or edit in 360 fusion.
Wydruk około 1,26 €–1,54 € nettoWstępna wycena jednego wariantu
A funnel that attaches to a bottle for a clean easy pour
Wydruk około 1,72 €–2,11 € nettoWstępna wycena jednego wariantu
Bring Kenny McCormick from South Park to life with your 3D printer! Besides the one-piece model, I've attached STLs of Kenny cut into two pieces, which can be printed without supports. If you print Kenny in one piece some supports are…
Wydruk około 6,20 €–7,57 € nettoWstępna wycena jednego wariantu
Basic track connector for hot wheels track
Wydruk około 0,46 €–0,56 € nettoWstępna wycena jednego wariantu
What? A holder to align a small plastic funnel with the body of a 15ml dropper bottle for paint transfer. Used to help transferring paints, as in this tutorial from FauxHammer Why? Because: You want to transfer your Games Workshop paints…
Wydruk około 2,50 €–3,06 € nettoWstępna wycena jednego wariantu
This is a print in place fidget with flexible legs. Do not print with supports. Here is the link to the License that I remixed. The Person that I remixed this from is Dr. Lex .
Wydruk około 2,21 €–2,70 € nettoWstępna wycena jednego wariantu
Use these connectors along with plywood, MDF or other panel products to make modular, customizable and re-configurable furniture. You can make tables, shelves, foot stools, computer monitor stands or other organizers. These are great for…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
This print allows the use of a Bowden tube direct to the extruder when printing hygroscopic filaments. The top is threaded to accept a PC4 M10 fitting (which is actually a 1/8 BSP thread). This fitting has a larger hole inside, so it…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Fell free to comment for improvements if you run on any issues when printing. I printed with Petg white, but I bet you will have some insane filament that looks cool.
Wydruk około 2,61 €–3,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Sometimes you will lose or break a connector in your window blind chain. This simple project will fix it so you can enjoy a working blind chain again. It is designed for chains made of balls with diameter of 3,0-3,5mm.
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
Źródło oznaczyło ten model jako treść 18+.
Wydruk około 2,64 €–3,23 € nettoWstępna wycena jednego wariantu
I discovered the amazing Print-In-Place Working Cannon model from Makkuro . It's amusing and very well designed toy. I decided to add another projectile variant to this model. The default projectile is a simple sphere, so I created…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
from lack of a turn table with right proportions for 3d scanning i tried most of the designs but did not find them adequate for my needs. i wanted smooth movement right height for turning by hand stable not slipping on table first, i…
Wydruk około 1,59 €–1,94 € nettoWstępna wycena jednego wariantu
🐾 Abstract Minimal Animals – Pets Set (Low Poly) This set includes four minimalist low-poly pet figures designed in a clean, modern geometric style: Dog, Cat, Rabbit, and Hamster. The models are intentionally highly simplified, focusing…
Wydruk około 2,11 €–2,58 € nettoWstępna wycena jednego wariantu
Upgrade Prusa i3 Mk3 to 3D scanner! Main features: Project prepared for printing on any 3D printer, e.g. Prusa Mk3 or Mk2.5 Electronic components (stepper motors, controllers, etc.) are not required. If you have a printer, then you have…
Wydruk około 0,66 €–0,81 € nettoWstępna wycena jednego wariantu
Please click if you appreciate my work :) Commercial License >> cults3d.com/:2672265
Wydruk około 2,97 €–3,64 € nettoWstępna wycena jednego wariantu
Zip-Tie Garden Hose Coupler | 16mm Water Line Connector This simple yet effective 3D printed connector lets you quickly join two 16mm diameter garden hoses without specialized tools or fittings. Perfect for extending your watering reach…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A tiny World Globe that can be assembled in parts or printed as one part. Also includes "just the globe". You can read about how the globe was created at: Enely's 3D - The World Globe Print each half and glue together to avoid support.…
Wydruk około 0,97 €–1,18 € nettoWstępna wycena jednego wariantu
The ring segments for a Happy planner notebook organizer. I printed with tricolour PLA, 0.20mm Quality .4 nozzle Supports on build plate
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
I created this remix because the original version was a bit larger than I needed, and I wanted to fit the cables in more snug. The original also broke when I went to attach the zip-ties, one bit snapped off. It was still usable, but I…
Wydruk około 0,95 €–1,16 € nettoWstępna wycena jednego wariantu
Portafilter Funnel for espresso machines, comes in multiple sizes. Features: Tamp through Prevents waste (Spill over) Sits properly no magnets needed! Works well in combination with WDT tool Easy to clean Beautiful Print instructions…
Wydruk około 1,75 €–2,14 € nettoWstępna wycena jednego wariantu
A funnel that fits the windshield washer fluid reservoir for a 2016 Volkswagen Golf (and other VW/Audi models). Print settings Material: PETG Layer height: 0.20 mm No supports needed. Seam position: Random Perimeters: 8 (avoids top and…
Wydruk około 3,43 €–4,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The original model from thingiverse.com called “Brio/ Thomas rail switch (Duplo design)” by FuriousSun is quite nice. However, I think having female connectors on one side, but male connectors at the other side fits better with the…
Wydruk około 0,43 €–0,52 € nettoWstępna wycena jednego wariantu
Resin printing can be messy. Use your filament printer to create this funnel, screw it onto the resin bottle, line it with the paper filter and save unused resin without the mess. The thread on this funnel is designed for 1 kg resin…
Wydruk około 5,14 €–6,28 € nettoWstępna wycena jednego wariantu
Inspired by my accuracy test I designed this littel toy to try out loose fit and tight fit of parts. To work it needed some sanding after the print.
