742 modeli
UPDATE: My pattern didn't work properly so the measurements aren't accurate, just use them as a rough guide Workable area is 8.5", perfect for Letter (8.5"x11") sheets turned sideways, markings are imperial with 0.25" (6.35mm) spacing on…
English Description This is a functional 3D-printable pocket hole punch with a clean and practical design. It is sturdy, easy to print, requires no supports or overhangs , and features a highlighted center mark that remains visible even…
2D ART of one punch man Print instructions 1.2 layer in one color the rest in other color
Designed for Coptic stitch bookbinding technique Workable area is 8.5", perfect for Letter (8.5"x11") sheets turned sideways, markings are imperial with 0.25" (6.35mm) spacing on center of each 0.13" (3.3mm) hole. Markings are recessed…
I remixed the "Manta Ray Face shield" by Joe Telling to fit the european 888 hole punch standard.
Hey there, i made this tool holder cause i noticed that you have to be very precise with the letters not to smash your hand. I work in a locksmith with my grandfather and we mark every key we copy with the letter “R” in order to ensure…
F3 logo contoured keyring with punched out logo. Simple keyring that can be printed in no time at all! Keyring is approx 2mm thick with a punched out logo making it light, sturdy and quick to print with minimal filament. For best results…
Simple protective case for the blade 30mm Leather Punch. Print instructions: I decided to use PETG. Printing the model does not require any special settings. See the attached 3MF file for detailed print settings. Assembly instructions:…
(pour le français, voir plus bas) Clap closure for the base of the punching bag “Outshock Boxing Machine 100” Switzerland: https://www.decathlon.ch/fr/p/boxing-machine-100-gonflable-adulte/_/R-p-308689 France:…
Please support this model it will go a long way and help with design better versions just by liking and downloading 😀 Print Settings Supports: Optional Rafts: Optional Resolution: 0.2mm Infill: 15% Filament: Pla Assembly You will need all…
its a mini swivel punching bag not much to it all you have to do is put the main stick through the plate you can tape it if you want then put the smaller stick through the hole in the bigger one then place the swivel part that you hit on…
This case fits a set of Hiltex metal punches. They are heavy--their original case quickly broke at one corner as it was not strong enough. If it does not fit your set, use the scaling capabilities in the slicer to adjust it. Pro tip: cut…
After I designed my magnetic drill chuck key holder, the world of attaching things to my drill press grew considerably. So, since the Center Punch is often something I'm looking for, I designed this simple brack that attaches to it and…
Edit July 17 2023: Added symbols $ % # € ! ? & Edit August 6 2023: Added special characters like Ü Ö É Ç Å At 100%, the letters are roughly 13mm tall (or about ½ inch). I tried scaling down to 65% (8mm letters) and that still worked. Try…
The remake of Puse RC1 and RC2 face shield. RC3 is mix of RC1 and RC2, it has extra space for glasses/goggles and better side protection. If you are printing it for someone else, please wash hands very well and carry mask/shield when…
I designed this knife in late 2020, early 2021 based off a keychain my friend had. Although I know there are many designs like it now, I was unable to find any prints on any other sites so I opened up Fusion and set to work. It was one of…
F1 logo contoured keyring with punched out logo. Simple keyring that can be printed in no time at all! Keyring is approx 2mm thick with a punched out logo making it light, sturdy and quick to print with minimal filament. For best results…
F1 logo fob style keyring with punched out logo. Simple keyring that can be printed in no time at all! Keyring is approx 2mm thick with a punched out logo making it light, sturdy and quick to print with minimal filament. For best results…
This model has three parts and prints with no supports, the bag screws together with threads and has holes to put catnip inside. It may be smart to scale down the top of the catnip container in the X and Y, but I was able to wear in the…
Pillikan is a very easy-to-print pill puncher to help elderly or disabled people open pill blister packs. It helps to apply the required force to easily open the blister pack on almost any size of pill. The small container underneath will…
Behold: the Pill Popper. For when your fingers have blisters from popping all the pills out of the blister. Has a little box to hold the pills so they won't fall down, and has some structural supports so it won't break easily. Printed…
Fits Leviton and other Cat5/6 (RJ45) Brand Keystone Jacks
Take out some stress or just fidget as you think with this miniature punching bag. Built using a 24mm long, 4mm OD spring I got from a pen. Used tape to stick to secure to desk. For sizing the gloves, what worked for me was using calipers…
This is a tool to help you find the centre line of a leather strap or belt, and then mark holes at an even spacing along that centre line. Ideal for making clean and professional looking belts, straps for harnesses or other tack. The…
