Wyniki wyszukiwania: raspb

Sortowanie

7203 modeli

P
PrintablesSneaks

Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2

IMPORTANT NOTE: 3D-printed plastic screws will break. Because of the way a 3d printer works, and the way the screws are typically oriented during printing, they are very weak. Things like printing in PETG, adding more perimeters, and…

Pobrania
27 813
Polubienia
6270
Ocena
4,9
P
PrintablesSneaks

Modular Snap Together Raspberry Pi 2B/3B/3B+/4 Case w/ OLED & Fan Options

Compatibility: This case design is compatible with Raspberry Pi's 2B/3B/3B+/4. It may be compatible with other models, however, these were the ones I was personally able to test it on. Two Top Depths: (01/06/2022) The top half is now…

Pobrania
22 705
Polubienia
5392
Ocena
4,92
P
PrintablesPrusa Research

Raspberry Pi Zero frame for Einsy Rambo

For Raspberry Pi Zero W so you can use Octoprint with your MK3/MK3S/MK3S+ printer. https://help.prusa3d.com/en/article/raspberry-pi-zero-w-preparation-and-installation_2180 If you prefer a step-by-step guide, it is available here:…

Pobrania
14 276
Polubienia
609
Ocena
4,89
P
PrintablesRonnyS

7" Touchscreen case for Raspberry Pi 4 + internal fan

Case for Raspberry Pi 7" Touchscreen and Raspberry Pi 4 *** New case for Raspberry Pi Touch Display 2 *** Updates Alternative top case part with additional slot for camera ribbon cable, see subfolder "case top v2". Features Internal fan…

Pobrania
3810
Polubienia
483
Ocena
4,92
P
PrintablesINUX3D

The TerraPi X , Prusa Edition - Single SSD Case for Raspberry Pi (all models)

This special Prusa Edition of the TerraPi SSD Case for the Raspberry Pi is to celebrate the 2 year anniversary of the release of the original TerraPi SSD case. The model prints without supports in under 2.5 hours. Best used materials are…

Pobrania
3681
Polubienia
874
Ocena
4,81

Raspberry Pi 3 Sleeve case

2 part sleeve case for the Raspberry Pi 3, their spilt in the middle of the headphone jack. The 2 parts of the case slides over Raspberry Pi, and held together by friction between the 2 part of the case and the Raspberry Pi. So no need of…

Pobrania
3458
Polubienia
243
Ocena
4,84
P
PrintablesKalleKnall

Prusa MK3/S Einsy Raspberry PI 4B/3B Enclosure with support Brace

I've designed my own very strong PSU-Replacement-Brace (see my Prints) and desided to have the same one on the other side. Here's my new "from the scratch" Design for an EINSY Enclosure with Raspberry PI 4B (2B/3B) and Voltageregulator…

Pobrania
3396
Polubienia
712
Ocena
4,8
P
PrintablesYstrouzas

Prusa i3 Octoprint Raspberry Pi case

This is a modification to the Original Prusa I3 MK3/MK3S Einsy case that implements appropriate housing for a Raspberry Pi 1B+/2B/3B/3B+/(4B - Now available as the first download ). This part allows for one of the aforementioned Raspberry…

Pobrania
2397
Polubienia
515
Ocena
4,38
P
Printablesthe freewheeler

Raspberry Pi Z-Box | Integrated 4B Case for Prusa MINI

RPi 'Z-BOX' The RPi Z-Box, designed for the 4B, is the first integrated case for the Raspberry Pi that attaches seamlessly to your Prusa MINI/MINI+. The Z-Box attaches at the base of the z-axis and replaces the lid of the stock…

Pobrania
1550
Polubienia
411
Ocena
4,71
P
PrintablesShay

Raspberry Pi Zero 2 W frame for Einsy Rambo

A remix of Libang's Raspberry Pi Zero 2 W frame. https://www.prusaprinters.org/prints/85119-raspberry-pi-zero-2-w-frame-for-einsy-rambo Which is in turn a remix of the original Prusa Raspberry Pi Zero W frame.…

