3315 modeli
Made this stencil to create a checklist on a post-it (or sticky) note pad. The stencil surrounds the notepad to prevent it from sliding around, and can also be used as a base to go underneath for safe keeping.
Hello I made this model to promote sustainability and to prove that you can live more ecologically even in a small flat or without fancy equipment. It's a Vermicomposter/normal-composter printable on a Prusa i3 with a maximum size in…
This two part lightweight and simple model is ideal for 22" x 28" (550x700mm) Poster Paper you can find at your local hobby store although any size will work OR standard printer paper ! Whether you are shooting 3D model pictures on your…
This is a Hot Wheels / Matchbox 1:43 scale model of a 4-post car lift for displaying different size diecast cars. These snap together so you don't have to worry about extra hardware or glue. I've added added a wheel chock near the front…
I've started planting bird feeders around my neighborhood, ensuring they're all stocked up with seeds because winter is coming. My design should be able to snap on most US street U channel posts . Wanna help? This model is made of 2 parts…
Bollard key with longer handle and triangular insert. For more comfortable use on bollards with jammed mechanism. Print in PETG or ABS for good durability. Thanks to rflrkn for pointing out that the initial print file had too few infill.…
🇪🇸 ¡Bienvenidos a Santiago de Compostela! This model was created in collaboration with 3D artist Marc Mons . NOTE - This model cannot be sold physically or digitally, even if you are a subscriber of the MiniWorld Reseller License tier. It…
Wydruk około 2,09 €–2,55 € nettoWstępna wycena jednego wariantu
Hello! Forgot to add the boot/cap/cover to your RJ-45 cable and you crimped it already? been there, done that. Hope this helps. This is a work in progress (W.I.P.) as it's not the easiest print using FDM printers, yet. Update 2022-09-07…
Update August 26, 2022 : Added files for larger diameter (50mm) Dremel 4000 and similar. See print instructions for more details. Update August 29, 2022 : Although the files in the above update work, I decided that some minor improvements…
This print is a remix of a frog sculpture I found here: https://www.myminifactory.com/object/3d-print-frog-sculpture-3d-scan-59240 I scaled the original by 50%, and created an opening in the inside to hold a postage stamp roll, with an…
sněhulák se tiskne na více částí, vše se vejde na jeden výtisk. Ruce doporučuji tisknout s límcem
Updates 19-04-2023: First upload Usage Having a small vermicomposter can bring many benefits to your home. First and foremost, it's an eco-friendly way to dispose of food waste. Instead of throwing away scraps, you can feed them to the…
Photo / Postcard Clip Make a quick and easy photo and/or postcard collage with only a piece of string and those litte clips ! You can print them in minutes! I strongly suggest not to make them out of PLA but from PETG / ABS. This is…
Holder for 76x76mm post-it notes. Prints in two separate parts.
Držák papírových postaviček pro mé inserty do hry Karak. Určeno pro nové 20 mm stojánky postaviček (2. vydání a rozšíření hry už mají tyto stojánky):…
It's spring ! Time to sprout plants for your garden ! This small press allows you make compostable pots out of cardboard in which you can sprout your seeds. Once enough grown, simply plant the whole thing in your garden. No more plastic,…
This is an indicator holder for use on a lathe with and AXA toolpost. As the title indicates, this is one of several versions so pick the one you like - or make your own improved version! Similar holders have been made by others before,…
Scale in almost any size you like and slice so that it starts in black then changes to white and then orenge then red. remix into a magnet or blow up to 30 inches high your choice. Display it somewhere prominently to make alien diplomats…
Wydruk około 2,41 €–2,94 € nettoWstępna wycena jednego wariantu
This is an indicator holder for use on a lathe with and AXA toolpost. As the title indicates, this is one of several versions so pick the one you like - or make your own improved version! Similar holders have been made by others before,…
My first model! Still learning FreeCAD This holds a Dial Indicator in my lathe's quick-change toolpost. I chose PETG 0.20mm because it's sufficient. And I have mostly PETG, but it should work in other materials. The model is upright…
A holder for postcards for the Ikea Skids board. Designed to hold DIN A6 postcards. Needs supports.
