Wyniki wyszukiwania: pica

Sortowanie

1819 modeli

P
PrintablesJérémy Reeder
18+

Źródło oznaczyło ten model jako treść 18+.

Pobrania
923
Polubienia
433
Ocena
5
P
Printablesquattro

Customizable Simple Picatinny / NATO Rail Laser / Flashlight Mount

Motivation A while ago I published a pretty cool bottle opener gun which did win the Bottle Opener Contest. It Features accessory rails to mount lasers, flashlights or sights. However I was not able to find commercially available…

Pobrania
921
Polubienia
122
Ocena
5
P
PrintablesJadozub

CarboPod - a lightweight and adjustable picatinny bipod made with CF tubes

I couldn't find any printable bipod that was both strong and didn't require excessive hardware, so I designed my own. The goal was to minimize the amount of fasteners used, print all required springs as compliant mechanisms, and make it…

Pobrania
451
Polubienia
68
Ocena
0
P
PrintablesBaGooN

Picatinny Rail Drawer Handle

A rugged appearance is cool handle. Fasten with two screws. Print Settings: Material: PLA Layer height: 0.30mm Supports: no Perimeters: 3 Infill: 20% My Other Handles: https://www.printables.com/@BaGooN/collections/1174222

Pobrania
390
Polubienia
136
Ocena
5
P
PrintablesTolja

FX Dreamline Bipod Mount with Picatinny Holder

FX Dreamline Bipod Mount with Picatinny Holder / This adapter does not require screws.

Pobrania
183
Polubienia
18
Ocena
0
P
PrintablesPincoyo

Watering Cap for Tropicana Bottle / Bouchon d'arrosage pour les bouteilles Tropicana

This model is especially designed for Tropicana © juice bottles and allows you to recycle them into a good size watering can for your seedlings or indoor plants. The whole thing can be printed in PLA, but for a better seal, I recommend…

Pobrania
174
Polubienia
14
Ocena
0
P
Printablesrvaccaro

Bag Rail Picatinny for CZ 457 LRP

I redesigned the original model in order to better fit to cz 457 lrp Please print with many walls and durable rolls

Pobrania
153
Polubienia
9
Ocena
0
P
Printablesmanzivo

Flashlight mount for picatinny rail

Simple lateral flashlight holder for picatinny rail. This mount allows the user to turn on/off the light using the index finger without need of a special torch switch. In the picture was mounted a 25 mm diameter torch on an airsoft…

Pobrania
126
Polubienia
12
Ocena
5
P
PrintablesSarusani

Picatinny Mount for a Tiny Flashlight

A Picatinny Mount for a tiny flashlight. (13mm diameter) I also included a version for 14.5mm diameter, to hold on to the wider front part of the flashlight. It was made for the MecArmy X2S flashlight. Additional hardware: 2x M3 nut 1x M3…

Pobrania
87
Polubienia
5
Ocena
0

These are picattini rails moded for an PT80 Gamo Air Gun

These are moded picatiny rails for a pt 80 airgun, short and long

Pobrania
78
Polubienia
6
Ocena
0
P
Printableswerk.6011

MFT3 Pica-Dry Holder

This is a small part for the Festool MFT3. A snapfit holder for the pica-dry pencils. Print it in this orientation:

Pobrania
63
Polubienia
13
Ocena
0
P
PrintablesYvesVO

Modular Minimal Pi Case with PiCam Case (MMPiC + PiCC)

Modular base for a Raspberry Pi - most large models... RPi 1, RPi2, RPi3 and RPi4 (tested). Extra additions can be made using a screw-on system. This set includes a PiCam Case with a small extension (reach is approx the reach of the…

Pobrania
58
Polubienia
7
Ocena
0
P
Printablespictorf

Dynamixel XL320 adaptor for PiCamV2

Bracket adaptor for mounting a PiCam V2 onto a Dynamixel digital servo

Pobrania
18
Polubienia
0
Ocena
0
P
PrintablesHeidi Makes

Minions (Despicable Me)

From the Minions Fandom Wiki: "The Minions are small, yellow, capsule shaped creatures, predominantly male, who have one or two eyes that were created by Eric Guillon. (...) They bring much of the comedy in the film, and they are known as…

Pobrania
7107
Polubienia
989
Ocena
5
P
PrintablesLucas F.

