679 modeli
This is based on the EVO 3 Sport and the mods developed during the 2023 summer season. There are improvements on front chassis printability (PC-Blend), play in steering, better servo saver and better side suspension. The previous…
Wydruk około 4,19 €–5,12 € nettoWstępna wycena jednego wariantu
I have been running my Robo3D R1+ somewhat reliably through Octo4A, an Android Port of Octoprint. I use an older secondhand LG-G6 Phone as the server device, and wanted a more permanent way to mount the device to the printer, while…
Wydruk około 4,11 €–5,03 € nettoWstępna wycena jednego wariantu
Since many of the new Chamberlin/LiftMaster garage door openers do not have removable light covers, including mine, I decided to make an enclosure to prevent any shorts and keep the PCB properly protected. This is an enclosure for the…
Companion project to my other parametric configurable FPV designs: Pod | O4 | Frame Whoop Action2 , 3-5 AcePro GoPro Mini Hero 9-12 Antenna Mount Protect your FPV camera with TPU in front of the lens for maximum protection but still with…
I like the phone holder, but the joints are bridges. Not anymore.
Companion project to my other parametric configurable FPV designs: O3 Pod O3 Frame Action2 , 3+4 AcePro GoPro Mini Hero 9-12 Antenna Mount Join my discord to request any custom version! Alternatively use telegram or printables-dm. New: O3…
Lens Mod Instructions Note If your adapter piece doesn't fit the jig, you might have the slightly different version that's more square. Thankfully, the ever helpful @Tokyo_Dom_663158 made an alternate version of the jig for those!…
07/17/2023: 0.6mm Nozzle First Layer Tips! Read below on how to get rid of those gaps/crevices in your first layer when using 0.6mm nozzles. The following was performed on the 0.2mm Layer Height Profile. Manually increase your z-probe…
Companion project to my other parametric configurable FPV designs: Pod | O4 | Frame Whoop Action2 , 3-5 AcePro GoPro Mini Hero 9-12 Antenna Mount Join my discord to request any custom version! New: O4 Pro support! All O4 versions are made…
Companion project to my other parametric configurable FPV designs: Pod | O4 | Frame Whoop Action2 , 3-5 AcePro GoPro Mini Hero 9-12 Antenna Mount Get your perfect antenna setup for your FPV drone. Mix-and-match from 80 frames, 50…
Hey there, I have created this model to upgrade my GPRC Mark 4 frame with the new DJI O3 air unit. I have made 2 Version: Version 1 with DJI O3, antenna and GPS mount: The bottom left and right part to hold the DJI O3 Air Unit in place.…
These are models to help design FPV frames and camera mounts for the DJI O3. Insert them in you drawings as a reference. Cheers Kisssys Category: R/C Vehicles
Didn't like the idea of removing screws to mount the O3 air unit into a tpu mount adapter so I designed this case for the unit to sit on, it has 20x20mm and 30x30mm mounting holes, a channel to run wires under and a couple of braces that…
Yet Another Stackable Storage Crate
Soporte con forma de muñeco para dispositivo Amazon Alexa Echo Dot 4
Update New V3 version is moved forward by 1mm vs V2, to avoid getting bits in the frame in view when mounted instead of an o3. I've made a v2 version that's a bit lighter, and that respects the hole-to-lens distance of the o3 for a more…
Superb Adjustable Phone Holder, originally made and distributed on SD card with Kywoo3D printers. You can scale it as you see fit, for example around 200 % should be enough for iPads. lower paws are wide enough to hold phones even with a…
I like alluminius cases for Orange SBCs, but the Zero3 is brand new and has no accessories. It will be as first case to just ordered Zero3. Hope I left enough place for coolers. Anyway, it is better to use with holes. Remember to post a…
Lens Mod Instructions
Support pour Airunit DJI O3 Il vous faudra 4 ecrous M2
Tempomat for Sowlow SO3 E-Scooter
I designed this to accomodate the O3 camera on the TBS Source One HD V5 frame, i added the slots to fit the silicone inserts from iFlight (https://shop.iflight-rc.com/DJI-O3-Camera-Silicone-Inserts-Pro1916?search=o3&page=2). I guess you…
Fits Pavo Pico O3 and 6 batteries. (Betafpv and Tattu 2S 450mAh) ! Added version (R4...) with smaller outside radius to enhance printability -Place Supports under the latch part of the Box, so supports needed elsewhere -Glue a small piece…
Vertical and Horizontal mount for Insta360 Go3. Used support for enforcers only. Enjoy! 8/20/23 UPDATE: Fixed bolt hole at bottom of vertical mount. Added new combo vertical/horizontal mount. Support for enforcers only.
