1809 modeli
Warning! The TS80 insert with large cable compartment was uploaded with the wrong dimensions. Don’t print it if you have downloaded it before 28/2/2023. A new version has been uploaded with the right dimensions. Design I've created my…
Wydruk około 1,88 €–2,30 € nettoWstępna wycena jednego wariantu
a spine chain cable for Ender 3 V3 SE Print Settings Printer Brand : Creality Printer : Ender 3 V3 SE Supports : No Layer Height : 0.2mm Infill : 10% Filament : PLA
Wydruk około 6,46 €–7,89 € nettoWstępna wycena jednego wariantu
Pineaple + Crown = An idea that poped into our mind a few days ago and we created a pot design out of it! Print information: Recomended vasemode or semi-vasemode settings (0% infill, 0 top layers, 2 or 3 outter perimeters - for a…
Wydruk około 2,17 €–2,65 € nettoWstępna wycena jednego wariantu
Printing: The pine cone lampshade was printed with only one perimeter. A modifier and a negative volume are included in Prusa Slicer project file to create a geometry that can be clamped in between the two lamp holder parts. Please see…
Wydruk około 0,30 €–0,36 € nettoWstępna wycena jednego wariantu
A Multipart Pinecil Case remix that is a bit taller (+5.2mm) with a different set of cutouts and accessories allowing a full set of spare tips to be stored. The dimensions have been change to allow clearance for a 2nd tip mount which…
Wydruk około 0,25 €–0,31 € nettoWstępna wycena jednego wariantu
Easily printable cervical vertebrae with discs. No wipe tower. Image segmentation made in 3D slicer. Other 3D works in Grasshopper and MeshMixer Lehce tisknutelná krční obratle s ploténkami. Bez čistící věže tištěno. Segmentace CT dat…
Wydruk około 10,97 €–13,40 € nettoWstępna wycena jednego wariantu
Lampshade for E27 lamp socket. To insert the lamp socket, a negative volume was inserted in the lampshade in Prusa Slicer (generic cylinder, D=41mm), please see 3mf-file. Assembly: Insert the lampshade holder by pressing the small…
Wydruk około 1,65 €–2,01 € nettoWstępna wycena jednego wariantu
A new entry into the geometric plant pot series. And yes... We really like pineapples. Used Filament: This model was printed using Urban Grey Matt PLA from FormFutura The FormFutura team was so nice to send us some samples, and we had the…
Wydruk około 2,57 €–3,14 € nettoWstępna wycena jednego wariantu
My other designs: Kelly Egan's ornaments A pinecone Christmas tree ornament. Print instructions Prints as two parts, the cone printed in spiral mode with slightly thicker walls 0.6mm and a cap.
Wydruk około 0,18 €–0,23 € nettoWstępna wycena jednego wariantu
This is a remix out of two amazing models. Its a combination of the nice formfactor of a Pineapple and the Puzzle-Feature of a Maze Box. Its perfect as a gift box for money or jewerly, but also as a nice looking coffee table toy.
Wydruk około 13,29 €–16,25 € nettoWstępna wycena jednego wariantu
This is a scent training vessel for dogs learning or competing in scent work / nose work. You can place the scented object inside (such as a cotton swab infused with essential oils). There are two sizes to choose from (the original, 64 mm…
Wydruk około 2,14 €–2,61 € nettoWstępna wycena jednego wariantu
I've designed two different print in place support free axle benders for pinewood derby cars. They are used to bend standard axles, 0.087 inches in diameter by 1 inch long. One is a hardware free version that bends a single angle ~ 3…
Wydruk około 2,88 €–3,52 € nettoWstępna wycena jednego wariantu
I made this remix to fit two inserts in the top and my powerbank in the bottom piece. You can either fit two inserts next to each other in the top part or use the dual width one i made. The one i made allows for a sligthly longer cable…
Wydruk około 0,19 €–0,24 € nettoWstępna wycena jednego wariantu
My Omnifixo needed a cool field kit too, but I don't own a TS80P, I own a Pinecil. There's room for improvement, but I'm pleased with it. The plate is best slid on from the side so the magnetic clamp bases don't shoot out and stick to it.…
Wydruk około 5,54 €–6,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Built an “all in one” for my Pinecil soldering iron, CNC Kitchen adaptors, and accessories. I used the Fusion 360 GridfinityGenerator plugin by Lev Mishin for the base model - great resource!…
Wydruk około 8,72 €–10,66 € nettoWstępna wycena jednego wariantu
You need to use the connector in order to assemble the head and the spinal column (you'll find it on the display stand page). Human skull: https://www.printables.com/fr/model/607248-human-skull Display stand:…
