Black-PSU holder
You can mount the PSU at the side, so you be able to stack multiple enclosure on top of each other.
Wydruk około 3,44 €–4,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 1297
- Polubienia
- 80
- Ocena
- 4,91
3245 modeli
You can mount the PSU at the side, so you be able to stack multiple enclosure on top of each other.
Wydruk około 3,44 €–4,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Just an other Prusa MK3 PSU-Bracket / Brace. My Frame has a Skew-Value of 0.01 ! (Support Menue) Please have a look on my other Prusa MK3 Prints https://www.prusaprinters.org/social/1247/prints It fit's between Mainframe and Rearplate,…
Wydruk około 10,38 €–12,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Nespresso Capsule Holder - remodeled
Wydruk około 7,67 €–9,38 € nettoWstępna wycena jednego wariantu
ENG Attention: Not a genuine Philips component! You want the light strip to shine on the ceiling? No problem with this wall bracket. Simply screw it to the wall and clamp the Hue Light Strip in place. With several clamps, arches can also…
Wydruk około 1,17 €–1,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Nespresso coffee capsule holder for Prusa MINI. I had to make this model because the original did not fit the mini. Just use some double-sided tape to attach it to the wall. Print instructions Print in PLA or PETG I used 15% infill for…
Wydruk około 3,58 €–4,37 € nettoWstępna wycena jednego wariantu
A simple surface mount ATX PSU support frame. Works well with an EVGA 1000W PSU. Printed in PLA, more infill is better! 6x bolts (I think I used M6) required + ATX PSU mounting screws. Absolutely no warranty implied or given if you use…
Wydruk około 23,62 €–28,86 € nettoWstępna wycena jednego wariantu
Case for Atari 1050 / XF551 floppy power supply unit. Krabička pro napájecí zdroj disketové jednotky Atari 1050 / XF551. Print instructions english text bellow ==== CZ ============ Napájecí zdroj pro floppy Atari 1050 / XF551 Jde o návrh…
Wydruk około 8,04 €–9,82 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A mount to allow an ATX PSU to be used in the NR200P case. This holds the power supply at the front of the case in front of the graphics card with space to allow the front panel IO cables through. It's based on the one you can download…
One piece version of the excellent Nespresso Vertuo Capsule Pod Dispenser by sdgsean. Modeled to support 3 slide out drawers of the original design (included here but is the same as the original model). Printed front facing side down with…
Wydruk około 39,36 €–48,11 € nettoWstępna wycena jednego wariantu
Nespresso Vertuo Capsule Dispenser. This design holds two of the 61mm x 68mm boxes.
Wydruk około 6,77 €–8,27 € nettoWstępna wycena jednego wariantu
After placing my Prusa i3 Mk3S Bear Upgrade in an enclosure I realised it would be better to remove the power supply unit (PSU) and place it outside the enclosure to improve cooling. I searched for a replacement brace but the Bear Upgrade…
Wydruk około 5,36 €–6,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
(English below) Für ein LED Projekt habe ich bei Amazon ein 100W 24V LED Netzteil gekauft, welches aber viel Spielraum für “Unfälle” bietet. Link: Amazon DE Um das Risiko zu minimieren und um das Netzteil einfach hinter dem Schrank liegen…
Wydruk około 3,25 €–3,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is my design of a refillable capsule that works with the SmartClean system from Philips to automatically clean the shaver heads. As the JC301, JC302 capsules and the SmartClean system was replaced by a newer one, the original…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Just my design of a PSU Holer for the Prusa Mini. Mounted the PSU on my IKEA Lack Enclosure. Could be used as Holder for many more things. Print instructions I used black Geeetech PLA with the 0.25 DRAFT settings from PrusaSlicer on my…
Wydruk około 0,81 €–0,99 € nettoWstępna wycena jednego wariantu
Needed a model for a project which is more solid than the real coffee capsule. So this is what I've created :-)
Wydruk około 1,13 €–1,38 € nettoWstępna wycena jednego wariantu
A Dual Egg Capsule (2 eggs) for Egg Loft Altitude events, specifically designed to be printed with LW-PLA. Modeled and created to fill a need for rocketry hobbyists as no commercial Dual Egg capsule kits are available. Foaming LW-PLA can…
standing Nespresso caffee capsule holder 2 line with cut out for easier use.