Imprimé sur une Anicubic Vyper à partir de Cura. Hauteur de couche = 0,15mm Remplissage 100% Vitesse d'impression 60mm/s Support + structure de support Avec Bordure pour améliorer la fixation au plateau. Avec perçage pour toute les vis A…
I have recreated an improved version of the Original created by GEPRC for the o3 unit. This version is more aerodynamic, has a much larger and more precise airflow inlet, along with a small lower air passage that improves the cooling of…
I designed this part to fit my DJI O3 Air Unit. As you can see on the pictures the big ass box fits right behind the cam. I used double sided sandwich tape in-between to stick it to the upper frame part and secured it with a zip tie. I…
Created 6 new perks so it now includes all perks from WaW-BO3 Perks from @spencer_dubal_212303 remains unchanged. Thanks for your work mate. New perks added: Double Tap 2.0, Widows Wine, Who's Who, Vulture Aid, Tombstone and Electric…
Naked DJI O3 Air Unit Case Two version one is for M1.6 and the other M2.0 If you want to use M2 version, you need to drill the Vtx board and reaming to M2. We have test it, reaming it won't break the Vtx.
3 different versions : Claws : doesn't need glue to be fixed. Just take the time to set each claw with a thin tool. Basic : needs glue, simple cap with a bit of overlap at the base UltraBasic : needs glue, most basic cap possible
Printed with TPU no Supports (set Bridge Flow Ratio to 0.35)
Print with the front on the bottom of the print bed no supports are needed. Additional components are needed to complete the project which can be found on the teaandtechtime.com/an-analog-aerochrome-film-replacement/ blog post.
Print with the front on the bottom of the print bed no supports are needed. Additional components are needed to complete the project which can be found on the…
Funda para Samsung Galaxy A06 5G, mas archivo en Fusion 360 para seguir modificandola y mejorandola a gusto.... Y GRATIS
E3D V6 Bowden hotend mount dzino3D
Base con pies de pato para dispositivo Amazon Alexa Echo Dot 4/5 Duck Feets Amazon Alexa Echo Dot 4/5
Introducing our 3D Printable DJI O3 Air Unit Adapter – the perfect accessory for seamlessly integrating your DJI O3 Air Unit with drone frames featuring a 20mm hole pattern. Designed with precision and functionality in mind, this adapter…
I wanted to mount the HLGRC M100-5883 10th-gen GPS module to my GEPRC MK5D frame (Deadcat version). I could not find any mounts that use the stock antenna mounts, allowing for easy ELRS antenna and DJI O3 antenna fitting. Therefore I made…
Adapt your DJI O3 air unit to 20x20 mounting pattern. Print and add 2 knurled brass inserts (3mm) and two m1.6 screws to convert your air unit to 20x20. Knurled Inserts: https://amzn.to/3I3io7T M1.6x8mm bolt: https://amzn.to/3FZDtNU
Da das Schutzblech vom Soflow SO3 immer reißt habe ich ein eigenes gemacht. Einmal für den Prusa Mini und für größere Drucker. Den Haken habe ich aus TPU gedruckt. Druck es mit 4 Konturen Since the fender of the Soflow SO3 always tears, I…
Print in TPU, use OEM Screws
New version is lighter and thinner. Weighs 3g. Weighs 5.5g as opposed to the 2.75g of the original guard. It can be fastened with the DJI AU fasteners or it also has a capture design that should hold it fairly well without the hardware.…
Little mount to combine Pavo 30 drone and gopro. Printed from Flexfill 98
There are 2 parts to mount the DJI O3 Air Unit (O3 Mount Bottom & O3 Mount Top). Those are stacked on each other with the Air Unit in between (like a sandwich :D). The cables to connect the Air Unit to the flight controller are laying…
Also works for the original DJI FPV System camera using the standard 2 mounting holes on each side. Front holes are for mounting O3 Cam, they'll push it all the way to the front, almost touching the titanium cage but getting 99.99% of it…
Designed to use M2 screws to attach to the frame. To attach to the O3 Air Unit, I used the cross-head screws that come installed in the Air Unit. I used 95A SainSmart TPU, 100% infill, supports enabled for the O3 Mount but not the Antenna…
Brought to you by Magic Aerials, the provided 3D printed parts are lightweight TPU inserts designed for the Pavo20 drone's front quadtriangular section. These inserts offer several benefits: A clear camera view without visible propellers,…
