Wyniki wyszukiwania: protectors

Sortowanie

235 modeli

P
PrintablesKlaus

Bodenschoner für Biertisch / Festzeltgarnitur (floor protectors for folding table)

Bodenschoner für Festzeltgarnituren mit einer Breite von 30m. Zur Befestigung können Kabelbinder bis zu einer breite von 8mm genutzt werden. Je nach Anforderung kann der Bodenschoner direkt verwendet werden (z.B. um Steinböden zu…

Wydruk około 2,00 €–2,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
700
Polubienia
39
Ocena
5
P
PrintablesBorderbox

Cable Management Box V2 • Cantilever Clip Fasteners • Fits 12.2"x5"x1.29" Surge Protectors

Updated v1 box with v2 cantilever clips and included more sizes which can be found here --→ https://www.printables.com/model/146721-cable-management-box Cable management box to store surge protectors and tidy up cables. Now with…

Pobrania
932
Polubienia
186
Ocena
4,9
P
PrintablesM1324

PLA Oculus Quest 2 Controller Cover Protectors

This is a remix from https://www.thingiverse.com/thing:4745565 (by Hodgepodge_Foxe). Thanks to Hodgepodge_Foxe for providing the f3d files: "Somewhere up in the 3d printing heavens, there is a choir of angels 2000 deep singing praise to…

Pobrania
926
Polubienia
117
Ocena
4,2
P
PrintablesChristian Piper

Pool Cue Joint Protectors - 5/16-18

Model can be printed with basic settings, such as 3 perimeters / 20% gyroid infill. Settings don't really matter. Make sure that you have the same thread type… 3/8" also exists If you'd like the reinforced female joint protector, you'll…

Pobrania
699
Polubienia
42
Ocena
2

Milwaukee Track saw rail end protectors

Just a simple design to protect the ends of my track saw rails I got for Christmas. They slip on the end and are long enough to cover a new zero clearance rubber edge. Recommend PLA for a little flexibility in the model as it should be a…

Pobrania
699
Polubienia
92
Ocena
4,75
P
Printablesthall72
Pobrania
579
Polubienia
55
Ocena
4
P
PrintablesHOR

Cover for Insta360 X3 with lens protectors

Insta360x3 camera can have lens covers installed, which makes wery difficult to use stock silicone lens protector. It also slides right over the lenses, so there's a risk of scratching them. This protector has a little space between…

Pobrania
527
Polubienia
67
Ocena
5
P
PrintablesQel tlhaw DIyuS

Speedybee Mario 5 side protectors

Side protectors designed to work with the SpeedyBee Mario 5 XH frame. Only tested with the XH frame, may also work with deadcat frame.

Pobrania
497
Polubienia
27
Ocena
5
P
PrintablesTotallyAddicted

Pencil Caps (Lead Protectors)

UPDATE 11/6/2018: Thanks to a suggestion in the comments, I uploaded a second version that has a hole in the top in case your lead breaks or falls off while in the cap and you can't get it out. I was inspired to design this pencil cap…

Pobrania
427
Polubienia
37
Ocena
5
P
Printablesbstolk

Knipex pliers wrench jaw protectors (250mm)

Slide-on jaw protectors for the excellent Knipex 250mm wrench pliers. According to Sergey, also works on 180mm pliers when scaled at 86%. Although there are already some 3D-print models around, this was mainly a small project for myself:…

Pobrania
427
Polubienia
62
Ocena
5
P
Printableswerz 99

Knipex Jaw Protectors

Jaw Protectors for Knipex 86 XX 250 and 86 xx 150. Print in TPU or PETG or even PLA. A little more flexible material may last longer. Update 29.3.2024: Added Fusion360 drawing on users request. Print Settings Printer Brand: Prusa Printer:…

Pobrania
416
Polubienia
74
Ocena
4,8
P
PrintablesRainer

Knipex Cobra 300 Schonbacken jaw protectors

Schonbacken für die Knipex Cobra 300 Rohrzange. Am besten in TPU drucken.

