3017 modeli
Another one-handed bottle opener? Yes, but wait, there's more to it! Update June 2023 I got several reports from people that their print broke. Also not every slicer has the hexagon infill. This was bothering and I was searching for a way…
Wydruk około 1,54 €–1,88 € nettoWstępna wycena jednego wariantu
Aztec Death Whistle Updated (fixed bottom 12/7/2024) Small sound demonstration here.
Wydruk około 2,52 €–3,08 € nettoWstępna wycena jednego wariantu
/There are plenty similar designed wallets on the web but none fit my requirements 100% so I created my version. =============================================== 9/2/22 Added VORON Edition top and bottom.…
Wydruk około 2,91 €–3,56 € nettoWstępna wycena jednego wariantu
UPDATE : I had issues printing the honeycomb when the two pieces were not aligned 100% the same. Caused an issue when I inserted the 1/8" rods (not being perpendicular) So, I added three 1/8" holes that would always print the same place,…
Wydruk około 5,19 €–6,35 € nettoWstępna wycena jednego wariantu
************************ UPDATE 7th February 2023 ************************ Due to requests from some people who have made the Awesome Bee Feeder I have now updated the design to have the bottle holder and base plate combined as one item.…
Wydruk około 2,87 €–3,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The original finecoar Grind Setting Dial V2.0 for all new Eureka Mignon grinders Now also compatible with all* new Eureka Mignon models! For more information, please continue reading under Compatibility. If you'd like to buy a finished…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
*revision note 14-07-2024: increased the strength of the spring and travel of the bucket. *revision note 19-07-2024 : For better shooting performance, the spring is even stiffer, a little flange is added for releasing precision and the…
Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu
This is an articulated print-in-place figure in the style of the ever popular articulated dragon figures. No supports needed and a few different versions of varying lengths. The curled version was made to fit a MK3s or Ender 3 sized bed.…
Wydruk około 6,05 €–7,39 € nettoWstępna wycena jednego wariantu
UPDATE: Added a new version that's easier to print, requires less cleanup and supports, and allows access to the SD card. I also added a version adjusted for the OLED Nintendo Switch, available here:…
Wydruk około 8,86 €–10,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
THIS DESIGN HAS BEEN STOLEN AND SOLD ON EBAY, AliExpress, Bangood etc.! PLEASE DO NOT SUPPORT SUCH SELLERS ! Once my Y-Axis Upgrade ( https://www.prusaprinters.org/prints/5620-prusa-mk3-mk3s-y-axis-linear-rail-guide-upgrade ) works great…
Wydruk około 1,17 €–1,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update #1: I updated the models to work better with the new method, and add new stand model. I tried to make the description and the solution in such a way that it could be done easily, without special program, and knowledge. Color…
Wydruk około 1,81 €–2,22 € nettoWstępna wycena jednego wariantu
This is the 2024 update of my storage boxes system, with the latest revisions (D, E) of the storage boxes. For the older revisions, please have a look here . Discover my specially designed storage boxes, meticulously optimized for 3D…
Wydruk około 6,83 €–8,35 € nettoWstępna wycena jednego wariantu
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here are stackable counters…
Wydruk około 1,05 €–1,29 € nettoWstępna wycena jednego wariantu
UPDATED to V2 V2 now has a hidden mounting plate for a slim design and easy installation. Make sure to mount the plate with the hole named “up” in the up position. Use at least 4 perimeters on the mounting plate due to stress on this…
Wydruk około 11,54 €–14,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I got asked if I can make the logo so that it can be placed on a table or something. Made some changes and only tried printing the connection between the parts. For me it was a snug fit that should work to hold it together but you can…