Wydruk około 2,30 €–2,81 € nettoWstępna wycena jednego wariantu
Human spine with sacrum model created by direct conversion from CT scans A world famous doctor (and our good friend) actively working in the field of surgery provided us with her skeleton for study purposes. The model is created by…
Wydruk około 25,08 €–30,65 € nettoWstępna wycena jednego wariantu
A cheerful articulated Pineapple Buddy that brings a tropical vibe anywhere it sits! 🍍 Height: ~90 mm 🦵 Fully print-in-place articulated legs for fun dangling movement ✨ A perfect addition to your kitchen, workspace, or fruit-themed…
Wydruk około 2,81 €–3,43 € nettoWstępna wycena jednego wariantu
Combination of Ender 3 v3 KE / SE removable bin & cable holder and lid and Ender 3 V3 SE Spine cable chain - Base
Wydruk około 1,26 €–1,54 € nettoWstępna wycena jednego wariantu
A super quick and convenient book mark, that serves as a spine-pull for your favourite books.
Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu
Bookbinding clamp to use on wetted cardboard or chipboard to make even curves for the spine of a hardcover book. No supports needed to print, does require epoxy/glue to connect the parts, or can plastic weld with a soldering iron. To use,…
Wydruk około 7,10 €–8,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These are some chucks to hold the inner and outer portion of a standard pinewood derby wheel for tuning purposes. They fit standard drill chucks, remember to use low speeds when polishing. The derby wheels I used have the following…
Wydruk około 2,01 €–2,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Building on top of Yankeespitfire 's bed chain , this model directly replaces the black plastic cable holder for the bed with the chain end. Chain pieces can get directly attached to this piece. This model only includes the replacement…
Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu
This is an axle angle gauge for measuring the angle of pinewood derby axles after bending. This gauge is setup for bends ~0.375in from the head of the nail. Print Settings Material: PLA Nozzle Size: 0.4mm Layer Height: 0.2mm Perimeters: 2…
Wydruk około 1,00 €–1,22 € nettoWstępna wycena jednego wariantu
EN Pineapple Cutter - Peel - Ananas Cutter and Slicer with separate threaded handle IT Sbuccia Ananas con manico filettato rimovibile
Wydruk około 4,73 €–5,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a flower pot inspired by the shape of a cut pineapple. I really looks nice when printed in yellow. Sample GCODE file is attached for easy reference. Users may also slice their own GCODE files by using the attached STL files…
Wydruk około 7,09 €–8,66 € nettoWstępna wycena jednego wariantu
This is a miter box jig to hold derby axles that allows a groove to be scored in the nail heads using a hack saw. The is no hardware needed as the clamping force is provided by the user as they grip the handle. To release the axles the…
Wydruk około 6,70 €–8,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Small box and stand for soldering tips for Pinecil or TS100. The case is designed for short tips (88 mm length). Adjustment for longer tips: In case use have “normal” (105mm long) ones you can adjust the model in following ways. adjust…
Wydruk około 1,47 €–1,79 € nettoWstępna wycena jednego wariantu
Check your local rules to see if balancing can be done, or if there are restrictions on how to balance (such as adding or removing mass). The fixture will require the following additional hardware: Qty 2 - M5 hex nut 16mm or longer M5…
Wydruk około 0,69 €–0,84 € nettoWstępna wycena jednego wariantu
This clip was made for the reel from Pinecil, TS100, TS101, TS80 & TS80p Case with options, Stand, Solder Reel, Storage Box . You may also want to try Stronger Spool No Supports by @crashkg , instead of the original.
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
Diffusor / Streulichtscheibe für eine Lupine Pico LED Helm- / Stirnlampe. Das Licht ergibt nicht mehr einen einzelnen Spot sondern wird sehr schön gestreut. Ich habe zwei Varianten gemacht: einmal mit zwei Lagen und einmal mit drei Lagen…
Wydruk około 0,27 €–0,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Improved cable chain for better cable harness retention. Especially without cable braiding. There are two variants: full support - Chain, half support - Chain_2. Printing I used a 0,4 mm nozzle, 0.20 layer height, 15% infill, perimeters -…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
Hello, designer pineapple - decor element. Thanks for your download, enjoy the print!
