1931 modeli
A Temperature Tower designed to find the correct temperature for your filament! The included .gcode is sliced using Simplify3D with the "Multiple Processes" tool to set the temperatures at different layer heights. Take a look at the…
Remix of Tronnic's bridging tower, with the temperatures from highest on the bottom to lowest on the top. This way, you shouldn't experience clogging issues if the lowest temperature is not enough to properly melt the filament. Many…
See description over here: https://www.printables.com/model/39810-improved-all-in-one-temperature-and-bridging-tower This is a remix for Prusa Core One / Core One + / Core One L. 05.06.25 : Added MMU3 profile. 28.12.25 : Added optimized…
Update 220811: Added solid with 1deg step on request Replace the code below to this, ( BB and CC changed to 2 and 1 and replace STL to the new one ;BEFORE_LAYER_CHANGE G92 E0.0 {if layer_z>1.2}M104 S{(temperature[0]+ 2 )-( 1…
See description over here: https://www.printables.com/model/39810-improved-all-in-one-temperature-and-bridging-tower This is a remix for Prusa MK4S with and without MMU3. 17th December - Add MMU3 PETG and PLA 23th November - Fix for…
Case for Teenage Engineering's Pocket Operator. This case is compatible with the wire folding stand, and the loop at the top doesn't need to be removed. All LEDs shine through a small hole above each button, and there is a hole to allow…
With this design I have combined my tiny benchmark (link below) with a little temperature tower, which is just big enough to give me all the test results that I need to chose the printing temperature for a particular material. Features…
To adjust the temp tower you can use the py-script. https://github.com/HerrSkunkhunt42/temptower-gcode-adjustment Or use the example gcode for PETG or PLA with 0.4 nozzle at 0.2mm layer height. If you use Prusaslicer, you can insert the…
keychain for your needs. Cut Down if need be. 4mm base and 0.8 color change (0.2 layers = 4 layers) 36mm x 29mm 6mm Keyring hole
Based on the "Prusa Mini Temptower for PLA, PETG and ABS" from steveleader (original Tower from Tronnic), just included commands to wait for the hotend to heat up before continuing the print: PrusaSlicer 2.3.0, Expert mode, tab "Print…
Temperature tower for PLA and PETG including the ready made G-codes for the Ender 3 V3 SE.
Print with plastic that flexes a little, PETG or ABS will work. You can put it on or use double sided tape and and stick it somewhere. You may need support on the rabbit's feet.
This is the gcode for a temperature tower for the original Prusa MK4 with Input Shaper firmware. 0.2mm SPEED stock profile 0.4mm nozzle verbose gcode on your printer must have input shaper firmware and enabled.
I have bougtht several round Temperature and Humidity Meters to put them inside the filament spool holders. I have used one in my 3D printer chamber for temperature and humidity indication. These meeters are tiny and round. I could have…
Pencil holder, prints quite well without popdper. Petg material is better for printing.
Temp of nozzle is the main cause of stringing. Print this gcode before trying other adjustments. It starts at 220C, and automatically decreases 5C after each 5mm increments, ending at 180C The picture shows the results when filament is…
All in One Temperature & Bridging Tower - PLA MK4S GCode. Specifically sliced for the latest MK4S version with the 0.4mm high flow nozzle (HF0.4) Uses the default PrusaSlicer 0.2mm STRUCTURAL preset as that is what you will most likely be…
A stand to hold one of the cheap temperature-humidity-meter combinations available on amazon and used all around the 3D printing eco-sphere. Print instructions I printed the stand in PET since I had enough of it lying around, but it is a…
[EN} Anatomically-correct model of an Esperanza bug. Legs were modeled thicker for printability. I recommend using brims to help legs adhesion to the print bed. .3mf file includes paint-on support to limit support on overhangs. If you're…
This is the gcode for a PETG temperature tower for the Prusa MK4 with Input Shaper firmware Profile: 0.2mm SPEED (no changes) Nozzle: 0.4mm Filament: Generic PETG (no changes) The temperatures goes from 215 to 250
This is a simple holder for a XIAOMI Digital Temperature/Humidity Sensor (LYWSD03MMC) . I attach the holder to the wall with a small command strip . I use several of these sensors with ATC MiThermometer custom firmware and collect data in…
Luftfeuchte + Temperatur Sunlu JAYO Trockner S1 + Silica Ich habe mir eine Temperatur und Luftfeuchteanzeige für den Sunlu /JAYO Dryer S1 erstellt (Inspiriert durch andere Thingiverse Konstruktionen) Benötigt wird eine M6 Mutter + M6…
Description This is a heavy tape dispenser, If you have never used one, a heavy tape dispenser allows you to pull tape from it using only one hand while the other is free to hold the thing you want to secure in place. The dispenser is…
I needed a model for an assignment. This Worked. I thought I would post it on here in case if anybody needed a cell model. I printed everything on 5% infill on an Ender 3 Max. The base and the main plant cell need support, but be careful…
Hey there, back with another operator mask. Assembly should be fairly straightforward, but heres a few notes Eye Inserts go easier into the socket from outside to inside. If they dont seem to click into place for you, consider decreasing…
Print with plastic that flexes a little, PETG or ABS will work. You can put it on or use double sided tape and and stick it somewhere. You may need support on the tail or feet.
