225 modeli
Zesilující stojan pro mobily. Výrazné zesílení zvuku, viz video. Odzkoušeny telefony s celkovou tloušťkou včetně krytu 8.5 - 9.5mm a šířkou do 79mm. Vejde se i na Prusa MINI, jen je ho třeba pootočit o 45°. Doporučené tiskové nastavení:…
Wydruk około 15,37 €–18,79 € nettoWstępna wycena jednego wariantu
I print the one that is used with the SolidSuit with an adaptive layer height from 0.12 to 0.2mm to save approx. 2h (compared to a full 0.12mm layer height). I only print the stand for smartphone with RhinoShield SolidSuit because I never…
Wydruk około 7,14 €–8,73 € nettoWstępna wycena jednego wariantu
I printed the brackets with glow in the dark PLA filament so my daughter can see the ladder steps better at night. Each of the brackets is pushed onto the ladder rung from the front and rear and screwed on with two screws. One of the…
Wydruk około 1,69 €–2,07 € nettoWstępna wycena jednego wariantu
This is a remixed Raspberry Pi 4 mount made to fit the Passive Aluminium Case Mount for Original Prusa Enclosure. I have designed the raspberry pi can be removed from the top with ease. Also I have added windows to vent out the heatsink…
Wydruk około 4,20 €–5,13 € nettoWstępna wycena jednego wariantu
Upgrade your mobile audio experience with this compact, passive sound amplifier. This device requires no batteries or external power ; simply place your CMF Phone on the stand (or fast it with the dedicated screws) to enjoy amplified…
Wydruk około 1,81 €–2,21 € nettoWstępna wycena jednego wariantu
(English description below) Der Filamenttrocker dient zur Lagerung von Filamentspulen. Er wird nach dem Befüllen mit Silicagel in das Kernloch der Filamentspule eingelegt. Das Hygrometer zeigt den aktuellen Feuchtigkeitsgrad in der Box…
Wydruk około 2,71 €–3,32 € nettoWstępna wycena jednego wariantu
IMX 290 ASTROIMAGING CUSTOM PASSIVE COOLED CAMERA BODY has a slit style intake for passive cooling.
Wydruk około 1,52 €–1,86 € nettoWstępna wycena jednego wariantu
Helps to amplify/redirect sound from phones with bottom-facing speakers. Edit: Updating dB stuff with new measurements and correct maths Increase is around 8-9dB for the intro to the song “Smokin'” by Boston played on my P20pro from…
Acoustic Horn - Passive Smartphone Amplifier I designed this passive amplifier to merge pure acoustic physics with a clean, functional aesthetic. The core engine is a precise 45-degree acoustic bounce that catches your phone's…
A cool looking phone stand with a passive speaker! This stand amplifies the volume of your phone speaker. It is also possible to charge your phone while listening to some tunes! The socket is slightly angled, so you can use your phone…
Notice! This is only compatible with Python for the original AMS. Please view my other designs for designs supporting other AMS systems, there are plenty. Buy Python I've teamed up with a few different stores around the world offering the…
Passive Phone-Horn...suitable for an iPhone 11 Pro with case or others. Can be scaled. passive_iphone_horn_ver1: horn in round shape passive_iphone_horn_ver2: horn in square shape The sound quality is - as expected - mediocre, but at…
Does work, mobile speaker needs to point downwards into the slot. Scale/modify model to fit your phone, as is, it fits a Google Pixel 9, Pixel 6a & Asus Zenfone 3, slot is 77x10mm. Added supports at the back for better stability. You…
Some say the sound of the new Pico 4 is great with good bass, some say it's rather poor like me. Different opinions it seems, but the biggest difference could be due to different head- and earshapes. The sound-exit of the Pico 4 is too…
I made a nice Phone Amplifier Passive Speaker Bottom 204.29 x 165.83 x 35 mm Top 215.29 x 176.83 x 15 mm Horn 111.35 x 111.35 x 131 mm Phone Hole 80 x 15 mm
We all have that one co-worker who treats the sink at work like it's their sink at home and lets their dirty dishes sit in or around the sink for their spouse to clean. The only problem with that is if that spouse doesn't work where you…
