122 modeli
I designed this model to squeeze a bit more performance out of the Thermalright AXP90-x47 CPU cooler in the FormD T1 v2 case. The duct prevents re-circulation and ingestion of hot air into the cooler and can provide some passive cooling…
Wydruk około 1,17 €–1,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The food processor does NOT work if the bottom of this piece is broken off, and mine keeps breaking off. So I modeled this up so that I could replace the original part. Works good enough in mine. Edit: Updated as the original bent into an…
Wydruk około 0,71 €–0,86 € nettoWstępna wycena jednego wariantu
Gibson made the SG Pro for 2 years, and the pickup and rings are a different size than a traditional P90, so they are literally unobtianium at this point. I acquired my 72 SG Pro and the brittle bakelite pickup rings were cracked (at…
Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu
Hello, Welcome to my profile, full of models and miniatures :-) I have for you Imitation of 5.7x28 cartridges for P90. The cartridges are made exactly according to the machine documentation, so they are fully authentic. I have 2 variants,…
Wydruk około 0,50 €–0,61 € nettoWstępna wycena jednego wariantu
A custom neck humbucker ring, designed to fit over a P90 cavity. Screw sizes are standard.
Wydruk około 0,72 €–0,88 € nettoWstępna wycena jednego wariantu
3 variants available: [wPlate] => Get SSR90 size with rubber butt cover ( Cover from AirsoftPro ) [Nature] => Get SSR90 size without the additional cover, provide bigger space [eone_remix] => Same sizes as enone version, just rounded…
Wydruk około 1,03 €–1,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
reuploaded because the other link broke.
I designed this conversion adapter to mount a 120mm fan I had on hand because I didn't like the appearance of the stock fan included with the AXP90-X47. Required other than printed parts: 4x M3x5x4mm heat-set Inserts 4x M3 screws,…
Comes with detailed assembly instructions and is easy to print. Have fun! Juri
Helps to prevent hot air from recirculating into the CPU cooler fan. The internal chamber of my case get very hot, even with a 120mm exhaust fan installed. On my Terra, it reduces CPU temperatures by upwards of 13C. Before installing this…
The purpose of a Dogear Shim is to help raise the pickup to its ideal height. Since Dogears are Fixed-height pickups, this is the only way to get around it. Model dimensions for x and y axis are set, you need to adjust the z size to suit…
I contacted the Maker of the Model STP9000 and asked to edit it for SC2020. Thanks for your permission chilluniverse@chilluniverse ! Remix for Holder Sepura SC2020 with Speaker. Happy printing! #STP9000 #STP9038 #SC2020
P90 and FS2000 parts Printing: All parts should be printed solid. PLA will not work for anything other than the selector switch. Nylon is the recommended material. You need to use a strong impact resistant material. Stay away from carbon…
Mag works and holosight slides on. Made for Lego figures or other figures with small enough clip hands. Print Settings Printer Brand: Creality Printer: Ender 3 Resolution: 200 Infill: 50 Filament: PolyMaker PETG/PLA/ABS Literally anything…
This is a printable version of the standard cheek riser to fit the Snowpeak AP900/ Air Venturi Alpha PCP. The factory hardware is used, so just print in your favourite filament and change up the appearance of your PCP! The model is…
Removed text and arrow from original ( https://www.thingiverse.com/thing:2773868 )
This is a printable version of the standard AP900/ Air Venturi Alpha forend/ fore grip. The M Lok is functional and the location for the standard magnet to secure the folded stock is included. Additional reinforcement is included that…
I recently bought a second hand Canon Selphy CP900 Photo printer, but it came without a paper cassette. Looking on Ebay revealed that if I could find one it would cost more than i paid for the printer! I couldn't find one on Thingiverse ,…
Źródło oznaczyło ten model jako treść 18+.
P90 upper receiver. Uses all original parts and works like the factory receiver. Main difference is plastic vs metal weight. I printed it in PLA and works just fine. Survived 3 games already and there are no signs of degradation. If you…
Printable pickup cover for a Fender "Soapbar" pickup, essentially a P90 pickup like Gibson would make. Modeled from scratch however I used the linked adapter as a sanity check that everything should be in the right place. Depending on…
Liteweight remixed version with zero gap between radiator and fan body, 25mm fans support in 3 slot mode, precise strong mount, support Corsair Venegance memory sticks and similar height even with shift brackets for AM5
A custom extended skeletonized stock for Airsoft P90s! This is a work in progress. Feel free to download and edit the Fusion 360 file (if you don't mind getting a look at the jank behind the scenes lol). The P90 reference body there is…
Printer: FDM Material: PLA Layerhight: 0,3 Infill: 10% Walls: 3 Support: non Standard parts: DIN 934 - M4 - nuts 3x DIN EN ISO 4762 - M4 - screw 3x Fits for TM P90 midcap mags. May you have to scale the model for other brands.