I designed this TPU protector for the Happymodel Mobula8 O3 since I kept breaking ND and UV filters with the whole camera assembly completely exposed. This design not only helps protect your camera lens but also helps protect both…
I broke my Air65 canopy and didn't want to wait for shipping of a new one. I've seen a similar model to this one on the internet for other cameras, and I couldn't find a light weight canopy for the betafpv CO3 camera that I could use, so…
Replacement Part for the PTFE Tube in the Raise3D Pro3 Extruder. The original part has a relatively big gap between extruder wheels and PTFE Tube. In combination with the soft PTFE Material it gets deformed easily and soft Filaments like…
I found that my phone got quite warm charging in the wireless charging tray of the BYD Atto3. This is just a problem with wireless chargers in general, but because of the location of it in the car I thought I could do something about it.…
We use this to wall mount tooling for our ZX45 mill at Stockholm Makerspace . You can use this for any kind of 30-taper tooling, and the bottom is open to accommodate different styles of pull studs if that is something you do have on your…
I designed it to tick all my boxes ;-) [x] Lightweight [x] Durable [x] Vibration-free (or as close as possible) [x] GPS compatible [x] Battery bottom mounted The proper tuning is ongoing and will probably be posted later on…
Water drainage. Mounting bracket. Suspension point for a fatball or other bird food. Bottom also suitable for placing food. Removable roof. 100% printable. No glue required, but can be used just to be sure See here also:…
Improved version of GoPro Hero3/4 Case Latch Replacement
For Slot based PCBs like AGP, PCIe, PCI, EISA, VLB, ISA see the normal slotholder.stl or SCAD file. For GIO32 (SGI) or SBUS (Sun) Cards see the GIO32 stl or SCAD file. For giving large x16 PCIe GFX Cards more hold use the “extension”…
If you're here, thank you for your personal dedication to repairability and E-sustainability. DJI designed their cameras to be thrown away if you crack your lens. They don't sell a replacement lens, a replacement camera is $110 and the…
Nanopi Neo3 case with heat-sink and 3010 5V fan . NanoPi Neo3 purchased from aliexpress {package 4). Printed on Creality K1 using ERYONE Filament ASA , Creality print settings: Layer height: 0.2mm Print temp.: 255°C Bed temp.: 100°C…
07.07 Orange PI Zero3 was released and i buy one) I made this on the base of https://www.thingiverse.com/thing:4904919 and with just photos but it looks very close. I hope that this model will help to design cases to this new SBC
35° antenna mount with 32mm post spacing, designed for the DJI O3 antenna and AOS5
FPV canopy for Volantex Ranger 2400 and Volantex Phoenix 2400. With 9g servo mount and designed to house DJI O3 air unit. It will also work with any other VTX since you can use zipties to mount VTX in place. This is a rough first version,…
Print with 100% infill to have it stable on desk. I noticed there are a million versions of this out there that might be slightly bigger/smaller. I recommend slicing the model and printing a segment to see if it fits.
Quadmula F5/DJI O3 "Shorty" Antenna Holder. You'll have to remove the black plastic “straw” completely from the O3 antenna. But it's not too hard to do, just pull & cut. 3mm shorter than the back standoffs so there is room for the…
Insta 360 go3s rugged box, this is different from go3 model(go3s lens is bigger). I have remix the following model: https://www.printables.com/model/528732-insta360-go-3-rugged-box and use the…
In my opinion, the height of the spacers was too small to accommodate the ESC and flight controller properly. So I increased the spacers by 10 mm and constructed my own bracket. I would be happy to receive comments and suggestions for…
I've searched for a battery case for my GoPro Hero 3 and couldn't find one, so I did my own version. It has place for 3 batteries and 10 microSD cards. Even though i don't have an MMU this can also be printed using one. I just printed the…
Simplistic low profile bracket to mount DJI O3 camera onto servo. I use it to mount camera on my panning servo. Allows adjustment of camera tilt angle. Print laying on its back.