Pobrania
376
Polubienia
64
Ocena
5
P
PrintablesDaniel Schultze

Xbox Controller Thumbstick protectors

Extremely simple grippers/protectors for Xbox controllers. Works on Xbox One and series x controllers. Haven't tested with PS controllers so can't guarantee the fitment. Print in TPU or similar flex filament. Print smoot or with fuzzy…

Pobrania
342
Polubienia
65
Ocena
3,5
P
PrintablesMatt Loveday

Various Bolt Protectors

Bolt protector for rifle bolt

Pobrania
332
Polubienia
8
Ocena
0
P
Printablesmmackowiak

Knipex Jaw Protectors/Covers with Clips

Original design had very nice fit, but when printed with rigid material (ABS in my case), jaw protectors/covers were detaching very easily. I added retaining clips to both pieces, so they stay in place. Fits 150 mm Knipex pliers (86 XX…

Pobrania
326
Polubienia
54
Ocena
5
P
Printablesgrizzie17

Gimbal Protectors for Radiomaster TX16S

Gimbal Protector for the Radiomaster TX16S I have larger Gimbal Stick-Ends than the stock stick-ends. I wanted a Gimbal Protector that would fit over those but also fit in the Radiomaster TX16S case (the one that comes with the…

Pobrania
321
Polubienia
17
Ocena
4
P
PrintablesEgghebrecht

Decorative book corner protectors

Book corners based on reversed fleur de lys symbol Both a version with fake rivet studs to be glued on the book and one with holes for real rivets available. remixed from https://www.thingiverse.com/thing:652068 Category: Decor

Pobrania
288
Polubienia
73
Ocena
5
P
PrintablesOutpost Kodelia

Pinball Cabinet Leg Protectors

These leg protectors are much like the ones you would buy online or print from other 3D models, but with a few extra perks. These should be universally compatible with any standard pinball cabinet. First, these are designed to print flat,…

Pobrania
278
Polubienia
28
Ocena
5
P
PrintablesMartin

FPV Motor Wire Protectors - Various Lengths

Simple yet effective motor wire protectors. The protectors sit on top of your motor wires and are secured to the arm of your quad with two zip ties. This saves weight and allows for easier maintenance than wire protectors which go all…

Pobrania
272
Polubienia
25
Ocena
0
P
PrintablesKrhom

Bando Arm Protectors for the Apex/Apex Evo

Print 2 normal and 2 mirrored. Prefer using SHCS screws to really lock the TPU from sliding out. With those, I've yet to lose one!

Pobrania
262
Polubienia
15
Ocena
5
P
PrintablesGeorge-Corrigan

Pinball - Glass Corner Protectors

These are corner protectors for sheet glass, specifically pinball machine playfield glass. There is a single model and a model with 4 pieces and connecting supports (to be trimmed apart later). -- This is printed on its bottom with no…

Pobrania
260
Polubienia
28
Ocena
5
P
PrintablesFeistyLemur

TBS Source One V5 Wire Protectors

Yep, it's a blatant rip off of the plastic protectors that come with the Apex. But they're pretty awesome and the whole frame's a rip off so why not. You can print them laying down if you want, but you will need supports. I printed all…

Pobrania
255
Polubienia
29
Ocena
0
P
PrintablesLayerShare

Motorcycle Crash Bar Sliders Protectors

A protector to wrap around a 27mm crash bar, such as that made by Outback Motortrek , It's cheaper, and cleaner, to replace these rather than cope with a scratched frame. The front is curved to resist snagging. The rear is more open to…

Pobrania
249
Polubienia
50
Ocena
5
P
PrintablesJocke Selin

Fork Protectors to fit Honda MSX-125 Grom

When you fit a high mudguard / fender on the Honda MSX-125 Grom, you expose the lower fork legs by removing the original mudguard which doubles as a protector. You can use the Honda Monkey 125 fork protectors but they are quite expensive…

Pobrania
221
Polubienia
21
Ocena
0
P
PrintablesAlex

DJI RC Recessed Stick Protectors

I took the idea from another creator i saw on here. The thing I didn't like was that their design didn't sit within the recess of the controller, therefor the sticks could still move. So I redesigned them to fit my needs. I assume it…

Pobrania
193
Polubienia
25
Ocena
4,67
P
PrintablesNatmang

Suzuki Bandit Fork Protectors

I did not create this just felt it was a really good model worth sharing. Created by Sky_Lips on thingiverse

Pobrania
188
Polubienia
25
Ocena
0
P
PrintablesPistonPin

Rim protectors (17"/18") for changing tyres

I needed to remove the tyre from the rim of my NSR50 project and didn't want to damage it any more than it already is, so I designed these rim protectors. Note: The NSR's rims are pretty skinny, so I've included a small test piece so that…

Pobrania
183
Polubienia
17
Ocena
5
P
PrintablesJason Englert

Dust/debris gutter protectors - Unibody, no magnets, lip.

