Wyniki wyszukiwania: nod

Jednoduchá funkční loďka / Little Boat

Jednoduchá lodička, která může dělat radost dětem jak ve vaně, tak zvládne venku i klidnější potůčky... Rozměr 4x7 cm.

Jednoduchý sběrač nečistot v bazénu

Praktický sběrač nečistot vyrobený z bazénových hadic 32 mm, nasazený na odtah z bazénu. Je třeba hadici před použitím důkladně naplnit vodou, aby nenasálo čerpadlo vzduch. PETG, bez podpěr, 0,30mm DRAFT, tryska 4 mm

Brotherhood of Nod keychain

Keychain with the Brotherhood of Nod symbol from the Command and Conquer games. Print the first half in red and the second half in black. I added a 3mf file with a material change.

12mm Square Node Pixel Puller

With this I can get square nodes out much faster. Tested against super thick and tight pixstrip extreme, I've only pulled 30ish pixels with this so far but it's held up okay, v3 reinforces it a bit and makes it pointer for easier wedging.…

WC bril en wastafelkraan sleutel. Toilet seat and sink faucet key. Clé de siège de toilette et de robinet de lavabo. Llave para asiento de inodoro y grifo de lavabo.

Het is altijd moeilijk op uw rug onder de lavabo of wastafel te liggen om die moeilijk te bereiken moer los te maken. Daarom heb ik deze pijpsleutels zelf afgedrukt, in de maten m13, m12, m11, m10, m9, m8. Ook een verlengstuk dat je kan…

Horizontal Balcony Rail Mount – SenseCAP Solar Node P1

A one-piece holder that lets a Seeed Studio SenseCAP Solar Node P1 (or P1-Pro) live horizontally on a balcony railing instead of a wall or a mast. WHY THIS PART EXISTS The Solar Node P1 is built to be bolted to a wall or clamped to a…

nanodidg

This model is not my original creation , kudos to the original author Dan Sayers who gave me permission to upload this awesome parametric model created in OpenSCAD . nanodidg is a compact 3D printed musical instrument inspired by the…

Bender Battery Case for the Heltec V3 & Heltec T114 Meshtastic MeshCore LoRA Node

***BENDER2 WITH HELTEC V4 SUPPORT, GPS SUPPORT AND 4x 18650 BATTERY SUPPORT IS AVAILABLE FROM MY WEBSITE HERE *** Bender is a 3D printable case for the Heltec V3 and Heltec T114 LoRA Meshtastic powered Radio node. It features a bay for an…

200mm Fan Front for Fractal Node 304

Featured in “Wolfgang's Channel” channel: This is a custom front design to fit a 200mm Fan with custom 3mm mesh or dust filter for the Fractal Node 304 Case. I am using a 200mm Noctua fan (Noctua NF-A20 PWM chromax.black.swap) that only…

Skull Helmet Stand (Ballistic/Bump/NVG/NODs, etc.)

Remix of: https://www.thingiverse.com/thing:6341148 and https://www.thingiverse.com/thing:2596157 I have used a different skull that is simpler to print and much faster to print (half time for my settings). I used PLA-CF which came out…

Low Profile Solar Meshtastic Car Node

This design is now open for remixes, please give attribution and link your remixes to this page! I'm happy to link back to remixes or add them on this page to keep everything in one place. Update 31 December 2024: Added a shell option for…

Flexo Meshtastic powered node case for Rak WisBlock, HeltecV3, T114, T190, WirelessTracker and RaspberryPi Pico

NOW UPDATED WITH SIMPLER UNIVERSAL POWER SWITCH DESIGN INTRODUCED IN BENDER2 Bender's bigger, badder brother is here! Meet Flexo, the most flexible Meshtastic powered node "case kit" available… and its FREE to print! Check out the intro…

Simple Barbie chair | Jednoduchá Barbie židle

Simplified model of barbie (doll) chair for Barbie house or Barbie caravan. From PrusaSlicer 2.4 turn on Thick bridges (old mode bridging) for better results. Material: PLA Nozzle: 0,4 mm Support: no Brim: yes (5 mm)

NodeMCU ESP8266 Case Rev1

A sealable case for the NodeMCU ESP8266. Mounting screws hold in place while the lid snaps tightly on top and wont come off easily. This can be used standalone or as part of a larger project or design. This thing was made with Tinkercad.…