Wydruk około 6,46 €–7,90 € nettoWstępna wycena jednego wariantu
Ein Verkauf ist strengstens untersagt! Leider muss ich sehen, dass mein Design oft geklaut oder kopiert wird. Ich habe viel Arbeit hier investiert und erwarte, dass die Lizenzregeln eingehalten werden! A sale is strictly prohibited!…
Wydruk około 4,13 €–5,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I saw a box for CCG cards with a gearing system to raise the cards up. I thought it was quite nifty but at the same time, overly complex, requiring multiple metal pins. This is my own take on the concept. Huge update - 05/12/17: I have…
Wydruk około 14,15 €–17,30 € nettoWstępna wycena jednego wariantu
UPDATE (2024/02/04) Updated all models AND added models as requested See: https://www.printables.com/model/750767-mathews-trx-series-grip-_updated-and-added-models/files ***************************** I made a simple replacement grip for…
Wydruk około 2,31 €–2,82 € nettoWstępna wycena dla PETGMateriał u źródła: PET
With THE COUNTER you get an updated version of THE CLICK BUTTON . This includes a working ballpen mechanism in a compact form combined with a counter from 1 to 8. No support is needed. And with the following assembly video you are good to…
Wydruk około 3,35 €–4,09 € nettoWstępna wycena jednego wariantu
This is a squishy fidjet toy made from 24 oval plates clamped together. If you're looking for a smaller one: https://www.printables.com/model/1176641-squish-fidget All necessary parts even fit on a prusa mini . For the assembly of the…
Wydruk około 1,32 €–1,61 € nettoWstępna wycena jednego wariantu
Here is a modification ONLY for 2.5-generation 3DP (2 heat sink holes in front) part of snapmaker 2.0 3-in-one printer. BOM: 5015 Blower 24V 0.1A HX2.54 2Pin (*1) airflow ≥5CFM (the original 2510 fan is 3.6CFM) M3x20 screw (*2) M3x2x5 nut…
Wydruk około 2,60 €–3,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Prints very easily in vase mode :) Any material you want Happy printing!
Wydruk około 0,28 €–0,34 € nettoWstępna wycena jednego wariantu
Ersatzteile für Schleich Horse Club oder als Anbau ans Puppenhaus Weitere Teile: https://www.printables.com/de/model/50036-pferde-gatter-zaun-hindernis-gate-fence-obstacle-s…
Wydruk około 0,60 €–0,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The file may be really small. Resize to your desired size. Print is quite scaleable I wouldn't recommend printing more than a .2 resolution Paint how you want! /!\ Be cautious of the leg stands when removing supports. They are a bit fragile
Wydruk około 0,96 €–1,17 € nettoWstępna wycena jednego wariantu
This is an Update to the Generic Camera Arm for SV06 & SV06+. To Date it is my most popular viewed and download model. So now I'm revising it. It now Includes a Small Lip on the block to prevent arm form twisting. The single screw…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
Not Tested
Wydruk około 1,24 €–1,51 € nettoWstępna wycena jednego wariantu
UPDATE!!! (July 2024) I am currently working on a new recceiverbox which will fit the 2024-car. As the layout in the car changed (shorter chassis and some modified parts), this receiver-box does not fit anymore. ************************ I…
Wydruk około 2,09 €–2,55 € nettoWstępna wycena jednego wariantu
UPDATE: several ppl said the labels were too deep and left holes. this version corrects that. All .STL files are at 100% size (~41 mm wide) My take on a stackable daily (up to 3 times/ day) pill box system. sections are easily unscrewed…
Wydruk około 0,97 €–1,18 € nettoWstępna wycena jednego wariantu
I remixed Jonas whistle with a scout sign emboss. Now updated! with 2 new models.
Wydruk około 0,19 €–0,23 € nettoWstępna wycena jednego wariantu
I love the RTX 3080 Piggy Bank by Nils Kal! I decided to draw new fans that closely match the original 3080 fans. I included STL files, a 3mf file and a gcode file. Share a picture if you print one!