Each slot fits ~20 postcards with width up to 15 cm. Fits MINI plate (with disabled skirt). Print tips: Print with supports is recommended, see attached 3MF / gcode which include configured supports. Layer height 0.2 Support style: Snug…
So far happy with the looks and takes about 55mins on the mk4 @ .2mm Speed setting. Not sure how the color will hold up but thinking that I can paint them if the sun bleaches them too much.
Check out my other postcap designs: https://www.printables.com/de/social/256636-seemomster/collections/185470 At the moment the octopus post cap is availabel for posts with a diameter of 16.5, 18.5, 22, 34.5, 38.5, 40.5, 42.5, 48.5, 60.5…
Wydruk około 2,76 €–3,37 € nettoWstępna wycena jednego wariantu
Postava Santa Clause Tisknuto s MMU2S Výška tisku 2mm
Layer Height 0.2mm. Perimeters 2. Infill 15%. No need for supports.
Hello, I have an Alza dummy for you. An amazing character based on the Alza e-shop model. This is free inspiration. My kids love the character :-). It uses very little material. Good luck with the printing! I used PLA/PETG as the…
The is dial indicator holder that mounts to magnetic base/post. I use it to measure movement on my cross slide carriage on a lathe/mill. Accepts a dial indicator with a 3/8 dia mounting stem. Required (2) 10-24 x ½ nylon screws. Printer:…
the jolly boys outing poster 0.2 layer height only 2 colours yellow 3.40 black 3.40 - 4.40 15% infill
V rozšiřující sadě nebyl tento plastový stojánek přiložen, dílky nalezené na webu mi nevyhovovaly pro svou křehkost. Tento je vytvořen tak, aby se nemohl snadno zlomit. Čelisti mají lehké zoubky, figurka tak dobře drží, přičemž jde snadno…
Save a trip to post office and weigh your envelopes and Christmas cards at home. This design has the 1 & 2 ounce weights engraved. However, I would suggest that you make up a test articles to verify the accuracy. The beauty of this design…
This model is large in order for it to fit money in it at original size it is very large while printable at that size it can be printed at half scale (no smaller or larger coins such as the 50p wont fit). The attached model files are at…
Nástroj pre demontáž a montáž hlavy postrekovačov Hunter PGJ. Hunter PGJ spray head disassembly and assembly tool.
Wydruk około 4,38 €–5,36 € nettoWstępna wycena jednego wariantu
Elegant stand to present some postcards to take them away for free.
Remix of mrgimmeone's fleur de lis model on thingiverse for use as a bedpost finial. The threaded base accepts a 5/16 lag screw that attaches to the bed, then the finial screws onto it. Print instructions Category: Decor Summary Remix of…
A shim for your bike allowing you to fit a 27.2 seat post in your 30.9 seat tube. Suitable for all kinds of bikes, seat posts and materials. Please contact me if you want different sizes. Made on a PRUSA MINI+ using PETG filament.
Wydruk około 1,13 €–1,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is an indicator holder for use on a lathe with and AXA toolpost. As the title indicates, this is one of several versions so pick the one you like - or make your own improved version! Similar holders have been made by others before,…
A shim for your bike allowing you to fit a 27.2 seat post in your 30.9 seat tube. Suitable for all kinds of bikes, seat posts and materials. Please contact me if you want different sizes. Made on a PRUSA MINI+ using PETG filament.
Wydruk około 1,01 €–1,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The cap from the gate post around the pool disappeared. This is a quick fix until a more intricate one can be designed. I wanted this to be as quick as possible so I changed all the speeds to at least 70mm/s. Thoughts?