The models for temperature towers all seem to be large and long prints. This is something that will likely just be thrown away, and no one (I don't, I assume everyone is just like me) wants to wait hours for a tower to print to find the…
I had this project cooking for several months now, mainly because I had to take a break and actually play the game but today I decide it's time to showcase the end result of my 3D-printed Hackclaw figurine based on the original model. The…
Deutsch (English below) Zubehör für den Optionalen Filament Guide von Prusa. Ein halter für den Temeratur sensor der Enclouse. Er wird einfach auf den Spulenhalter geschoben wo er einrastet. Zur zusätzlichen Fixierung kann er auch mit den…
Modified the build of Potorale to add temperature variations in 3mf format using prusa slicer and tested with core one at least. Other parameters: closed door, no vents on top of the printer. PETG is easier to print in 255C while tend to…
When I finally assembled my Prusa i3 Mk3, I wanted to design something useful, to test the performance of the printer. Because I already bought some Hygrometers for my filaments, I decided to design a simple case for them. So this is…
🛠 Materials & Hardware: PLA Combo Black & White -> [ https://amzn.to/4t0FgJ4 ] GHOST OPERATOR SKULL (Tactical Charm) Bring tactical communication to a whole new level with the Ghost Operator Skull Charm ! This detailed charm for Crocs,…
Swimming pool water temperature monitoring needs a sensor whitch musnt be in contact with the water. Threfore you have to use a shaft, where you put sensor probe in. I made one for you. It has stadard outher thred G1/2 and also metric…
This is an old, generic percussive (thumping) back massager that came with a couple heads, a rounded one and a bumpy one, and my spouse requested a pointier version of the rounded head to target muscles better. I measured the threads on…
Manufacturing instructions: Material: PETG 3D Printer: FDM 3D printer, average print time 1h (input shaper enabled on MK4). Slicer settings: 0.2mm layer height, 3 perimeters, no supports Post processing instructions: None Assembly…
This already has custom gcode for the mk3.5s to print a temp tower and change temp on the right spots
A printable patch for drone operators. Built using Hueforge. 3 color print which scales well
made for my son, PLA, with two 3x16 screws and M3 nuts and superglue, use dense infill if you expect some abuse i have to reprint right joint soon after first use so added its separate file too, its mirrored in slicer Let me know if you…
Temperature knob for WÖSAB electric radiator. Since the spare part is no longer available for purchase, I have developed a replacement. It is designed in Fusion 360 and adapted for 3D printing in Prusa Slicer. Printed on Prusa 3iMK2S The…
BASETech is a common remote sensor for weather stations. They are sold as Basetech WS-9130-IT, TFA Dostmann 30.3147.IT, Techno Line TX 35-IT and more brands. Although it should be able to survive on its own, a casing might prevent…
Temperature and humidity sensor holder with a stand. Designed to be used alone or with LEGO Minifig Hexagons . Printer configuration: 3D Printer: Elegoo Neptune 3 Pro Filament: eSUN PLA+ White Slicer: UltiMaker Cura Resolution: 0.2mm…
How to use The device measures temperature, humidity and pressure and sends data to the server for analysis. This software can be adjusted to the needs: LaskaKit/Weather_Station_Mini Bill of materials Item Model ESP32 Development Board…
Printed with PLA and PETG - 50% infill, both work perfect. Best use organic supports only on table.
This keychain was designed and printed during the 3 day 3D printers assembling and operation workshop for students conduced by Make3D Company Limited and Prusa Research in The Gambia. The project fucused on "Supporting socially beneficial…
Two main bodies. Inner diameter of cap = 50mm Sensor centering ring (Nous E5). Cardboard for thermal insulation (Not necessarily required).
