471 modeli
Cover für das Victorinox Mini, lasst bitte einen Like da oder folgt mir für mehr damit ihr nichts Neues Verpasst Danke MazZe_2880
Wydruk około 0,25 €–0,31 € nettoWstępna wycena jednego wariantu
Do your Victorinox Swiss Army knives currently live in a messy drawer, forgotten and unloved? Do they deserve a VIP spot where they can shine in all their multi-tool glory? Say hello to the Victorinox Swiss Army Knife Hooks for IKEA…
Wydruk około 0,10 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Saya pro kuchyňský nůž Victorinox opatřena samolepicí magnetickou fólií tloušťky 0,5 mm
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
This is an updated version of my Print-in-Place Container for Victorinox Tomato Knife . The old version had some issues when inserting the knife and the magnets didn't fit well. The new version still need two magnets (≤ 8mm diameter) but…
Wydruk około 1,70 €–2,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I created this model using Tinkercad to replace a lost clip for one of my Victorinox Swisscard Lite. I printed it several times until I fitted the form perfectly using PETG and also PLA and finally, this model works perfectly using both…
Wydruk około 0,03 €–0,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model was made to display the Lenox Cinderella Castle 2024 ornament as a desktop ornament instead of being hung on a tree. It was printed with PETG and requires no support material. Use a piece of wire or twist tie to attach the…
Wydruk około 1,08 €–1,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A stand with a cutout for the charging puck(?) that comes with the Carbinox X-Ranger Watch (https://shopcarbinox.com/products/carbinox-x-ranger), designed to be printed with minimal supports while still allowing for the watch strap to sit…
Wydruk około 4,11 €–5,02 € nettoWstępna wycena jednego wariantu
I want to share my latest weekend creation. An epic “Kurvinox” character from well-known Polish cartoon “Kapitan bomba”. Designed from the ground up in 3Ds Max as a multipart print for assembly. Printing tips: Print one part at a time (or…
Replacement scales for Victorinox Swiss Army knife 91 mm. In the files section there are a few different variants, in particular with and without the slot for the toothpick and tweezers and with and without the Victorinox cross logo; as…
Here's my take on the pocket clip for Swiss Army Knives. The clip threads on to the corkscrew and holds the knife securely in your pocket. There's two versions: V1 is for regular SAK - here the clip rests on the side scale and allows a…
Original model from https://www.deviantart.com/metlesitsfleetyards. This is a scale model of Nova Class from Star Trek Voyager, the scale is 1:2000 (original length: 180m) The model imported in prusaslicer is broken but i'm able to slice…
As I could not find any really good models of the standard Victorinox Toothpick, I designed my own in a few iterations. This is now the fourth version. It fits all my (by now relatively large selection of) Victorinox Swiss Army Knives…
I had sale this models on Etsy for some time but now it's free!
This model allows you to use Victorinox Dual-Knife Sharpener as you would your Spiderco Sharpmaker. It maintain angle for your sharpening rod at exact 30 or 40 degrees both at narrow and wide sharpener side. Micro variant is even smaller…
Well, I needed a sheath for a paring knife in the kitchen box of my camper. Printing a knife sheath is mostly problematic since overhangs and layer orientation tend to make the part weak, ugly or simply impossible to print. Then I had the…
Mine snapped in half after many years of use. Here is a simple replacement. Printed in PLA, with 0.05mm layer height. Lifted off the build plate without a brim so I recommend turning that on. PS: I only use this to clean out my phone usb…
This is a cassette for the Minox (and others that use the same cassette) cameras. Print instructions It requires a 0.25 or smaller nozzle at .10mm DETAIL setting and thin wall detection.
I have designed these for easy to click on and off, moreover it makes it easier to clean after use. All feet is stored separately and can easily fit into the Helinox chair zero storage bag together with the chair. It is also possible to…
I shoot and home-develop a lot of different film formats, and after releasing a few different reels for lesser used formats (110, APS, disc), I started getting approached by people wanting one of equal quality for the Minox 8x11…
This bracket allows you to mount a 40mm fan on the heat sink of the Mellanox ConnectX-4 (heat sink size 45x45x11mm). It is designed with the Noctua NF-A4x10 FLX fan in mind, but other 40mm fans might work. The bracket uses the four stock…
The feet on my Helinox chairs had perished, and rather than replace them with standard skinny versions and adding a ball foot adapter, I made these replacements to enjoy the best of both worlds. The Helinox ball foot adapter accessory is…
The Victorinox SwissTool Spirit X is - imho - perfect. Except for the missing tweezers and toothpick - a fix. PS: FreeCAD source file included. Category: Containers
kurvinox czy kurwinox - jeden uj.. drukujcie jak chcecie (150% wygląda zajebiście)
Victorinox microscrewdriver blank
Victorinox Rambler Knife Scales 58mm Beta testing: Also added scales that can hold two toothpicks per scale, because of the angles the tools do not fit flush. Category: Tools
NEW Added three slot version to support a mini 3d printed toothpick. Can use the original tooth pick slot for a fire steel. For best results you'll need a 0.2mm nozzle. Included a couple other versions of the opposite side in the 3mf.