Wydruk około 7,30 €–8,92 € nettoWstępna wycena jednego wariantu
Transform your collection of Pinewood Derby cars into a stunning wall-mounted display with this miniature display mount. Showcase your most prized cars and relive the memories of your victories every time you look at them. With its sleek…
Wydruk około 1,87 €–2,28 € nettoWstępna wycena jednego wariantu
I created a Omamori Happiness Plate with a Japanese symbol for Happiness. I hope it brings Happiness to You :-) I took a one original symbol model by Jon from Printables and put in into my original Omamori Happiness Plate. The Omamori…
Wydruk około 2,55 €–3,12 € nettoWstępna wycena jednego wariantu
J'ai créé cette lampe led Ananas en me servant du tutoriel de @LeLabodeKiko_262217. J'ai téléchargé l'image d'ananas depuis le site vecteezy , puis je l'ai transformé en fichier vectoriel .svg que j'ai retravaillé dans Fusion 360. Le…
Wydruk około 0,25 €–0,30 € nettoWstępna wycena jednego wariantu
I didn't like the factory tool holding clip, so I designed this small wrench holder to fit on the lower front. It mount to both sides with the back mount fitted, but only the opposite side with Front Mount due to limited clearance. To…
Wydruk około 2,87 €–3,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Spring Festival stickers. The meaning is “Good fortune & Happiness” Print in 2 pieces. Able to scale up to 150% on my mk3. PLA 20% infill, 0.3mm. Brim is not required, but will help minimize wrapping if added.
Wydruk około 0,78 €–0,95 € nettoWstępna wycena jednego wariantu
100x160mm sign, featuring pineapple art. Mesh and Solid models provided. Best with color switch above 1mm, as with included gcode file for the mesh version. Also see the Shadowbox Frames, into which this and the rest of my sign collection…
Wydruk około 1,65 €–2,01 € nettoWstępna wycena jednego wariantu
Apple Watch - Alpine style band buckle lock
Wydruk około 0,05 €–0,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Original model was modified for magnets 6x2 mm. The inscription has been changed to TS101. https://www.prusa3d.com/cs/produkt/ts100-101-soldering-adapter-tips-set/…
Wydruk około 3,62 €–4,42 € nettoWstępna wycena jednego wariantu
Porcupine-themed pencil holder. The 3 holes are sized to hold larger diameter markers such as Sharpies. The quills came out flexible and are more like bristles (i.e. not sharp). I printed it with PLA-based organic supports, which take a…
Wydruk około 24,31 €–29,71 € nettoWstępna wycena jednego wariantu
alpine climbing adventure fitness logo
Wydruk około 1,69 €–2,07 € nettoWstępna wycena jednego wariantu
Recordings (2001) I woke up and I had a big idea To buy a new soul at the start of every year I love Steven Wilson and Porcupine Tree's music, so I created a set of 3D printable abstractions to represent his discography. These Porcupine…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena jednego wariantu
This is a remixed version of Abby575 's amazing design. This remix simply changes the designs of the cutouts in some of the panels as well as reduces the radius on the corners of the pieces to reduce gaps at the joints of multiple panels.…
The Spine chain was made popular by @rogerquin_304616 when he designed it for the SOVOL SV06 . This is my version for the Anycubic Kobra 2 Series printers. This is my original work and drawings all inspiration for this design goes to…
This cable chain ( SPINE ) supports the extruder ribbon cable on the Sovol SV06 3d printer and stops it from sagging on taller prints. There are three special pieces for the ends of the spine. Refer to the pictures for correct placement,…
A truly original pen stand that will stand out on your desk. The model of the pen and pencil holder can be printed in one unit (spine_pen_holder.stl). I recommend using organic supports. You can also print the model in two parts and then…
Clamp and Spine Cable remixed into one.