A printable patch for drone operators. Built using Hueforge. 3 color print which scales well
This model (3 parts) is a replacement case for the original case of these temperature loggers: https://www.geminidataloggers.com/de/data-loggers/tinytag-plus-2/tgp-4104 The case design consists of three parts: The case which houses the…
EN: To indicate temperature or function associated with temperature (for example, temperature indication, temperature monitoring points). DE: Zur Angabe der Temperatur oder Funktion im Zusammenhang mit der Temperatur (z. B.…
Demo video. https://youtu.be/dtlSmXIUfKc Build video coming soon. Operating from a single AA battery. I used a TT gearmotor 1:48. Also a voltage boost regulator to get the voltage for the LEDs and sound device. Print Settings Printer…
100x160mm sign, to let the world know your interociter is operational and available. Mesh and Solid models provided. The solid version might be an easier print. Best with color switch above 1mm, as with included gcode for the mesh…
Since all the dividers on my garden chairs were broken, it was no longer possible to stack the chairs properly causing them to rub on each other. This caused the powder coating to peel off. However this part has a slightly larger opening…
UPDATE 2022-11-02: A number of people have reported that the clips are a little too thick to insert without a lot of force or sanding. I added a version of the clip that is 0.6mm thinner. It is named ThinnerClip.stl . You may wish to…
Temperature towers with ready gcod and stl files. ABS- 220-260 and 10%fan speed in gcode ASA- 230-270 and 10%fan speed in gcode TPU/FLEX- 200-230 and 215-245 and 70% fan speed i gcode 20mm/s PLA- 190-230 and 100% fan speed in gcode PETG-…
This is also a remix of gaaZolee https://www.thingiverse.com/thing:2729076 from 190 to 225. Just removed the top two sections of the original because I don't print at such low temperatures. It's a wider range than the short smart compact…
Working with PETG on a Bambu X1, I needed a temperature tower with G-code to work in Bambu Studio. The general PETG presets work, but I want to explore faster prints. This temperature tower originates from the work of Tronnic and Kryštof…
For each printer you have a PETG model file and a PLA model file. Please make sure to keep all the gcode changes inside the files, in order to apply the temperature changes All my BambuLab Temperature Tower models: BambuLab P1P, P1S, X1C,…
Rather than setting layer temperatures manually for a temp tower, just include one line of G-custom code in PrusaSlicer's “before layer change G-code" section to do it automatically. You can use the attached .3mf file as a starting point…
Since I could not find the ideal temp tower that meets my expectations, I designed my own. Features: - Uses little material because it is not too big - Different overhangs, 45° and a curved one - A thin wall at the overhang to test the…
Desiged this tower in freecad after the model of already existing examples
No supports I wanted to add a few more things to test on a temp tower and also use minimal filament. I came up with this fever dream abomination. Enjoy! Instagram https://www.instagram.com/spitzspot/ Print instructions Category: 3D…
Update: v1.9.6 10-10-25: Test cutouts on the backside are back! Somewhere around v1.8 I left a “*” character in the code while debugging that made them disappear. My “Improved All-In-One Temperature and Bridging Tower” is very popular but…
🇦🇺 Welcome to Australia! The Sydney Opera House is one of the world's most iconic buildings and a symbol of modern architecture. It is not only an icon of Australia, it is also our representative of Oceania in the Wanderlust Collection of…
Upload of my project from thingiverse since thingiverse has become trash! Unfortunately I can't upload .exe files here so you'll need to download it from the thingiverse page or directly through this line Introduction Project Goals I…
Tests from 195 - 210 for PLA on my Ender 3 w/ a Micro Swiss Hotend. Remixed from ([https://www.thingiverse.com/thing:2729076) https://www.thingiverse.com/thing:2729076 %5Bhttps://www.thingiverse.com/thing:2729076)] for testing my Ender 3…
This is a Temperature project for PETG with temperatures starting at 220 to 265. Just open the project, insert the filament, and print. The temperatures will change automatically.
Modified model and g-code to work with PLA Silk 195c to 235c
This is a transition of my bed warping tests from Thingiverse. I was having warping issues and wanted to see how changing my bed temperature impacted printing so I made some basic models that have a similar shape to the models that were…
An elegant phantom mask. Should be printed with supports (tree) and rafts for good bed adhesion. Can be heated and adjusted to fit face better. I just used a hair dryer. Holes may be drilled for retention string. or can be attached via…
i separated the wings and base
This is yet-another-calibration tower, with several tests for overhang/bridge performance, but also other tiny features that I think represent common use cases in detailed 3D printing. One of the things the Bambu X1/X1C/P1P printers…
Temperature towers for PETG and PLA that begin from hight temperatures. And GCODES for ELEGOO Neptune 3 Pro
This is a case for the Pocket Operator series of synthesizers made by Teenage Engineering. Its main features are: Keys move freely LEDs are still visible Audio sockets accessible with standard sized rubberized jacks Possible to keep the…
EN: I wanted temp tower from lowest temperature to highest, but first temperature from 195. Didnť find, so I remixed one for myself. Use it with PLA filaments. Included Gcode file was generated for Prusa Mini in PrusaSlicer. CZ: Chtěl…
This is a coin operated vending machine designed for fun-sized candy bars. It takes American quarters or the included discs of the correct size. Use the key to unlock to door on the back to restock the machine and access the coin drawer…
Temperature tower for ABS/ASA filaments going from 230 - 270 degrees celsius. The machine code is added to the printer profile with a suffix of TempChange. If you'd like to modify the text, you can add a new text shape with a font of…
¡Saludos, comunidad de amantes de la impresión 3D en prntables! Me complace compartir con ustedes mi último proyecto: una torre de temperatura diseñada para probar diferentes materiales de impresión 3D. Si alguna vez te has preguntado…
Temperature test for PLA, TPU, ABS and PETG
This is a Temperature project for PLA with temperatures starting at 235 to 195. Just open the project, insert the filament, and print. The temperatures will change automatically.