Should press fit with moderate pressure, tougher fits can tap gently with a mallet. Printed on Flashforge Finder with PLA.
MAGNETS - Uses five 6x2 magnets (measured size is 5.94x1.6) inserted in the bottom. Place adjacent magnets in same direction. While not required to keep the bits in, it stops them moving around. The groove under the bits is ultimately…
I tried several 3d printed whistles and this one was the loudest, and so I've integrated it into a scale - much like the discontinued victorinox whistle scale. Also included opposite side plus scales with and without victorinox logo, per…
I have a lot of Victorinox knives in my drawer and they come without blade protection, I have developed a knife sheath for these knives. Now it's safer for everyone in the household and you can simply reach into your drawer and get the…
Simple Metal Detector stand that fits the Minelab Equinox series. (600 or 800) There are two versions of the stand. One with logo, one blank. I have this stand mounted so that it rests against the bottom of the control box arm. (See…
Easy to print, ideal with outside facing your print bed. Tested in PLA and ABS with 0.2mm layer height. Scales are press fit, if needed use parallel pliers to press them on your knife. Version with and without the Victorinox Cross, which…
I made this hex bit driver 6mm (1/4 inch) so I could use my Victorinox SAK as a repair screwdriver. No supports required but you might need a brim. Versions There are two versions one for 91mm like the compact, huntsman and the other one…
After I made my Inox Shaman model, I figured that it would be comparably easy to make an archer to match (since I could re-pose the male Inox Shaman body and then add the Archer accoutrements). It turned out to be a bit more involved than…
Customizable scales for a Victorinox knife with space for toothpick/tweezers
A simple fan bracket to hold a 40mm fan in place against the heatsink of a Mellanox Connectx-3. Untested at the moment, but people were asking for it. Uses M3x12 (ideally SHCS) or longer (the screws should go past the heatsink anyway,…
I broke my SwissCard pocket knife case about every 6 months. The small glued joints near the knife seemed to fail first. This is a FDM printable replacement. I have used it for 2 years now without any failures. After printing you can…
Thickened some parts, removed overhang on the side as much as possible to make it more ergonomic. You still need small touchup to remove sharp edges digging into your palm. I recommend using stiff filament for this. I printed with 0.6…
Print it laying on the site, the printer will bridge “across the blade.” If the blade doesn't go in, check the bridging direction and if needet adjust the angle of bridging in the infil tab (PrusaSlicer). If it still doesn't go in, lower…
PETG or ABS/ASA for weather protection some strength profile with more walls (6) print upsidedown without support better to use brim
I've made an Inox Shaman for Gloomhaven ( http://www.cephalofair.com/wp-content/uploads/2015/09/Inox-Shaman.jpg )! I initially modeled it in a pretty neutral pose, like in the official artwork... but without all of the cool details of the…
This is a simple credit card sized toothpick collection for emergency use. It fits 11 single toothpick and they are easy removable from the frame. They can be used also in all that difficult situation where you need something thin to…
Use a 3,2mm drill bit with a flat tip to clean the holes for a better fit. Scales should snap-on without a glue.
Victorinox Deluxe Tinker Beltholder This is a beltholder for your Victorinox Deluxe Tinker. You just need to clip the Deluxe Tinker in the holder to fix it. Your EDC is reachable with this holder. Have fun !
Victorinox 58mm scales with slot for pen, tweezer, toothpick and 2 pins/needle. One more slot is available for toothpick based tool.
Stand for 91mm swiss army knife multitool.
I shoot and home-develop a lot of different film formats, and after releasing a few different reels for lesser used formats (110, APS, disc), I started getting approached by people wanting one of equal quality for the Minox 8x11…
Simply screw onto corkscrew to attach.
