Liczymy pasujące modele…
PVS-31A Night Vision Specs Adjustable you can use the supplied printed rods to attach the lenses or use a long bolt and nut. Use HollowSpecs. For hollowed out lenses. (you can see through them)
Welcome to the PVS-69 Alpha 1.1 release This pack contains the files for the 69 Alpha Bino, Mono and the battery pack. hardware kit and parts lists are available on vonscherfarms.com
UPFRONT: I just created an Discord server for the PVS420 so its easier to talk about and share thoughts, ideas, improvements. All further updates to the design, functions and software will be available on my Discord!…
The L3Harris Binocular Night Vision Device, also known by the military nomenclature AN/PVS-31A, is a compact, lightweight, Generation III high-performance white phosphor dual-tube goggle……But this thing is only a model, if you want to…
Join the PVS420 Discord where you can find the ongoing development of the PVS Nachtmahr and much more. https://discord.gg/Ce9BJ2DK3j Archiving 1:1 perception by using a 640x512 x9 thermal camera using a 0,39" display and a NP18 lens +…
Join the PVS420 Discord where you can find the ongoing development of the PVS GREMLIN Including firmware, updates and much more. https://discord.gg/Ce9BJ2DK3j The New N6 and P6 thermal cores available with a 9 and 13mm lens and 640…
Join the PVS420 Discord where you can find the ongoing development of the PVS GREMLIN and much more. https://discord.gg/Ce9BJ2DK3j The PVS "GREMLIN" features some impressive specs for its low price including a 640 resolution thermal core,…
Copy-paste of Creative-Extension11 's wonderful DIY Nods. All info is included in downloads. Please notify me if anything is missing. The EnVeeGee is a digital-only refinement of the PVS-69 created by VonScherfArms. Using the technology…
UPFRONT: C6 Core was just released and the link updated! listing is still in screening process and should be accessible from 20.06.26! Core arrived and its a worthy sucessor to the P6 providing an even better less grainy picture with high…
Habe das geniale PVS-69 alpha Modell als Basis genommen um ein digitales Nachtsichtgerät zu realisieren. Zum einen, um mich in das Modden und Modelieren einzuarbeiten und zum anderen das programmieren des ESP32 Board zu erlernen.…
UPFRONT: I just created an Discord server for the PVS420 so its easier to talk about and share thoughts, ideas, improvements. All further updates to the design, functions and software will be available on my Discord!…
This adapter allows you to mount your PVS-7 to modern dovetail interfaces. included are 2 versions, to either place the Dovetail on the under- or upperside of your NVG. with this it is possible to attach your PVS cheaply and pretty…
Parts list: Battery contacts: 100 stücke Batteries chrapnell aa oder aaa Batterie feder 5 Nr. Positive und negative Metall batterien Feder kontakt platte ersetzen - AliExpress 13 Power outlet connector: ( Male and female) 1 Stück 5,5 x…
Print with multiple walls. Max 0.2 layer height. You need 1x m5 nut and 1x m5 bolt. Printing orientation as shown in picture, does not need supports.
This is a 3D-printable hobbyist model. It is not designed to meet military specifications or for use with restricted image intensifier tubes. Users are responsible for complying with their local export and firearm laws." The pictured…
Model is version 2 of my PVS14 friction lens cap. Design is to more easily allow photography/Video through a PVS14 image intensifier. Design was fitted to a TNVC Milspec PVS14 rear lens, tolerances between parts may require scaling up or…
Hello, I used my revopoint pop2 to scan a PVS-14 night vision device. The model has a lot of detail but isn't flawless. I've uploaded the complete model and a cut version. I printed the cut version without any supports and glued it…
A GoPro clamp on mount for a PVS14. Connects using standard GoPro mounting screws and nuts. It took quite a few iterations to get the mount and arm the right length and position. Fun little challenge though. Print Settings Printer Brand:…
Model to print in different colors at different heights. Print settings: Step: 0.2 Shell: 3 Infill: 30% Supports: Yes Filament: PETG Prusament (Black; White)
Friction Fit: Holds the GoPro tight enough to carry the monocular like a camcorder. No Tools Required: Easy push-on installation. Optimal Alignment: Ensures the GoPro lens is perfectly centered over the PVS-14 eyepiece. Lightweight:…
OpenPVS14 https://github.com/chanmin723/OpenPVS14 Open-source DIY PVS-14 compatible housing. Works well with MJF printing—optimized for PA12S, but PA12 may also work. The upper housing shown in the photo above is a printed example. 3D…
Measured from the real deal. Slight modifications for better printing, as well as the loose/tighten assist notches. Literally works better than the original. No supports needed. PLA+ recommended.