Wydruk około 8,70 €–10,63 € nettoWstępna wycena jednego wariantu
I've been using the Seeed Studio ATX PSU breakout board for a while now and nearly had an incident by leaving the board floating around the desk with lots of metal bits around. I decided to make a simple cover for the bottom to prevent…
Wydruk około 1,84 €–2,25 € nettoWstępna wycena jednego wariantu
Um einen PSU-lock zu bewegen habe ich mit OpenSCAD ein Tool gebastelt, dass den PSU-lock aufnehmen kann und einen Knopf dazugestellt, damit die Finger nicht abrutschen. <…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple PSU cover. Prints without support. For use with 3mm countersunk screws.
PSU switch box - hole 22x19mm with cap v01
Wydruk około 1,52 €–1,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Montura para capsula TSB-165A de 16mm del micrófono BM-800. Permite el cambio de plano del micrófono de vertical a horizontal, mediante el reemplazo de la montura original. Impreso con Biqu B1, boquilla de 0.4, PLA, capa de 0.2mm, 30% de…
All printable parts for your Basic Board + PSU Add-on. Basic Board + PSU Add-on is needed only if you have Advanced Filtration System or/and White LED Strip Add-ons You have the option to print two different holders for two different…
This part was designed this for a Prusa i3 MK3S with an accompanying IKEA Lack enclosure . In the instructions for building the enclosure, it's recommended that you replace the power supply unit (PSU) with a brace like this, and relocate…
Inspired by commercial products and self-made solutions, I decided to design and print my custom version of a Nespresso capsules dispenser. It wanted it to be nice to look at, functional and simple at the same time. What you see here is…
--- latest Update: Salt & Pepper Insert! --- Since the camping season is starting again I designed Inserts to use the Container for Salt & Pepper or sth. like that. Also I did minor improvements to all parts. --– Printed O-Rings (TPU) ---…
This small capsule can be used as an EDC accessory case, providing a convenient way to store and carry matches, pills, batteries, or other small items. Included in the design is a looped top, allowing you to conveniently attach to a…
Keep your small essentials organized, safe, and stylish. This 3D printed EDC (Everyday Carry) container is designed with a focus on tactile feel and rugged utility. The detailed knurled texture not only provides an excellent grip—even…
introducing “TANK” the small but heavily rugged capsule/container for any kind of outdoor usage. waterproof against rain when using O-ring with dimension 3.5mm x 31.7mm (ID). I have included some STL- file of such ring for reference but…
A Keychain of the Capsule Corp. Logo from Dragon Ball/Dragon Ball Z/Dragon Ball Super Saga's. This model is specifically made for Glow in the Dark elements but can take any color or themo-platics you want. Just keep in mind that different…
Updates 03/2022: Changed two screw holes on the switch side part to slotted holes (v2.1). This allows you to tune the fit and tension during assembly. 04/2021: Added a "MIRRORED" version, which allows you to flip the PSU around and have…
This is improved and re-modelled model inspired by https://www.thingiverse.com/thing:4251317 = basically cutted out useless centre and fixed the height of the inner fins (rungs). Rovanni (author) was even inspired by me and modified his…
If you remove the PSU from your MK3 (for example to place it outside of an enclosure), you can use this brace to maintain the frame stiffness. This was tested with the older silver PSU mount Print instructions Prints without supports
Small Nespresso capsule holder. Two variants - for 24 pcs (only Part 1) or for 48 pcs (Part 1 and 2). You can remove the cover and fill the capsules into the holder body. Print instructions Printed with Prusament PLA, without supports.