This model is 99.999% RobagoN's amazing work ( https://www.thingiverse.com/thing:2905243 ). All that I did was to replace the horns that he sculpted with a set of the Inox horns that I sculpted, so that the horns on all 3 of my Inox…
A simple fan bracket to hold a 40mm fan in place against the heatsink of a Mellanox Connectx-2. Uses M3x12 SHCS or M3x16 SHCS. Keep in mind that you're (most likely) printing this in thermoplastic. If you pick a filament with a low HDT…
Small things tend to disappear occasionally. Same happened to a toothpick in my folded knife. This is quite tight replacement piece I fitted into my knife.
Print with your favorite color/filament and customize your victorinox pocket knife! Very simple to install, just remove the old ones and push the new ones in, just a simple pressure fit works well. Victorinox pocket knife dimensions:…
Because the vegetarian paté from Unox never has a lid included I designed one myself. It fits all the small Unox paté cans.
This very simple adapter allows you to use four common LR44 coin cell batteries to power your Minox 35GT, no more need for the long discontinued original battery!
Designed to fit a Victorinox boning knife, model number 5.6603.15 with the Fibrox black handle. If you want the TinkerCad link, let me know. Prints with the flat side down, no supports. 0.2mm layer height works fine, but I ended up going…
Sharpening guide for the Victorinox diamond knife sharpener. It helps you keeping constant angle (20°) when sharpening your EDC.
A small box for your EDC gear with a Swiss card as lid. Size is similat to an Altoids tin but a bit taller for more space. Printer: Ankermake M5 Layer: 0.2 Infill: 25% Supports: yes, organic Feel free to edit.
A blade cover I initially made as part of a gift. I've removed the monogram from the stls but have included the 3mf file so you can put your own in.
Fits: Chair One, Chair Two, Chair One XL, Sunset Chair, Beach Chair, Savanna Chair, Playa Chair, Chair One Mini, Chair Zero, Chair Zero L, and Chair Zero High-Back. Supports: Yes (everywhere) Infill: 30% The way this is uploaded, it will…
Transform your IKEA KNOXHULT kitchen cabinets with these custom-designed handles that offer a hassle-free installation process. Avoid the need for drilling and potential damage to your cabinets by using double-sided tape, such as 3M…
A simple but effective protect cap for the Victorinox Swiss Card scissors. These Scissors are meant to go into a SwissCard but you can buy the scissors alone (as a ‘replacement’) and they make a really effective Ultralight Backpacking…
Introduction This is a 6mm (1/4 inch) hex-bit driver I made for my 91mm Victorinox SAK. It will only work with 91mm Victorinox knives, but I also made one for 111mm knives. I tried to make it as durable and universal as possible, and it…
This is a remix of the bollio's original model on thingiverse . I have added some cutouts to improve airflow. The original auther stated that this baffle was for the Mellanox ConnectX-3 CX312A. But I have a CX322A, and it works just fine.…
Easy to print sheath for Victorinox Fillet knife
Multi-color print that uses the pause at height function of PrusaSlicer!
If someone could manage to make this stronger, my pin keeps breaking.
I wanted to install a 40mm fan on my M920q to help cool the SFP+ Mellanox card I had laying around. So I modified the ITGear Top vented case design they uploaded to Printables. V1 Is as per my photo. V2 is slight adjusted and should have…
they are thicker than the orginal scales but you can scale them down if you want.
Remixed Citrusper's design for the larger heat sink of the MCX512A-ACAT. Recommend printing in high temp material. Design works great for me, but this was my first design in Fusion 360 so .f3d file is a mess. Thank you, Citruspers! ASIC…
Works with rambler, jet-setter, mini-champ or any 58mm with Philips. Print on an angle for best results. Takes a 5mm magnet to securely hold the larger bits. Edit: new files will not exactly match pictures
I added a bottom for tag125 if you want add amiibo
You should not need to turn on the support material setting in your slicer for any of these files. The Chassis file has two “print in place” support features included in the 3MF. Materials: 1x XRP Board 1x 9V battery 2x N20 motors 1x…
@TomHaynes_30709 created a nearly perfect replacement case for the swisscard. My case had broken so i printed his and everything fit perfectly, but the knife, pen and toothpick were just falling out. So i looked at the old case and there…
Since the community has nice models for just about every monster in the Gloomhaven bestiary, I decided that it would be fun to do a gender-swapped characters project! So, I decided to start with the Inox Brute, mainly because Inox are rad…
This belt clip is inspired by this model , although I created the CAD model from scratch. Changes to the original: more space for the belt loop, add a closing mechanism that takes a piece of filament to stay secured. Use a lighter and…
Logos for Diablo, Lenox, Porter Cable and Skil. Slice with .20mm QUALITY or SPEED and you shouldn't have any problems. If you need help with inserting color changes into the slicer, let me know and I'll show you how to have PrusaSlicer do…
Using the https://www.printables.com/model/53253-parametric-kitchen-knife-sheath-improved-remix parametric file, I made a sheath for my Victorinox Santoku. Printed with the thin, non-curved side down in Prusament PLA. Fits well and…
Custom base for replacement of a Luminox Thermo (Lumilagro). PLA Printed. Not support. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: Generic PLA Notes: No notes…
I printed these in PETG with 4 walls. No support is needed.
