Wyniki wyszukiwania: radiation

Sortowanie

142 modeli

P
Printablesfoorschtbar

Radiation shields for DIY weather station

A universal radiation shield for various environmental sensors such as temperature, air pressure or humidity. It is recommended to print the radiation shield from PETG or another UV stable material. Print instructions Parts 2x Stainless…

Pobrania
697
Polubienia
112
Ocena
4,8
P
Printablesagmcmll

Helical rain/radiation shield for weather sensors with sensor mounting

This is a small weather shield I created for an outdoor temperature/RH/barometric pressure sensor. Prints without supports (upside down). The mounting is designed to fit a common breakout board style used for the BME 280 sensor, though…

Pobrania
217
Polubienia
22
Ocena
5
P
PrintablesYourigh

Radiation shield for Xiaomi Mijia thermometer meteostation / no supports

Radiation shield or sun shield for Mijia thermometer. I was using this thermometer for about 1,5years outside (-10°C to 45°C) under simple PLA 3d-printed roof and it worked well (despite that it should be indoor one.) The roof was…

Pobrania
179
Polubienia
34
Ocena
5
P
PrintablesLukáš Foukal

Mount and Radiation Shield for Netatmo and Generic 433MHz Weather Station

This is print is designed to mount a Netatmo Outdoor module and a generic 433MHz cheap temperature sensor on a pole. It also includes two “radiation shields” which protect the sensors from direct sunlight, but allow air to flow through…

Pobrania
172
Polubienia
30
Ocena
5
P
PrintablesblueMage

Ionizing Radiation Placard with Magnet Mount

Display ionizing radiation warning sign where needed. Use neodymium-iron-boron magnet 10 mm diameter by 3 mm tall glued into mount. It holds up the sign on a steel cabinet.

Pobrania
37
Polubienia
3
Ocena
5
P
PrintablesBatu

Solar Radiation Shield

Simple solar radiation shield (Stevenson screen) optimized for printing with minimal hardware requirement. Only downsize is the core size being only for small sensors and probably not capable of containing the logger.

Pobrania
399
Polubienia
39
Ocena
0
P
PrintablesThom-x

Weather Station with a Custom Radiation Shield - One piece

Elevate Your Weather Station with a Custom Radiation Shield Introduction: Upgrade your weather station setup with a specially crafted radiation shield, designed to optimize sensor performance and accuracy. This single-piece solution…

Pobrania
362
Polubienia
52
Ocena
4,6
P
PrintablesLevi Sitts

Radiation Shield

I designed this radiation shield to monitor the temp/humidity outside, together with a raspberry pi zero. Design is loosely based on this one , but I wanted to print the whole thing without metal hardware. You should only need zip ties to…

Pobrania
352
Polubienia
29
Ocena
4,8
P
PrintablesClough42

Solar Radiation Shield (Stevenson Screen) for Outdoor Thermometer

This is a solar radiation shield for mounting a temperature sensor outdoors. The shield allows air to flow through freely, but protects the thermometer from direct and reflected solar radiation. This provides a much more accurate…

Pobrania
351
Polubienia
46
Ocena
5
P
PrintablesEvgen Orlovsky

Radiation keychain

Simple radiation keychain

Pobrania
283
Polubienia
52
Ocena
5
P
PrintablesMakerMeik

Radiation shield "Stevenson screen" temperature sensor (weather station)

Stevenson screen for the temperature sensor of my weather station (BME280 and an additional Thermistor, but works of course also with DHT11/DHT22 or similar sensors). I printed it with white PLA and have no problems after about 12 months,…

Pobrania
276
Polubienia
38
Ocena
4
P
Printablesedison_cz

Weather radiation shield

This is a weather radiation shield for Pimoroni BME680 Breakout board. The Bosch BME680 gives you precise measurement of temperature, humidity, pressure, air quality index, bVOC and CO2 equivalent in the air and offers easy integration…

Pobrania
256
Polubienia
38
Ocena
0
P
PrintablesElectricDodo

Geiger Counter Enclosure (CAJOE RadiationD v1.1 with optional ESP8266)

An enclosure for the CAJOE RadiationD v1.1 geiger counter, with space for an ESP8266 for integration with home assistant through ESPHome. Works just fine without the ESP8266 as well. The lid has little notches to press-fit into place.…