A PSU Fan cover/silencer for the Creality Ender 3 Pro / Meanwell LRS-350-24 PSU This model was designed to print the models separately in different colors and fit the embossed letters into the debossed fan cover. If the embossed “GHOST”…
A beautiful flower pot permeated with a organic double wall voronoi outside shell. This wonderful art decor is also ideal as a gift and as decoration everywhere an eye-catcher! I have printed it with 5 layers and the pot was waterproof. I…
3D Printable Mini ITX computer case. Full build video: https://youtu.be/WKnhARips-w Features: 2-slot Graphics Cards up to 270mm (about 40mm thick) Bottom to top ventilation Mounts for ATX power supply (depth max 125mm) Mounts for 3.5" HDD…
I modified an existing project. I added a fan mount on the front of the BC-250 board and also modified the case front to make everything fit. The idea was to not destroy the fins of the original BC-250 cooling. Additionally, I recommend…
This is a capsule holder I designed to be glued to a the side of a Nespresso coffe maker. It holds 3x5 capsules. Print Settings Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Notes: No supports required, print on flat side.…
My wife needed a Nespresso Capsule holder that was small and did not take up much space, so I designed this one for her. She was very very happy with it! This Capsule holder takes 15 standard Nespresso capsules or Nespresso compatible…
My version of a nespresso capsule dispenser. If you need it , print it ! :-) Happy printing. Printing advise: None realy. I used PLA, 15% infill and no supports. For the loop use a brim.
Sizes that have been tested and confirmed to fit. Size 000 Size 00 Size 0 Size 1 Size 2 Size 3 Size 4 Sizes I have not yet tested I pulled the size specs off the web but you will have to test the actual fit and function yourself. Please…
I designed this PSU cover for the Mean Well LRS200-24 PSU. The model files contain one “normal” cover and one with the VORON Design logo (i originally designed this cover for my VORON v2.4). EDIT: Dualcolor version available
I couldn't find a cable comb that suited my taste, so I designed it. Print settings: Filament: PETG (I recommend against using PLA due to its potential for deformation caused by heat.) Layer height: 0.2mm Supports: no Perimeters: 3 Notes:…
I make it for my Fractal Design Define Nano S PC case Print from PETG/ABS/ASA/HT-PLA Walls: 4-5 Infill min 30% UPDATE!! NOW NEW Honeycube Mesh Variant!!
This sleek EDC (Everyday Carry) capsule gives you stunning two-tone aesthetics using a brilliantly simple snap-fit design. Whether you're organizing your desk, building a survival kit, or just need a stylish keychain stash, these…
If you've ever thought of upgrading your printer to dual Z drive, you've probably run into the problem that the power supply is in a very bad place. This simple little model will help you move the power supply under the heated bed. It…
This modernly designed Nespresso capsule holder is simply too good to not want to have at home. It holds a maximum of 21 capsules, stands securely without taking up too much space, and is quick and easy to print (no supports required).…
A simple, toolless case for the BC250. Who knows how bad the thermals are! Printed in PLA, it's probably fine. The build assumes the center fins of the card have been opened up to accept a fan. BOM BC250 APU Board Flex PSU with…
it contains 2 mount versions, one with 50mm hole spacing and one with 55mm hole spacing.
Nespresso changed their packaging on the virtuoline capsules without warning and made the old capsule holders worthless (the ones that hold the cardboard inserts) so I offer this version that works like the Classicline holders that you…
If you've ever been in the same room as a Sovol SV06, you'll know that the stock PSU's fan is one of the noisiest parts on the machine. With this simple addition, you can make your printer much more pleasant to be around. It significantly…
PC test bench / open frame PC case Changelog 2023-06-28: Fixed the position of the PCIe slot screws. New file name: “ITX base -_bottom v2.stl” 2023-12-04: Fixed height of PCIe bracket (thanks @sonicscrewfu for the feedback) 2025-01-06:…
IMPORTANT : this model is about 20mm longer than the ender 3v2 print bed. So you will need to print this on a different machine or alter the model before printing. If you don't want to do that you can take a look at my original version…
This is an improved version of Dolce Gusto capsule holder: https://www.thingiverse.com/thing:2847560 You will need: 1x base (0.20 layer height or above) 1x ring 6x capsule holder Depending on the total height you want: 220 mm height…