The factory moderator on the AV Alpha was honestly not bad (better in my opinion than the Avenger for sure) but I can do better. The design uses cones to strip air from around the pellet, and bleed holes into an outer plenum to further…
This is a stock extension for PS90. This will not fit airsoft. The passthrough hole in the stock is for the sling (Stargate style). It has a hole inside for the part of the bolt that extends into the stock. Best printed with fuzzy skin.…
Parts needed for this install: Thermalright AXP90-X53 M3 S Threaded Inserts Mini Heatsink Kit M3 Button Head Screws
If you've misplaced the original metal fan clips, or if you want to mount a thicker fan, this bracket is for you. First, attach your fan of choice to the bracket with typical PC fan screws, and then the bracket clips to the cooler in the…
I made this in an attempt to organize my larger storage bins. This was tested with P90 mags made by 3 different manufacturers. Some will fit snugger than others.
I wanted a box to store the MPD-P906/MDP-M01 lab supply that had the same size & shape as my TS101's box. I couldn't quite get it the exact same shape, but the footprint is the same as the TS101 box. I made this to have a thin adhesive…
Stepper assembly (and original X joint) files now updated to the 1.1.6 version! This is a coreXY mod for the old Flyingbear P902 based on the ZeroG Mercury One.1 (R1.1.5). Most of the part are the same as the original design and you can…
Short Note: As with all other firearm replicas depending on your color choice this looks like a real firearm. Dont be an idiot. Always check local laws and regulations. Incorrect handling might get you harmed or worse! This model is based…
This insert for P90 hi-cap magazines prevents BBs from entering the feeding wheel in the wrong direction, which otherwise prevents proper feeding and causes the spring to unwind uncontrollably. Glue the insert to the location marked on…
Wanted to mount my P90 onto my wall as a decoration so made this up fits my we p90 (TA 2015) and may fit others though I'm not 100% sure I printed in PETG and with 70% infill
EDIT: You MUST print this in TPU as stated in the description. If another person reaches out to me on Reddit because they can't figure out how to put their PLA buffer on, I might lose it. Please, PLEASE, print in TPU. HOW TO PRINT 1) Have…
California compliant stock and forward grip blocks to make a P-90 compliant. The one in the pictures is a Ruger 10/22 in a High Tower Armory 10/22 P-90 stock kit. It should fit on an actual FN P90/PS90. (rimfires aren't considered an AW…
UPDATED 1/12/2026 - Included bracket for the MSI B850 Edge TI board (uses coarse fan screws) UPDATED 1/11/2026 - STL file updated to 5.5mm offset instead of 3mm downward - Fusion file updated to have parametric adjustment for vertical and…
Mag holder I designed years ago for my airsoft P90 mags. Connects to a belt. Mag slides in and out easy. Also added the STEP file for anyone looking to change my design up a bit.
CMEE P90 Trigger v2.0 The trigger is a replacement for the standard crappy P90 electro-mechanical trigger of Cyma, Cybergun, Classic Army, Tokyo Marui and similar AEG airsoft replicas. It improves trigger response and the feel of the…
This is a Mount designed to interface with the optics mounting screws on an FN P90/PS90, The mount is compatible with all Surefire Pro Series light bodies (the ones with the hinge mount) Using OEM Hardware Please Note that as this is a…
P90 CS2 charm, designed to add it to yours bag/keys based on the gun model from game Counter-Strike 2 Remember to scale it up before print!
I printed this P90 pickup router template in PLA using extra walls to reinforce the area where the router bearing wil ride. I use double sided tape to attach the template to guitar body while routing the opening.
Sometimes, on cheaper guitars especially, the pickups are way too low and that impacts the sound quality of the guitar. These shims raise the height of P90s. They go between the pickups and the body of the guitar. 2.5mm Tall, you can…
V2 is a stronger version with 4 slots instead of 2 large ones. It can also be printed without supports.