Magsafe Meshtastic Node

This is an enclosure to keep a RAK Wireless RAK19003 base and its RAK4630 LoRa module on the back of a Magsafe compatible phone for use with Meshtastic. It adds about 16mm to the total thickness of the phone. It can also be stuck to flat…

simple carbine / jednoduchá karabina

EN: Simple carabiner with safety lock against opening and slipping out in three sizes. It is a plastic product - it cannot be used instead of a real metal carabiner! Rather suitable for hanging toys to a baby stroller etc. CZ: Jednoduchá…

ESP32 NodeMCU Dev Kit C Case

Simplistic case for esp32 (devkit c). It has a snug fit for the esp, pin and usb breakout and lets you easy remove the esp board. The case itself is meant to be glued together. The purpose was mainly for my private projects, but I wanted…

Pteranodon Updated

Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…

ESP8266 nodeMCU V2 Case

Fusion 360 source file available! UPDATE 27.03.19: Remodeled designs from scratch in Fusion 360 and added slots to fit full size dupont connectors as follows: V2 - similar to the original but with duponts V2_Hollow - hollow bottom, more…

'26 Harbor Breeze Solar Mesh Node Mounts (Meshtastic/Meshcore)

Lowe's Solar Flood Light Mesh Node Bracket System Lowe's Harbor Breeze Solar Light (Item #1234868 | Model #ZDL1362): https://www.lowes.com/pd/Harbor-Breeze-60-Lumens-1-Watt-Black-Warm-White-Solar-LED-Spot-light/5018244381 This is a custom…

Pteranodon - print in place dinosaur model

This is still a work in progress and not the easiest print to get out of your 3d printer (please refer to the 3mf for a suggestion on where to place supports). Things might (still need to) change, but I wanted to submit it for for the…

ESP8266 NodeMCUv2 Tall Case

This case allows you to put the dupont wires inside the case rather than outside (in case you have a cat that likes to knock your stuff around). It provides a bit more security to keep things from being disconnected.

NodeMCU V3 Case

Needed a case and didn't find one I liked so I designed my own. I wanted something very minimal with thinner walls to reduce print time and material used. There is a port on the bottom of the case for wires to feed through as well as a…

DINODICK

v2 Meshtastic 3W Solar Enclosure Base Station LoRa Node for 3 Watt Solar Panel

This is a water resistant outdoor enclosure designed around a 3 watt solar panel. It was designed with Meshtastic in mind but it can be used for any solar project. --- Buy it fully assembled and ready to extend your mesh network :…

Nods Or Nothing V1.2

Nods Or Nothing V1.2 by QwermMakes Nods Or Nothing is a replacement housing for the Nerf Modulus Day/Night Scope, a cheap IR digital camera. The original scope does not have very good mounting options and let’s face it, your poor ass…

ESP8266 NodeMCU v3 Din Mount

just a stretched version fitting ESP8266 nodeMCU v3 from https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/samwiseg0/esp8266_nodemcu_din_mount by samwiseg0

NodeMCU (ESP 8266) Case

Hello friends this is a simple case the Node MCU (ESP 8266). Route the cables through the case bottom before you solder them to the Node MCU. Support is needed for the Case Bottom. Print Settings Printer Brand: Creality Printer: Ender 3…

NodeBrix Modular Case System for Heltec LoRa32 v3 and RAK19007 for use with Meshtastic

Update 5-29-24 Updated 18650 suction cup backs for less supports. ----------------------------------- Update 5-22-24 Uploaded large encoder knob STL that I forgot to include. ----------------------------------- NodeBrix Modular Case…

NodeMCU v3 Case

I liked the case plasmata designed, but needed more space beneath for easier pin access. This version provides more space and an unnecessary vent on the lid. ***UPDATE: Added a base version with two holes for wire access.