Picatinny Rail

Since I only found Picatinny rails with imprecise dimensions on the Internet, I decided to print a new one from the dimensions given by Wikipedia. I have also saved the f3d file so that you can start your own projects with this rail.

Pobrania
5044
Polubienia
236
Ocena
5
P
PrintablesCitruspers

RIS/Picatinny mount (metric parts, airsoft)

Why Just a simple picatinny mount that you can use to mount anything you like. Use it as a starting point for your own designs....or just print it and glue something to it. Maybe you've always wanted to mount your wisdom tooth to your…

Pobrania
2880
Polubienia
272
Ocena
5
P
PrintablesMaverick0197

Picatinny Rail Covers

Edit 09/02/2020: Added clip 6 (hexagons). Edit 03/21/2020: Added Clip 5 and modified all to remove the need for support. Individual slot covers for picatinny rails. 4 different styles.

Pobrania
2540
Polubienia
441
Ocena
4,69
P
PrintablesBike Cyclist

Parametric NATO/Picatinny Rail and Clamp

Parametric Nato/Picatinny Rail and Clamp Provides rail with n slots either with or without base body. Compatible with Weaver rail. OpenSCAD source code included. Designed to have minimum of elementary bodies for efficiency with i. e.…

Pobrania
2358
Polubienia
107
Ocena
5
P
PrintablesSamK3D

Low profile proprietary rail to picatinny adapter (fits Glock 17)

G17 rail to Picatinny adapter, for when you want to fit a pic rail only item or mount. Gives you 5 slots. Made it as low-profile as possible while still maintaining the correct picatinny dimensions. Fitted for Gen 4, haven't tried on…

Pobrania
2063
Polubienia
139
Ocena
5
P
PrintablesThePrintCoder

Picatinny Rail Riser 20mm with M5/M3 Slot

This is a remix of Picatinny Rail Riser 20mm by DNeves . An airsoft Picatinny rail riser to set accessories such as red dots and scopes 20mm higher. Remixed to fix rail width and include M3/M5 slots. The original model had a great design,…

Pobrania
2025
Polubienia
260
Ocena
4,67

Picatinny Angled Foregrip

Print upside down. Smaller one is more versatile, larger is a bit tighter and may not fit all picatinny, especially printed picatinny that might be slightly oversized. Two 6-32 screws.

Pobrania
2013
Polubienia
287
Ocena
4,78
P
PrintablesMFTuning

Picatinny

Планки пикатинни и зажим для них, под свои модели. Category: Sport & Outdoors

Pobrania
1928
Polubienia
163
Ocena
4,5
P
Printablesquietmesh

Bipod for picatinny

Print the feet in as soft TPU as you can, I printed mine with 60A TPU from Recreus, the softer the better the grip. The M3 screws will thread itself. BOM M5x20 2pcs - For legs M5 Locking nut 2pcs - For legs M5x40 1pcs - For picatinny M5…

Pobrania
1612
Polubienia
306
Ocena
5
P
PrintablesJohny69

M-LOK Picatinny rail

Created a M-LOK Picatinny rail, to mount accessories to your firearm. To attach, you need to buy the screws and nuts, either directly from Magpul or from aliexpress or where ever is easiest for you. You need 2 screws and 2 nut to attach.…

Pobrania
1603
Polubienia
182
Ocena
5
P
Printablesquietmesh

Picatinny rail 5 slot

CAD file included

Pobrania
1600
Polubienia
118
Ocena
5
P
PrintablesJamie B.