This is a remix from thing https://www.thingiverse.com/thing:1930492 I remixed it to fit my Galaxy S20 with a case on. It also fits an iPhone XS with a case on. The phone gap is now approx. 81mm x 13mm. It works really well. Print…
The Gears and Spacers should be printed in high detail (recommend 0.1mm layer height). The Feeder can be printed in 0.2mm or 0.3mm layer height. No supports are needed, but I highly recommend printing with a very large brim to keep the…
I remixed the model, made by Leynad Jee and John Doe, slightly modifying the angle of the part in contact to get even closer. I also provided it already doubled mirrored and oriented ready to print. a brim might be necessary
This is a remix of gexgecko's amp. This allows for the cones to be printed in a second colour and glued on. Main reason to do this though is to experiment with different size cones - I haven't had time to do this yet, but plan to make a…
This is a remix of Jazzychad's passive drag feeder design updated to work with the LumenPnP V3. V3 changed the nozzle's z-height which makes it no longer able to reach the previous model's tape. This remix uses a spare 2020 aluminum…
Base design, new model. The original was a great starting point and I liked the design so I thought I would recreate it and tweak it a smidge. Designed in Solidworks
Altavoz amplificador pasivo para el smartphone. ACTUALIZACIÓN! V2 V1: Con soporte para estantería. SALIDA + CODO + BASE MOVIL GRANDE (O PEQUEÑO) V2: Modelo simple, sin soporte para armario. SALIDA + CODO v2 ¡Ninguna pieza necesita…
Just a passive–aggressive bear
Created a spool adapter for my Sunlu spools using the SCAD file located in the downloads.
A simple but effective way to cool your extruder motor. Mine peaked at 85°C and I was looking for a way to cool it. I didn't have problems but read around the internet that this can cause jamming since the gears can get hot causing PLA to…
🎯 Keep an eye on your filament — the smart, simple way! The Passive Filament Tracker is a purely mechanical tool that visually shows the estimated filament used and the remaining amount on your spool. No wires, no batteries — just mount…
The two colors main body in the photos is not part of the model… I ran out of filament mid-print, still, I think it looks cool if you wish to do it on purpose. You will need 10 M3 screws of any lenght (glue will also do). This is a remix…
UPDATE: I edited the cover model (v2) for improved screw fitment. Increased the chamfer to better recess a common M3 x 8mm flat head. Using this model (purchased from local hardware, not Amazon) in the new image uploaded……
Remix of the by Beer Tap Handle with Passive NFC E Ink Display @kgme. Shortened it slightly but functionally it is exactly the same. Specifically this is the chamfered version.
Es una base para apoyar el celular con capacidad de amplificar el sonido de forma pasiva: sin electrónica. Cuenta con orificio para colocar cable de carga. Se sugiere uso de soportes para la base. Relleno entre 5% y 15%
I originally printed the horns and the base separate for optimal quality on the bells of the horns, and the inclusion of a stripe. While the shorter horns do not project as far as the original, longer, horn did, the addition of the second…
The iPhone 16 Pro (and I'd predict more than a few others) has audio coming out from the top and bottom of the phone. Most of the “speaker” models I've seen only utilize the bottom speakers for audio. This model allows for “near” stereo…
I found a model similar to this, but the fitment was poor, it could wiggle into direct contact with the heat-block because the clips were very misized for the geometry present.. So I remade my own from scratch, with as reasonably precise…
This design has worked well in some testing, but has not been fully vetted! Your mileage may vary across tape types and thicknesses.