Wydruk około 0,21 €–0,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
From my experience, only Prusament rolls fit properly in the grooves under the Mini. And even then, it doesn't turn super smoothly. I made this lazy Suzanne so that I can use it with any filament brand, no matter how wide the center hole…
Wydruk około 2,26 €–2,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Very sturdy sieve. You have to measure your rain gutter drain hole and scale the model accordingly. At my house every drain hole is different because they are handcrafted. Measure the hole crosswise! The model has a circle with 90mm. The…
Wydruk około 2,56 €–3,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Gas cylinder spanner for camping or barbecue gas cylinders with spanner for gas pressure reducer, 30mm, 18mm and 17mm. Dimensions: Width 168.17 mm Height 8.00 mm Depth 56.20 mm Print: PETG Filling: 100% Filling pattern: straight No…
Wydruk około 2,68 €–3,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Can be placed on the table or attached with 4pcs of 5mm screws. Manufacturing instructions: Material: PETG 3D Printer: FDM 3D printer, average print time 4,5 hours. (with MK4 input shaper feature enabled) Slicer settings: 0.2mm layer…
Wydruk około 6,41 €–7,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Small but handy powder funnel for Luger 9mm and .223 Remmington / 5,56 NATO. Fits resized cases perfectly. Designed to be usable in reloader big hands... ;) Print instructions Category: Tools Print Settings Printer Brand: Prusa Printer:…
Wydruk około 1,12 €–1,37 € nettoWstępna wycena jednego wariantu
A weather tight (not waterproof or dust tight) box for extension cord ends. Has basic locking tabs to keep the cover attached. Fits a medium duty US extension coord but can be scaled up if it needs to fit a larger plug. Due to its outside…
Wydruk około 3,54 €–4,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Part of my series of enclosures designed for Shelly smart devices and Wago 221 connectors. Shelly box for T&E 3x slots and wago 221 connectors (this one) Shelly box for inline flex wire and wago 221 connectors Shelly box for 2x flex wires…
Wydruk około 3,61 €–4,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Mickey and Minnie Mouse Mickey and Minnie in an old style design. Single extruder multi-color design. First layer: Yellow Second layer: Red Third layer: Blue Fourth layer: White Fifth layer: Black
Wydruk około 3,69 €–4,51 € nettoWstępna wycena jednego wariantu
Spool Wind Spinner: Another Way to Recycle a Filament Spool Product Description: Transform your empty filament spools into a vibrant Spool Wind Spinner with this innovative design! By printing the blades and end caps that hold bearings,…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
Hose quick connector male to ¾" BSP commonly found on UK garden hose fittings e.g. Hozelock, Gardena etc. Add one standard o-ring 2.5x11 (OD: 16mm, cross section 2.5mm) to make leakproof. I printed in standard PLA settings, supports…
Wydruk około 1,05 €–1,29 € nettoWstępna wycena jednego wariantu
Am besten ist es den Halter aus PETG zu drucken da dieses Filament die nötige Festigkeit hat und auch flexibel genug ist die Vibrationen zu verarbeiten.