Universal PUNCH BUTTON & CO2 Cylinder Opener/Tightener for Umarex T4E HDR/TR50, HDR/TR68, HDP/TP50 & HDS/TS68 - Cal.50 & Cal.68 airguns. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: Yes Resolution: 0.15mm…
Ever find it difficult to punch stitch holes in leather? Or afraid that you make too much noise hammering your fork punch and disturb your neighbours? PRESSLY can help! Using its arbour press style rack-and-pinion mechanism, you can…
NASA Worm logo contoured keyring with punched out logo. Simple keyring that can be printed in no time at all! Keyring is approx 2mm thick with a punched out logo making it light, sturdy and quick to print with minimal filament. For best…
The model has a 3.5mm diameter hole in his toe, 5mm deep and another hole in the Rock stand 15mm deep, allowing the insertion of a steel rod or 2x10mm long magnets. Print instructions Supports are required to print the model correctly. I…
Kindly "LIKE" if you download Donations welcome at MetaMask: 0x60336dD01af8f8542Ab7F263b02F87302c83b5f2 Bitcoin MJB Monetary Metals Coin Redrawn in 3D from scratch 12cm diameter AutoCAD file STL in 3 versions: -2 colors, for dual…
Update This design has been superseded by a newer version, Pill Puncher 2 Generator . Description I have seen several of these pill pusher/punchers for blister packs, but all upload only one size that is almost guaranteed to not fit your…
Cardboard is such a wonderful material for kids to create with! It is readily available, cheap, and safe. However, it can be very difficult to punch holes into cardboard - you can't use a normal hole punch and it is dangerous to try and…
This is a self-help device to push and take a pill from their container of blister packs. The principle of leverage is used to easily open a blister pack. The design is for most popular Japanese medicine forms and sizes, like pills, small…
It can be difficult to punch out a pill from a blister pack, especially if you have arthritis. This tool makes it very easy to punch out several pills, for example when you need to fill a pill container with next week's dosis. Print: If…
I now have to take a blood thinner every day. These pills (ASS100) are so tightly closed that I can hardly get them out by hand. So I looked for a pill puncher, found a nice one , but it didn't work at all with my pills, so I had to make…
UPDATE3: Uploaded STEP files and F360 files. UPDATE2: Updated model that uses a standard 4-hole punch (80mm between all holes) UPDATE: I have created a model that fits the original Prusa hole pattern (60 mm between the middle holes and…
Punch button for the HDR50 Gen2 (the CO2 cylinder percing button come with a different design in gen2 then in gen1) In the “wait position”, the punch button is “twisted” (something around 27,5°) When the punch button is hit, it turn and…
Good Knuckle Duster fits most hands. Solid design even at 5% infil. Use 50%+ inffil for solid and heavy duty puncher. Two versions available: flat faced or tapered. Enjoy for personal use and friends. Please don't use it commercially.
A simple hand tool that helps you pull stitch chisels out of the leather without damaging anything. 60mm x 35mm x 40mm Very lightweight. Works perfectly with cheap beginner stitch punches/chisels. Leave a comment if you try it with more…
Remix of RC3 3-hole punch 6x stacked face shield. With support ends and without. 3mf file includes supports. 3mf file setup similar to Offical 4x stack from Prusa. There is also a 3mf file for a Creality 3D 10S Pro to print 18x at once!…
This is a jig to help you punch folios (sets of paper that are to be bound together into a book). The included jig is meant for paper 200mm wide (before trimming), but I've also included the fusion 360 file if you want to edit it yourself…
I realised that people like to try a new hobby while staying at home. However, this usually means they need the tools and materials for it, delivered to their homes. As these products are not considered as necessities many companies are…
# OpenSCAD Fully parametric drawer cable storage management hive with punch cuts (openscad-hex-cable-hive-fully-parametric) OpenSCAD Fully parametric drawer cable storage management hex hive with punch cuts This is an OpenSCAD sketch to…
Remixed the original design to have a better axle and handle attachment system. Also, include Fusion360 file.
These punches are used to drive new shift detent pin bushings to the correct depth in the ZF5 transmission case. These are BMW special tools 232360, 234022, 234023, 234021, and 233110 These punches are based on the drawings from the…
Punch-out card of a decorated Christmas tree. Available in bank card format and a bigger one with tree being around 10cm that can be added to a post card. 0.8mm thickness for both, which seemed perfect thickness after few tests. Happy…
Its a donut (or doughnut?) cutter, it was faster to print then to buy one Makes 3 inch OD, 1 inch hole little mother*****rs! Print in PLA\ PETG (share your donut recipe in the comments)
Holder for 8 piece, Pittsburgh punch set from Harbor Freight.