These prevent the little bits if plastic from getting into the crevices under the side panels. I slimmed down dancan13f's unibody models, removed the magnets, and added a lip and removal lever. Split into objects, flip them on their backs…

Pobrania
178
Polubienia
22
Ocena
4,89

Funwheel X7 &X10 Railguards/protectors

I couldnt find any rail guards that I liked so I designed my own. I printed them on the surface facing the rail. they will require support, as I matched the underside of the protector to the profile of the rail. I printed them out of 95A…

Pobrania
178
Polubienia
15
Ocena
5
P
Printablesmyquealer

Vinyl Record Corner Protectors for Shipping

Use these to protect corners of vinyl record sleeves when shipping. Make a sandwich with cardboard as the bread and your record and sleeve as the meat. Slip one of these over each corner around the cardboard and the sleeve will be…

Pobrania
178
Polubienia
15
Ocena
0
P
Printablesmoebis

DJI Integra Lens Protectors

Protect your OLED screens from getting burned, since the Integra doesn't come with a protector. Original model came from LoneStarUAV, but he had a logo on it, which made it hard to print in the correct orientation (printed on the back so…

Pobrania
178
Polubienia
14
Ocena
4,33
P
Printablesen-x

2015 - 2017 Mustang Cup and Accessory Tray Protectors

I built these 2015-2017 Mustang Cup and Accessory Tray Protectors to be inserted in the existing rubber protectors. These can be easily removed, cleaned and reinstalled without having to remove the rubber parts. I printed these on the…

Pobrania
168
Polubienia
26
Ocena
5
P
PrintablesMR3D

Capuchones protectores para conectores BNC. Protective caps for BNC connector. Various types of protectors for BNC connectors

Los pocos protectores para conectores BNC que he podido descargar presentaban problemas con las medidas, generalmente eran muy grandes y había que reescalarlos. Asi es que me he puesto manos a la obra y he diseñado unos protectores…

Pobrania
159
Polubienia
23
Ocena
4,5

Face shield v2, uses clear plastic page protectors

This is a face mask I designed to use these clear plastic page protectors ( https://www.amazon.com/Protectors-Plastic-Sleeves-Binders-Protector/dp/B075ZSRSWS/ref=pd_ybh_a_1?_encoding=UTF8&psc=1&refRID=JQHSHNEZ0XVZRPNVB2K8 ) the benefits…

Pobrania
154
Polubienia
0
Ocena
0
P
Printablesxlukastsu

Guitar amp protectors/corners

I designed this corner protector for my ibanez tone blaster 15W. Print Settings Printer Brand: Bambu Lab Printer: A1 **Rafts:** No Supports: Yes **Resolution:** 0.2 Infill: 60% **Filament:** FilamentPM PETG Black Category: Music

Pobrania
154
Polubienia
14
Ocena
0
P
PrintablesTB

magnetic bench vice jaw protectors

The jaw protectors fits to a jaw width of 100mm (102). I printed the protectors in PLA and TPU as solid parts. A sample gCode is added but my recommendation is to create your own with reference to your filament wish. Any questions or…

Pobrania
153
Polubienia
32
Ocena
5
P
PrintablesTim O'Brien

AOS LR5 Parts: GPS mount, antenna mounts, landing feet skids, arm protectors, O3

A followup to my UL5 parts page, now for the new AOS LR5 O3 version! Also see my new O3 Camera Pod design ! Made to fix all the issues with mounting the DJI O3 Camera on your AOS frame (or many many others) It also offers dipole antenna…

Pobrania
146
Polubienia
16
Ocena
5
P
PrintablesBeetleBuild

Space Bear Fridge Protectors

This model has a 12x3 mm hole for a neodymium magnet. Curiously strong magnets for small but mighty beings : ) Recommended to print with supports due to the models details. I can try to add different sizes upon request (based on available…