This is my take on a spine style cable chain for the Ender 3 V3 KE/SE. I was going for a very specific "look," and I think I've achieved it. I've designed components for all the various mounting points. There are three mounts for the main…
After setting up my Neptune 4 Plus I thought it was a pretty big shame that there was no cable management. It just looks sloppy. Looking at marketing material there is nothing done to spruce up the look. Always thought this chain has a…
Remixed the original large Pinecil case to be printed in multiple parts/materials. Reason: because it looks good.;) Tolerance between the outer and inner parts is 0.1 so it should fit nice. Glue the inner to the outer parts. Be sure to…
Spine cable support link - for those that printed spine chain on both sides of the cable.
Printed in PETG 0.2 layer height 4 walls 30% infill Supports - on build plate only
Keep your sweets in a fitting container! Or your other stuff - you can't go wrong with a pineapple container. It's a simple print, no supports needed. Just print a pineapple (smooth or with spikes) and a lid - that's it! It's also no…
Doubled the thickness of the base so that it can fit a second insert, and therefore all 7 tips
This is a Remix of the tree stump model by Robagon here: https://www.printables.com/prints/12116-stump-for-gloomhaven and the Pinecone by jjp12383 here: https://www.thingiverse.com/thing:3076993 These are fun little upgraded tokens for…
-Uses six M3x20 screws for the hinges and latch. -Uses two 3mm x 1mm magnets for the small parts storage compartment (optional). Storage for: 1 x Pinecil (TS100/TS101 BETA versions still testing) 7 x Short Tips (6 x Tips for TS100/TS101…
This is a remix of another Pinecil Case adapted to contain the Pinecil, the official cable, the official mini stand and 4 short tips. This case is smaller than the original model because only compatible with the Short Tips. The hinges are…
This is my Gridfinity-compatible Pinecil holder with storage for 5 tips and a lid. Made using this Gridfinity Add-in for Fusion 360. The bins have little grooves on the inside, so the lid snaps in place and stays on. The V24 version has…
Accurate reproduction of the human spine, with support base for exposure. Instructions Printed parts can be assembled without using glue. The plate can be personalized by attaching a sticker. Category: Biology
I wanted something beautiful to somehow hide the stepper motor there. I combined and put the cable as high as I wanted from the beginning to have a smoother curve, without disturbing anywhere else and more good position for cable chain .…
Geometric pineapple to use as a vase or planter. available in 2 sizes, 100mm and 130mm height
Introducing the ultimate hunt, the Slaughterspine from Horizon Forbidden West! This machine is to scale with the official board game and stands on a 120mm base. It has been split into a few, easily printed parts that come together without…
This took a while, but I believe it's done now, A complete Spine Chain Kit for Ender 3 V2, with a sprite pro upgrade. There are multiple variants for the link's, and mounts, depending on how much movement you want. Be reminded that if you…
A very nice Sponge Bob's pineapple house for fishes to live in. I made it as accurate as possible to replicate the same house shown in the cartoon, but I'm hoping that fish won't get lost in there. Should be printed in Orange/Green, but I…
I was practicing using the form tool in Fusion 360 and was able to come up with this beautiful vase and wanted to make it available for all to enjoy. Support me on Patreon: Print instructions Make sure to select vase mode in your slicer…
The "Frosted Pine" Vase embodies the serene elegance of winter, bringing a touch of festive charm to your home. Its rich emerald hue and intricately detailed pattern, inspired by pine branches, evoke the freshness of a forest dusted with…
MyInfiniteNotebook V2 A new version of my modular notebook system https://www.printables.com/model/1760740-my-infinite-notebook redesigned with a lightweight hexagonal cover structure. The V2 introduces a customizable cover, reducing…
Pine64 Pinecil flip case. Two neodymium magnets 12x2mm required, to hold the lid in closed position. No supports needed for the print.
This a remix of another cable chain by Nora. It is far from perfect (it is my second model designed and uploaded ever). I had great success printing it at 250mms with fast pla. You will need support for the “ tip” of the spine but not for…
Update! While I have internet connection, I'm uploading an updated, modified, and tested version. All credit goes to @Zahg ! Huge thanks for this! =========================================== Original case needs some adjustments. Check out…
Flexi Baby Pineapple is a fun fidget toy that can be used as a small container.
