Liczymy pasujące modele…
Starting from the excellent existing model of drilling bounding ring I designed my own using parametric features from Fusion 360 and added nice features like printed diameter size I tested it from 4mm to 12mm drill bits (The range I…
Wanted a fully customizable version of the really nice thing:4861011 from thingiverse by mishkin2. This version was redesigned from the ground up using CadQuery (2.1) in CQ-editor (0.2). The source code is included as…
Depth stops for a 5" (130mm) 3 jaw metal lathe chuck, specifically a Bison chuck. They might fit others. These stops help keep the work parallel at a specific distance from the face of the lathe chuck. I have included STL's for stops in…
Following a suggestion from a maker that needed drilling depth stops for Imperial drilling bits, I reused the the Drilling depth stop (Metric) model I created and adapted my design to the main sizes used: 1/8", 3/16", 1/4", 5/16", 3/8",…
Allows for depth stops shallower than the 12mm minimum depth provided by the standard depth stops on the DF500. Includes: 10mm, 8mm, 6mm and 2mm I printed this in PETG. The stops can be easily snapped on or off the pull rod by hand.…
small diameter depth stops, cone nose to aid in chip clearance and visibility, uses 3mm x 12mm Cap head bolt and 3mm hex nut
A custom replacement debris‑trap basket for Gaiger roof water collectors. Fits an 80 mm opening with 50 mm depth.
Used a thread cutter to cut a thread into the baseplate & m8 threaded rod. Wooden clothes peg and a m8 hex nut make for a good stop solution. I used PLA+ for it - PETG is probably the better solution.
Quick Setup Drill Depth Guide I did not use drill depth guide before and sometime I regretted it. Now there is no excuse, as I always have them with my drill bits. Design Features: Quick to setup. Just set the distance between the stopper…
Keep your tires safe and legal with this compact Tire Tread Depth Gauge ! This tool helps you instantly measure tread depth to see if your tires still meet the legal minimums: Winter tires : 4 mm reference Summer tires : 1.6 mm reference…
I have a pedestal drill, but it is guarded by two fearsome miniature goats, and it's not suitable for every project. I wanted a way to use my hand drill accurately for quick jobs, by adding a way to ensure holes were straight/square, plus…
This is a set of Depth gauge for 5-12 mm drills. They have a opening for M3 nuts an cylindrical screws to tight the stop on the drill bit. Printed with PETG @ 0,2mm layer hight with 20% infill.
Drill depth stop used to drill multiple holes at the same depth easily. The default settings are for CHC M3 bolts but the parameters can be tweaked for any drill bit size and any bolt size in Freecad. Note: If you want other sizes and…
I don't like drill stop designs where a screw touches the drill bit, as they tend to skew on the drill bit, especially on drill bits with thin blades, like wood drill bits. With this design, the whole inner surface of the drill stop holds…
Print Settings Layer Height: 0.2 Flat Top vs. Angled Top The flat top version has nicer lettering and is more neat, but one might prefer an angled top to avoid damaging wallpaper.
Two versions, one with embossed text, and one with raised.
Print them and use an M3 Bolt and a nut. Then clamp them around your drill and use them as a length measurement for your hole you want to drill. I used no infill and 3 perimeters which works very well.
Size cca 85x60x55mm. Design versions A, B, C, D. Versions for max. Phone depth 9, 11, 14, 17, 22, 27mm. Tested. Second version:
I designed these to replace the popsicle sticks I had been using when rolling out sections of polymer clay for cutting. Each gauge is 160mm or ~6.25" in length. Long enough for most silk screen sheets. I printed my set with a 0.4mm nozzle…
I needed a Depth Measuring Bridge for my Mitutoyo Digimatic Absolute AOS Caliper. (You can read my - german - Review of this Caliper here ). Because I needed it today (when else?), I "desingned" one from scratch. OK. The price was another…
This jig was designed to prepare the back of drawers using the specifications required for Blum TANDEM undermount drawer slides. Other overseas brands found on Amazon often copy these specifications for undermount drawer slides. Features…
This is a tire tread depth gauge you can use to test your tires to see if they need replacement. If you live where it is wet you are good until your tires are at 4/32" or 3mm of tread depth. If you live where it snows it is recommended to…
This is really well designed, but I needed it to fit my specific space requirements. In the off chance you can't fit the original because it's too deep and the remix I'm remixing from is too shallow, well here you are! Since modifying STL…
Pipe connector three-way corner piece 90° for pipes with a 16mm diameter. 50mm depth. Can be scaled up if necessary for larger pipes.