This is an adapter to slave an ATN AN/PVS-14 with the Canon EF-S 18-55mm f/3.5-5.6 IS STM (typically included with the Rebel T7) and other Canon lenses. To assemble, remove rubber eyepiece shroud from the PVS-14 and place two halves of…
Print at .1mm layer height Use Arachne for wall infil otherwise it turns into swiss cheese for some reason. Use Normal supports (auto) (Has only been tested out of PLA pro, please let me know how other filaments turn out)
Onshape CAD link for those interested in making changes in the design: https://cad.onshape.com/documents/143c740f42cb21cc45906fdf/w/4bc4bac1614f8c690bb5c467/e/82f31ec3f743aeb42d9d5409 Changes, 19/5/26 - added file for old housing…
Replacement PVS-14 ocular lens cap. Only tested using flexible filament so you might run into issues with fitment if you use a rigid plastic. There is more than enough clearance to have a demist shield installed.
This model is a Adapter for PVS 14
Adapter which uses a PVS-14 eyecup retainer ring to mount to camera objectives which use standard 49mm filter threads, such as the Canon EF-M 15-45
This is a large 220mm (L) x115mm (w) x125mm (H) basket to organize dental impression and temp resin cartridges. I don't use them nearly as much in the digital dentistry age, but you still do need them occasionally. It's designed to be…
Print Sunlu TPU silk
Wanted the arm to have a little more material to stiffen it. I have been using two pieces of 1/2" wide 3M VHB tape to attach the camera module and and cable to the mount. That seems to work well enough so far. Some of the tube will be cut…
eyecup for thermal monocular PVS-420 without side shield for better side switching Use original retainer ring and Print it as original eyecup Added new eyepiece resembling original NVG pvs-14 eyepiece,
What is needed for assembly: 1 x DIN 912 M4x30 1 x DIN 912 M3x30 2 x spacer DIN 988 5x10x0.5 1 x insert M4x8x6 (M4xH8) 1 x insert M3x6x5 soldering iron - to add threaded inserts to model clamp - insert the spacer into the spacer…
A j-arm adapter I made to work with the J-arm and helmet mount I have:…
This is a mount for a PVS-14 night vision monocular scope that I modelled for a good friend who was putting together a helmet mount system. It was asked recently if the file could be shared so others could benefit from it so here it is.…
3D-printable flip cap for a PVS-14 night vision monocular. This is a replacement cap with a rotating aperture disc for a Butler Creek 09A scope cap. The disc has three aperture sizes plus a closed position, allowing you to adjust depth of…
These are the Starship COPVs (Carbon Overwrap Pressure Vessels) in 1:100 scale to match my AXM Starship papermodels from my website. There are two files, one is the large COPV and the other is the smaller COPV. As per this post, these…
Print in TPU. The iris was purchased from Cold Harbour Supply and has a outer diameter of 45mm. You can use the cap without the lens protector but it will overhang a little bit. There is two versions of the model. There is a solid cap and…
For use with Butler Creek Size 07 "Flip-Open Scope Cover - Objective Lens" (Model 30070) Helps align a 1/4 drill bit to properly center the bit. I have only printed once and the hole is just slightly too small for my bit and required…
A chunky TPU intended print that has little ribs to grab onto your PVS14's objective lens, thereby securing itself and a 1.5" diameter acrylic circle (allowance is made for up to 3.6mm or 1/8") in place to protect your 250 dollar lens.…
This is the servo motor cover for the 4fl variant of the YPVS control unit. It houses three shafts (d=3mm) internally and the 8 mm output shaft going out of the front. The output shaft is sealed via a shaft seal located at the inside of…
This adaptor requires that you disassemble the PVS with the tools shown in pix; there are several youtube videos on this. Unscrew the front lens and replace with this adaptor. Threaded for 1.25" filters. I recommend nylon since its…
update from yashica gsn adapter that i made. designed for 58x0.75 camera lens thread no support needed for printing I used 6 walls 0.08mm height for main body and 0.16 for pvs 14 holder
Multiple size apertures for a size 09 Butler Creek lens cap to increase depth of field at the cost of less light. A lip allows for finger removal. Depending on your printer, slight scaling may be required. Sizes range from 1mm-7mm. If you…