Multisensor ESP32-WROOM-32 NodeMCU ESPresense

My first take on building my own sensor for presence detection in our rooms. All cases I tried either didn't fit the board or weren't able to house the sensors. So I designed one myself. It fits the AZDelivery ESP32 NodeMCU…

Pteranodon Skeleton

Pteranodon ; from Greek πτερόν and ἀνόδων is a genus of pterosaur that included some of the largest known flying reptiles, with P. longiceps having a wingspan of 6.5 m. They lived during the late Cretaceous geological period of North…

Hanging Solar Node - for use with Meshtastic and Meshcore LoRa Devices

Overview: This enclosure is designed for outdoor solar nodes/repeaters to be hung from tall objects such as trees, giving users the ability to place their nodes at higher altitudes on their property when they don't have the ability or…

NodeMCU ESP32 S2 with DHT11 Sensor Case

This is my rendition of a case with lid for the ESP32 S2 NodeMCU board to house the DHT11 temperature and humidity sensor. This model also have the Home Assistant logo embedded on the side. This simple design ensures a tight fit for the…

Hermes External Solar Node Enclosure for MeshCore Meshtastic V2 for Rak and Heltec

Hermes is an easy to deploy external node enclosure, version 2.0 now supports the RAKWireless 19007/19003 and HeltecV3/V4 (with MPPT solar controller!). It enables you to deploy external nodes for MeshCore or Meshtastic (or others!)…

Meshtastic 6W Solar Enclosure Base Station LoRa Node for Soshine 6 Watt Solar Panel

UPDATE: I created a new Meshtastic solar repeater node. There's nothing wrong or bad about this 6W version, it works great. However, I consider the new version to be the ideal Meshtastic solar base station when balancing uptime with size,…

NodeMCU V3 (ESP8266) Case

There are 3 parts to this. The top, bottom and an accent colour board (for some extra fun). The design doesn't serve too much of a practical purpose (the hexagons look cool) but, the pins are recessed into the case to prevent them from…

Node Robot Platform - SMARS inspired using ESP8266

Node Robot Platform using ESP8266 for robotic development. This project is inspired by the SMARS robot but use ESP8266 as it heart for out of the box remote control. Hardware Needed hardware (all the link is for reference): 1x ESP8266…

Meshtastic Vehicle Utility Node Enclosure for LoRa - Supports GPS and a Wide Voltage Input

This is a water resistant compact enclosure designed for RAK Wireless baseboards (RAK19007 and RAK19003). Use it in your car, under your roof eave, or use it for quick deployment situations. ---------------------- Buy it pre-built and…

EnVeeGee 2.0 DIY Night Vision - PVS69 Alpha based NODs

Copy-paste of Creative-Extension11 's wonderful DIY Nods. All info is included in downloads. Please notify me if anything is missing. The EnVeeGee is a digital-only refinement of the PVS-69 created by VonScherfArms. Using the technology…

Meshtastic FakeTAK "Commander" Tacticool big boi water Resistant, RUGGED, ATAK, GPS, outdoor node

UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…

ESP32 NodeMCU case

A remix scaled up a bit to fit an ESP32 nodemcu Category: Electronics

Board for development with Arduino Uno, RPi4B, ESP8266 Nodemcu, Wemos D1 Mini

I constructed this board to hold the above mentioned controller for development purposes. The part was printed with PLA with a layer of 0.3 mm. Any other filament works too. No rocket science. Step file included. F360-file on request. The…

ESP8266 node MCU V3 Case

ESP8266 node MCU V3 Case from AZ-Delivery

Knitted Pteranodon - NO AMS Dino - Cute animals

💖✨ Thank you for always being by my side, giving me energy, and inspiring me to create even more designs for you 🥺💞 If you’d like me to keep going and bring you even more adorable models, you can support me on Patreon:…

Meshtastic Heltec T114 and 18650 Mobile Node

Simple mobile/pocket enclosure for a Heltec T114 board with an 18650 battery. Most models place the battery behind the board, resulting in a bulky enclosure. This is about as compact as possible. Assembles with eight M3 heatset inserts…

Fractal Node 304 HDD mount cage

I started off with this model from thingiverse but since I'm mostly printing with PLA it was too wobbly compared to the original metal mount. I also suspect that PLA will isolate heat rather than help dissipate it like the metal mount…

Terminal for SSD1106 1.3'' OLED and NodeMCU v3 ESP8266, without soldering

This is a remix of an original terminal for a Wemos D1 Mini. Since I am unfortunately a total novice with regard to soldering, I was looking for an equally nice looking terminal, without the need to solder. I increased the depth of the…