Pobrania
143
Polubienia
61
Ocena
4,67
P
PrintablesZigzain

Decorative book corners protectors D&D

A simple protectors corners for Dungeons & Dragons Player's Handbook made in dwarf's style. Follow us in VK: https://vk.com/drunkenbadger Print Settings Printer Brand: TEVO Printer: Tarantula **Rafts:** No Supports: No **Resolution:** 200…

Pobrania
140
Polubienia
21
Ocena
0
P
Printablesltlowe

Orbit Irrigation Sprinkler Protectors

Irrigation Sprinkler Protectors for Orbit Saturn-III and Voyager-II gear drive sprinkler heads. My models are inspired by @jimerb_132206 Grass Protection Ring but designed from scratch to completely cover the head except for the riser.…

Pobrania
140
Polubienia
29
Ocena
0
P
PrintablesMagnetik

Motorcycle Fork Protectors

Protectors for motorcycle/bicycle front suspension forks. All dimensions are in FreeCad spreadsheet and are currently set up for Honda SLR 650. These protectors can be installed without disassembling suspension. Work in progress, I'll…

Pobrania
135
Polubienia
31
Ocena
0
P
PrintablesConnor Visser

Xbox Stick Drift Protectors

Mixed the idea of both models, @Fabri91's Xbox Stick Locks and @Lichtjaeger's Switch Stick Locks. The cutout in the stick lock like Lichtjaegar's allows you to use filaments other than TPU and also borrowed the notch to allow easy…

Pobrania
130
Polubienia
8
Ocena
0
P
PrintablesPrintin'Monkey

Exploding Kittens Replacement Box Insert - Sleeve Protectors

My kids kept destroying the cards when we play Exploding Kittens so I picked up sleeve protectors to help them last longer. On the plus side the cards are in great shape. On the other side, they no longer fit in the tray that comes with…

Pobrania
129
Polubienia
16
Ocena
5
P
Printablesjohnrotaru

Cat Pot Protectors

Prevents cats from messing about with the soil in plant pots. My naugthy cat was always spreading dirt around and using the pot as a loo! :) Not anymore!! Plants can still be watered if printed without the bottom/top layers. This model is…

Pobrania
120
Polubienia
36
Ocena
0
P

Socket Protectors

Socket protectors to prevent your bored children around the house from sticking things in wall sockets that shouldn't go into wall sockets. Unfried children are better :) Also helpful for kitchen settings, protecting the sockets from…

Pobrania
114
Polubienia
28
Ocena
5
P
PrintablesChrisE

Kitchen Work Top Edge Protector for Kids - Corner Protectors

3D Printed Corner Protector - Self Gripping - Scale to Fit Prints with Supports Print downward to ensure layer orientation for mechanical grip / layer adhesion (30mm Worktop)

Pobrania
112
Polubienia
18
Ocena
0
P
PrintablesTheCafeRacer

Garden Hose Thread Protectors

Protect your expensive hose threads from dirty, dings, and anything that can cause your hose to leak. 4 Versions: Vented: Thread protector with vent holes. Hole: Thread protector with one large hole. Closed: Thread protector with no vent…

Pobrania
111
Polubienia
20
Ocena
0
P
PrintablesMikel

Prusa Core One / + Improved Side Dust Protectors (Non-Visible Gap)

This model is directly based off of dancan13f's Dust Protectors, but greatly improved. The only issue I had with the original dust protectors is that the version that would fit within the Core One is split right in the middle. That split…

Pobrania
109
Polubienia
47
Ocena
5
P
Printableskwfredeen

Interlocking vase mode joycon protectors

Protects joycons, particularly the joysticks. This variant locks together to keep joycon pairs together in a bag. Video of the locking function: You can also slide them apart, but the layer lines make an unpleasant noise. I have added…

Pobrania
106
Polubienia
28
Ocena
4,5
P
PrintablesChad

TLR Chassis Protectors

These are SVG Files to cut your own chassis protectors for the TLR 22x4, 22 5.0, 22 SCT 3.0 and the Vision Racing 22T-XT Chassis. There is also a TLR key chain because I had to upload a model file of some kind to post these. I am still…