Parametric NATO (Picatinny) rail

STANAG 4694 NATO rail for mounting firearm/paintball/airsoft accessories (scopes, lights, etc). Backwards compatible with the older MIL-STD-1913 (Picatinny) standard. Open the file in Fusion360 and edit "User Parameters" (Modify -->…

Pobrania
1572
Polubienia
93
Ocena
4,67
P

Picatinny Rail Riser

Picatinny Rail Risers in 13mm, 19mm, and 25mm. prints in orientation as provided without supports (standing on end) bolt hole is covered by a thin membrane to improve print quality, must be drilled out post-process PETG recommended as…

Pobrania
1526
Polubienia
192
Ocena
4,92
P
PrintablesSzeez

Picatinny folding iron sights

To assemble it you'll need 1 m3 by 20mm and 4 m3 by 30mm socket head screws, 1 self locking m3 nut and 2 normal or thin m3 nuts and 4 m4 by 6 set screws To adjust X axis turn the screw on the rear post To adjust Z axis position the yellow…

Pobrania
1525
Polubienia
290
Ocena
4,7

Swoopy Picatinny Angled Foregrip Update

Redid my angled foregrip for M3x25 screws and hex nuts. Hangs on to the rail much, much better now. There are long and short versions here.

Pobrania
1499
Polubienia
229
Ocena
4,88
P
PrintablesLoneWolf052

Shade Vertical Foregrip; Slim-Top-Version for low-profile Picatinny rails

The original Shade Foregrip had wide top brackets so it would clamp down securely to Nerf-Rails. However this prevents it from being mounted to certain low-profile Picatinny rails (for example the one found on Worker Retaliator pump…

Pobrania
1467
Polubienia
326
Ocena
5
P
PrintablesSillybutts

Printable Worker Seagull Iron Sights - Picatinny Iron Sights

---------------------------------------------------------------------------------------- Description ---------------------------------------------------------------------------------------- A pair of nice and simple picatinny attached…

Pobrania
1406
Polubienia
266
Ocena
4,88
P
PrintablesKN16

Magpul AFG Clone - Picatinny Rail

Print this with supports to the build plate only to handle bridging on the underside of the p-rail attachment area. PETG or PLA+ recommended for durability and heat resistance. Affixing AFG to Picatinny Rail: Vertically, you can affix…

Pobrania
1269
Polubienia
263
Ocena
4,8
P
PrintablesRedCowl

Picatinny Stock

To build one, you need Attachment print (either pic center or hole center) Stock (m3, m3 w/ heatset, or 4-40 x 3/8 screws) in either normal or short lengths Matching buttplate to the stock chosen 2x 10-32 nuts (Imperial Mounting) or 2x M5…

Pobrania
1252
Polubienia
178
Ocena
4,83

Picatinny "lurker" foregrip

Disclaimer : I made this as a shitpost, I didn't expect it to be particularly useful, and somehow it's been found usable nonetheless. I imagine there are better designs, but thank you for considering mine regardless. Foregrip I designed,…

Pobrania
1230
Polubienia
166
Ocena
4,5
P

Luna "Knockout" Angled Foregrip (Picatinny)

The “Knockout” Angled Foregrip design! This foregrip gives a different, unique feel when pulling the gun into your shoulder and controlling recoil! ///This cannot use the MMS Quick Release Pins! This needs actual hardware!/// It might…

Pobrania
1173
Polubienia
160
Ocena
5
P
PrintablesFileForge

Quick release Picatinny rail mount (Print-In-Place)

version 2 is out and its smaller then ever!! Introducing the super cool Quick-Release Picatinny Rail Mount, a game-changer in the world of firearm accessories. The quick-release allows for easy changing of accessories or adjustment on the…

Pobrania
1164
Polubienia
154
Ocena
4,67
P
PrintablesRESTLESS DESIGN

Picatinny Rail Set 01

I designed these picatinny rails as a design exercise, but they could be useful to someone :) I've included a technical drawing from the MIL-STD-1913 standard that these rails are modelled after. Support If you'd like to support me for…

Pobrania
1150
Polubienia
94
Ocena
0
P
PrintablesFAFOO1

ar15 foregrip handle for picatinny rail

this is a robust foregrip/handle for picatinny rail

Pobrania
1147
Polubienia
143
Ocena
5
P
PrintablesJoker

Bipod for picatiny (retractable)