This is a simple bracket that can be printed as a half-height bracket for single-port Mellanox ConnectX-2 PCI cards. This is a remix of rasarmg's “PCI Bracket Generator” on Thingiverse , and is only a very small addition to it. If you…
3d Version of inox guard from gloomhaven Please note that I made this model for myself, so it can be a bit trick to print
This is a compact countertop knife block to keep your Victorinox Fibrox 3.25" paring knvies organized. These are fantastic little knives, they are easily sharpened, take a keen edge, dishwasher safe and are dirt cheap to replace if you…
I made the Modell longer for : Victorinox "Tomato and table knife" 220mm Print in stl file orientation ! Printer : Flsun V400 Walls 4; top 10 ; bottom 10 layer height : 0,1 line width : 0,4 infill 25% ; no support ; print time ~ 1,5 h…
I printed this model on Prusa MK3+. Filament: PETG Infill: 50% Layers: 4 Printed with hole down (to the heatbed). No support needed.
Minox Film cassette and film specs reverse enginnering from orignal minox film see pdf for film specs
A disassembly jig to easily drill out the rivets on a flat surface. The cutout is for the corkscrew/phillips-screwdriver. Can be used on both sides, but depending on your nozzle and settings you might have to change the diameters on the…
I bought quite a few broken beyond repair minox 35's and decded to take a couple apart to attach them to a leica body. You need the tiny screws from the minox that hold the lens on. No guarantees.
IMPORTANT, THIS DESIGN IS NOT ALLOWED TO SELL! The case supplied with the Raynox 250 magnification macro lens is ridiculously large so I designed this simple yet effective rear cover and front lens cap. Print without support. After print,…
A 3D model bundle for NOX Knight as well as the three LORDs (3, 5, 6) The files contained are the helmets used by NOX knight as well as the (as of now) three Lord invoker users. The LORD helmets have thin guidelines for the painting…
Model główny został podzielony na 4 części w celu wydrukowania modelu na prusie mini+. Model został stworzony do zastosowania pasków neon led flex o rozmiarach 6x11.
Polecam drukować części pojedynczo w tej samej skali i posklejać pozdrawiam
Minox 35ML & GL 30mm filter adapter. This adapter replaces my old adapter: https://www.printables.com/model/173716-30-mm-filter_screw-to-push-on-adapter-for-minox-35 IMO, this one has a much better fit and also shows the distance scale.…
A quick print to make a low profile bracket for the inexpensive Mellanox Connect-X 10 gigabit Ethernet NICs.
When traveling I often worry I'll leave my SwissCard in my backpack etc and end up in trouble in an Airport. I could just remove the knife (or be more careful! :P) but then it would leave the hole open for dirt and grime. I designed this…
Please note - this bracket was designed specifically for the DELL version of the Mellanox ConnectX-4 NIC. Fits perfectly in the ThinkCentre M720q/920q/x, which is a common node in many home labs.
I shoot and home-develop a lot of different film formats, and after releasing a few different reels for lesser used formats (110, APS, disc, etc), I started getting approached by people wanting one of equal quality for the Minox 8x11…
EDIT: Check your knife before printing! Scale have holes for only three rivets. Fits Victorinox Recruit. Remixed from @ Punkelopment. I made these in Wood-filled PLA and fit is almost perfect. You might tweak it a little depending on…
Print with outward facing/flat side down. Includes three holes for M3 threaded inserts to secure the bracket to the NIC and the case of the M720q. But it should also hold reasonably well without threaded inserts by securing the bracket…
![Inox Guard [Gloomhaven]](https://media.printables.com/media/prints/500656/images/4070360_92b327a8-e3bf-42ab-9c23-7b8274c50d3a/inox-guard-front.png)