Wydruk około 0,29 €–0,36 € nettoWstępna wycena jednego wariantu
It's spring ! Time to sprout plants for your garden ! This small press allows you make compostable pots out of cardboard in which you can sprout your seeds. Once enough grown, simply plant the whole thing in your garden. No more plastic,…
This model is a replacement part for the Arrma Vorteks Body posts, includes Fusion 360 models and sliced gcode for CoreOne and Mk3S. AR320357
This model is a set two hinges made to fit with a wood composter with 2 half covers and 45x45 mm frame. It is composed by 4 printable parts for left / right and male / female hinge. Each part are marked Left M, Left F, Right M, Right F on…
Decorative covering for the bottom of a mailbox post. This was designed to fit around a metal post that was designed to attach to a 4x4 buried in the ground. Pretty commonly found at Home Depot and Lowes. Serves 3 purposes: Adds a little…
Prusa Enclosure is super, but I don't like the filament guidance in the long tube directly into the extruder because of the color change and the end of the spool. I tried this -…
Earthworm for vermicomposting with kids at classroom.
This is a replacement for the Frigidaire 318242275 (Electrolux ICON) stovetop knob bases. Although the part you grab is metal, the base is plastic, and the knob post that connects to the stovetop often cracks at some point, and then the…
Držák na 15 postaviček (vhodné pro majitele patnácté bonusové promo postavy Dariuse). Navíc lze vložit postavičky jak se starým podstavcem 18 mm, tak i s novým 20 mm (pro ty, kteří jako já měli v původní hře stojánky 18 mm a v rozšíření…
This postcard stop prevents your postcards from sliding between the wall and the rack or from falling down completely. It's compatible with Ikea Tjusig coat rack. Dimensions of one part: 170 mm x 32 mm, front edge: 3 mm above the rest of…
EN - Magnetic label in czech/slovak language, on the post box - to prevent adverisement. Magnets could be inserted from the bottom, could be fixed with glue. CZ - Magneticka cedulka na postovu schranku - bez reklamy. Magnety sa daju…
Podstavec pro mlýnek na sůl a pepř ETA ( https://www.eta.cz/shop/mlynek-na-sul-a-pepr-eta-molino-0928-90000-bily-eta092890000/p586445/ ). Násypka pro pohodlnější plnění mlýnků. Tištěno na PETG od Průši, násypka tištěna bez podpěr (ale…
Stromer bikes use a special aluminum seat post adapter that has a beveled collar on the top edge (the last of the photo shows the original part). This beveled collar could also be used as a taillight. The idea came from one of the…
With my Ender 5 i had the problem, that retracting a lot on one spot of the filament, led to grinding down the filament or rolling it flat, which results in a failed print, because the extruder can't extrude filament anymore. If you have…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
K balanční hře je nutné vytisknout větší počet postav.
Hello, Today I have Valentine's Day Heart Figures for you. They are suitable for lovers as a gift or decoration. The hearts are cut in half and need to be glued together. The figures and hearts print well even on basic settings. Good luck…
The pocket of our cabinet is too small and made it so the compost caddy couldn't seat into the mount . This is a simple 5mm shim that sits behind the metal plate that is screwed into the cabinet to add more clearance to the mount.
Wydruk około 0,44 €–0,53 € nettoWstępna wycena jednego wariantu
Školáci 4.-5. tříd základní školy, pomocí jednoduchých geometrických tvarů a základních funkcí jako jsou zarovnání a duplikování vytvoří model postavy anděla, kterou následně vytisknou.