Wydruk około 3,03 €–3,70 € nettoWstępna wycena jednego wariantu
This is a base Raspberry Pi Case for a RaspberryPi Zero 2 W(H) with mounted UPS HAT (C) (Uninterruptible Power Supply including I2C) by Waveshare. Update: replaced the connector doors. Settings Value Infill 25% (adaptive cubic) Perimeters…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena jednego wariantu
This is an easy-to-print SYNTRX (Erica Synths) or Tascam Model 12 Stand that is angled at 30 degrees. However, this stand will work for many other synths, mixers, etc . This model has been updated. The original was too large. This version…
Wydruk około 11,32 €–13,83 € nettoWstępna wycena jednego wariantu
[UPDATE V2]: V2 is now out of testing and available to print. It is much sleeker and quicker to deploy thanks to spring loaded legs. The hanging lantern mode is still preserved via three separate cords attached to each leg and tucked away…
Wydruk około 0,71 €–0,87 € nettoWstępna wycena jednego wariantu
This has been a passion project of mine for a while. I have worked on it for a couple of months and I've had an un-boxed version of it running for about all that time. This clock will reach out to a web server (either on your internal…
Wydruk około 1,19 €–1,45 € nettoWstępna wycena jednego wariantu
Hex Driver Bit Holder I designed this for attaching/removing camera quick-release plates. Keep it on a lanyard round my neck rather than searching through a camera bag or pockets for a bulkier screwdriver. Or you could tie it to a tripod…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena jednego wariantu
Update 28.07.2024: Made two new versions according to my new parametric sliding box design, one for two CR2032 batteries, and one for https://www.printables.com/de/@plaid_brad_1260466, who is in need for a case for 2xCR2032 and 2xCR2450.…
Wydruk około 0,58 €–0,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
UPDATED - now another fly head shape with a rounder head and larger eye holes. Base head part for building your own trolling flys, sometimes called umbrella flys. Picture should make it clear. I also added a simple printable/resizable…
Wydruk około 0,28 €–0,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Version 1: I printed this on and Ender 3 using: .6 nozzle .28 layer height 20% infill Version 2: On the v2, i took the suggestion and make it a slim version to reduce the printing time and filament usage. Also added a smal Voronoi pattern…
Wydruk około 3,36 €–4,10 € nettoWstępna wycena jednego wariantu
English UPDATE: Updated stl of the space-time curvature models. In this update I have slightly modified 1/2 of the equation and made some subtle changes to the surface curvature. I include the 3mf file with the settings for the MK3.5S…
Wydruk około 4,40 €–5,38 € nettoWstępna wycena jednego wariantu
Add your T-Link Tapo C100 camera to the inside corner of your Original Prusa Enclosure. Mouns via a single hole using a M3x8 screw, screw will cut the threads. If you find the holes are too loose or tight for your printer, you can edit…
Wydruk około 0,96 €–1,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A automatic battery sorter, no supports, just add battery! Updated it so it fits more batteries.
Wydruk około 6,41 €–7,84 € nettoWstępna wycena jednego wariantu
Improved cable chain for better cable harness retention. Especially without cable braiding. There are two variants: full support - Chain, half support - Chain_2. Printing I used a 0,4 mm nozzle, 0.20 layer height, 15% infill, perimeters -…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
For everyone who loves esports !
Wydruk około 0,19 €–0,23 € nettoWstępna wycena jednego wariantu
!!PLEASE CHECK THE UPDATED VERSION !! I'd like to take my Victorinox Knife with me when going camping so I designed this storage container to keep it and me save. There are two magnets (≤ 8mm diameter) required for the snapping mechanism.…
Wydruk około 1,75 €–2,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Ikea Uppdatera cutlery organizers have some quite long sections, which could be shortened for additional storage. Some sections have straight, some slanted walls. These dividers are used to restrict movement of stored cutlery when you…
Wydruk około 3,90 €–4,77 € nettoWstępna wycena jednego wariantu
Kühlschrank-Eierfach- Modular / Puzzle für Hünerei Gr.M oder 2 Wachteleier. Fehler-Update 27.04.2025: Der Puzzle-Zapfen bei Dateien Kühlschank-Eierfach- Modular 02 würde bei gemischter Zusammenstellung (2 kleine / 1 großes) zu Schäden am…
Wydruk około 0,56 €–0,68 € nettoWstępna wycena jednego wariantu
Train speed limit signs: 10, 20, 40, 60, 80, 100, 120, 160 kph/mph. Suitable for garden model railways, esp. G-gauge. With holes for screws. Easy to print - ideally, white filament in the bottom and black on the top. UPDATE: As this…
Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu
Pressure fitted adaptor for Volvo fE central console cup holder. I drink from 0,33 (slim) and 0,25 litre cans at work, and those won't stay upright in the original cupholder, so I made adaptor for it. V1 Doesn't fit regular (fat) 0,33 or…
Wydruk około 4,79 €–5,85 € nettoWstępna wycena jednego wariantu
no more accidental dropping of the eggs during dying due to the clumsiness of the spoons
Wydruk około 0,88 €–1,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Remixed from the break-out board - I'm using USB B cables for a more positive, robust connection for both my model Ms I'm doing internal soarer's converters using Arduino Pro Micros connected to the original IBM controllers. USB from the…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Omdat de tomaten niet te veel in de regen zouden staan heb ik een serre gemaakt van elektriciteitsbuis van 16mm en een pvc folie. De folie zet ik vast met die clipsen rond de elektriciteitsbuis. Because the tomatoes wouldn't be in the…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
Updated version of the mounting part that goes behind the hot end.