Krytac P90 Side picatinny rail. in thre different versions: Cilinder head, Sunken head and button head screws. Walls: I suggest at least 4 Infill: anything over 20%
Remixed Grip for Picatinnyrail Category: Props
Here's my P90 conversion for a Rival Charger! I've seen a few concepts and other similar bodges, but I figured I'd take some time to sit down and work it all out. It's mag-fed and full-auto, with 95% drop-in 3D printed parts. Most of it…
TL:DR; Replaces all the internals of the top portion of the Hamilton Beach food processor so that I can push the button down to run the device. The Hamilton Beach 12 cup (Model 70728) food processor has a very complex mechanism to make it…
P90 TOP PICANTINI RAIL - HOLLOWGRAPHIC RETICLE REPLACEMENT DESIGNED TO FIT WITH CLASSIC ARMY CA90
Holds up to 4 p90 magazines
This is the current design, It is still a work in progress. It should have no issues with clearance on the Y-axis bar or the pulley that drives it. Mounted on the printer using hardware that came with the printer. It is designed to work…
A relatively simple P90 style handguard with a rail piece in the front and M-lok on the sides Re-upload of my design on thingiverse, since I prefer Printables
Foregrip created with the p90 grip. Like the one worker sells. You don't need supports on the inside and print it in the orientation it's in right now.
there are a view different models of these 5.56 Magazine pouch out there from emersongear (single, dual, single + pistol pouch) this insert should fit in them both. with this insert you can easily clamp down the mag in the pouch and…
This is a two piece, parametric, double airsoft P90 magazine coupler. Pictured on airsoft P90 magazines (Cyma low-caps), printed out of PETG. Bill of materials M3 nut, optionally a locknut M3x60 Printing and assembly instructions The fits…
AV Alpha is a great entry PCP rifle, with the exception of the goofy fill port arrangement. A small removable port that's easy to lose or get damaged. This is a slightly elevated (for my son's optics and posture) and extended cheek rest…
Some spacers are skewed below 1° angle for tone optimalization.
Tip: If you are experiencing trigger binding, print this slightly wider, or sand down the inside of the rails directly above the trigger. WE-Tech / Cybergun frames will bind up if you squeeze the plastic above the trigger.
A small and simple fan duct for the X47 cooler from thermalright. made for the S300 case (i.e. Shiny snake S300 and the other names the case is sold under). Slots in tight on the cooling fan and makes it so that hot air doesn't…
Hello, Today I have for you Airsoft P90 hop up parts ideal for the PRO WIN chamber, where these parts are missing. The parts fit nicely and the assembled chamber works well. I used ASA/PETG as the material. No need to use supports If you…
To begin with, I frankly do not like the regular silencer on the P90. Therefore, I took the one I liked from the pistols, honestly, I could not find its name, so I looked for a rectangular silencer by description. I made it in the Compass…
Raspberry Pi Camera Mount on: Ender 3/ 3 pro axis gantry Flyingbear p905 stepper
The AP900 is amazing all around BUT I cant stand the refill process, you either leave the probe in the port which looks terrible , or you insert and pull it out every time you need to refill it and most likely loose it placing it aside. I…
A funnel for easier filling up of P90 (and similar) hi-cap magazines with 6mm BBs. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.25 Category: Toy & Game Accessories
This Thing can be used to install a servo for adding an opto probe to your printer. http://www.thingiverse.com/thing:263180 Category: 3D Printer Parts
Update 14/03/2020 : Added a slightly modified version as an alternative and a version more like the original from AA. Cheek piece for FTP900 or any air rifle in general. Print it as in screenshot upside down for better results. Print…
Angle base for the AwithZ P90C/ P120D, keeps leads closer to work, and makes it much easier to see the screen and access settings. Based on a similar model from diy500amp.com Included is a 25degree angle (my preference), fusion360 design…
i using this spacer with M3x20mm fanhead screw
Brother P900W Auffangschale, auf 2 Teile geschnitten + Einsatz
sight with + for precise targeting
A very easy adapter to use a 120mm fan on the AXP90-x47 in the FormD T1 V1.1 case that mounts to the case instead of the cooler. It is important that the fan sits directly on the cooler. I had to remove some decorative shrouds to fit the…
do you like to the Idea of placing a airsoft P90 mag in the UNW P90 platform? for something like the UNW P90 Etha 1 would this just be a mag for display purpose only. but with the EMG100 version is it possible to lock the small plug in…
I was experiencing some feeding issues with my PS90 with a CMMG barrel. The feed lip on the chamber was very sharp and was causing damage to the brass, bullet setback, and failures to feed. This tool is meant to be used with lapping…
This is the full amalgamation of all of my HC Vesper parts for all your P90 needs. The stock uses two 94180A333 heat inserts along with 2x 15mm M3 screws, and the locking key piece may need to be reprinted a couple times or so with…
3D printable insert to support P90 pickups in a Gibson LP Can be used with 3-48 screws or the more common wood screws Glues in with double sided tape or hot glue so removing wont damage the guitar Update 17Jan 2020 Added a version (SM) to…
Wandhalterung für 9 mm Pistole (z.B. HK P90) +1 Magazin. Rechts oder Linksmontage. Gerne passe ich die Halterung auch für eure Waffen an. Einfach eine Nachrict schreiben. Bambulab P1S Wall mount for 9 mm pistol (e.g. HK P90) +1 magazine.…
This is a QD mount for a sling on an airsoft p90. Materials used: 2x 40mm m3 screws 2x m3 heat set threaded inserts Metal QD mount (example image provided Recommended settings: 0.2mm layer size 55% cubic infill wall ordering, outside to…
When storing a Sepura STP9000 on it's side it eventually will fall over due to the battery weight. To solve this “problem” I design this little “stand” to support the radio and prevent it falling over.