Pobrania
225
Polubienia
21
Ocena
5
P
Printablessozo13

Radioactive . radiation logo

3 logos one with background other without raised so you should be able to easy to do a manual multicolor print 1 inverted Edit: originally uploaded some improperly scaled files ..i fixed that sorry for anyone who had issues

Pobrania
219
Polubienia
13
Ocena
5

Fallout Radiation King Television 1/4 Scale

I picked up playing the game again, and it has been a long while. While playing, I came across the Radiation King TV which is one of my favorite in game props. Just a lovely design. I've had this in my project book for a while so I dug…

Pobrania
218
Polubienia
78
Ocena
0
P
PrintablesZbyněk Král

Radiation Shield for TP-Link Tapo T310 Sensor [Remix] [Update]

I found an excellent radiation shield model from @ilMitch_97530 . Unfortunately, I don't use Aqara sensors. So I adapted the original holder for the temperature and humidity sensor TP-Link Tapo T310. It was easy because the author also…

Pobrania
202
Polubienia
23
Ocena
0
P
PrintablesBenny

Ecowitt WH57, WH32 holder - radiation shield

Holder WH57, WH32 for pipe diameter 60mm printed from ASA275 layer 0.2 without supports adhesive for bonding plastic, I used Loctite 406 screew 4x M3x10 innox 2x UV stable binding strip 280x4,5 mm print 1x part A, 7x part B(B+), 1x part…

Pobrania
200
Polubienia
24
Ocena
5
P
Printablesscientress

Solar Radiation Shield aka Stevenson Screen

This is a Solar Radiation Shield aka. Stevenson Screen for Air Temperature and Humidity Measurement. It's inspired by micromet's shield but I redesigned it from scratch. It should be compatible with sensor mounting adapters for their…

Pobrania
179
Polubienia
18
Ocena
5
P
PrintablesPrintess

Stackable radiation coaster (NO MMU needed)

I made these coasters in 2 parts that click together. There is a groove in the bottom of the coasters so they stack neatly on top of each other. The diameter of these coasters is 90mm. The height of the coasters is 4mm (this is including…

Pobrania
167
Polubienia
41
Ocena
4,67
P
PrintablesOK1HRA

Double radiation sun shield for thermometer DS18B20

3D printed shield, against overheating of the thermometer in direct sunlight. The doubling of the shield makes it possible to better shield the salve heat from the heated outer shield. Assembly manual

Pobrania
166
Polubienia
25
Ocena
5
P
PrintablesValentino Hesse

Small weather station - radiation shield

Small weather station - radiation shield for placing the WEMOD D1 mine module and any sensor in my case MPE280.

Pobrania
157
Polubienia
34
Ocena
3
P
PrintablesVger1981

Case for radiation detector

Here is my version of the well known box, modified to fit a Bosean FS-5000 radiation detector. Material used: M3x8 countersunk 8x. M3x35 hex, or 3mm rod 6x. EVA foam, thickness 2, 5, 10mm. Templates for cutting are included in files.…

Pobrania
156
Polubienia
45
Ocena
5
P
PrintablesAnna Lebedeva

Radiation Hazard Trinket / Keychain / Pendant

РУССКИЙ Внешняя часть напечатана черным пластиком PETG. Внутренняя часть напечатана флуоресцентным желто-зеленым пластиком PLA. Центральная часть светится под ультрафиолетом. Сборка: обработать края внутренней части чтобы не цеплялись во…

Pobrania
156
Polubienia
24
Ocena
4,5

Hardware-Free Radiation Shield for Environmental Monitoring

This is a hardware-free, fully 3D-printable radiation shield designed to protect environmental sensors (like the FS400-SHT31) from sun and rain. By shielding the sensor, it allows for more accurate ambient temperature and humidity…

Pobrania
151
Polubienia
9
Ocena
3,5
P
PrintablesGuyonacouch

Bic ligher case Radiation symbol

A lighter case designed to fit your standard size Bic lighter adorned with the radiation symbol.