This thing is my 2nd depth art. First was the FOX which was very popular among users. The extruded line art is inspired by the very talented illustrator Jérémie Pistre. Check out his works on instagram.com/jeremiepistre Print instructions…
I have always hated the “grubscrew against the drillbit” -type depth stops, they never lock where you need them and I don't like clamping against the thin-ish flutes.. Saw similar available in metal, but plastic works fine, as long as…
This is a customizable Schlage SC1 House key (5-pin) with label. Download the SCAD file and open it in OpenSCAD. On the right hand side click on parameters and enter in your key coding. I have also uploaded a full set of Depth Keys using…
This drill guide is designed for a Dewalt DCD776-EX but should also work for drills with collars around 54mm. It fits by friction and should push on and pull off. It boasts a primitive but effective depth gauge. Just twist to raise or…
English: Test the tread depth of your tires with this tread depth gauge. Also an ideal and inexpensive gift for workshops to pass on to customers. 1mm - 1,6mm (minimum tread depth - EU) - 2mm, 3mm, 4mm (winter tire - minimum tread depth,…
This is a set of models for an adjustable depth gauge intended as a woodshop aide for setting a Table Saw's blade height, a Router's bit height or a Drill Press's plunge depth. That's what I use it for but I'm sure there are other…
19" 1U Rack Mount Shelf 150mm depth
I needed a depth stop to drill in some MDF boards for a simple cabinet I was making. I couldn't find a suitable model on Thingiverse for the diameter I needed and the fasteners I had on hand, so I designed one myself! I decided to upload…
Rear suspension IFP depth setting tool
Fishing lures that i made for my father (to be tested in rio parana Argentina next month) Print Settings Printer Brand: Anet Printer: A8 Rafts: No Supports: No Resolution: 0.2mm Infill: 100% Filament: ColorUp PLA White Category: Animals
A collection of depth stops for drill bits. An OpenSCAD file is included so you can customize them for a better fit or create additional sizes. bit_size is the diameter of the drill bit in mm. This also automatically adjusts the labels on…
If you like my designs please consider donating a coffee or any amount really, I appreciate the gesture. https://www.paypal.com/donate/?hosted_button_id=QEF27KJ6FXGM6
Markings for 1,6 m.m on top (standard min depth). 10, 4 (recommended min winter tire) and 3 (recommended min summer tire) mm has longer markings. Print in place with color change. Twist gently to loosen the pin. It should stay retracted…
Poop bucket sized to have the same depth as the rear spool holder
Remix of existing model by SpamBouncer modified to fit my Calipers. Channel for the Caliper Main Scale has been increased to support 16mm width. There are 2 versions both support Caliper models with Main Scales that are 16mm wide. I…
Tire profile measuring device, with this you can easily check whether the tire profile is still suitable. 1mm 1,6mm (minimum tread depth/Mindestprofiltiefe! - EU) 2 mm 3 mm 4 mm (winter tire - minimum tread depth/Mindestprofiltiefe…
4 Color HueForge model. Rope Ball Depth Illusion made using Sunlu and Esun PLA+ common colors. Print at 0.08mm layer heights, 0.16mm first layer. 100% infill (Rectilinear) Black until layer [email protected] Blue until layer [email protected] Light Blue…
Side baskets for IKEA Pax (depth 35 cm)
Simple tool for router bit depth setting. Gauges have a width for ½ inch (13 mm) bits. Imperial one have 1/16 increments (1/16 to 1 inch), Metric one have 1mm increments (1 to 16 mm) Enjoy and feel free to leave a comment :)
Usage: turn the knob clockwise to expose the pin a certain amount and read the measured distance off the side where the line of the slide and markings on the side align. Uses M3 countersunk screw to attach the knob to the piston. To…
120mm fan adapter blocks with a 25mm depth these fan blocks will accept M3 threaded inserts
Created using Zack Freedman's Fusion template: https://a360.co/3ccHbsg Copyright (c) 2023 Zachary Freedman and Voidstar Lab LLC
Mit diesem Upgrade zeigt die Makita Sage endlich die Exakte tiefe an der Skala mit Führungsschiene an. Einfach das Original Teil abschrauben und dieses quasi als Unterlage darunterlegen und die Schraube wieder montieren. Die Montage ist…
Tire valve cap removal tool with depth gauge. Modeled from original Opel design. Material: PLA, PET-G etc. Layer high: 0,2 or lower Supports needed
I needed a depth stop to drill in some MDF boards for a simple cabinet I was making. When I designed this, I couldn't find a model for the diameter I needed and the fasteners I had on hand, so I designed one myself! I decided to upload a…
Drill Bit Stopper - Depth Stop Ø 4.5 / 5.5 / 6.5 / 7.5 / 8.5 / 9.5 mm M3 Thread Hardware needed: Screw DIN-7985 PH1 M3x16mm Updated 23/05/2025 Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx
Depth Gauge guide for sharpening a chainsaw chain use like the guy in this vid. Category: Outdoor & Garden
Depth Stop to remove dust from concrete drilling or wood working From 5 to 12 diameter, to fit with all drills diameters Need M3x12 Screw and bolt
I printed it with Bambulab P1P with AMS.