Can be used to mount the PostTV decoder (Post Luxembourg) to a wall or below a furniture. May be used for any 12x12x3 cm device. Use e.g three 4.0x25mm screws to mount. I used PETG to print, but PLA should be fine too Print with supports…
Among us crewmates don't have a consistent style, and of all the models that I found, non of them was spot on what I had in mind when I think about the Among us crewmates. So I decided to make my own. At first I wanted to make a realistic…
I took a game model and posed it in blender. Supports are a pain, and the hat is really thin. BE CAREFUL. I think I used 30 or 40 percent infill. Enough to be solid on thin parts but not ridiculous. There are some modeling errors, but…
This is a Hot Wheels / Matchbox 1:64 scale model of a 4-post car lift for displaying different size diecast cars. This is a remix of EG3Dprinting's 1:24 scale for Hot Wheels 1:64 scale. These snap together so you don't have to worry about…
UPDATE : I have now added a version of the model with no magnet holes in the base. This will save you circa 15 minutes of print time a couple of grams of filament. If you don't need magnet holes (As I expect most dont), then the…
Want to elevate your photo's of your recent projects? This simple seamless background support is to be used with your normal poster board that you find at your local dollar store or walmarts of the world to create a clean and simple…
I noticed that sticky note boxes usually lack a lid design. To enhance portability, I designed an integrated lid that not only provides a new option but also makes carrying and storing sticky notes more convenient, while also…
Oni Cyber Punk Mask by SeanAranda From Thingiverse. Posted here due to Thingiverse losing popularity and Creator being MIA for over a year. I have also added the remixed version that is preassembled. A brilliant design i wanted to share…
This is a scale model of a 4-post car lift for displaying different size diecast cars. This is an updated version of a previous model of mine but instead of using M3 fasteners to put it together, I made the tray and posts fit with a…
Remixed from a variety of sources. See links below. I scaled and modified each model to work with my universal post adapter. Print a universal post adapter for each model and glue the dovetail joint before painting. The paint and primer I…
A very simple holder for 76mm square Post-it notes or Sticky notes. Print instructions A very simple and straightforward print. Printed in PLA.
Model is made for 76 x 76 mm sticky notes. A multifunctional sticky note / Post-it holder designed for desk organization, note taking, and everyday planning. The holder stores standard adhesive sticky notes while also providing several…
Self remix update 2025/04/24 https://www.printables.com/model/1274183-seatpost-mount-bike-storage-tool-box-easy-edit Here is Version 3. Designed for my bike,Specialized Venge. Gopro style mount,available to use almost all Aero road…
Christmas day Steering wheel + BONUS Check our models, you will find there Christmas bonus. Stay in contact with us. From 25.12. a special competition on facebook with a photos of formula prints . Facebook:…
Stuff you'll need: 1x Garmin insert (I took the one that came in the box, remove and keep the 2x M3 screws) 2x M4x8 SHCS such as these - https://boltdepot.com/Product-Details?product=6392 Start by screwing the printed model onto the…
Stencil with 7 lines and boxes for square and wide post-it notes 3 inch x 3 inch and 5 inch x 3 inch Changelog: 2023.09.08: Added a version with wider holes for wider pens.
I did not modify the tongue so you can get it from the original model
Remix of the Prusacaster. The core has been modified to accept an Amazon Tele kit. I filled in the hexagons to create pockets to pour epoxy into. I also added slot for square nuts to attach guitar strap posts. ☑ Build and Demo Video ☑ ☑…
Minecraft postel Koukněte i na mé další modely . Pokud mě chcete podpořit, můžete zde: PayPal , BuyMeACofee , QRCode . Děkuji
Gridfinity compatible Post-it note holder.
I made some additional updated on TheBasedDoge's vehicle lift. Those changes include: Upgraded tray pieces to make it easier to fasten screws Upgraded post piece to make it easier to fasten screws Made it so at 1:18 scale you can use M3…
At the moment the LEGO flower post cap is availabel for posts with a diameter of 27.5, 34.5, 42.5, 48.5 and 60.5 mm. But if none of them fits your post it is very simple to scale it. Instructions are below. Check out my other postcap…
Simple 4 Post Lift for R/C Cars. The main tray is split in half to fit on the print bed, attaches with 4 bolts and holds up 1/10 scale RC cars.