Pobrania
149
Polubienia
28
Ocena
0
P
Printablesbilliaden

Glow-in-the-Dark Radiation Symbol Keychain Multi-part

Glow-in-the-Dark Radiation Symbol Keychain A two-part keychain featuring the international radiation hazard symbol . The design is simple, effective, and perfect for a quick print. Two-Color Design: The black outer disk and the colored…

Pobrania
133
Polubienia
47
Ocena
5
P
PrintablesFreman

Temperature and Humidity Solar Radiation Shield

Wanted to provide more accurate temperature and humidity readings for my home weather station by moving the Ecowitt WH32 sensor out of the patio (lots of concrete around) This is a modular press fit radiation shield that'll hold 2 WH32…

Pobrania
131
Polubienia
14
Ocena
0
P
PrintablesEricYUL

Radiation Shield for AcuRite, LaCrosse and other similar thermometer

This is a wall mounted solar radiation shield for a wireless thermometer. It will be compatible with devices that fit inside a tube of 50 mm in diameter. Print as many rings needed to fit the height of your device. Print without support…

Pobrania
131
Polubienia
18
Ocena
5
P
PrintablesKingsouth27

Fan Cover for Centauri Carbon with Radiation Symbol

Remix Fan Cover for Centauri Carbon with Radiation Symbol, to match I also made the Side panel protector found here : https://www.printables.com/model/1370009-9-designs-elegoo-centauri-carbon-side-panel-protec please post your makes i'd…

Pobrania
126
Polubienia
16
Ocena
0
P
Printablesar3Dprints

Radiation Sign and Keychain

http://www.prusa3d.com/#a_aid=3090

Pobrania
126
Polubienia
11
Ocena
5
P
PrintablesChyneuze

Thermo/Hygro/Baro Radiation Shield

Heat Radiation Shield for my ongoing weather Station. It using a BME280 probe ( https://fr.aliexpress.com/item/32930504331.html?spm=a2g0s.9042311.0.0.27426c37PCIFJB ) No supports is needed for printing. Printed with an Ender 3 Pro.…

Pobrania
121
Polubienia
6
Ocena
0
P
PrintablesTim Snels

Laser Radiation

Laser radiation hazard symbol

Pobrania
118
Polubienia
34
Ocena
4,67
P
PrintablesDusanH

Aqara Temperature sensor radiation shield / housing (double wall)

Housing and radiation shield for Aqara Temperature and humidity sensor (Zigbee) WSDCGQ11LM with double wall. The model was specifically designed for 0,4mm nozzle in mind, with very conservative overhangs, so no supports are needed. It was…

Pobrania
118
Polubienia
15
Ocena
0
P
PrintablesEddi Maevski

Radiation Shield for Temp / Humidity Sensors, "Stevenson screen" Helical fins design

Helical fins based radiation screen for temperature / humidity sensors. Parts have tight tolerances and interfaces, calibrated printer is required. 4 parts are needed: Main screen part. (No supports) Wall bracket. (Tree supports) Sensor…

Pobrania
113
Polubienia
7
Ocena
5
P
PrintablesValentino Hesse

Tuya WiFi Smart Temperature And Humidity Sensor - Weather station radiation shield

Tuya WiFi Smart Temperature And Humidity Sensor Now the model is stronger, more robust and better to print. Printing without supports was preserved. The mounting base is now stronger and allows for screwing to a kenzole or some other…

Pobrania
112
Polubienia
16
Ocena
5
P
Printables3Dpetr_kolos

Modular solar radiation shield

Radiation shield A radiation shield is a device that serves to protect and place meteorological sensors, most often temperature and humidity sensors. Its main task is to protect the sensors from environmental influences that could distort…

Pobrania
110
Polubienia
28
Ocena
5
P
Printablesdsw73

Radiation Shield for esp32 weather station

Radiation shield for weather station which can hold an esp32 or esp8266 with a DHT22 temperature sensor. All parts can be printed without support except for the door to close the tube holding the electronics.

Pobrania
109
Polubienia
14
Ocena
0
P

Radiation sign molle patch

A molle patch with a radiation symbol that you can stick on your geiger counter pouch.

Pobrania
107
Polubienia
32
Ocena
5
P
Printablesteacup_3o5

Warning sign: ionizing radiation (radioactive)

A sign that warns of ionizing radiation.

Pobrania
106
Polubienia
13
Ocena
5
P
PrintablesSimpleton

Drinks coaster nuclear logo Fallout coaster radiation

Drinks coaster to stop you from spilling all over your desk again...