This design is based on the original product (reference 050083-10 ) and is specifically made to fit the 500 series Mitutoyo calipers. It is also compatible with calipers that have a 16x3.5mm blade. The model is designed to fit neatly…
This is used with a 1" wide metal ruler to measure the distance from your router bit to your fence. It has a ¼" and ½" indents for both size router bits shanks. Uses a M4 nut and screw to lock the metal ruler into place. Enjoy!
Note : I've only printed the “ 100mm ” variant of this drawer and it works with the original brackets created by the author, KYZ Design.
My wife asked me to make a couple of custom depth guides for working with Polymer Clay, so I figured I'd share them. Enjoy! 2mm and 3mm thickness.
Magnet applicator for both poles marked + and - . Dimensions are available from 4mm to 10mm for a depth of 2mm and 4mm to 15mm for depth of 3mm. If anyone would like deeper or larger just say I can adjust and share. The depth is measured…
Simple floor stand for guitar (acoustic guitar). It’s important to note that this stand is designed for guitars with a 10 cm base/body depth. Easy print — does not require dense infill or supports. The stand may show some instability. Due…
I found that if you do not use a magnet some space (and plastic) is wasted in the bottom. It just made the base just a bit more deep, maybe some1 need it or what to make also the other model.
I liked the Quick Setup Drill Depth Guide from Highrise Workshop and the Rugged Box from Whity was also on my list to print. Because I have no DeWalt Drill set I thought I'll adapt the Rugged Box to fit the depth guides. You can find the…
Guides for rolling out pastry dough to a uniform thickness. Guide sizes are 1/8", 1/4", and 1/2" with a case. The guides can be stacked on top of each other to create other thickness, e.g. 1/8" + 1/4" = 3/8"
Caliper with depth gauge. Jaw length 4 cm. I recommend printing with light filament, then the numbers are better visible on the scale.
Drill Bit Depth Stops - Ø8mm M3 Thread Hardware needed: Screw DIN-7985 PH1 M3x16mm Hex Nut DIN-934 M3 (only for NTV version) Updated 18/10/2025 Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx
Thanks to Just Joshi for this original part. The Shelf has a depth of 18cm. There are 2 variants in the width, one with 18cm and one with 20cm. Therefore it fits on all 3 Skadis models. For the 76cm Skadis board you take 2x 18cm + 2x…
You can print the enclosure laying on its side. No supports required. The printer can bridge those small panels.
Drill Bit Depth Stops - Ø5mm M3 Thread Hardware needed: Screw DIN-7985 PH1 M3x16mm - M3x12mm Hex Nut DIN-934 M3 (only for NTV version) Updated 18/10/2025 Resize to adjust dimension If you download/enjoyed this file, please leave a like -…
I needed to fit a catflap into my workshop and didnt want to spen a ton of cash on SureFlap tunnel extender. I printed this with 10 walls just to make sure it would be watertight and 50% infill. I printed it useing PETG to allow it to…
You need high resolutions
Drill Bit Depth Stops - Ø6mm M3 Thread Hardware needed: Screw DIN-7985 PH1 M3x16mm Hex Nut DIN-934 M3 (only for NTV version) Updated 18/10/2025 Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx…
I designed electrical outlet stand-off spacers for securing outlets to the electrical box while keeping the outlet flush with the exterior wall surface; that model is here: However, when installing and sizing these spacers, it was kind of…
Caliper depth measuring foot to fit an unbranded vernier caliper with body dimensions 16mm * 3.5mm having small plates on both sides I added a headless M3 screw to secure the caliper in place but a standard M3 screw can be used too…
Parts for my son's RC Boat project, Project 183 Motor Torpedo Boat.