Wydruk około 1,50 €–1,84 € nettoWstępna wycena jednego wariantu
Recommended to print 2 Halves to get the internal channel. Also recommended to Scale down
Wydruk około 10,22 €–12,49 € nettoWstępna wycena jednego wariantu
Update 09/23. the original STL and gcode fit the phone too loosly. the current files are a much better fit this is a 3 piece assembly. Body, “CameraRim” and “MagInsert”. The body is TPU, the other parts are PET-G. The Camera Rim provides…
Wydruk około 0,22 €–0,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I previously built my own version of JKTech's printer enclosure using MDF instead of aluminum extrusions, so I had to modify this to fit my enclosure. I adapted the main body so I could screw it directly to my enclosure frame.…
Wydruk około 0,67 €–0,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Smartphone houder om aan het kader van de Core One te hangen, aan de buitenkant. Ik maakte het op broblemen te kunnen filmen. Van uit de hand is dat niet doenbaar. Daarom deze houder. Smartphone holder to hang on the outside of the Core…
Wydruk około 1,93 €–2,36 € nettoWstępna wycena jednego wariantu
UPDATE, Nu ook om tegen de muur de vijzen, Pindakaashouder vogels voederen. Now also to screw the screws against the wall, Peanut butter holder to feed birds. Porta mantequilla de maní para alimentar a los pájaros. Support à beurre de…
Wydruk około 3,57 €–4,37 € nettoWstępna wycena jednego wariantu
I updated “the most articulated Snake ever!!!” that the segments can not be rotated complete 360 degree anymore and holding better together. I added a test file that you can check before, if your printer settings will work without…
UPDATE: 15th September 2023 - Thank you all for the positive feedback for v3. I've now removed v2 as a result. UPDATE: 24th July 2023 - Whilst v2 was a lot better fit I understand some comments about smaller pieces going under the scoop.…
In the Files tab use "Ctrl F" to find the files you need. My takes on the creatures from the D&D Monster Manual are unofficial Fan Content permitted under the Fan Content Policy . Not approved/endorsed by Wizards. Portions of the…
Vader Skull. Added a version that fast-fixed the hole in the top of the helmet. its called darthvaderskullfixhole.3mf and .obj. Give it a shot let me know how it works.
lil dragon, new better quality version.