Pobrania
101
Polubienia
20
Ocena
0
P
PrintablesAilbeC

Radiation Sign

radiation sign

Pobrania
100
Polubienia
6
Ocena
0
P
PrintablesTarrant1701

Radiation Extruder Motor Indicator

I just discovered the joy of extruder motor indicators, and decided to make one myself! You will need to glue a 8x3mm magnet onto the smooth, flat side of the print. v1 - more industrial, sharp lines v2 - chamfered for that refined look…

Pobrania
98
Polubienia
8
Ocena
5
P
PrintablesTiskoviny.EU

Radiation - Extruder motor rotation indicator

EN: Radiation - Extruder motor rotation indicator This model was created to improve the visibility of movement and possible jamming of the filament on a camera with night vision and low FPS. V1: For one magnet with super glue. V2: For two…

Pobrania
92
Polubienia
24
Ocena
5
P
PrintablesEhisforAdam

Therianizing Radiation Rod Prop

Prop of a rod of a therianizing radiation source modeled after the famous Cobalt 60 radiation source rods. There are a few furry fandom easter eggs included. Mine was printed in Silk PLA.

Pobrania
81
Polubienia
14
Ocena
5
P
PrintablesMihovecDesign

Radiation Coaster (Coaster for Drinks) - Radiation Hazard Bundle

Radioactive Coaster Bundle by Mihovec Design for science lovers and enthusiasts. Standout Features: 🌟 Customized Radiance: Choose any colour or experiment with dual-color filaments. 🔄 Seamless Assembly: Crafted without the need for…

Pobrania
81
Polubienia
11
Ocena
0
P
PrintablesHKOCH

Netatmo Outdoor Sensor Sun Radiation Shield

The model consists of several 3D-printed parts to print and assemble using the included instructions. You have to add screws and nuts by yourself. See the types in the PDF file (instructions)

Pobrania
80
Polubienia
8
Ocena
0
P
Printablesanimatedheaven

Nuclear radiation sign pendant

This is my nuclear radiation sign pendant - 3d printable model. Software used : Blender 4.2 This is a small single piece model, not separate parts. Units= cm Width = 2 cm Height = 2.28 cm Depth = 0.15 cm Available formats = STL Thanks :)…

Pobrania
76
Polubienia
11
Ocena
0
P
PrintablesJiri Dobry

Aqara Temperature Humidity Sensor Zigbee 2x LR4(AA) battery holder and radiation shield

A am using few Aqara Temperature Humidity Sensor sensors. But I was not satisfied with original CR2032 button as power source, therefore I made holder for 2x LR4(AA) combined with sun radiation shield. Aqara Temperature Humidity Sensor…

Pobrania
76
Polubienia
19
Ocena
3
P
PrintablesT3D.tisk
Pobrania
75
Polubienia
4
Ocena
0
P
PrintablesNick Tailor

Radiation enamel pin

ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.

Pobrania
73
Polubienia
9
Ocena
0
P
PrintablesChris

Radiation symbol keyring charm

The lines are multiples of .4 mm and will look best with a nozzle of that size. The symbol and outline are separate bodies that can be coloured in if you're using something like the AMS. Alternatively you can easily change colour by…

Pobrania
72
Polubienia
12
Ocena
0
P
Printablesm123

Radiation shield for Xiaomi Mijia LYWSD03MMC sensor

Minimum-size radiation shield for the Xiaomi LYWSD03MMC temperature and humidity sensor. Two parts snap together.

Pobrania
72
Polubienia
9
Ocena
0
P
PrintablesCM_3D_PRINT

RADIATION LED LAMP LIGHTBOX

🌟 Illuminate Your Space with the "RADIATION" Lightbox! 💡 Customize your lighting experience by incorporating LEDs for a warm and inviting glow, or simply appreciate it as a standalone decorative piece. The "RADIATION" Lightbox offers more…

Pobrania
71
Polubienia
17
Ocena
0
P
Printablesc0nsumer

Solar Radiation Shield for Outdoor Temperature Sensors (Variable Height w/ Chain Link Fence Mount)

About This is a customizable / generic solar radiation shield for temperature sensors. By printing one roof and however many 15mm tall main body pieces are needed you can hold whatever height sensor you need. Instead of being specific to…

Pobrania
69
Polubienia
24
Ocena
0
P
PrintablesPeter Farell

Bonk Radiation Power Drink : Blutonium : Can Koozie : Team Fortress

Bonk Radiation Power Drink : Blutonium : Can Koozie : Team Fortress

Pobrania
62
Polubienia
19
Ocena
0
P
PrintablesVladimír Waas
Pobrania
59
Polubienia
16
Ocena
0