A base of the smartphone stand a passive amplifier shape is used, connected directly under the mono speaker of a Xperia XA2. The Xperia XA2 used a single speaker, so the amplified sound is mono. The three parts are glued together to from…
Hey hello. Made a version of a backcover for usage of the original RaspberryPi passive cooler. Update: added Version for Hackergadgets CM Carrier Board. What to print: 1x backcover choosen by board Back.stl is for stock ClockworkPi…
Based off the grill system style of @DylanKirby_2875644, designed to work with these passive radiators that have a 90mm OD and 85mmx85mm bolt spacing: https://a.co/d/8TZ2zYL Jig locates on the case ribs to provide drill locations and a…
A nice scenic object in steampunk style but also functional, just insert your phone inside the slot (available in 3 variants: 10x76, 12x82 and 14x90mm) and just like steam, the sound will pass through the tubes and come out. Print and sound
Die meisten Handys liefern einen Stereosound. Mein Passivverstärker unterstützt diese Soundausgabe. Mann hört sehr gut den Stereosound. Viel Spass damit. Most cell phones deliver stereo sound. My passive amplifier supports this sound…
Additional Material: 4 x M3 black hex brass spacer screws for the feed Notes I included the source file The pictures from the finished print are unprocessed, no sanding - nothing. Pictures are very bad quality since it is hard to make a…
I wanted to clean up my desk and replace my huge speaker boxes with stylish and tiny new ones. After gathering a few impressions from other projects, I started to design this tiny spherical speaker box for my desk. The design (size,…
This is a functional and modern looking hydroponic vase which can be used for passive hydroponic methods such as Kratky's (or non-circulating/ passive hydroponic). I designed this vase to be fast to print and leak-proof right out of the…
Rugged storage and transport case with custom insert for four INDX passive tools. Requires 6x Screws (25mm, or resized in Fusion360) Fusion360 File Attached
Some essential uploaded parts of the original design by Neds3D were corrupted and so not printable. Because it was not possible to get support or help by the designer I had to make these parts new by myself from scratch. The…
Small passive amplifier for phones. use 20% infill and 3 wall lines for best result
This one-of-a-kind passive amplifier can instantly boost the volume of audio on your phone, with NO POWER SOURCE!!! Seamlessly insert your phone into the aperture and hear as the sound increase by 10's of decibels. This model can be…
Passive speaker - folded horn - for Iphone5/6 i made this to fit my Iphone5s with cover. Inspired by Fab_ster, design in Dec 11, 2015: https://www.thingiverse.com/thing:1191352 Opened he's design in Cura for printing, the printing time…
i add a Cable clip on the Enhancer, so that the extra clip isn't nessassary, it s for the left side or if you looking fo
UPDATE: You should go with this multi-material version instead: This is an experimental 80mm passive radiator , designed to enhance bass response in small DIY speaker enclosures. I printed in TPU , and added the option for a M6 screw as…
First, check out the video! ※下に日本語でも書いてます。 All parts can be printed without support. 1. Assemble the three parts (WakingBody.stl, RightLeg.stl, LeftLeg.stl) with a piece of filament. The one with the "F" stamped on the body is the front,…
This is a passive stabilizer for cameras. It was made mostly to make smooth stable video. Most parts are printed in petg at 0.20mm. The stabilizer model is printed in pla at 0.15mm this is for a little extra give. If the dove tails don't…
This is my attempt at creating an all-in-one dock that can hold my phone out of harms way while boosting the audio. I designed this stand specifically for use in my shower where placement and the acustics of the environment made bringing…
Based on the design by Drew_B and using the dummy Rpi4 model by Olvin, I created this Raspberry PI 4 case to attach it to my Ender 3 v2 sides. It is designed to have minimal impact to air flow obstructing the massive aluminium heatsink,…
A few years ago I made a small, poorly made box for a Tang Band W5-1138SMF 5 1/4" subwoofer plus two 6 1/2" radiators. It worked and sounded alright but now that I have developed better CAD skills and understand the modifications I wanted…
So if you own the Tormach PCNC 440 and the TTS passive probe, you know it's kind of a pain to hookup/disconnect between uses. Since it plugs in you have a cord from the back right of the enclosure to your probe making it very awkward to…