Parametric Case for LoRa Heltec V3/V4 (Meshtastic Node)

Parametric Heltec V3/V4 Case (Meshtastic) This is a fully parametric remix designed to house Heltec V3 and V4 boards for Meshtastic nodes. It features a customizable enclosure that has been tested to scale from 60x40x30 mm all the way up…

Case for Elecrow ThinkNode M2

This is a case for the ThinkNode M2 Meshtastic board. I found a full STP file on Github. It appears to be the file for their injection molded case. I imported the file into Fusion 360. I then modified some of the parts to make them 3D…

NodeMCU V3 Case

I wasn't entirely happy with other models, so I created my own. minimal size to protect all header pins cutouts for USB port, the 2 buttons and Dupont connectors You just need 2x countersunk M3 screws or friction fit the top (for this you…

Compact case for Heltec v4 GPS Meshtastic node

Description Compact printed case for Heltec V4 Meshtastic client with GPS. External dimensions are 74x44x21.7mm. This case meant to be used with this default Heltec V4 GPS set: Required BOM 803048 Li-Po battery (consider buying with…

Skadis NodeMCU ESP-32S Case

This is a case for the NodeMCU ESP-32S development board by Ai-Thinker that can be mounted on an Ikea Skadis pegboard . It uses Skadis T-Nuts for secure and easy installation. Note: This was made for the Micro USB version of the board and…

Power Node 1

Just creating items for Star Wars themed props. Base diameter = 42mm Height = 16mm Print Settings Printer Brand: TEVO Printer: Tarantula Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.15 Infill: 20 Filament: filament PLA any…

Esphome nodemcu esp32 media player

The purpose of this project is to create an inexpensive audio player for home assistant that can be plugged into an existing stereo speaker system. With this system, you can also build a simple mono amplified speaker that can be used as a…

NodeMCU ESP8266 Enclosure

Enclosure for a NodeMCU ESP8266 development board. The model fits boards with measurements being roughtly 26X49mm. The model is designed so that 5 Wagu 221 connectors can be mounted for connecting the LED-strip through a hole en one end…

Heltec VisionMaster E290 LoRa mesh node slipcase, slim and fat designs.

A slip case for Heltec Visionmaster E290: Easy to print, comes with several variations: Slim and fat designs. The slim design has 6mm clearance between the top of the LoRa transceiver module and the case back The fat design has 23mm…

2 x Node Nvidia DGX Spark (GB10)Cluster Side Vent Cooling Duct

This is a cooling housing for DGX Spark and related AB10 AI supercomputers. It extracts air from the rear vent while maintaining access to ports. It fits in a 3U rack space, takes a 120 x 120 x 25 mm fan, and has rails for a 140 x 140 mm…

W9ETC Meshtastic Solar Node

W9ETC Meshtastic Node This is a very versatile "universal" enclosure. The PCB Cage in the enclosure accommodates the RAK 19007 Starter Kit, Heltec WiFi LoRa32(V3), Heltec T114, or any other similar board sizes less than 60mm x 35mm x 11mm…

NodeMCU ESP32 Devkit V1 with DHT11 Sensor Case

This is my rendition of a case with lid for the ESP32 Devkit V1 NodeMCU board to house the DHT11 temperature and humidity sensor. This simple design ensures a tight fit for the ESP32 Devkit V1 board, and also a squeezed fit for the DHT11…

Node 304 SSD Caddy

I printed mine out of ABS with 4 perimeters and 4 solid top/bottom layers on its side. The following are needed to fit. 4 Printed Parts 8 M3 nuts 16 M3 X 6mm socket button head screw

NanoDeo - Small Deodorant Container

This compact deodorant container is designed for convenience and portability. Perfect for fitting into small spaces like pockets, purses, or travel kits.