Forget Lab Safety, I want Super Powers - Radiation

I made this because I am a scientist and secrretly I want superpowers - These coasters are engineered to be different to the average bit of plastic you see on makerworld. Features: holes in the top surface to stop the coaster sticking to…

Pobrania
59
Polubienia
21
Ocena
0
P
Printablesmbrazdil
Pobrania
59
Polubienia
3
Ocena
0
P
PrintablesShadow Panther

Ant feeder dish - radiation symbol

Just a small dish to place the food for ants in. Has three sections for different foods and a handle that you can pick up with a pair of tweezers. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Infill:…

Pobrania
57
Polubienia
10
Ocena
4
P
Printablesrocks247365

Protective Cover for Ludlum Pancake Probe Radiation Detector 44-9

I believe Ludlums.com may sell a replacement, but it's faster to print my own =) This design has a tapered cone shape so that it grips the probe, but also comes off easily. I printed in PETG with 20% infill, 0.2mm layer height. The…

Pobrania
55
Polubienia
2
Ocena
0

radiation/radiotherapy mask/fixator

this is a rough approximation of the appearance of a head fixator as would be used in a hospital during radiotherapy procedures. Normally these are custom made by radiologists by forming a thermoformable plastic sheet over the patients…

Pobrania
53
Polubienia
4
Ocena
0
P
PrintablesRPK

Mount and radiation shield

Sun protection for weather stations / sensors Sonnenschutz für Wetterstationen / Sensoren

Pobrania
53
Polubienia
6
Ocena
0
P
PrintablesHigany

Half Helical rain/radiation shield for weather sensors

Remix of agmcmll 's sunshade for direct wall mounting. I integrated the sensor mount, it has one screw hole to accept compact sensors like the SHT30. Print Settings Rafts: No Supports: No Resolution: Variable Infill: 15 Filament: EkoMB…

Pobrania
52
Polubienia
4
Ocena
5
P
Printablesghostprint84

star trek IV RADIATION PARTICLE COLLECTOR

star trek IV RADIATION PARTICLE COLLECTOR

Pobrania
52
Polubienia
22
Ocena
0
P
Printablesv3li

Radiation shields for 3d solarnode

Radiation shields for 3d solarnode https://www.printables.com/cs/model/922784-3d-solarnode-meshtastic

Pobrania
51
Polubienia
17
Ocena
5
P
PrintablesArewix
Pobrania
50
Polubienia
4
Ocena
5
P
PrintablesPajenicko

Radiation shield for expLORA CLIMA OUTDOOR

This printable enclosure is tailor-made for a wireless expLORA CLIMA sensor with a 868 MHz LoRa radio (powered by two AA batteries). It provides a rugged, well-ventilated housing for long-term temperature, relative-humidity and…

Pobrania
49
Polubienia
8
Ocena
0
P
PrintablesToolsToMars

3D and Laser Radiation Sign

I ordered a fibre laser for my 3D shop recently and i needed a way to warn people on their way in to put on their glasses. My company is called "Tools to Mars" so that's what that is about.

Pobrania
48
Polubienia
13
Ocena
5
P
PrintablesMeister Edel
18+

Źródło oznaczyło ten model jako treść 18+.

Pobrania
48
Polubienia
22
Ocena
5
P
Printablesdevicemodder

radiation symbol Ear stretcher single flare

This is a 21mm ear stretching plug, single flare with a radiation logo

Pobrania
47
Polubienia
2
Ocena
0
P
Printablesmnux

tiny radiation shield

A really small radiation shield I made for my wx station. https://mnux.xyz/p/wx-station/ screw size: M3 parts should be printed “upside down” like this:

Pobrania
46
Polubienia
5
Ocena
5
P
PrintablesAlaskan Astro

DHT22 Sensor Radiation Shield for Weather Station

a small box with pin inside that effectively shields and holds a DHT22 temperature humidity sensor. Allows airflow in but not water. I had this set up as an outside air temp and hum sensor for my all sky camera. Printed with the solid…