Wydruk około 0,97 €–1,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Tired of searching for screws and small items in various jars and containers? This 3D-printed organizer is the solution! Easy to Use: Simply pour the contents of the jar into the organizer for a neat and organized setup. Special Funnel:…
Wydruk około 2,35 €–2,87 € nettoWstępna wycena jednego wariantu
A small funnel for tire sealant especially for Presta valves (with thread)
Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu
Popis modelu pro 3D tisk přívěsků Mickey Mouse a Minnie Tyto modely přívěsků na klíče ve tvaru obličejů Mickey Mouse a Minnie jsou ideální pro vícebarevný tisk pomocí MMU (Multi-Material Unit). Modely obsahují charakteristické rysy obou…
Wydruk około 6,30 €–7,70 € nettoWstępna wycena jednego wariantu
A remix of the JST Connector Pliers to keep them from falling apart. This model will need one heat-set insert for a 3mm screw and a 3mm x 6mm screw to keep them together. As with the original model, print in your choice of filament with…
Wydruk około 1,77 €–2,16 € nettoWstępna wycena jednego wariantu
Compatible with any 54mm basket of Sage/Breville Barista Express, Barista Touch and Barista pro enjoy
Wydruk około 2,89 €–3,54 € nettoWstępna wycena jednego wariantu
Manufacturing instructions: Material: PETG 3D Printer: FDM 3D printer, average print time 2 hours. (with MK4 input shaper feature enabled) Slicer settings: 0.2mm layer height, 4 perimeters, generate supports everywhere, brim Post…
Wydruk około 2,92 €–3,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The original Part part did not fit on my boxes. I wasn' t able to mount it on the box without it breaking apart. On my box the material perhaps is a little bigger? In addition, it would not have been possible to open it because the…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I was not able to find a pin cover for the battery connector of my eBike (Pedelec) to buy. There are models available for the earlier Bosch system, but I didn't find any for the (new) Bosch Smart System (BES3), hence I designed my own.…
Wydruk około 0,37 €–0,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A holder for your phone to allow you to scan TCG cards like Magic the Gathering, Pokemon, Yu-Gi-Oh, etc. Inspired by the Card Slinger and DIY scanner stands, but designed from scratch to print within the build volume of my Prusa Mini…
Wydruk około 5,30 €–6,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Perfect for 1kg resin bottles and large resin vats, since most funnels I used were not large enough to contain the initial onslaught of resin Vat holder fits most 1cm diameter laboratory ring stands, funnel fits 3" and 2" retort rings,…
Wydruk około 6,00 €–7,34 € nettoWstępna wycena jednego wariantu
I couldn't find any printable bipod that was both strong and didn't require excessive hardware, so I designed my own. The goal was to minimize the amount of fasteners used, print all required springs as compliant mechanisms, and make it…
Wydruk około 2,78 €–3,40 € nettoWstępna wycena jednego wariantu
Replacement friction fit pin and cap for twister spinner. Does not include spinner.
Wydruk około 0,71 €–0,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I love Wind Spinners! I got some Blue ABS in the mail today. I like how the two winged cardinal came out, so I designed the body of a Blue Jay. I can't wait until my Prusa Multi-media adapter arrives. Then I can better color the wind…
Wydruk około 2,47 €–3,02 € nettoWstępna wycena jednego wariantu
I saw geodesign's grid and canals for Takenoko and really liked the models (maybe because just the day before we'd managed to accidentally knock over our elaborate tile layout ☹). However, I really wanted single tile holders, not triples.…
Wydruk około 0,55 €–0,68 € nettoWstępna wycena jednego wariantu
I seen how expensive the badges are, so design them. (Made it it for a friend) Perfect size to the originals Recommend print in ASA plastic with 100% infill (UV resistance) Small LIMITED badges are for the sides (X2) This look me a long…
Wydruk około 2,71 €–3,32 € nettoWstępna wycena jednego wariantu
Complete Yagi Antenna Clamps Collection — Universal, Dedicated & 6m Heavy-Duty (Boom 15 to 30 mm) A popular, highly versatile antenna clamp collection designed to fit multiple Yagi antenna configurations. Thank you to the ham radio…
Wydruk około 0,72 €–0,89 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple holder for the camera TrueLife NannyCam H32. Base and holder are separately and ready to create your own holder. Both parts are conneced togetther with two M3x12 screws and two M3 nuts. Supports are required for a base only. Screw…
Wydruk około 3,96 €–4,84 € nettoWstępna wycena jednego wariantu
Gridfinity bin for Dremel It has a 1x2 bin footprint. Used for Dremel spanner, chucks and standard 3.15mm (1/8") tools. I really needed a bin with both spanner and tools, and figured I'm not alone. There's no lip on the bin since You…
Wydruk około 3,13 €–3,83 € nettoWstępna wycena jednego wariantu
A simple keychain of a running shoe. Modeled using a picture of the Adidas Duramo SL Here is a similar model of a Saucony running shoe that I made. Slicer instructions: The STL has 5 different parts (bodies). You can customize the slicing…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
Designed a tunnel for my hotwheels fanatic. It's a 4-lane tunnel for four cars or 2 (1:64 scale) monster trucks. The standard hotwheels connector fits on both sides. The top has a row of holes, for a hotwheels emblem. The emblem also…
Wydruk około 1,08 €–1,32 € nettoWstępna wycena jednego wariantu
This little bracket makes it easier to construct an ultra-light directional radio antenna using aluminum arrow shafts. The bracket slips onto an arrow shaft which acts as the antenna boom and allows simple attachment of arrow shafts to…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I shoot a lot of Instax, especially now that I adapted a LomoGraflok back to my Graflex SLR, and I like to scan the film for sharing or before giving away the unique physical copies after shooting portraits. I designed this frame to save…
Wydruk około 1,58 €–1,94 € nettoWstępna wycena jednego wariantu
Description An affordable Arduino Turntable designed for Time lapse photography. It can also be used for Photogrammetry or Video by adjusting the code. By default it triggers the camera then turns a predetermined number of steps then…
Wydruk około 3,09 €–3,78 € nettoWstępna wycena jednego wariantu
![PaScn3D Mk.0 - 3D Scanner [PrusaPrinters Contest Edition]](https://media.printables.com/media/prints/23297/images/237355_72dadc53-8e36-4086-b7eb-9482eba771ac/step27.png)