This is an updated version of the "E2 SM" selector which should have the correct R2 blade holder depth Print the same as the standard part, you'll also need the updated official blade "clamp" part. Update log: Mar 16, 2020: No change,…
The minimum plunge depth of the Festool Domino DF500 joining machine is 12mm when using any Domino size other than 4mm. When joining material to the face of 12mm plywood a plunge depth of less than 12mm is desired. This attachment for the…
Drill Bit Depth Stops - Ø10mm M3 Thread Hardware needed: Screw DIN-7985 PH1 M3x16mm Hex Nut DIN-934 M3 (only for NTV version) Updated 18/10/2025 Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx
I needed some modular drawers so I made these hexagon modular drawers, there are 4 styles and all come in 3 depths, 100, 150, & 200 mm depths. I printed the Enclosures on .2mm Speed and the drawers on .15mm Structural, leave the…
Original knob would sink too deep on the pot so I made it more shallow so it can still click just fine. Looks identical to original. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 20…
Made this for my router table since the depth gauge I bought wasn't wide enough to reach both sides when the router plate was off. To make it easier to read I did a filament swap on layer 58 then again on layer 60 when printed at .2
Depthstop for drills with Collets and Nuts.
Esta es una herramienta de medición para calibrar la profundidad de corte o fresado, tanto en fresadoras como en sierras de mesa. Es una versión creada partir de un modelo comercial fabricado en metal, del cual pongo una imagen donde se…
I really like the three sided portable hangboards created by other authors, but I wanted something with a wider variety of depths. Here's my five sided portable hangboard with depths from 25 mm to 5 mm. Adjust the print settings based on…
I designed depth stops for my Forstner bits to reliably drill holes of the same defined depth every time. This is a Fusion file into which you can enter the diameter and height of the sheath, as well as the diameter of the shaft, using…
A no-support needed 3D print for a Mitutoyo 6-inch AOS (500-196-30) Caliper Depth Gauge Base / Bridge. Printing Printed with Silver Prusament PLA on MKS+. Print with the widest flat part down to get the most accurate measurements, it will…
This fits a German passport. Other passports may not work if they are of different dimensions. It fits if your Passport is 130x95x4 mm or 130x95x5 mm. If your passport holder works with your passport work, please tell me. With engraving…
Highrise has nice depth stops but the holder does not fit in the newer Dewalt drill cases. The new cases have transparent plastic on one side and yellow plastic on the other side. The new case can be linked together which is an advantage…
I took some inspiration from mishkin2 's model and made my own version for M4 hex nuts (to be pushed in) and made versions from 2, 3, 4, 5, 6, 8 and 10mm. I also made a parametric .f3d where you can change the diameter of the drill and it…
Drill depth stop used to drill multiple holes at the same depth easily. You'll need a M4 Hex Nut and a M4x16 Cylindrical Bolt for the standard settings. You can use the STEP files with the Prusa Slicer directly. Print Settings 0.6 mm…
Caliper depth measuring foot to fit a Shahe digital caliper with body dimensions 16mm * 3.5mm I added a headless M3 screw to secure the caliper in place but a standard M3 screw can be used too (although the fit of the caliper is already…
When you have a tool and a component breaks, it can slow down your entire project. Even if the part is inexpensive, if you are ordering the part you still have to wait for it to be delivered. My 10" Ryobi Drill Press (DP103L) Depth…
This is a drilling depth stop with a basket rotating on a thrust bearing, thanks to which it leaves no trace on the wood's surface. The basket has large openings, so the chips don't clog the drill bit's flutes. I've first seen this design…
I wanted a depth map of Lake Superior and was able to find https://www.thingiverse.com/thing:3570708 which had the other Great Lakes but was missing Lake Superior. Fortunately, it included a link to the data set (…
Hey, this is a Depth Caliper which is useful to measure the depth. To be clear right from the start, you shouldn't expect the highest precision from a 3D-printed caliper. You can measure well with it, and I would say the measurement…
Drill Bit Depth Stops - Ø4mm M3 Thread Hardware needed: Screw DIN-7985 PH1 M3x16mm Hex Nut DIN-934 M3 (only for NTV version) Updated 18/10/2025 Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx
Drill Bit Depth Stops- Set 2.0 - 3.5mm Available dimensions: Ø2mm Ø2.5mm Ø3mm Ø3.5mm Hardware needed: Screw DIN-7985 PH1 M3x16mm or M3x16 SHCS Machine Screw AA039 Hex Nut DIN-934 M3 Resize to adjust dimension
Magnetic mount for depth gauge manual level the bed. The hole diameter is .250 for the depth gauge. Link for magnet is below. Note: Make sure you have your printer in a spot its going to stay. These big printers like to flex and don't put…
This drill guide is designed for a Dewalt DCD776-EX but should also work for drills with collars around 54mm. It fits by friction and should push on and pull off. It boasts a primitive but effective depth gauge. Just twist to raise or…