Pobrania
45
Polubienia
6
Ocena
0
P
Printables0kam

HOBO U23-001 Pro v2 Solar Radiation Shield

Overall Solar Radiation Shield for Onset's HOBO U23 Pro v2 Temperature/Relative Humidity Data Logger. You can install any small devices in it. e.g., SwitchBot Indoor/Outdoor Thermo-Hygrometer (…

Pobrania
45
Polubienia
1
Ocena
0
P
PrintablesPavel

vykrajovátko na zářící linecké cukroví (doplněná verze) - radiation cookie cutter (revised version)

zářící vánoce si přejí všichni. tak proč nezkusit toto.. bál jsem se aby se těsto nepřipalovalo v tenkých partiích, proto je znak tak malý ** doplněno - njn, ty dírky jsou moc malé, tak ještě revidovaná verze s větším symbolem Everyone…

Pobrania
43
Polubienia
2
Ocena
0
P
Printablestato_713

Cosmic Microwave Backround Radiation scaled one in 2*10^28

Originally published here: Cosmic Microwave Background Radiation scaled one in 2*10^28 by tato_713 - Thingiverse This model was made using the data of the Plank spacecraft of the Cosmic Microwave Background (CMB or CMBR), processed with…

Pobrania
43
Polubienia
8
Ocena
0
P
PrintablesSimoste1969

Solar radiation shield for weather stations with active ventilation

03/12/2025 : Added V2 of Vertical mount and Sensor mount printable file I'm currently working on a SPS30 mount to attach at the bottom of the sensor mount, also waterproof and WMO compatible This is a solar radiation shield designed to be…

Pobrania
40
Polubienia
6
Ocena
0
P
PrintablesPrinterMan

Radiation Warning Symbol

A Radiation Warning Symbol Swap your fillament partway through for a multicolor print If you enjoy this model be sure to drop a like and post your make Happy Printing Everybody

Pobrania
37
Polubienia
8
Ocena
0

Radiation Nema 17 Indicator

I made my own little indicator for the extruder. The yellow indicator has a diameter of 30mm and is mounted on the shaft of the Nema 17 motor. It looks good on my OMG extruder in black. Print Settings Printer Brand: Flsun Printer: Flsun…

Pobrania
37
Polubienia
3
Ocena
0
P
PrintablesJan Stanka

Ecowitt sensor radiation shield

[EN]: Radiation shield with 6cm inner diameter and 12 cm outer diameter. Harware-less assembly. Print from ASA/ABS upside down, then glue bowls together. Bowls and Cap without supports. The mount with tree supports. [CZ]: Radiační štít…

Pobrania
36
Polubienia
3
Ocena
0
P
Printablesbart

UV/vis/fluorimeter cuvette holder with 4 LED slots for irradiation

This was migrated from my Thingiverse profile and is from 2015. A contraption which fits around a standard 1x1 cm (internal) pathlength UV/vis or fluorimeter cuvette. Four LEDs fit around the sides allowing the sample to be irradiated…

Pobrania
35
Polubienia
1
Ocena
0
P
Printablesagmcmll

Old Version- Helical rain/radiation shield for weather sensors

Update: An improved design can be found here: https://www.prusaprinters.org/prints/33136-helical-rainradiation-shield-for-weather-sensors-w This model is also on Thingiverse, and has continued to get downloaded almost as frequently as the…

Pobrania
35
Polubienia
3
Ocena
0
P
PrintablesProxFPV

Tuya Zigbee Outdoor Temperature Sensor Radiation Shield and Mount

Use an M5×10 screw to mount the holder onto the L-profile, and M2×12 screws to connect the radiation shield to the holder. Print with white PETG filament.

Pobrania
34
Polubienia
11
Ocena
0
P
PrintablesRoman S.

BME280 mount for Radiation Shield

BMP085 mount for "Radiation Shield For Weather Station Temperature/Humidity" by micromet. For the rest of the radiation shield follow this link: https://www.thingiverse.com/thing:1067700 Print Settings Rafts: No Supports: No Resolution:…

Pobrania
34
Polubienia
2
Ocena
0
P
PrintablesDestiny19459

Weather Station Radiation shield / Station meteo

English version Here is a shelter for different types of sensors, such as temperature, humidity, or gas sensors. It is very easy to print and install, either on a pole or on a wall. Its height can be adjusted as needed by printing as many…