2 x Node Nvidia DGX Spark (GB10) Cluster Cooling Duct

This is a functional 2 Node Cluster cooling duct for GB10 AI super-computers like the Nvidia DGX Spark, ASUS Ascent GX10, Dell Pro Max, Gigabyte AI TOP Atom, HP ZGX Nano, MSI EdgeXpert, and ThinkStation PGX. It fits in a 3U rack space,…

Fractal Node 304 better cooling front cover Mod

Hey folks, inspired by the video on Wolfgang's channel I became aware of @pixelwave's design. At first I really liked it, but after I printed it out and was in the process of preparing the case, it occurred to me that I need to do…

NodeMcu_V3 ESP8266 Double Relay Case2

Rafts: No Supports: Yes Infill: 20%

Pteranodon Skull

Lay the stand flat. Orient it so it's facing corner to corner. Decide on how big your printer will allow you to print it. Stand the skull up and rotate it to 45 degrees. Enlarge it to match your stand. Enjoy!

NodeMCU v3 + MAX7219 Case

This is a case for holding a NodeMCU v3 and 4x 7-segment MAX7219 8x8 led matrix. NOTE : The holes for the NodeMCU board are not properly aligned. The board fits but screws are a little angled. Will fix soon. Category: Electronics

Meshtastic "WAYPOINT" water resistant, outdoor, solar assisted ATAK "repeater" node (faketec/ HT T114)

UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…

Case for OpenDTU/AhoyDTU (for 38 pin ESP32 NodeMCU)

Simple case for an ESP32-WROOM-32 (38-pin, 28x55mm) NodeMCU Dev board with NRF24L01+ antenna board. Prints without support. NRF24L01+ module stay in place once antenna has been screwed on. I used a bit of blu-tack to keep the ESP32 in…

Wemos D1 Mini Case (NodeMCU)

Hi guys, this is a simple case for the Wemos D1 Mini (NodeMCU ESP8266) . Route the cables through the case bottom before you solder them to the Wemos D1 Mini. Easily resized and customized in Fusion360 with the provided .f3d file.…

LWC Meshtastic "TAMAMESHI" portable Faketec Node

UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…

Meshtasitc Solar Node Mount

Mounting Bracket for IP67 Enclosure 150x100x70 TYP EC112170 This mounting bracket is specifically designed for the IP67 enclosure with dimensions 150x100x70 mm, Type EC112170. It allows for secure attachment of the enclosure to poles,…

NODO ESPAC V1.0 MHI-AC-Ctrl Case

You can purchase the Board at: https://www.nodo-shop.nl/en/our-products/228-espac-wifi-mitsubishi-heavy-industries-interface.html

NodeMCU v3 Case for WLED

a simple ESP8266 case Designed for use with WLED firmware Assembly instruction Print the case Solder power and data pin to the NodeMCU pull the cable through the hole in the back put the MCU board into the bottom part of the case put the…

1xSSD to 6xSSD bracket (for Node 804 and other PC cases)

Converts a 1xSSD (or any 2.5") mount into a 6xSSD bracket, with multiple mounting options. If your case has 4 screw holes used to mount an SSD (flat orientation), this bracket should work for you. Multiple mounting options: Flat…

Enclosure / Case for ESP8266 / NodeMCU / ESP12-F

Case / Enclosure for an ESP8266 / NodeMCU / ESP12-F Key Features: Accessible USB Port Prints without supports space for 3-5 wires no screws required, just click it together I'm using it for WLED Projects.

Meshtastic Faketec "Copywolf" modular Cyberpunk style node

UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…

LoRa Meshcore / Meshtastic Solar Repeater / Node 175mm

UPDATE: 2026-07-29: Added Bridge Support Upper V2 UPDATE: 2026-07-25 Added Bridge 175 V6 and bridge support lower and upper for 2X T114 and 3065 . UPDATE: 2026-05-18 Added Tall Antenna support for long antennas +80cms with 23mm radius…

The People's Companion - Affordable DIY Mesh Node

The People’s Companion: A low-cost, LoRa mesh companion radio for Meshtastic or Meshcore. The People's Companion is an affordable LoRa mesh companion radio build using reliable, low-cost parts like the Seeed Studio Xaio Development Kit…

LCD Display. Case MAX7219 + NodeMCU Lua Lolin V3

Display box for 4xMAX7219 (Multi filamente + Single filament version) You can use PLA, PETG or others but of a light color (recommended white) , since the screen has 0.8mm of plastic in front that is used as a diffuser. MMU version…