-remixed model - stronger and more massive body, resized bolt and nuts holes, remixed foots //3.1.2023 now printing model for test //4.1.2023 tested result OK, added photos. -Hardware needed: M6x20 2pcs - For legs M6 Locking nut 2pcs -…

Pobrania
1131
Polubienia
177
Ocena
5
P
PrintablesHerbert_W

Parametric Picatinny/NATO rail v2.1

Are you looking for a quick, convenient way to put a Picatinny rail in an OpenSCAD design? Do you want to generate a standalone rail with ports for mounting it with screws? Hopefully you do, because that's what this does. There's two…

Pobrania
1122
Polubienia
91
Ocena
5
P
PrintablesFaceHaver

Angled foregrip picatinny

Just a test of my modelling abilities. Works well. I basically wanted something that would print very nicely. Requires 2x M5x30 bolts and M5 nuts. Print Settings Printer Brand: Creality Printer: Ender-3 v2 Rafts: Yes Supports: Yes…

Pobrania
1038
Polubienia
132
Ocena
5

Star Trek: Picard Combadge

Wanted to do a Star Trek: Picard combadge with stand so here it is. Update May 5 2024 - Widened the gap in the bars to look better. Update December 19 2023 - Redesigned the whole badge to better match the screen prop. Stand base and leg…

Pobrania
1029
Polubienia
172
Ocena
5
P
PrintablesLL77

11mm dovetail adapter to 22mm picatinny

22mm picatinny rail adapter to use in 11mm rail. Needs: 1x 20mm m3 screw 1x m3 nut

Pobrania
1017
Polubienia
45
Ocena
4,67
P
Printablesmotivemachining

GoPro Picatinny Rail Side-Mount

Mounts an action camera to either the right or left side of a picatinny rail. Record the action of your next paintball, airsoft, or 3-gun match. Requires a 10-32 nut and 1.25" bolt to attach to the rail, and an M5 nut press fits into the…

Pobrania
1009
Polubienia
112
Ocena
5
P
PrintablesCitruspers

RIS/Picatinny riser (metric parts, airsoft)

Update: added an optional taller version by request Why I have T1-style red dot that sits very low on the rails of my airsoft replica's. This print raises your sight by ~32mm which is perfect if you're using goggles/helmet/mesh covers.…

Pobrania
1000
Polubienia
187
Ocena
5
P
PrintablesSillybutts

Silly Scope (Faux Scope for Picatinny)

This is a simple faux scope. Basically, a fancy tube with a crosshair and some picatinny brackets. There are three crosshair options, two different lengths, and adjustable picatinny bracket spacing. Changelog: 5-18-2024: Release.…

Pobrania
994
Polubienia
245
Ocena
4,91
P

Picatinny Handstop

A Simple Handstop for my Caliburn pump foregrip mounts via Picatinny rail. might also be usable for airsoft or real firearms, but only tested on a Calburn 'nerf' blaster. (temperature and recoil considerations) Helps keep your hand from…

Pobrania
943
Polubienia
140
Ocena
4,75
P
PrintablesTheroux

5-Slot Picatinny Rail & M-LOK nut (M5)

Summary: 5-Slot Picatinny Rail with the correct dimensions. Note: The rail length is 54.75mm Printing instructions: Use PETG/ASA/ABS Perimeters: 3 Infill: 100% (prefered) No Supports needed - See pictures for result with or without…

Pobrania
942
Polubienia
149
Ocena
5
P
PrintablesStaszek Salik

Index Grip for Picatinny Rail

Adapted the original design to fit Picatinny rail. Use two M4x30 screws to secure mount to the rail. Can be printed upright without supports.