Temperature Tower to find the correct temperature for your filament Print instruction Material: PLA Print resolution: 0,20 Bed 60°C First 10mm prints with 190°C then every 5mm the temperature increases by 5°C !warning! Watch the first few…
En este post encontraras varias torres de temperatura que me a tocado utilizar a lo largo de casi dos años
Update: Added a Version 2 in order to strengthen the fine detail extended tower as it might fail depending on the filament type This is a Remix of the Ultimaker tower which i modified slightly to also include bridging, stringing and also…
🔧 Real Utility Knife Remix – Compact, Locking, One-Hand Operable This is a thoughtfully re-engineered remix of the excellent original model: https://www.thingiverse.com/thing:3677766 I made several key improvements to enhance…
I recommend that you print the model with tree supports and rafts for bed adhesion. It can be heated and adjusted to fit the face more comfortably. I simply used a hair dryer. It is possible to drill holes for the retention string. I…
En este post encontraras dos torres para petg una de 245 a 220 y otra de 250-230
hi there! This is a case i designed for my own use for my pocket operator but figured others might have a good time using it too! Requires: 2x M3x4x5 brass heated inserts - link 2x M3x5mm bolts - link Print settings: I used a 0.2mm nozzle…
I made this cyclone separator. It consists of five parts, four of which were 3D printed. The last, the top piece, was made out of acrylic on my CNC router so I could see inside but it can also be 3d printed. In my test it worked…
Comme ma nièces à tendance à perdre les pièces, voila des pièces de rechange du célébre jeu "Docteur Maboul" (Operation en anglais). on peut imprimer tous d'un coup ou chaque pièce séparement: -Pomme d'Adam -Os de vœux -Cœur brisé -Os…
This is a completely parametric temperature tower remake from Tronnic's work (rather than a remix). I liked its basic design, but I missed the ability to tweak on parameters, and hence it is! You can: Set the temperature range and the…
By Jace1969 on Thingiverse . Seperated into their own files for ease of slicing/cutting further.
Temperature tower calibration Print instructions 0.20mm layer How-to customize the temperature range:…
**Update** I recommend using the built-in calibration tests in OrcaSlicer these days instead of this model. Of course if you want to use this one, feel free :) I really liked the number of features present in Tronnic's model but wanted…
Sun Shield enclosure that transforms your indoor aqara temperature, humidity and air pressure sensor into an outdoor wireless weather station. The combination of sun shield dishes and internal cavity ensures some degree of air ventilation…
I like the “Keychain Knife” from k-eye a lot but missed some safety and comfort features. So I redesigned a new one with his design as a reference. For safety I’ve changed the front portion for better grip and to prevent the fingers from…
Ready files to print on Prusa Core One Check the original Model for full details here: fast-operation-vise Check this video by Christoph Laimer explains assembly and how it works.
Test your filaments to find the best printing temperature. 3mf files for any other printer, just import as project, slice and you should be ready to go!!^^ Ready-to-print G-CODE for Creality CR-10 Smart Pro printers included. Remixed from…
9-4-22 Added the seperate files for each individual piece. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: .2 Infill: 38 Filament: PolyMaker PETG Category: Props
Note: The feature to generate your own temp towers has been built into the SoftFever fork of Bambu Slicer. Update 28/1: Updated slicer version and added PLA Plus Temperature Towers for PLA / PLA Plus / PETG / ABS / ASA on the Bambu Labs…
You can use only the blocks you need, arranging them before to send them to your slicer, just to print everyone at the right temperature , you need to include in personalized G code section, inside before layer change section, this code…
This temperature probe organizer is designed for the Rubicson wireless BBQ thermometer with 4 mm probes that can be found at kjell.com in Sweden. There is also a step-file attached for easy modification. The parts are intended to be glued…
Added letters A to I to this nice temp tower. That way you can use whatever range you prefer. I also added a small break-off tab so you can get a feeling of layer adhesion. Not sure how well that will work, though. Print instructions…