Pobrania
97
Polubienia
5
Ocena
0
P
PrintablesHydrohs

Expansion Card Protectors (ISA/PCI/AGP/PCIe)

Very simple and quick prints to protect the connectors on various expansion cards. You may need to adjust scale very slightly if they print too loose or too tight. I don't have any spare PCIe x8 cards to measure with, but scaling another…

Pobrania
97
Polubienia
8
Ocena
0
P
PrintablesDiegomerck

8Bitdo + Xbox Joystick Caps (Protectors)

Prevent damage on your controller's joysticks with these Caps. Compatible with 8bitdo & Xbox controllers. (I don't have a PS controller so I don't know if either of the sizes fit those controllers, comment below if you try them out to see…

Pobrania
97
Polubienia
19
Ocena
0

sturdier Kayoumini Parts (skids)(Caddx Ant canopy)(motor protectors)(vtx anenna holder)

A little Stylish rework of the canopy for the caddx ant (i actually redesigned it from the ground up, but i made it to be the same shape) with some slots to be colored with nail polish. that is a bonus if you care for color matching your…

Pobrania
95
Polubienia
8
Ocena
0
P
PrintablesPeter Petermann

Speedybee Master 5 HD - Arm wire protectors

Simple wire protector for the Speedybee Master 5 HD frame, to stow away those cables nicely. TPU 98A or harder work to cover all 4 arms you'll have to print version A and B twice each. Category: R/C Vehicles

Pobrania
94
Polubienia
6
Ocena
0
P
PrintablesKen Cole

Side Table Storage Protectors

These storage protectors slot directly into the side tables in a Brinkley 3310 (and perhaps others). They keep items stored in the side tables from sliding out during travel. The table next to the slide is especially important since items…

Pobrania
94
Polubienia
7
Ocena
5
P
PrintablesHentai Kamen

Gimbal Protectors for Spektrum iX14+ and Compatible Models

Gimbal protectors for the Spektrum iX14+. May also fit other iX models (not tested). Application: Place the gimbal protectors onto the gimbals from above. Print Settings: Printer: Creality K1 Nozzle: 0.4 mm Material: Creality Hyper PLA…

Pobrania
91
Polubienia
4
Ocena
0
P
PrintablesGracro

Costco (Whalen) Shelf Boots (floor protectors)

My mum bought some heavy duty (~40kg) shelving units form Costco for her pantry. These are Whalen branded- see the photos for the box design. The pantry floor is linoleum so if the vertical columns of were placed directly on the floor the…

Pobrania
90
Polubienia
25
Ocena
0
P
PrintablesSkav

Honda CRX ED9/EE8 side protectors mounts

Mount for side protectors for honda crx ed9/ee8 Reverse engineered from (probably) orginal mounts in side mounts for front fender. It work quite well in my case Dont look at print quality of my version - i had quite wet filament at that…

Pobrania
88
Polubienia
9
Ocena
0
P
PrintablesEddi Maevski

Frsky Taranis X9D M9 Gimbal protectors

Frsky Taranis X9D M9 gimbal protectors There are few options here on Thingiverse...I've wanted better fit and wider opening to fit many custom stick ends (stick opening dia. 12.5 mm) Printed in PLA, infill 100%. M9 gimbals , highly…

Pobrania
85
Polubienia
9
Ocena
5
P
PrintablesTim O'Brien

Diatone Ripper R690 Servo Cover & Protectors (aka HEE Wing F-01)

Part 2 in my make-the-Ripper-epic series: Fitted servo covers! The Ripper, also known/sold sold as the HEE Wing F-01. Want to give your servos better protection in your bag, potentially lower drag, and better crash-resilience? Print…

Pobrania
84
Polubienia
11
Ocena
0
P
PrintablesCHARLY UY

FIAT WAY - Highway headlight protectors

Printable protector for fiat uno evo way headlights. It is placed under pressure without the need for adhesives to stick.

Pobrania
84
Polubienia
15
Ocena
0
P
PrintablesBahnamoon

12V battery terminal protectors

For a car battery to prevent arc's work in progress.