Exhaust Fan Silencer that was inspired by the Flowmaster muffler design. I know that it looks kind of hokey, but it's hard to argue with the results. The folks at Flowmaster really know what they are doing with muffler design. This Fan…
Upgrade your power supply fan to 92mm and make it SILENT! -Use a 24V fan or use buck converter to step down to 12V: https://a.co/d/c0GqEZc 92MM fan: https://a.co/d/44JLwyI Black is ground, Yellow is positive. You don't need the other two…
I wanted to design a stylish capsule holder for my Nespresso machine and came up with this idea. Started to sketch in Fusion 360. Later, i searched thingiverse, if something similar exists already and found this:…
Hatshepsut Sphinx at The Metropolitan Museum of Art
ball soccer shaped capsule for multicolor printing recommended parameters: -wall 3 - 4 -supports 60° -infill 20%
This airtight capsule offers a reliable solution for safely storing essentials like pills, matches, and small tools, keeping your belongings secure in any environment. Compact, durable, and versatile, it’s the ideal companion for camping,…
This muffles the noise from the PSU fan. Remove one screw at a time (If both PSU screws are removed at the same time, the internal fan will fall into the PSU). Print instructions Supports are not needed if you have good part cooling…
A modular, 2-part, 19-inch rack mount for the Ubiquiti Unifi UCG-Fiber Power Supply Unit (PSU). This model comes in 4 variations: A plain mount, just for the PSU. A version with keystone slots. A version with a shelf. A version with the…
Nespresso Vertuo Capsule Drawers! Inspired heavily by the two models mentioned below, I married their concepts into one amazing Nespresso Capsule dispenser. The pictured product features 4 drawers, but you can print as many or as few as…
The case is 5.4 liters. It's shaped like a cube because it can easily be printed on basically any printer COMPATIBILITY: Mini ITX motherboard Single slot low profile PCIE card 70 mm CPU cooler clearance (Arctic passive & AMD Wraith Spire…
For all the nespresso coffee capsules users Print Settings Supports: Yes Resolution: 0.2mm Infill: 15% Filament: Fillamentum Pla Extrafill Category: Kitchen & Dining
Fan Duct for the PSU and the Mainboard of a Snapmaker U1 to improve the cooling and isolate the cold air flow from the chamber. I also publish my CAD (FreeCAD) and STEP files for further remixing Printed with ABS for heat resistance.…
MK3S black PSU holders (top/bottom part) for IKEA lack. To fix the PSU in there are no screws needed, just slide the PSU between the parts.
A set of brackets to move PSU from the side to the rear of Ender 3. Does not fit Pro or V2 . UPDATES: Alternative version 2.0 to be mounted with M5 bolts screwed into tapped holes in openings of profiles. Check if you have those holes…
Humans began flying in space over 60 years ago. In April of 1961 Yuri Gagarin of The Soviet Union Air Force was the first followed by Alan Shepard of The United States Navy in May. Shepard flew in a Mercury capsule on top of a Redstone…
E nder 3 and E nder 3 Pro Fan Silencer Shrouds for PSU These are fan silencer shrouds for the Ender 3 and Ender 3 Pro power supply fans . In the pictures, the Ender 3 shrouds are yellow and the Ender 3 Pro shrouds are purple . They attach…
Very simple and functional dispenser allowing you to store 3 different types of coffee or cappuccino or not. The idea came up after seeing the absurd prices they ask for an item like this and also because of my stubbornness, I wanted to…
BC-250 Case that uses a standard ATX PSU. Requires 8 coarse thread PC screws, 4 for the PSU, and 4 to hold the case together. Leave the IO shield bracket on but remove the tiny metal bracket on the front for this case. The power button is…
New original designed Rugged Capsule Filament used: Prusament PLA - Army Green & ESUN PLA Black In-fill: 15 % Support suggestions Support on build plate for the Capsule Support inside the thread and overhang of the hanger for the lid
The Prusa MK3S is now shipping with an all new black power supply. This power supply has slightly different dimensions than the previous one. In order to relocate the power supply out of the LACK enclosure to the lower table we can no…
Držák na kapsle Dolce Gusto
Great for festivals and concerts to carry earbuds, keep your tokens safe or simply use as a portable ashtray. Excellent conversation starter. Height: 10cm / Diameter: 3cm If you’d like to support my work, leaving a ♡ like ♥ or even buying…
Compact Capsule Filler with Credit Card Mixture Dispenser This compact capsule filler is designed to fill 24 capsules of size 00 in one batch using a credit card as a mixture dispenser. The capsule filler is made up of three functional…