Elegoo Centauri Carbon (new batch with slot and screw design). Offset the runout sensor to center of spool. Replace original center screw with m3x30
Rear and front body post in different lengths for Tamiya TT02. When I completly finish scad file, I will put it here. So you can then create your own variation. 4.7.2025 : added custom lenght (hcl22.5) variant as requested (This 3D model…
Added Three Layer STL's of each letter which can be joined in slicer or Tinkercad - the UPPER CASE letters are in a separate Post There are two(2) postings of this font face: Lower Case - Letters that can be attached 2. Cap Letters to be…
I thought it would be cool to have a modular case for Post-It notes which can sit on a desk at a couple angles and allow for new printed stencil plates whenever desired. About this model: This is designed to fit a standard 3" Post-It note…
A display board for your enamel pin collection. The board is sized to fit single and multi-post pins, so you can arrange your collection on a desk or wall. It is a bit oversized on purpose: scale it down in your slicer to fit your…
Deutsche Version der Gingerbread House Kit Card mit “Frohe Weihnachten” Lässt sich in 0,2mm PLA wunderbar drucken. Mit dem Prusa MK4 passen die Teile sehr gut ineinander und lassen sich auch ohne Zange leicht aus dem Rahmen lösen. Vor den…
Currently the following sizes are available (notes size / max. block height): 90x90 mm / 95 mm 90x90 mm / 45 mm 85x85 mm / 45 mm 83x83 mm / 80 mm 83x83 mm / 45 mm Contact me in the comments section if you need a different size. Printing…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Photo taken from Luffy's first Wanted poster. The model can be scaled to the size you want to print. You will find multiple files, the first is the plain one with no background, while the second has a back border for pasting a background…
Here is my Boba Fresh/Re Armoured/Post Sarlacc Helmet. It's designed on the Side show helmet with the smaller turn signals. It is sized quite small at 100% so i'd suggest going to 103-105 for a normal sized head and 108 for larger sized…
Here's a tiny pergola for your climbing plants! Provide succulent shade for your succulents! This version prints faster than my original model because the four corner posts print horizontally instead of vertically, and that means that the…
I saw in some crafty shop these stencils at a ridiculous price, not that I needed or wanted them but I thought I'd make my own and share if anyone else did and not pay stupid amounts of ridiculous money! The stencil when printed sits over…
I simple Post it note holder with pen holder. An optional line and bullet point stencil is included if you wish to print. Fits 76mm x 76mm Post it notes. PRINT SETTINGS LAYER - 0.1mm TO 0.2mm Infil 15% Gyroid No supports
I didnt make the double post. if someone need it just comment here and ill make it.
Mini Poster Themed from Fallout Series - Don't Lose Your Head I Suggest to print in Yellow Matte and Beige; For this project i used Yellow and White. Share your makes and leave a comment!…
Author : Longquang Thanks to Longquang for sharing ;)
Outpost 42 is a terrain piece that can be used as an aesthetic or as part of a scenario. Support: Outpost42_Railgun.stl Communications Dish_Outpost42_Arm.stl Recommended to print with bottom side towards buildplate and “support on…
This winder is a little more Versatile than other iterations, subjectively. It uses M5x0.8 Threads to allow each dipole post more secure into the winder. SO239, space for a T140-43 or smaller Toroid for a Choke. Pictured is the dipole as…
Minimalist Garmin Varia seat post mount for Canyon Ultimate (2024) D-shaped seatpost The seat post should be printed in ABS or another semi-flexible material Required hardware: 2x threaded heat set insert M3 x 5 x 4mm (Voron standard…
⚫SKARO DALEK⚫ I decided to update this model and redo it from the ground up. I wanted it to be more accurate and colorful and completely without supports. I think it turned out beautifully! More Daleks updates coming every Saturday! And…
![Doctor Who - Post Time War Dalek [2012] ★SKARO DALEK★](https://media.printables.com/media/prints/75799/images/7871489_a41a8051-5d2e-4fd8-99e1-5c8b16749666_987f6701-daaf-43a1-8701-4326e696a9f1/gg1.png)