Best in nylon for the threads, especially the internal threads for 2" filter
PRINT THIS OUT OF TPU! Wanted a way to add a PVS-14 protector to the ocular of an Armasight Sidekick 640. Used a Nocturne Onyx filter and now the image is even darker (and pinkish-purple), which I have liked while bridging with night…
Fix blade hub that takes DiveX blactip fixed blades and retrofits onto a old Mako style tail, e.g. Cuda classic, SS; https://dive-xtras.com/products/blacktip-x-prop-kit Originaly I milled these, however they could be printed from suitably…
My PVS-14 has an ancient housing with random, no name glass. Instead of trying to figure out what the hell the threads were, then trying to find a proper step down, I decided to just model the cap and put threads in it. The threads worked…
TPU cap for nightvision devices using a ~45mm iris, supports screw in lens protectors. Settings should not matter much, but I'd recommend printing with 100% infill for maximum protection. The print should require some pressure to install…
This is a simple fixed aperture cap for PVS-14-style objective lenses . It reduces the effective aperture of the objective, which can increase depth of field and make it easier to see objects at different distances without constantly…
bayonet mount needs 9.5mm wide 9mm tall 1mm thick steel plate/shim. need m3x10mm screw to hold plate in place. (better be safe than sorry) dovetail geometery from Mechanicus' Lights-Out JArm v2.0
NVGRA-14 Slip Cowling with added space for a PVS-14 Ocular Filter/Protector
Increased the model's inner diameter to 45mm to accomodate a larger adaption, but without affecting the original threaded section. Minor adjustments are possible if needed. I've included the blender file if you want to have a go at it…
PVS-14 to Yashica electro 35 gsn adapter. I have included f3d and step file so feel free to modify base to use for other camera types. remix are welcome for print settings I used 6 walls and 0.08 layer height for camera part and 0.16 for…
Designed up a bit of an arm guard for the Kronos as there is no motor protection. Snaps around the arm and has a single point to protect the front and back. Screwed in by the 2 motor holes. Bit of a bevel on the bottom of the arm so…
NEED ADDITIONAL FITTING TO PROPERLY USE It's a crude pvs 14 recorder using phone with magsafe case. So do not expect much from it. STEP file is included so use CAD program and make simple mock up of your phone. Align your 1x part of phone…
made it just for fun need some hardware hex head m4 bolt ~25mm and m4 nut preferably locking nut hex head m3x9 and 18mm bolt same 9.5x9x1mm plate from pvs 7 dovetail adapter support needed for dovetail body only entire j arm design from…
UPFRONT: I just created an Discord server for the PVS420 so its easier to talk about and share thoughts, ideas, improvements. All further updates to the design, functions and software will be available on my Discord!…
Parts list: Battery contacts: 100 stücke Batteries chrapnell aa oder aaa Batterie feder 5 Nr. Positive und negative Metall batterien Feder kontakt platte ersetzen - AliExpress 13 Power outlet connector: ( Male and female) 1 Stück 5,5 x…
Onshape CAD link for those interested in making changes in the design: https://cad.onshape.com/documents/143c740f42cb21cc45906fdf/w/4bc4bac1614f8c690bb5c467/e/82f31ec3f743aeb42d9d5409 Changes, 19/5/26 - added file for old housing…
PVS-31A Night Vision Specs Adjustable you can use the supplied printed rods to attach the lenses or use a long bolt and nut. Use HollowSpecs. For hollowed out lenses. (you can see through them)
Join the PVS420 Discord where you can find the ongoing development of the PVS GREMLIN Including firmware, updates and much more. https://discord.gg/Ce9BJ2DK3j The New N6 and P6 thermal cores available with a 9 and 13mm lens and 640…
A j-arm adapter I made to work with the J-arm and helmet mount I have:…
Best in nylon for the threads, especially the internal threads for 2" filter
TPU cap for nightvision devices using a ~45mm iris, supports screw in lens protectors. Settings should not matter much, but I'd recommend printing with 100% infill for maximum protection. The print should require some pressure to install…