intended for laying on a surface, it is necessary to replace M3 screws with M3 cylindrical head - thread length 20mm printing recommendations: - PETG - 3 vertical perimeters - print without supports - infill 20%
Here's a 6x12 passive wall register I designed and printed while adding some ventilation to the 2nd floor. For a passive register PLA will work fine. If you would like to use this as an active vent register i would suggest using PETG as…
NOTE: It is important that you print this with NO SUPPORTS, since I expect they will be impossible to remove from the speaker cone. The model comes pre-built with adequate permanent supports. This is actually from-scratch, but the…
Here is the link to the original case, where you can download the bottom part: Rock 5B Case
Simple wall mount for passive aluminum cases for the Raspberry Pi sold under various names (Miuzei, Geekworm, iUniker, etc.) Attention: check the height of your case, my versions for a Pi 3B+ and Pi 4 were slightly different, uploads are…
Passive cooling upgrade for the non-pro Ender 3's power supply. I have made it a year back, and have been using it since, without overheting, in an open enviroment witohout much draft. I did many 12+ hour prints without any problems,…
Stan for DIY speakers. You can order the kit to build such speakers here: https://www.soundimports.eu/en/300-7148.html
A snap-in clip to hold down the Leadscrew in place while enjoying your Spool Winding.:D
Remix of gexgecko's Passive Speaker/Amplifier with a flat back so it can be attached to a wall with Command Strips
Introducing our 360 Degree Passive Sound Amplifier, meticulously designed to enhance your music experience for parties, gatherings, or any event. This innovative amplifier provides immersive sound amplification in all directions, creating…
I have always struggled hearing sound from the down firing speakers on our flat screen tv. These reflectors help people sitting a distance away from the tv hear the full range of sound direct from the speakers. They attach to the bottom…
Design inspired from Maxxbox (Asus). Supports Portrait and Landscape Orientation. Tested with Asus Zenfone Max Pro M1 and Mi A1. Won't mind adding support for larger phones if this thing gets enough response. Print Parameters Print with…
Based on great design from https://www.thingiverse.com/thing:3723481 Changed round holes pattern on the sides to lines as these are easier to print and I find them nicer Increased screw hole holder height so very small screws can be used…
This little guy can hold some indoor our outdoor plants in his head! Like the picture, I think it'd be best to use a succulent type but, any plant that fits works… Just remember it'll basically be its hair so be mindful lol. I recommend…
just a simple holder for activated charcoal pellets. great for closed smelly areas(shoe closets, fridge) you can adjust the fill ratio for smaller pellets g-code is designed to make 2 of them so if you want to make only one, please use…
Created a spool adapter for my Jayo spools using the SCAD file located in the downloads.
A 3D model of a passive stabilizer, which operates without electronics, represents a mechanical system designed to maintain stability through physical means. Such models are often used in engineering and physics to study the behavior of…
Tested on a galaxy s10 e, but should work with any phone with the speaker on the bottom right of the phone. Category: Mobile Phone
This is a remix (from Thingiverse, see below). I wasn't able to print it on my Mini+ so I redesigned the base into 2 pieces that snaps together without glue or screws and it works really well. I also redesigned the front roller (the…
A passive-aggressive sign I came up with to gift a very good friend of mine. I don't have a MMU/AMS, so I pause at layer 26 (when doing 0.2mm LH) and manually change filament for contrast Update: V2 variant, self standing, should be…
se imprimio en anguo 30 grados y se levanto en z 1mm, devido a las paredes internas . sin soportes y aderencia a la cama de falda
Material - PETG Layer Height 0.2 mm Infill 15% Perimeters / Walls 2 Supports - not needed M3 countersunk screws 6 pcs Length 9–12 mm, countersunk head M3 nuts 5 pcs Wrench size 5.5 mm (standard M3 nut) PTFE tube 1 pc Any length, inner…
Passive CO2 diffuser bell for use with low-pressure DIY CO2 generators. I have used these for years successfully when you just need a bit more co2 than the atmosphere provides. Printed with PETG, .3mm layers, no supports necessary. Once…
UDPATE: I wanted to improve on this further but hit a wall (i had already tried 12-15 concepts) and decided in the end to design a hopper. If you want to give this a shot obviously feel free but if you want to go all in, check out the…
Not much more to say really.