Rethink of the original “hotend_clip.stl” that is one of the 5 models in “Give your Elegoo Neptune 4 Plus/Max a spine, a cable chain spine” by edl (me). This remix provides additional support for the connection point between the hot end…
Für das Kabel des GSensors. Zum sauberen Durchführen nach hinten. Kompatibilität zu SE und KE Ihr benötigt 1 weiteres Teil: Ender 3 V3 SE Spine cable Clamp to Spine by @ Adrian@3DPrintMasters Für die komplette Verkleidung benötigt Ihr…
made this to be able to connect the cable spine to the cable chain on the neptune 4 I made a remix of the z mount for neptune plus and max. https://www.printables.com/model/695466-cablechain-z-axis-mount-for-neptune-4-plusmax and the rest…
Saw different versions of the stand and decided to combine a few ideas and create a new version: Reinforced Stability: Thickened the stand's design, ensuring it remains securely in place. Effortless Removal: Added grip makes detaching the…
The already amazing spine by edl had oval “heads” and some range of motion limited by lines. I wanted to make the balls spherical, increase the range of motion, and provide some directional and sizing options for the spine. This…
Print both files from this model, the rest of the files can be used from the original model. If you have any question, feel free to contact me.
Have you ever wanted to hold a human spine in your hands? (without dissecting any corpses?) I present to you... SPINE This is a flexible spine model I made for my chiropractor friend. It doesn't have any purpose aside from just being fun…
3D model oh a human lumbar vetebrae
Originally posted here: Pineapple planter by tato_713 - Thingiverse . Designed using MATLAB R2016a making a "topographic map" of a pineapple using sine functions. It is a planter with the shape of a pineapple that can hold small plants.…
Remixed the two cases together for a watertight, more rugged option. Modified to suit 2m cable instead of 1.5m in the original, and hold the pine64 pinecil mini stand. (use VHB). Pics to follow soon Also added different options (bottom…
VIDEO: Are you interested in 3D printing CT scan data using free software? Check out the linked video to see how I made it, then follow the links below to make your own! For this model, I segmented the spine and printed the model using…
Perfect for Geocaching, fits a log sheet easily and has thick walls. Print with at least two walls, if you have it Wood Pla gives a good look (is a little more brittle), but any material will work! Pla Plus will work better than Regular…
I put this bundle together of all the pieces I printed out for my Neptune 4 Plus cable chain
Updated 01/28/2024, 28/01/2024 for the rest of the world. I saw a few comments stating that the mounting/starting chain link was causing collision issues with the side of the printer. I went ahead and made some minor changes to the model…
This is a remix of the excellent cable chain for the Sovol SV06 made by rogerquin ( https://www.printables.com/model/447467-cable-chain-spine-for-sovol-sv06-3d-printer-extrud ). To make the chain flex smoothly, I used blender to scale…
https://stllink.pages.dev/
I created this pineapple keychain for my sister. I printed this in some yellow and green pla, I paused the print where the yellow part needed to stop and changed the filament to green and resumed the print.
I bought a Pinecil v2 to replace my trusty Ersa Tip 260 as it became bulky and unwieldy. Especially when I just need to solder 4 wires to a ESP32 that will get stuffed in a tiny 3D printed enclosure. As I wanted to dip my feet into…
A recreation of the BSA Pinewood derby wheel for printing or use in car mockups
3D Printed Cable Management Spine Many Standing desks suffer from poor cable management due to all the cables having to be twice as long to support the desk moving up and down. Initially, I used some cable management sleeves to bundle the…
Print using your normal profile, support-free
This model has some flaws (see the Makes & Comments section). Unfortunately, I'm not going to fix them as I no longer use Pinecil
Print two models (pine cone + holder) and glue them together. Pine cone i recommend print in vase mode.
Printed in PETG 0.2 layer height 4 walls 30% infill Supports - on build plate only
Second set of spine models for the Elegoo Neptune 4 Plus/Max. This is to complete your printer if you have already printed “Give your Elegoo Neptune 4 Plus/Max a spine, a cable chain spine” also by edl. Print these 3 new models and have…
I took the Pinecil/TS100 Top Large B insert from the original case and modified it to hold the CNC Kitchen Heatset tool and tips. I also changed the stand holder to be easier to remove by pressing on the base.
![Conversion kit for the Spine cable chain for the SV07 & SV07 Plus [Fixed]](https://media.printables.com/media/prints/602642/images/4795554_3c8b74be-3e7a-40f7-82f2-7985236209f0_f71f2402-dfc7-4936-b991-5c3a62342dc2/20231003_230737.jpg)