Pobrania
32
Polubienia
6
Ocena
0
P
PrintablesDavid Fiala

WH1080 - temperature radiation shield mount with fan

Radiation shield mount with fan for cheap weather station kit: https://www.hadex.cz/t110-vnejsi-mechanicke-dily-k-meteo Separated to parts, no supports needed. Print from UV resistant filament - ASA or PETG for example Parts needed: 4020…

Pobrania
31
Polubienia
4
Ocena
0
P
PrintablesNo1070

Radiation Hazard Warning Sign

Radiation Hazard Warning Sign A clean two-color radiation hazard warning sign designed for FDM 3D printing. Features Easy to print No supports required Two-color design using filament change or multi-material printing Suitable for PLA or…

Pobrania
30
Polubienia
2
Ocena
0
P
PrintablesMr. Stunna

Radiation-Stand

Stand for the "Drop & Run Cobalt 60 Source Cylinder". I have created a stand here for the STL. file from "Slyka" in order to be able to line up the cylinders neatly. If the STL.-file of "Slyka" is printed in 100% size, the 13 cylinders…

Pobrania
30
Polubienia
5
Ocena
0
P
PrintablesFCUK

Fnirsi GC-03 radiation detector storage box

Fits tight, Print in place, Uses 3x5mm magnets. https://www.fnirsi.com/products/gc-03

Pobrania
29
Polubienia
5
Ocena
5

DIY Weather Station Radiation Shield

This enclosure is designed for mounting environmental/weather sensors (e.g., Temperature, Humidity, and Air Pressure sensors) and accommodates a 3 x 7cm PCB for an auxiliary electronic module. The sensor mounting features are specifically…

Pobrania
28
Polubienia
5
Ocena
0
P
PrintablesKlave

Therapeutic Ultrasound Power Meter (Radiation Force Balance)

I bought a therapeutic ultrasound machine from eBay and wanted to know if it really produces the claimed power output (it does). It's supposed to provide up to 3.4 W/cm^2. The transducer is claimed to be 1 inch diameter although the face…

Pobrania
28
Polubienia
3
Ocena
0
P
PrintablesBecker Thorne

Radiation Signage

Shop signage Category: Signs & Logos

Pobrania
26
Polubienia
4
Ocena
0
P
PrintablesArewix

radiation sign

token of international radiation sign

Pobrania
26
Polubienia
3
Ocena
0

Weather Station Radiation Shield for Temperature Sensor

Housing for temperature sensor. Works with BIUWING brand and possibly others.

Pobrania
25
Polubienia
6
Ocena
0
P
Printablesdavidhirka

Thermo/Hygro/Baro Radiation Shield Support Remix

I need to use that great shield for BME280 but for mounting on the wall.

Pobrania
24
Polubienia
2
Ocena
0
P
PrintablesHS_Martin

Radiation_warning_symbol buttons

Button that I created in tinkercad for the button contest.

Pobrania
23
Polubienia
9
Ocena
0
P
Printablespastrami4033

Aqara Zigbee Temperature Humidity sensor radiation shield + AA battery holder

Disclaimer This does not work well at protecting from solar radiation. The temperature on this day did not exceed 72 °F, but the sunlight hitting the wall behind it created a top temperature of 89 °F. I would only suggest using this in a…

Pobrania
23
Polubienia
11
Ocena
0

Stevenson Radiation Shield for IKEA TIMMERFLOTTE

Stevenson-screen style solar radiation shield for the IKEA TIMMERFLOTTE outdoor thermometer sensor (64mm x 18mm). Printable as one piece, no assembly needed. Features: - 5 angled louver plates (45 deg slope) for airflow + sun shading - 12…

Pobrania
23
Polubienia
5
Ocena
5

radiation cake topper

radiation cake topper

Pobrania
23
Polubienia
5
Ocena
0
P
PrintablesPiotrRago

Radiation Ring for Cisco Gold Ring

Radiation Ring for Cisco Gold Ring Take the main ring from Cisco :) Rescaling chart of his ring and also the plate: size 3- 87 % size 3,5 - 90% size 4 -92% size 4,5 -95% size 5 -97% size 5,5 - 100% size 6 - 103% size 6,5 - 105,6% size 7 -…

Pobrania
22
Polubienia
3
Ocena
0
P

Beware of radiation RUS (Осторожно радиация)

Printing Tips: Prints without support! Need 2 colours The inside part is loosely attached to the wall. You may need glue.

Pobrania
20
Polubienia
2
Ocena
0