Pobrania
79
Polubienia
11
Ocena
5
P
PrintablesVal Bluestein

Subaru Paw Safe Paw protectors for cargo area. (recreated)

cudaman uploaded this but did not have the original file, only a gcode file. I ran the gcode through a gcode to stl converter and then imported that into Fusion and recreated and tweaked it. I have included both the stl and the f3d file…

Pobrania
77
Polubienia
14
Ocena
5
P
PrintablesThibLM

FPV Motor Wire Protectors with Various Lengths Remix

FPV Motor Wire Protectors with Various Lengths Remix without zipties. I prefer using 3M textile tape. Post your makes!

Pobrania
74
Polubienia
5
Ocena
5

TBS Source One V5 Side Armor VTX Armor Protectors Covers

Simply slide these onto your standoffs and you're good to go. There's a few different versions in here to work with some parts I had (Speedybee F405 V3 FC and ELRS RP3 Nano Reveiver Antennas) so your mileage may vary. Boolean out your own…

Pobrania
72
Polubienia
6
Ocena
0
P
Printablesthall72
Pobrania
67
Polubienia
17
Ocena
0
P
Printablesventrue3000

Gridfinity tray with handles and Modern Case spill protectors

This tray allows the use of two layers of bins in Matthew's Modern Gridfinity Case . The tray itself adds 1u, the handles add another 2u. This means that in the 6u case, you can use one layer of 2u bins and a second layer of 3u bins.…

Pobrania
66
Polubienia
12
Ocena
0
P
Printablesmroek

Worx Landroid M corner protectors

Corner protectors for Worx Landroid M robotic mowers. Just print and stick some double sided tape on the inside, and then carefully slide them onto the chassis, making sure the tape doesn't stick until fully seated. Using glue is of…

Pobrania
64
Polubienia
7
Ocena
0
P
Printablesrepcsike

LG Washing Machine button child protectors (locks)

I have an LG washing machine and it has a child lock feature, however this will still allow my son to push the pause/start and power buttons. When the machine is already running and has water in it after a power cycle it will measure the…

Pobrania
63
Polubienia
10
Ocena
0
P
Printables3DJourney

Modular holder / storage / organizer for rifle & pistol barrel thread caps / protectors, compensators, suppressors

Modular holder / storage /organizer for rifle and pistol barrel thread caps / protectors, compensators, suppressors etc. This is a modular design so you can pick from the available supported threads and then screw those into the thread…

Pobrania
62
Polubienia
13
Ocena
0
P
Printablesd0pefish

MiSTer USB Bridge and Bracket Protectors

Slides over the MiSTer USB bridge or USB bracket to protect the exposed pins from shorts/damage. Designed to fit snug with tight tolerances, YMMV with your 3D printer. For the USB bracket , use "Detect thin walls" and 1 perimeter in…

Pobrania
60
Polubienia
5
Ocena
0
P
Printableseried

Flipper Zero Mayhem back and camera protectors

The camera protector fits any ESP32CAM and the back protector fits mayhem pcb v1.2 to v2.0 and newer: https://github.com/eried/flipperzero-mayhem/wiki/Versions Print and test fit, you might resize to +/- 0.2% depending on the filament and…

Pobrania
58
Polubienia
16
Ocena
5
P
PrintablesErnestasVai

Husqvarna Svartpilen 401 radiator covers/protectors

Husqvarna Svartpilen 401 radiator covers/protectors. Clips on to radiator, also has holes to additionally put zip ties. [2025-05] Added trim covers for accent color that could be glued on.

Pobrania
55
Polubienia
12
Ocena
0
P
PrintablesTim O'Brien

AOS UL5 Parts: GPS mount, antenna mounts, landing feet skids, arm protectors, O3

Do also check out my new AOS LR5 O3 parts page too! Don't land on your motor bolts! Don't go erasing your motor bolts ! Print these minimal landing feet / arm protection. Go long range: go GPS! Sandwiched-in super easily between the…

Pobrania
54
Polubienia
8
Ocena
0
P
PrintablesPaskuRT

Geprc Cinelog 25 propeller protectors V2

New propeller protectors that eliminate the need to dismantle the motors to replace them, lighter than the previous ones and easy to install and print, I recommend replacing the lower screws with ones with a slightly longer distance, and…