Even during coronavirus quarantine, you can have fresh kaiseras daily Print instructions Rafts: No Supports: No Resolution: 0,2 Infill: 25% Filament: ABS
This set of three cookie cutters allows you to cut bait to certain dimensions. Practical if you use dough or even bread for your fishing sessions. This way you can easily cut the size of the bait you are looking to obtain. I offer three…
Printing instructions: Layer height: up to 0.24mm for fast prints I recommend PETG for longer lasting hinges, but I used PLA and it works fine. The stl files are upside down, print them laying flat so you don't need supports. If you want…
This is a remix of the high speed print version of the Prusa Protective Face Shield. It uses 3d printed clips eliminating the need to punch holes in the plastic sheet. The clips are slid onto the frame over the plastic to hold it in place…
Introducing the "Single Shot Tray" – a 3D model designed for Kral Puncher Breaker air rifles. This innovative accessory replaces the traditional magazine, allowing for smoother shooting without pellet jams or deformities. Our design…
By request by my daughter, here is "Buff Arms Kirby". It is a remix of https://www.thingiverse.com/thing:3051355 and https://www.thingiverse.com/thing:4862154 Enjoy! Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No…
Gridfinity bin for automatic center Punch
- 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) If you’d like to shoot some spare change or a dollar my way, you can donate here (paypal). (check out my profile for…
introducing the hole punch keychain! the ultimate keychain that with little bit of pressure on the top can create a holes on the paper. the paper can be then stored properly in folder. first connect the two pieces together as shown and…
OpenEDS - Pill Puncher This tool is the 3rd of the OpenEDS collection . OpenEDS is an open-source initiative for Ehlers-Danlos Syndrome people to made life easier and less painful. Description The PillPuncher tool is really simple to…
Inspired by @werz99 Book Binding Cradle, this book-binding punch jig has hole pairs spaced for 10mm or 3/8in fabric tape every 25mm, ruler markings on both parts, ISO paper A and B-format size markings on cradle base for reference,…
Just a quick punch for you fans out there
This is a significant revision of my Pill Puncher Generator . It adds an option to create an additional piece hinged to the original. That makes a top arm with the puncher, a middle arm with a hole for the blister, and a bottom arm with a…
Thanks to Wekster who inspired in making this mini dudes based on his design. This is Saitama aka Caped Baldy aka One Punch Man Here to be your hero for fun Support me on Patreon: Print instructions If you are making your own gcode you…
I liked the changes that @titleunknown_285431 made to the Pressly by @Wallnutts_278875 , but I didn't have a heat-set insert for the ¼" bolt and I didn't feel that a single slot for the punch tines would work well for my purposes. I also…
Leather Punch set organizer for standard Leather Punch Sets. This is simply made to keep the Punches from rolling around my Leather tool kit.
PLEASE DO NOT SELL OR CLAIM THAT THIS IS YOUR MODEL!!!! I MADE IT AND IT TOOK ALOT OF EFFORT AND WORK! anyways I really enjoyed modeling this. It taught me a lot about shapes and how to model said shapes. BTW I made this on a Chromebook…
This was specially design to hold Belden's CAT6+ keystone . But will very likely work with other similar style keystone connectors. Nozzle = 0.4mm Layer = 0.3mm Perimeter = 3 Infill = Gyroid 15% Support = can be done without, but if…
Designed to fit Porter Cable and Black and Decker Type 340/341 series sanders. Confirmed fit for: Dewalt DW411 Type 2. COULD ALSO POSSIBLY BE COMPATIBLE WITH: DeWalt: DW411 Type 1 Palm Sander DW411 Type 3 Palm Sander DW412 Type 2 Orbital…
This is a remix of the RC3 headband which uses U.S. letter-size plastic with a standard 3-hole punch. Hat tip to Avi Burstein, who did a similar remix of the RC2 design Print instructions Print with no supports.
Gridfinity 3x2x3 holder for Harbor Freight 8pc. Pin Punch Set https://www.harborfreight.com/8-piece-punch-set-93424.html Also seems to fit Starrett 565 punches but not tested all sizes.
I would suggest 100% infill, But if it works with less than Please let me know.