Pobrania
930
Polubienia
166
Ocena
5
P
PrintablesCitruspers

Gopro RIS/picatinny adapter (metric parts, airsoft)

Why I wanted to mount my actioncam upside-down under my airsoft pistol, using metric nuts and bolts and a bit of plastic. This is the result. Features Mounts on your everyday RIS/Picatinny 21mm rail Uses metric nuts and bolts Used the…

Pobrania
917
Polubienia
172
Ocena
4,75
P
PrintablesJohny69

Picatinny bag rider Tikka T3X TAC A1

Print in upright position, no supports needed. Holes are designed slightly undersized so before assembly, drill through holes with 4mm drill. Designed for M4x30 bolt and M4 nut. 1/8 inch imperial hardware should work as well.

Pobrania
914
Polubienia
61
Ocena
3,67
P

MMS/Picatinny Quick Release Pins

Perfectly sized pins for my MMS designs or your Picatinny products! They're designed to be held in by tension. And if printed correctly, they'll hold very well until specifically pushed out when needed! ///These Pins Need To Be Printed…

Pobrania
887
Polubienia
74
Ocena
5
P
PrintablesMars1307

Picatinny fixed sights

I made these sights for my airsoft replica of the G18C (but it should fit any picatinny rail) because I did not find any that I liked. It's easy to slide on the rail and it doesn't move after it's been installed. I'm using Planetler's…

Pobrania
862
Polubienia
97
Ocena
4,33
P
Printablesshevron

OpsCore ARC rail to Picatinni Rail Adapter

A small adapter that allows mounting Picattiny-style gear (e.g. a tactical flashlight) on a helmet with OpsCore ARC rails. Requires an 8mm M4 screw and an M4 nut - these are used to tighten the adapter in place and ensure it doesn't slip…

Pobrania
839
Polubienia
83
Ocena
5
P
PrintablesCorvus

Easy Bolt Action + T-Pull Mod X-Shot Fury-X (simply slide over the picatinny rail)

UPDATE: additional versions with EXTENDED bolts ------------------------------------------------------------ Easy Bolt Action Mod ---> X-Shot Fury-X To make the FuryX, bolt action or T-pull primeable - just slide it over the rear…

Pobrania
836
Polubienia
103
Ocena
4,92
P
PrintablesBigCookieDaddy

Tropical Leaves Vase

A clean and easy-to-print vase model, perfect for home decor, plants, or display use. The model can be scaled freely to match your needs. No supports or raft are required, making it beginner-friendly and reliable to print. Tested…

Pobrania
824
Polubienia
212
Ocena
5
P
PrintablesTom Tulpe

Dachshund / Dackel by Picasso

Parameterizable Version of Picassos famous Dachshund. Just scale it as you want! Have fun with it.

Pobrania
819
Polubienia
97
Ocena
5
P
PrintablesNico Smit

45deg Iron-Sight (picattiny)

Zeros to about 50m but Elev. and Windage is adjustable. Requires: 1x M2x~10mm 1x M3x~23mm + nut 2x M5x~25mm Not all picattiny is manufactured within the same tolerances thus sanding may be necessary.

Pobrania
807
Polubienia
99
Ocena
5
P
PrintablesLoneWolf052

Fixed Picatinny buffer tube

A fixed AR-15 style, mil-spec buffer tube that attaches to Picatinny stock interfaces. Printed in a single piece lying flat for incresed sturdiness. Mounts with two M5x30 bolts and M5 Hex nuts. The tube has 4 postions for the stock to…

Pobrania
784
Polubienia
102
Ocena
5
P
PrintablesMaverick0197

Picatinny Buffer Plug

Update 08/14/2021: Updated EndplateV2 to keep it from catching on the charging handle. Update 08/10/2021: Added a V2 Endplate that allows the use of metal endplates. Added a hole in the Rail so that the Endplate can be removed from the…

Pobrania
776
Polubienia
55
Ocena
5
P
PrintablesGunner Leo

Nerf Raider / Rampage grip for picatinny and Dart Zone rails

A grip I modeled after the Nerf Raider/Rampage that attaches to picatinny rail. It's not an exact 100% one to one of the grip but it's as close as I can get, and it feels the same in the hand. It's my favorite pump grip Nerf has made, and…

Pobrania
775
Polubienia
137
Ocena
4,25
P
Printablesquietmesh

Dovetail to picatinny

Secure it with three 4-5mm grub screws. The CAD files are included.