Intended to be a Slip-Fit adapter for both the fan housing and GPU sleeve. You will need to make modifications based on the model of GPU and type of 40mm fan. Suggested modifications are access to GPU Power, resizing GPU and Fan…
I saw a few designs out there already for this, but they were all too weak or had bad stress points. This is built to be easily zip-tied to a steel angle bar which you can then mount to whatever you are affixing this to. One optional…
This is passive sound amplifer for asus zenfone, just a replcaement of stock cardboard amplifier. Print it on sides to use no support. Category: 3D Printing
I designed these 3x6 passive wall registers to add a decorative touch to any passive wall vent. I printed these in PLA and they're pretty sturdy but would only use these for passive holes that aren't exposed to heat or stress from being…
Currently this backcover works only with the stock CM carrier board. Hackergadgets board has a different CM position.
Tap handle to use with 2.7inch Passive NFC-Powered E-Paper Module: https://www.waveshare.com/2.7inch-nfc-powered-e-paper-module.htm For printing, I split the model at the transition, where the handle becomes broader (using Prusa Slicer…
Simple 92mm and 120mm fan mount for a unique ex-mining AMD RX 580 8GB 2048SP with a passive cooler and a single HDMI port. I could not find any info on this particular model but this card on AliExpress seems to be using the same cooler. I…
This soundbar is really useful and functional when you would turn up the volume of your phone without any electronic device. It can be printed well with Tree support (On building plate only) use PETG. 0.2, 3 Walls. Suitable for cups with…
Passive humidifier with 100 g/hr evaporation rate (based on the fan I chose). It can be also used as a passive humidifier without running the fan. Require parts: 120mm fan: (like this one:…
Sound Demos … Description Introducing the Open Speaker V4. A solidly performing speaker at an insanely budget price point. It boasts a life-like audio experience with high resolution sound from quality manufacturers like LG and SOTAMIA.…
Full Build Guide here on djbajablast.com I wanted a device like the Priezor LOM that is 3d printable, affordable, and most importantly, available (the LOM is out of stock) I print in PETG with a 0.6 nozzle, which takes ~70 minutes with my…
PETG 0.3mm 10% Infill Wandstärke von Innen- und Außenwand 1mm zwischen der Innen- und Außenwand ist eine Spirale für eine höhere Stabilität
A useful little tool for Synth DIY enthusiasts! This little box allows me to convert between the five types of connectors I use the most in my shop. License: CC-BY-NC-SA 4.0. I've been getting into building DIY synthesizers recently, and…
The best way to keep your filament dry without anything new! Open up those little desiccant packets and dump them into here to keep the surrounding area nice and dry.
I wanted to create an iPhone stand with flexible positioning, easy loading, assured alignment with my Qi charger, and passive amplification, all while looking good. How did I do? Note: This stand is designed for an iPhone 12 Pro in an…
I use small passive buzzers (12mm diameter) with young people, usually connecting them to a BBC micro:bit (v1) to make sounds and play musical notes. They are very quiet, and I like them that way (don't want 30 loud buzzers going at…
If you open the box, there's just a small magnet inside. So I've made smaller case to fit in the space between the frame and window. You have to press a little bit harder to get the magnet inside and once you have it inside, it's not…
I has some gripes with the original, so I made some improvements 😁. After recreating the whole model in Fusion 360 (stealing measurements from original), I…. Closed the LED holes to the right of the cooler Made the open source hardware…
a device which amplifies sound without the use of power , it works like a sort of trumpet by changing the impedance of the air around the speaker to maximize the efficiency of your music player.
![Passive Phone-Horn [iPhorn]](https://media.printables.com/media/prints/682312/images/5361776_d4140e9c-0ad0-4d32-acba-040e63506195_0f4be460-1440-4417-890e-f8cf9e89505b/img_0148.jpg)