Side shield to protect your FC. Only suitable for the pro version with the O3 aluminum fairing Printed in TPU small with supports Infill 100%
Bearing the mantle of the Titan of the Sun, the 'Helios' was designed with a singular vision: to provide a platform for an ultra-lightweight high thrust-to-weight ratio 3.5" DJI O3 FPV build. Harnessing the divine spirit of its namesake,…
Geprc Mark5 O3 + GPS MODULE for GOKU GM10 MINI V3 W/COMPASS
Frame for GoPro Hero3 Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 100 Infill: 20 Filament: . PETG Category: Camera
I bought a JBL GO3 Bluetooth speaker for my worktable to play music from my laptop while working. Did not want it to be sitting on the tabletop with all my tools, so I designed a bracket that I can use the 3M command tapes and mount to…
This lens was suggested to me by https://www.printables.com/@CarterNguyen_2425202 on the KayouFrames discord. Big thanks to them! I tried a number of lenses for the O4 “lite”, most of them have an extreme amount of fisheye or a lot of…
I designed a cam mount for the upgrade from the caddx nebula pro to the O3 air unit for the Flywoo Explorer Micro LR drone. Adjustable cam angle from 0 - 35° also added a reference indicator for a 25° cam angle. Print Settings: - Intented…
A GPS mount for the Speedybee Mario 5 frame and the GEPRC GEP-M10 GPS and the DJI O3 unit. It is best printed with PLA or PETG and you should have plastic glue to glue the two halves together, it should also be printed with support
See Krhom's tutorial for details (model: https://www.printables.com/model/1453671-dji-o4-o3-lens-mod-alignment-jig). This jig is modified to fit the other type of lens holder you might get in your Aliexpress lenses (I ordered from here…
Overview: Antenna & GPS Mount designed for the AOS 3.5 Frame. It was made to fit the DJI O3 Antenna and a micro GPS module, angled at 30° for optimal signal reception. Tested with Foxeer M10Q 120 and Newbeedrone M10Q Micro GPS modules.…
I made a DJI O3 kit for the GepRc mark 4 HD5, I can't find any good 3D printed that worked for me. I have modded/remixed every part so now its working perfect. No need to buy a longer camera cabel and stuffs. The DJI O3 holder is flipped…
Use 8x3mm Magnets: https://bit.ly/3I2yOgU Alveo3d Hepa Filter: https://bit.ly/3YLQNxM
This is not intended for printing, but as a reference to create mounts for the decased DJI O3 Camera. It's not a 100% detailed replica, but I think it should be close enough to be able to create some mounting solutions to print. I'm…
Stronghero3D and Geeetech 74-75 mm inner diameter spool adapter to 54 mm diameter I was using an existing spool adapter to 8mm rod, but these were too large for my existing adapters. This was a quick model to adapt. This is to be used in…
Print with TPU, no support needed. Everything gets better with coffee! https://ko-fi.com/pixbalance
The Delonghi Icona Vintage Eco311 has no possibility to store the supplied filters for 2 cups and pads and the piston has to stay in the machine. The coffee powder is better pressed with a loose tamper, which benefits the taste. Place the…
This is a 2 in one mount for your O3 Single Antenna and a spot to keep your elrs antenna in place! Print in TPU.
This is a DJI O3 Cam Mount for the ZOHD Dart250g. Print in PLA with no supports.
Remixed case for the Insta360 Go3s, made room for the larger camera lens of the 3s. This prevents accidental recordings.
A followup to my UL5 parts page, now for the new AOS LR5 O3 version! Also see my new O3 Camera Pod design ! Made to fix all the issues with mounting the DJI O3 Camera on your AOS frame (or many many others) It also offers dipole antenna…
The BYD Atto3's centre console cup holder is very deep. This is great if you need to put your Big Boy XXL Double Gulp cup in it, but not so great for ordinary cups. The car comes with a "riser" that can be put in one side, which allows…
I designed this canopy for Dronarchy so he could fly the DJI O3 in DLQFPV and MambaFPV ASBOX frame. Print in your favorite TPU. When you are ready to install the VTX just run some hot air over the Canopy to make it slightly more pliable…
This is a work in progress! Try at your own risk! I did not design this frame, kudos to Jayson Ragasajaysonragasa on thingiverse. I simply modified it a bit and added the o3 mount/canopy. This is an experiment I did because I had the…
I recommend removing antenna tube to keep some flex in the mount. Cap should be held in tightly enough using friction not to pop out and pull the cables out (thanks SyncFPV for help with this design), but I haven't been using it too long…
This adapter system wraps the edges of a DO3D 1kg 193x65mm cardboard spool in order to: provide smooth rotation within a Bambu Lab AMS prevent carboard debris from depositing within a Bambu Lab AMS Features: Reusable DO3D nameplate for…
Nothing fancy, just a simple replacement battery cover for a GoPro Hero3+ (may work for other models too, but I only had this Hero3+ I got as a gift to test with. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports:…
DJI O3 mount with 20x20 mounting, has slots for m3 nuts for securing to the drone frame
** Upon request I have updated my model to support the DJI O4 Air Unit Pro and created a separate file with just the camera mount and a modified rear antenna mount. I have not tested this mount on the frame but the O4 Camera/ND Protector…
This O3 Transmission Module Mount keeps all the great design features of the original mount that comes with the GEPRC Mark5 DC. I did fully build this model from the ground up, but largely reflected the general structure of the first…
TOOLHEAD SHROUD UPDATE:: After some positive feedback I've altered a few things slightly with a view to more tolerance for everyone. updates include: 1.top of tool head cover made larger to fit alterations you may have made to cable feed.…
Slides over standoffs, parts orientated, no supports needed. Supports O3 camera with loss of FOV.
Dieser Haken ist für den E-Scooter Soflow So3. Das Schutzblech hinten geht immer kaputt, weil man es runterdrücken muss, um den Lenker einhacken. Mit diesem Haken dürfte das nicht mehr passieren. Du kannst die zwei originalen Schrauben…