This is a modification of a model by Greyman . This version contains one flat side for builds which need more clearance above the CPU fan. See the original model for more details.
this was originally made as a spring compression tool for the UNW P90mag. but I later moved on to a different mechanism were you wind up the spring. and I kinda put is a side as a “failed” thing. but then I run into the thing what if your…
Système de harnais permettant de porter un P90 au centre du torse, comme dans la série Stargate. Pour la fabrication, privilégiez des matériaux résistants tels que le PETG ou l’ABS, plutôt que du PLA standard, afin d’assurer une meilleure…
made for Densium 4 v2 plus case
Would recommend printing in PETG as it will get hot and warp otherwise.
Hark! Weary traveler! Sit a spell and allow me to regale you with the tale of embarkation to luthiering a hurdy gurdy using the quite remarkable bit of engineering dropped by demagnetized and subsequent mods by dablob, and how I've made…
Made to work with Ludex m4 and m16 speed loader, but should also work with Oden M12. (hasn't been tested so lmk any improvements to make. I don't have either of the speed loaders on hand atm) Ludex m4 mag speed loader Oden Sidewinder m4…
These spacers close the gap between the cooler bracket (CPU side) and the mainboard. Without them, there is risk in flexing/cracking the board if over tightened. Designed for a ASRock Rack 1151 ITX board, these may or may not be the right…
A smaller hand rest for Air Arms FTP900. Category: Sport & Outdoors
It's my first design I have published, so please tell me if I'm doing anything wrong, regarding doing it here. I've ordered a prusa mk4 but curently I'm using a Ender 3 S1 pro.
I was sick and tired of using a screwriver that didn't fit the Krytac P90 when changing the spring. So I designed a simple tool to do the job. Resolution: 0.20 Infill: 60 Notes: use enough walls to make the tip solid
i make a replacement part for the lock mechanism of the p90 airsoft replica upper receiver. It's like the original one so you need two little spring
THIS WILL NOT WORK WITH MARLIN RC7: http://www.thingiverse.com/thing:1859628 Fanduct for Flyingbear p902 with Inductive Proximity Sensor holder. Follow this project on Facebook: https://www.facebook.com/groups/1686034445059591 Print…
My ram was a bit taller than an x47 and i couldnt mount a normal 120mm fan adapter. So, i made this thing. It rises the fan about 6mm essentially making the whole thing as tall as an x53 allowing 4-5mm taller ram to be installed. Dont…
Print in TPU, simply clips on your Picatinny rail and slides over the fill probe protecting it from dust and debris from entering the fill probe.
kenwood knobs air fryer hfp90
Simple replacement part for the Airsoft Only (tested on Cyma) P90 charge handle.
My brother also have a P90 and really liked the Novritsch solution, we ordered a set from the SSR90 QD point, but it's counter part not included in the package: SSR90 QD Points – Novritsch | Airsoft Print it from heat resistant and…
A lightweight barrel clamp for FTP900. If you have a free float conversion with carbon shroud this barrel clamp can be used instead of the factory one. The design does not touch the barrel but has 1mm clearance around the shroud, its just…
Box inlay to store manipulation training ammunition. 6 x GP11 and 6 x GP90
De Tomaso P900 as a 3D Model. This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as decoration. Category: Signs & Logos