Pobrania
772
Polubienia
55
Ocena
0
P
PrintablesKolumbb

Picatinny rail cover long: Variants

Picatinny rail cover long version 156mm. 3 variants: hexagons, chevrons, stripes Made of ABS - proper supports are important

Pobrania
768
Polubienia
86
Ocena
0
P
PrintablesSillybutts

Nerf Silly Shell Carriers/Holders - Picatinny Mounted

Video overview here: Usage demo here (0:23): ---------------------------------------------------------------------------------------- These are shell carriers/holders for Silly Shells ! They all hold Silly Shells horizontally across the…

Pobrania
725
Polubienia
114
Ocena
5
P
PrintablesSpotmatic

PiCa135 - a pinhole camera with shift capabilities

UPDATE June 2021: PiCa135 lensboard 2.stl is replaced with a new version UPDATE Feb 2021: New thumb wheel: https://www.printables.com/model/168680-pica135-improved-thumb-wheel-film-advance-mechanis Replaces the parts…

Pobrania
723
Polubienia
159
Ocena
5
P
PrintablesLeedle Dynamics

Nerf Scope (Nstrike and Picatinny versions)

A “”""scope"""" for your blasters, mainly cosmetic, but it can function as iron sights, the reticles inside the caps can be lined up for rough aiming and it has a set of actual iron sights on the top that look like a small red dot on top!…

Pobrania
721
Polubienia
177
Ocena
4,92
P
PrintablesAllram

Picachu Remix Remix Low poly

Since the remix of Pica had errors i made a "fixed" version of that :) Category: Sculptures

Pobrania
720
Polubienia
42
Ocena
4,91
P
PrintablesRAM_46

Vertical Grip - Picatinny

This grip can be attached to Picatinny-Rails. I used the model from the link as a reference ( https://fortismfg.com/ar15-fortis-shift-vertical-grip ) Raft: No Support: No Material: 2xM4x30 bolts 2xM4 nuts

Pobrania
718
Polubienia
142
Ocena
5
P
Printablesthe8bitbyte

nerf rail to picatinny

a nerf attachment that has a picatinny rail on top for attachments

Pobrania
698
Polubienia
66
Ocena
4
P

Papel Picado (Templates & Designs) for Dia De Los Muertos (Day of the Dead)

See the new designs from 2025! https://www.printables.com/model/1473251-dia-de-los-muertos-papel-picados-day-of-the-dead-p by CriptasticHacker https://hackaday.io/CriptasticHacker celebrate Dia De Los Muertos (Day of the Dead) with some…

Pobrania
696
Polubienia
73
Ocena
0
P
PrintablesQwermMakes

Picatinny MP7 Grip

Picatinny MP7 Grip by Qwerm A picatinny version of the folding grip from the MP7A1. This is designed with some tight tolerances so it will most likely require some post processing to get things to move smoothly. I recommend using a file…

Pobrania
692
Polubienia
125
Ocena
5
P
PrintablesG Rex

45 degree picatinny rail mount

This is a 45-degree offset picatinny rail that is made to use 3m x 30mm bolts to mount. I used a file by unseenkiller and JPGunCAD (8) Unseenkiller and JP GunCAD - Pictainny Dev Blank (odysee.com) as the base. the rail is 48mm long to fit…

Pobrania
689
Polubienia
62
Ocena
0

Dope Data card holder for [ air ] rifle precision rifle shooting scope or RIS Picatinny mount

This is designed for PRL type shooting or any type of target shooting where you need to make notes as you go. It's designed to hold a standard credit card sized plastic card which are about £10 for 100 on amazon 0.76mm thick (30mil)x- 86…

Pobrania
686
Polubienia
64
Ocena
3
P

Luna "Bolter" Angled Foregrip (Picatinny)