Each model was printed on my P1S with 5% infill, 2 walls, and .2mm layer height. I have printed each model multiple times using different types of filaments with varying results. Printing with matte filaments had the best results, making…
Kitchen set part 3 : Coffee capsule Dispenser (Pisa Tower) Make your your coffee tastes more Italia Compatible with all diam. 37mm capsules (Nespresso, Doce Gusto,...) 3 dispensers holes Fill the capsule tower from above Print as many…
The model that brotherchris made with the XH-M229 switchboard was fine, but it didn't include an adjustable unit, so I modified the model a bit and integrated the SK35 (XYS3580 can also use) buck/boost converter case prepared by fjkraan…
Flex ATX to ATX PSU adaptor Plate. The Horizontal orientated adaptor is also compatible with 1u PSUs. Allows you to fit a Flex ATX power supply onto standard ATX PSU mounting points. Please select the required Orientation. Each Adaptor…
UPDATE!!!! Oct. 2020 I change the case a little bit and the upper and lower mount. If you print the old case and your mounts doesnt fit, you only print the mounts new. then it works. Sorry You need 2 x upper mount and 1 x lower mount.…
Update! Due to popular demand i have released the step files for easier modification. Parts: Psu module: https://s.click.aliexpress.com/e/_oDMk7jQ USB-C pd board: https://s.click.aliexpress.com/e/_oDtVUnE Banana plugs:…
NEW VERSION HERE 2U plate to mount a full ATX power supply in a 10 inch rack cabinet. Do not print in PLA. The heat and the weight WILL eventually deform it. Requires a 10"+ build plate (254mm). A Prusa i3 or an Ender 3 is not big enough.…
One of my kids recently lost his tooth, but we were out of plastic bags so I made a tooth shaped container for him to put it in. He was very stressed about how the tooth fairy was going to pick up his tooth, and this ended up being the…
Goes into Tomy Gacha gashapon vending machine
Originally on Thingiverse : https://www.thingiverse.com/thing:5036589 This replaces the original black cover on the PSU's for Creality Ender 3 (non-slim version). The PSU will stay mounted where it is originally, but the power cable now…
I changed it a little. Added the hexagons for looks and a small chamfer around the model. Printed the brace with 30% infill. G-code is with standard Prusament 0.20 profile for PETG.
Modular The cupholder is modular and you can stack the module vertically as high as you want. To have a nice finish there is a top that you can optionally add. Installation The system is not fixated by itself, and is meant to be fixed to…
Here in France, a refill cartridge contains 8 capsules. The new design is now provided in 3 variants and sizes. Sizes / Capacity : • M : 9 capsules • L : 13 capsules • XL : 17 capsules Objects are optimized for a line width of 0.5 mm.…
Shut your loud machine up for good. Make your fans Wisper Quiet @ 19.9db Works for all Kobra 2 models This is taller than stock PSU cover you will need taller feet Here a link to some feet that work well Bambu Lab Anti-Vibration Feet List…
Updated version can be found here: https://www.printables.com/model/201359-ender-3-v2-external-electronics-box-meanwell-psu-a Created electronics box for the MeanWell PSU and Ender 3 V2 motherboard so I could keep it outside of my…
Using test 1 and 2, check if your capsules fit properly. If needed, you can adjust the size using your slicer. 🌟💊 (edit The majority of users scale their prints to 103%.) With this handy 3D-printed device , you can effortlessly fill 50…
These are Storz and Bickel Dosing Capsule Magazine funnels and stuffers. With this tool you can fill up to 9 capsules of the magazine at ones. Update (New and updated parts are added): -Version 2 of the multi funnels for 8 and 9 capsules…
Tool holder to hang on the MK3S frame over the PSU. It has compartments for pliers, glue, lubricant and big one for general purpose. At the back of the holder there are 6 holes for Allen keys and small tray for nozzles. Print instructions…
This model snaps into the hole behind the power supply in the NR200 case through which the power supply intakes air. Normally there is a gap between the PSU and the ventilated side panel of the case, which allows the PSU to intake warm…
Summary Rebuild or create your own configuration of the Nakagin Capsule Tower today and celebrate its 50th birthday! This design is a 1:200 scale model representation of the famous Nakagin Capsule Tower (中銀カプセルタワー) found in Tokyo,…
I'm quite happy with my previous mATX Open Frame Case , with the exception that cutting, drilling and tapping the 2020 extrusion is a chore. This design is fully 3D printed and fits on a single 200x200 or 250x250 build plate. It should be…