A pegboard holder for a set of brass pin-punches. I have attached four versions: With, and without the sizes printed on it (in case your selection of sizes is different from mine. With the punches straight up/down, or tilted outwards at a…
Print in PETG, supports are designed into the model. You only need to buy a clamp and find a way to heat up your boot to about 80°C. I don't have a heat gun so I partially submerged my boots in almost boiling water for 2-3 minutes (I have…
NASA Worm logo fob style keyring with punched out logo. Simple keyring that can be printed in no time at all! Keyring is approx 2mm thick with a punched out logo making it light, sturdy and quick to print with minimal filament. For best…
Adjustable Straps for Face shield - A4 binding sheet - easy punching Print two straps per Face shield. Another mix of the FaceShield made a plastic strap due to concerns about fabric elastic bands harboring virus that is hard to kill.…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Example print in images was printed in PLA 15% infill. Supports needed below cutters and fist.
I remixed Prusas RC2 face shield so it can be used with A4 paper format for makers who don't have access to a laser cutter. The holes can be made with a standard hole puncher that has option for punching holes in A4 format paper with four…
Punch card pipe organ A while ago i saw a pipe organ playing music from punch cards, by using the holes in the cards to activate the different pipes. You can see an example for this in the following video: I wanted to make a simplified…
I found the spec sized magnets were a tight fit, so I made a punch to smack them in place with a hammer. Also a pin for the jaw for those who don't have the right sized fasteners on hand. Cheers!
NOTE: The current version of this design is RC4. Refer to the changelog at the bottom for version differences. The bottom design has not changed since RC1. This is a remix of the Prusa RC2/RC3 face shield redesigned to provide better…
Complete set of TPU parts for the Piratframes Punch097 and Shorty098 freestyle frames. Files are organized in folders by category. Filenames tell you everything: - PS- prefix → fits both Punch and Shorty - PUNCH- prefix → Punch specific -…
Adjustable Straps (Version 2) for Face shield - A4 binding sheet - easy punching This version is easier to connect and holds together more securely by incorporating a second hole that allows the pegs to snap into place. Print two straps…
This is an alternative design to the bottom piece for the covid19 face shield. It's designed so a standard office hole punch creates holes which line up with the grips in the print. Holds firm on 100 micron acetate (OHP) sheets. This now…
I want to add my own custom notebook/journal page into A5 ring binder notebook but can't find the easy way to do it. I have Muji and Kokuyo binders so I design the jig that will work for both. This jig should be working with a 6mm single…
I recommend printing technology SLA, SLS or SLM.
But this is a simple print to use as a spacer so you can easily hole punch plastic to make a face shield for the 3dverstan face sheild (north american) https://3dverkstan.se/protective-visor/protective-visor-versions/ Swingline used…
20 Orienteering Control Punches. Layers : 0.15 PLA
SpaceX “X” logo contoured keyring with punched out logo. Simple keyring that can be printed in no time at all! Keyring is approx 2mm thick with a punched out logo making it light, sturdy and quick to print with minimal filament. For best…
Saitama from one punch man - cookie cutter model. The file is about 60 mm tall and can cut up to 8 mm dough and can be printed with a 0,4 mm nozel and 0,2 layer height. Its a 2 piece item, one for cutting the cookie dough and one for…
I've not tested this yet, as I've got to fix something on my printer before I can test and adjust it, but I wanted to get it up. I've designed this with the following in mind: Misumi rails (so m5 tap) These taps (again m5):…
A sign that reads "Please do not PUNCH the printer"
Pretty self-explanatory if you ask me. Settings: Random Seam , for smoother action 0.2 mm Layer Height 15% Gyroid Infill 2 Walls
Punching cradle side wall can be combined with plywood 9mm wide x 4mm thick, or with 3d printed sides to form a full punching cradle. The gap is 2mm wide. I printed it in PETG and it works well. This model is slightly different from the…
Our own development is based on a remix of the original Prusa mask, which is a bit narrower and has an optimized hexagonal cutout. Our own adjustments / improvements are: Stackable version without support material fits on Prusa Mini print…
Includes two separate sets of templates for cutting out face shields for the Prusa RC3 Face Shield. One template is for a standard single hole punch and one for a square single hole punch. I recommend the square type, otherwise you'll…
One Print Assembly Punching Ball (fits on your desk) This spring mounted punching ball loves to be kicked and slapped. Train your left on this ball to ultimately beat the Bobbleheads :-) It's strong – are you? If so, it is recommended to…
So I couldn't find this anywhere else so I figured I'd make one. My Makita finishing sander came with one, but I guess that's normal for square, latch-y type sanders. It's a jig to punch the vacuum holes in your 5" sanding discs. I mean,…
Five finger death punch Band Sign As with most just resize to what you want and color if you have a color printer. I tried to keep the logo’s as original looking as I could, I made these for my wall not to sell & figured someone else…
Holder for various chisels and punches