Update 1 - 17th October 2023: Thanks for the feedback and the great prints everybody! :) As expected some printers have troubles with connecting two stacks together, especially when they are not calibrated enough. I added a small chamber…
UPDATE: If you are printing with Silk PLA or have issues with the pin breaking during assembly please use the "flat pin" file for a stronger print orientation. UPDATE: License changed to allow commercial use, please credit my design if…
NEW Added 200mm clip arm for larger bags. Updated: 08/16/2024 - added an extended angled version of the insert to accommodate low cabinet clearance. @Leon61 thanks for the suggestion Updated: 04/07/2024 - added an extended version of the…
Now available in more sizes The original ghost (OG) is approximately 53 × 33 × 50 mm. It makes a fun little Halloween decoration for a desk, shelf, party, classroom, or wherever you need an absolutely terrifying presence. Print one or…
UPDATE!: I have revised the original Overture Spool Adapter based on feedback and experience after creating my Polymaker Spool Adapter. Version 2 of the spool adapter works just like the original except, I have added the small retention…
I have combined the best features (in my opinion) of three previous remixes of the Bambu Lab spool. I started with the refactored “Bambu X1 Re-Usable Spool” as a base, then added the best features of the “Improved Bambu Lab Reusable Spool…
Bambu Lab P1P Cable Chain Assembly (1/9/2023) Designed a few parts needed to attach a cable chain, similar to the one seen on the X1. The chain helps keep the USB cable and PTFE tube completely inside the P1P, which is needed if you're…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
NOTE: Tail has been updated with a better hook on the end to hang better. My niece and nephew love flexi animals, but we couldn't find a good monkey, so I designed one for them. It's a happy little monkey with flexible arms, legs, and…
Simple remix that adds ledges half way up the riser so the glass will slide in on top of for easy ventilation when printing PLA. Add LED lighting or stick cheap under cabinet lights to the bottom of the AMS for a simple lighting solution.…
PROJECT HISTORY Edit 20.4.2023: HUGE UPDATE I completely remade my parametric model that helps me generate pulleys more easily. As a result: I reuploaded all files with cleaner .stl files. Now smaller pulleys available - some have very…
My Bambu X1C vibrates quite a lot which means sometimes the bucket is being pushed away. When that happens I find filament everywhere on the table. That's the reason why I made this Remix. If you already printed a bucket without cutouts…
Newest Edit: 6-10-2024 New version follows the same concept as before but now the lid closes completely in both stacked and unstacked positions. Plus rounded edges for the little ones. Includes faster print time (albeit still takes a fair…
Updated the lid to make sure it fit the bottom of box. Lowes Mini Box. Flat lid included allowing you to add text in slicer of what is in the box! The indentations in the bottom of the box is 1 mm and your printer has to be able to print…
A trash can to house all of your material waste as you go about printing other things. Print instructions This is a no-support version of the referenced original. It requires some assembly after, but it is quite obvious how it all goes…
This update to the Treasure Chest Puzzle Box is easier to print, assemble, and remix! Printing All parts can be printed without supports. Use a brim if you have bed adhesion or curling issues. Print the Axle with at least 50% infill. The…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Deutsch: Das ist ein Schleifpapier-Block passend zu den Schleifpapier-Rollen mit einer Breite 25 mm (1 Zoll) oder auch zum selber zuschneiden dafür etwas breiter in 300 x 40 mm. Für den leichten Zusammenbau benötigt man nur noch eine…
I wanted a compact Missile Turret style pencil holder that fit in a 2x2 Gridfinity space. I ended up creating this model in 3 pieces. Holds 12 pens/pencils. **Due to the advancements in accuracy of 3d printers I have found that the…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Low Poly Rose for Vase Mode Printing. My attempt to model a low poly rose for vase mode printing. Of course you could also print it the normal way “not in vase mode” for a special looking rose! I also designed a stem to be glued to the…
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