The “Bolter” Angled Foregrip for Picatinny! This Angled Foregrip features a more sturdy, higher surface area gripping surface. It puts a little space between your grip and the center axis of the rifle, which works particularly well with…

Pobrania
684
Polubienia
100
Ocena
5
P
PrintablesLeedle Dynamics

Picatinny rail riser (with peep sights)

needs 3x m4*25 nuts and bolts to mount

Pobrania
676
Polubienia
125
Ocena
5

Star Trek: Picard Phaser

Here's my attempt to recreate this very detailed phaser. It took some work, but features a neat sliding top that moves the popup sight up and down, removable power cell, and squeezable trigger for that fidgety satisfaction. February 4…

Pobrania
674
Polubienia
147
Ocena
5
P
PrintablesRedCowl

Dart Zone Venom Pro Picatinny Stock Attachment Point

This needs 2x M3x6mm SHCS and 2x M3 nuts, print all parts without supports. Press the M3 nuts into the inside of the stock point, then screw the SHCS through the picatinny, through the stock point and into the nuts. This attaches to the…

Pobrania
669
Polubienia
99
Ocena
4,83
P
Printablestw 300

Picatinny Rail Flashlight Mount

This is a single pice flashlight mount for picatinny. it is compatible with 21mm wide flashlights but was designed for the single mode WAYLLSHINE flashlights. The mount can be locked in place on the rail using 1 or 2 3/8" 4-40 screws but…

Pobrania
661
Polubienia
74
Ocena
4
P
PrintablesEJTH

Picatinny rail for PP750 Air pistol

Very simple picatinny for artemis / snowpeak PP750 & PP700 Only a friction fit sufficient for bipod, not for any kind of sighting attachment please.

Pobrania
661
Polubienia
34
Ocena
5
P
PrintablesJohny69

45 degree offset mount picatinny

Designed to have a small footprint on the main rail, so that it fits behind or in front of your scope. Specifically designed to fully support the holosun 507 pistol red dot, which has the same footprint as an RMR. After printing all the…

Pobrania
655
Polubienia
49
Ocena
5
P
PrintablesFileForge

Quick release Picatinny rail mount V2 (Print-In-Place)

This is the second version of the Quick-Release Picatinny Rail Mount. The V2 is about 40 percent smaller by volume then the V1. The quick-release allows for easy changing of accessories or adjustment on the fly. This thing is fully…

Pobrania
655
Polubienia
91
Ocena
4,43
P
Printablessuper_perf

Raspberry Picade 3D printable

Im a truly 90's Kid and grew up with all those Consoles from the past. Since i had some Parts laying around and wanted to build some Cool Case to run those Arcade Games from it was no question to Print it out of my 3D Printer. You can use…

Pobrania
651
Polubienia
175
Ocena
5
P
Printablesmaot1985

Picatinny Rail Female Diamond Grip (by cmdctrl from Thingiverse)

Lässt sich mit der Picatinny-Halterung nach unten mit etwas Support einwandfrei drucken. Update 14.02.2024: Der Griff ist als Anbau an eine Adderini zu schwach. Beim Spannen der Adderini über den Griff ist die Picatinny Aufnahme des…

Pobrania
648
Polubienia
91
Ocena
4,5
P
PrintablesHermes Endakis

Scribe Block for Pica Automatic Pencil

A Pica pencil version of DSkolnik offset scribe Block. Deleted the original pencil holder and added a 5.9mm hole for the shaft of a Pica automatic pencil. Fit is snug, and helps to add a little pressure to the pencil. Other than that, a…

Pobrania
645
Polubienia
55
Ocena
5
P
PrintablesLeedle Dynamics

Hardware free vertical foregrip (Picatinny)

To assemble just look at the second picture, you print two cores, sandwich them together, put the sleeve over it and punch the pin through and then once its on the rail you can put the joined pins in to hold it in place

Pobrania
642
Polubienia
176
Ocena
4,94
P
PrintablesVladimir Kafka

Czechoslovak 1938 light fortification object "řopík" (A-140Z, atypical)

Between 1935 and 1938, the Czechoslovakian government had been building a line of border fortifications as a defense against Hitler's Germany. However, it was still far from finished in 1938, and in the end, it was never used because of…

Pobrania
640
Polubienia
60
Ocena
5
P
PrintablesKavitate

Dual Sided Picatinny Rail

A single-center dual-sided picatinny rail.