Pobrania
53
Polubienia
2
Ocena
0
P
Printables3DJourney

Replacement TPU Chair feet / floor protectors / Stool feet cover

Floor protectors that fit the end of a chair or stool leg to protect wooden or delicate floors. Outer diameter is 25mm fits 22mm round foot. Has a lip for the style of foot for my chair leg but you can cut that away post or pre print if…

Pobrania
53
Polubienia
9
Ocena
0
P
PrintablesmouseFPV

Snap on Radiomaster Five33 MCK RipStick Protectors

RadioMaster TX16S Gimbal Protectors | Five33 Ripsticks (MCK) This gimbal protector snaps to the stick and wont fall off! This is a remix to fit the MCK ripsticks. I shortened the height on the _short file, to be the height of the sticks…

Pobrania
53
Polubienia
3
Ocena
5

Wall Outlet cord protectors baby-safe 3 versions

Our baby learned how fun it was to pull power cords out of the wall. I couldn't find exactly what I wanted online so I modeled these up. There's a few versions: Single outlet - holds one power cord in place and covers up the other outlet…

Pobrania
52
Polubienia
15
Ocena
5
P
PrintablesJack Lenders

QAV-S Stack Protectors

Left and right stack protectors for Lumenier QAV-S. Print in ABS or PETG. Also look at my other QAV-S models. QAV-S Skids https://www.thingiverse.com/thing:6121858 QAV-S Caddx Vista Antenna Holder https://www.thingiverse.com/thing:6121848…

Pobrania
52
Polubienia
4
Ocena
0
P
PrintablesRapidflipper

Whirlwind Pinball Ramp and Scoop Protectors for Cellar shots (Williams 1990)

These protectors are designed for the two cellar shots on Whirlwind pinball. On my game these were pretty worn, so these will both protect the game from further wear as well as make the shots closer to the original tolerance. They fit…

Pobrania
51
Polubienia
5
Ocena
0
P
PrintablesDan Rogers

Pretty baby gate / dog gate wall protectors - big dog approved

We decided we needed a more secure way to manage our toddler - who is a three year old Labrador retriever. Another gate (the kind with the metal bar across the bottom and a door within the gate) to the rescue - now how to protect the…

Pobrania
51
Polubienia
10
Ocena
5
P
Printablesish

TBS Source One V5 Side Guards/Protectors

This is a custom side guard designed specifically for the TBS Source One V5 FPV drone frame. On this frame, the ESC and flight controller stack are quite exposed, which often leads to dirt, grass, and debris buildup—making cleaning…

Pobrania
50
Polubienia
4
Ocena
0
P
Printableswerz 99

Chisel Blade Protectors

Protect against injury and damage - 14-19mm

Pobrania
50
Polubienia
10
Ocena
4
P
Printablescudaman

Subaru Paw Safe Paw protectors for cargo area.

These lock into the pockets in the cargo area of a Subaru to keep pet paws from getting hurt by paws getting stuck in those holes in the back or a toenail from getting snagged. They also help keep the area smooth from items getting into…

Pobrania
50
Polubienia
7
Ocena
0
P
PrintablesLS

Starlink Gen3 Corner Bumpers / Dish Protectors (TPU - No Support Needed)

Print this model in TPU (designed for flexible material) -- I printed with the below settings with great results: No supports enabled 3 top layers, 2 bottom layers, 2 wall loops 10% infill, cross hatch Print SLOW: 20-35mm absolute max The…

Pobrania
49
Polubienia
4
Ocena
0
P
PrintablesSiggy101

Hauck babygate wall protectors

A simple wall bracket to use with Hauck Stop n Safe 2 babygate (but will probably be easy to scale up/down for other babygates). The cup needs to be secured to the wall with doublesided tape. The babygate has round pushers that fit inside…

Pobrania
48
Polubienia
7
Ocena
0
P
Printablesbilliaden

Apex 5" Motor Wire Covers - ImpulceRC FPV Drone Arm Protectors

These are simple wire covers for the ImpulseRC Apex 5", should fit regular, HD and EVO models, and many of their clones. They are made to be the exatct same size as the arms, following the original curves, so they fit nicely, while…

Pobrania
47
Polubienia
3
Ocena
0
P
PrintablesCircuitGremlin

Futaba T8FG gimbal protectors

Remix of https://www.thingiverse.com/thing:2520520 Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Resolution: 0.2 Infill: 25% Filament: 3DWare PLA Notes: Anycubic i3 MEGA Category: Hobby