Gravity knife fidget toy to keep your hands occupied. Updated with a safe blade and two comb blades. Assembly: The Peg should be printed two times. All the tiny blobs or other printing defects should be removed if any. BaseBottom and…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
I made this bundle of brackets so you can print your own when needed. Both L-shaped brackets and corner braces, inside and outside versions. All brackets are 3mm thick, with a 6mm thick version for extra strength when that is needed. The…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
ENG: Dragon skin with scales at 45 degrees and new version with new design and individual joints to join different parts together ITA: Pelle di drago con scaglie a 45 gradi e nuova versione con nuovo disegno e incastri singoli per unire…
Easily store your standard DnD or other dice in this novel container that uses a mechanical iris on the top, which can be opened or closed by simply twisting the knurled outer knob. Printing Tips: This model has been carefully designed so…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, buying me a coffee would be a wonderful show of support! Good quality designs take time, effort, and CAFFEINE! ;-) And then check out my other models for…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Squid Game - Osselet Set [Updated] Ready to Print Squid Game-Inspired Jacks Game (Osselet) from Netflix Dive into the thrilling world of Squid Game with our unique jacks game! Inspired by the intense challenges of the hit series, this…
UPDATE: Due to popular request, the Kit Card was updated in regards of tolerance (fit) and stability. For optimal fit I would recommend using a layer height of 0.2 mm. Christmas ornament version of the loved snitch card. Merry christmas!…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
NOTE 2/01/26: Tool works great on the Centauri Carbon 2. Just received my CC2 and the back right corner was lower than all the other 4 corners. UPDATED MODEL : Since this tool seems to be helping people get the bed aligned I made some…
Hello, This is a articulated springtrap figure it has four swap out heads closed mask, mask open, laughing, axe in head I also included a knife and an axe ,hope you enjoy Added: leg and hip withering. New hands are coming soon
UPDATED profiles for OrcaSlicer 1.9 and up. ( Download the slicer here ) Sharing some 0.4 and 0.6 profiles for the Flsun V400 using OrcaSlicer. Files are for Vanilla Klipper or Flsun Klipper (only difference is the Start and End gcodes).…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Introduction This is a simple PC mainboard frame/tray system intended for open-air or custom enclosure PC builds. The intent is to support a broad variety of mainboards from iTX to so-called EATX with modules that fasten together with M4…
![The Ultimate Finger Catapult [Easy to print] *Updated](https://media.printables.com/media/prints/941396/images/7192529_7d256018-9e3a-481a-9a42-30296430f78a_53933b0f-945f-46f8-bf3a-c4aaafb841df/afbeelding-van-whatsapp-op-2024-07-12-om-233547_1223b3e0.jpg)
![NFL Raiders Logo [UPDATED]](https://media.printables.com/media/prints/152477/images/1433724_922d1b5e-3fab-4447-bd0a-94cd3eaf200a/3d-print-raiders-logo.jpg){kind=logo}
![Raspberry Pi Case for a Pi Zero 2 W(H) with mounted UPS HAT (C) [updated]](https://media.printables.com/media/prints/1145322/images/8645813_60ef3c32-3151-4459-90df-e80098767540_e4fac271-4695-4bea-90e5-5cd78018878d/pxl_20250112_rasppicase_01.jpg)
![Low Poly Rose - Vase Mode Print [Updated!]](https://media.printables.com/media/prints/764527/images/5955426_67cdaf14-8e4c-404a-b2fe-3cdc0ab618bd_fcb92255-45bb-4088-9dc5-013d3f05d97b/img_9378.jpg)
![LEGO Speed Champions Modular Display Stand [last update 21.07.2024]](https://media.printables.com/media/prints/532084/images/6044190_522b121d-3533-45b1-9d14-b2a10072eb0b_b8c2e7a3-f852-4a50-bf7b-1311d4b55232/sc-2024-3-2.jpg)
![#0189 [UPDATED] Fanout Playing Cards Case, now V2!](https://media.printables.com/media/prints/1090799/images/8248226_31e1db75-300b-4dfb-8308-7f723ad0b955_671b0708-4fe4-4b42-958d-5f25b65b4dea/rl-20241128-007.jpg)
![Squid Game Gonggi - Korean Jacks - Osselet Set (Jacks Game) [Updated]](https://media.printables.com/media/prints/1123432/images/8479780_aec8d906-b096-4e90-bd50-58292bb4f8b6_f838fc03-0805-4fb2-898a-edf94517cb3f/screenshot-2024-12-27-221040.png)
![Modular ITX/DTX/mATX/ATX/SSI-EEB/SSI-CEB/EATX/XL-ATX mainboard frame/tray [Updated 2026-07-19]](https://media.printables.com/media/prints/35720/images/1199286_159f781c-d9e2-4896-be13-5668e22d36a3/eatxv3.jpg)