ESP8266 - NodeMCU V3 - Case

This is a case for the NodeMCU V3 - ESP8266 (e.g. for AZ-Delivery ESP8266 NodeMCU Lolin V3 ) esp8266_case_box v5 : added two holes to mount box with screws on a plate (e.g. with 2xM2). I hope you like the model! → Makes and Comments are…

Nodes Construction Toy

Nodes is a construction toy that lets you build large wireframes with minimal material. Use those filament scraps for something big! https://youtu.be/Wj0XRU5XRyo Printing No supports needed Requires some precision for a nice part fit Use…

Simple tube case for Heltec Wireless Stick Lite V3 Meshtastic node

This is a very simple case for the Heltec Wireless Stick V3. It has an N-type antenna mount on top and an M12 cable gland for USB power on the bottom. Since this is a stationary node, there is no battery inside. The case consists of three…

GUNDAM THE WITCH FROM MERCURY : GUNDNODE節點機

鋼彈水星的魔女 : 節點機 GUNDAM THE WITCH FROM MERCURY : GUNDNODE Our Fan pages： https://www.facebook.com/profile.php?id=100092846353992&mibextid=ZbWKwL

Meshtastic "FakeCAP" ultra Slim NRF52 GPS node

UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…

Noddy

Noddy, a fictional character created by English children's author Enid Blyton. He was made by a woodcarver in a toy store but ran away after the man began to make a wooden lion, which scared Noddy. After some very interesting adventures,…

NodeMCU Case

A case for housing a NodeMCU (ESP8266) board with enough room for cable management. I added holes on both sides to get your sensor cables out of the case, if needed. The case is also high enough to house all of your cable mess. Walls are…

Waterproof Solar Enclosure for LoRA Node

This is a fully 3D printed enclosure I use for my Meshtastic solar nodes. It includes provisions to stick a solar panel directly to the lid. It also includes a separate holster you can screw into a wall and then just slide the node into…

Meshtastic birdhouse node

Simple print to attach an enclosure for RAK 19007 to Amazon security cam solar panel. This is the solar panel I used: https://a.co/d/1mVprlk Enclosure was glued onto the bottom of the panel using 3m marine adhesive. I designed a tray that…

Articulated Pteranodon

Articulated Pteranodon also know as flexi Pteranodon to be printed as a fidget toy Made using Blender 3.2 Please do visit and purchase our products over at CGTrader https://www.cgtrader.com/evoformz

RAK 4631 Meshtastic Node

Case for Meshtastic Node

LWC Meshtastic "BEACON" rugged, waterproof** GPS outdoor node

UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…

Meshtastic FakeTec F1 Micro Node (NRF52)

UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…

RV Water Heater Anode Port Cover

This is a threaded plug that is designed to fit in the anode port of a Suburban brand hot water heater commonly found in RVs and travel trailers. The plug has a grid-shaped vent to allow for airflow into and out of the water heater…

Case for NodeMCU ESP8266 V3 + RS232 to TTL Breakout Board

The lid snaps in, just screws for mounting the electronics required

Handheld RNode

An RNode is an open, free and unrestricted digital radio transceiver. It enables anyone to send and receive any kind of data over both short and very long distances. RNodes can be used with many different kinds of programs and systems,…

Heltec Mesh Node T096 case for 18650 battery

I got bored of boring boxes and military inspired cases so I decided to go a bit crazy with a retro futuristic with this design. What you'll need: 5x M3 5mm screws. The inset holes are 6.2mm for the screw heads. The model has threaded…

Case for ESP8266 NodeMCU and BMP180/BMP280

This is my remix of the Sensor Node Enclosure for ESP8266 by calvinboey on Thingiverse . I changed it in order to fit an ESP8266 and a BMP180, so I made it smaller and closed nearly all openings. Other sensors should also fit in the box,…

NodeMCU Enclosure

Enclosure for a NodeMCU ESP8266 board. Allows space for connections onto the male header, with a small cable exit. Also allows access to the USB port. Use two short M2.5 countersunk screws to hold the lid in place. This also clamps the…

ESP32S NodeMCU Case - v1

This is my rendition of a case with lid for the ESP32S NodeMCU board to house the DHT11 temperature and humidity sensor. This simple design ensures a tight fit for the ESP32S board, and also a squeezed fit for the DHT11 sensor. Also,…