Pobrania
47
Polubienia
6
Ocena
0
P
PrintablesClough42

Servo Protectors for ParkZone Radian Pro

This is a set of covers for the flap and aileron servo linkages on the ParkZone Radian Pro. These covers will protect the servo linkages in a "landing" and prevent stripped gears. The aileron covers also have a rib that will skid along…

Pobrania
46
Polubienia
3
Ocena
5
P
Printables2BitNerd

One Night Ultimate Werewolf Parametric Card Edge Protectors

We play One Night Ultimate so often, our cards were beginning to show wear on the edges. Players could start to tell which card was which. These snap-on card edge protectors will ensure your edges are clean, protected and consistent. It…

Pobrania
46
Polubienia
8
Ocena
0
P
Printablesforsaken_candy

2- and 3-prong US plug covers/protectors

Protectors/covers for type A (2-prong) and type B (3-prong) plugs. Tested with PLA and 0.8mm nozzle. But should work with smaller nozzles and PETG too. Use random seam alignment. Don't use silk or matte PLA because it has poor layer…

Pobrania
45
Polubienia
4
Ocena
0
P
Printablesgadget76

Motorbike Front Fork Protectors (Fork Tube Guards)

These protectors are designed to shield motorcycle front suspension tubes (fork legs) from insects, mud, stones, and other road debris. Their main purpose is to reduce wear on fork seals and extend the life of the suspension system. They…

Pobrania
45
Polubienia
6
Ocena
0
P
PrintablesPowersaj

Steam Controller (2026) Stick Protectors

Read the advisories please. Travel protectors to prevent the Steam Controller's joysticks from making major movements. Allows for healthy wiggling. !!! Flat side up when mounting, the bottom side has curves to not harm the sticks, and to…

Pobrania
44
Polubienia
9
Ocena
0
P
PrintablesRobin

Frame/Engine Guard Protectors

Sold on the internet for 30€ or so, which i think is a ripoff. So i designed it myself so you can print it if you want such a thing. Feel free to modify it for your need Designed for 25mm round stock, bolt on with 4 M4x20mm hex bolts and…

Pobrania
44
Polubienia
7
Ocena
5
P
PrintablesHarry

Heuer Front 120 Vice Jaw Protectors

Simple to print, PETG is a good choice here.

Pobrania
43
Polubienia
3
Ocena
0
P
Printablestimn

Primus Lite Plus Stove Protectors

The Lite Plus stove can be packed neatly into the pot. But there are few problematic spots with which this protector set helps. The pot peg protector prevents scratching of the lid. The burner protector prevents the lighter pin to be…

Pobrania
42
Polubienia
2
Ocena
0
P
PrintablesTurnipToss

2x3 Rack J Cup Protectors (PRX and Titan T3)

Untested on Titan t3, however I think it will probably work. If you do not want to print check out Aperture Engineering's Design, he sells fully printed models and supports many other configurations and accessories. I have attached solid…

Pobrania
42
Polubienia
18
Ocena
0
P
PrintablesMerlwynd

Starlink Antenna Base Protectors

The Starlink Antenna base (Standard Antenna) is made of metal, and could possibly scratch painted surfaces or fiberglass. These protective feet fit over the 4 ends of the base and protect the surface the base sits on. I used TPU to print…

Pobrania
41
Polubienia
5
Ocena
0
P
PrintablesMob_le_printeur

Protège-Coins pour Meubles – Furniture Corner Protectors

Protège-Coins pour Meubles – Élégance et Protection Polyvalente 🏠✨ 🔸 Arrondissez Vos Angles avec Style et Sécurité! Apportez une touche d’élégance à vos meubles tout en adoucissant leurs angles grâce à ces protège-coins imprimés en 3D.…

Pobrania
39
Polubienia
2
Ocena
0
P
Printablesandreirusu99

Traxxas Slash/Raptor Body Center Brace and Body Protectors

These parts are meant to solve an annoying issue with the Traxxas Slash that I have, mainly that the body is not supported in the middle, under the roof, and therefore impacts with the car cause the body to crack severely. Therefore, I…

Pobrania
39
Polubienia
15
Ocena
0