Pobrania
632
Polubienia
119
Ocena
5
P
Printables79th Jedi

Fibre optic (filament) Picatinny Iron Sights

remix of https://www.thingiverse.com/thing:4906938 made the holes bigger to accomodate 1.75mm filament, just slot it in, trim, and you're good to go! Hardware needed: M5*30bolt and nut, 1.75mm filament

Pobrania
631
Polubienia
98
Ocena
5
P
Printableskondratk

CZ Shadow 2 / CZ 75 extended magazine baseplate with picatinny rail

This is a custom base plate for an extended CZ Shadow 2 magazine. This baseplate can be used with picatinny rail attachments. My case was to attach Mantis, so it can be used together with a holster. Print it vertically with support (back…

Pobrania
625
Polubienia
49
Ocena
5

Picard Bust

This was an old design I made like 7 years ago. It got spread around thingiverse for a while so now it's here.

Pobrania
618
Polubienia
130
Ocena
5
P
PrintablesMFTuning

Picatinny

Планки пикатинни и зажим для них, под свои модели. Category: Sport & Outdoors

Pobrania
615
Polubienia
64
Ocena
5
P

"Magpul" like vertical grip RIS (Picatinny) (2 Versions)

Two versions tactical vertical grip inspired by Magpul modeled to by printed easily in one piece without suport. Need M3 fasteners. Printing "0.20mm SPEED" 30% Infill 4 Parameters (Because of the clamping) Prusament PETG base settings…

Pobrania
615
Polubienia
84
Ocena
5
P
PrintablesRudy Martin

Picatinny Rail 64.8mm

Picatinny Rail 64.8mm

Pobrania
610
Polubienia
60
Ocena
5

C4 Picasso Air conditioning shutter gear

Il s'agit d'une pièce qui semble casser régulièrement sur les C4 Picasso. Il s'agit de l'engrenage partie haute de la pièce qui ouvre et ferme les volets pour la circulation de l'air chaud ou froid. Il existe une version sur Thingiverse,…

Pobrania
599
Polubienia
14
Ocena
0
P
PrintablesRudy Martin

Picatinny Rail 194.8mm

Picatinny Rail 194.8mm

Pobrania
597
Polubienia
65
Ocena
5
P
PrintablesMighty Shrub

Extended Picatinny Rail - Dart Zone Max Outlaw

This remix adds picatinny rails to the Dart Zone Outlaw! It's longer than RedCowl's original model, to give the front of the blaster a chunkier feel. Like RedCowl's design, this is a drop-in that replaces the front rails and re-uses the…

Pobrania
597
Polubienia
88
Ocena
5
P
PrintablesLeedle Dynamics

Picatinny Low Hardware Bipod

Its a bipod. only hardware needed is a m4*25 nut and bolt the legs also fold. yay

Pobrania
589
Polubienia
105
Ocena
4,8
P
PrintablesInfillTech

3-slot Picatinny riser

This is a 3-slot picatinny riser. You can mount it onto your picatinny rail to be able to comfortably use a Red-Dot sight while wearing safety goggles. Use Paint-On Supports as shown in the pictures. Supports only on printbed. Set…

Pobrania
574
Polubienia
48
Ocena
0
P
PrintablesPlatzhalter

Flexible Pen with a simple design - works with 2,8mm Pica leads

This pen uses its own stiffness to grab on a 2,8mm lead (also used by Pica pencils see here: https://www.pica-marker.com/en/pen/pica-dry ) The lead is simply inserted from the tip wile pressing on the walls adjacent to the cutout on the…

Pobrania
564
Polubienia
245
Ocena
4,2