Pobrania
1422
Polubienia
138
Ocena
4,94
P

Raspberry Pi 5 Case (customisable)

This is a press-fit Pi 5 case, with customisable options for vents and ports, that also supports the optional active cooler. V1.1 has more tolerant clearances, less crush ribs and a slight taper to the longer pins. V1.2 has no specific…

Pobrania
1394
Polubienia
69
Ocena
5
P
Printablesthe freewheeler

Raspberry Pi Z-Box | Integrated 3B/3B+ Case for Prusa MINI

RPi 'Z-BOX' The RPi Z-Box, designed for the 3B & 3B+, is the first integrated case for the Raspberry Pi that attaches seamlessly to your Prusa MINI/MINI+. The Z-Box attaches at the base of the z-axis and replaces the lid of the stock…

Pobrania
1348
Polubienia
261
Ocena
4,9
P
PrintablesTinkrMakr

Prusa Mini (Mini+) Raspberry Pi Camera Module V2.1 8MP Mount With X Axis Strain Relief

Prusa Mini and Mini + Raspberry Pi Camera Module V2.1 8MP Mount With X Axis Strain Relief. The mounts I could find did not give me the angle that I wanted. I like to have a clear view of the nozzle. Added x axis strain relief to…

Pobrania
1179
Polubienia
287
Ocena
4,97
P
PrintablesSeabird HH

Prusa MK3S Raspberry Pi Camera Mount - by Clip-Fastening

The mounting of this bracket is achieved by clip-fastening! The development of this camera mount was inspired by various mounts that can be found on Thingiverse. As it is, none of them was exactly what I had in mind. That's why I decided…

Pobrania
1103
Polubienia
162
Ocena
4,97
P
PrintablesJeepingJohnny

Case and Stand for Raspberry Pi 7 inch Touch Screen..Mini Monitor!

My friend bought a Raspberry Pi 7 inch Capacitive Touch Screen HDMI Monitor. He wanted a case and stand for it. I found a case for a similar monitor and remixed/remodeled it to fit. I made a lot of improvements to the case for printing…

Pobrania
1060
Polubienia
173
Ocena
5
P
PrintablesWilko

Raspberry Pi 3B Sleeve

This is a slim and configurable case for a Raspberry Pi 3B. It's not a case for systems that runs a heavy load for a long time, but my 3 Pis (pi-hole, openHAB, octoPring) do run with a temperature between 45°C and 55°C measured during…

Pobrania
1055
Polubienia
79
Ocena
4,94
P
Printablesrockethorse

Hyperpixel 4" Touchscreen + LCD + Raspberry Pi4 for Octoprint and OctoDash Prusa for MK3s+

LCD panel that works with the awesome Hyperpixel 4" touchscreen with Raspberry Pi4. This is for: MK3/MK3S/MK3S+ and Pi4 Yet another remix of the 4” HyperPixel cover for the Prusa MK3S+ for the Pi4 to be used with Octoprint and Octodash.…

Pobrania
1054
Polubienia
372
Ocena
5
P
Printablesthe printed cow

Retro Raspberry Pi 5 Case (snap fit)

A retro case that's simple and functional. Designed for use with pi's active cooler. I was aiming for a retro, Art Deco vibe, and also tried to capture the classic look of an RTX or Radeon reference GPU. Print Instructions: Settings: ~38g…

Pobrania
1001
Polubienia
128
Ocena
4,89
P
PrintablesRonnyS

7" Touchscreen case for Raspberry Pi 3 (B/B+) + internal fan

*** New case for Raspberry Pi Touch Display 2 *** Required models from 7" Touchscreen case for Raspberry Pi 4 + internal fan Display case >> rpi4-display-case Stands >> rpi4-stand Fan mount >> rpi4-fanmount Print instructions See 7"…

Pobrania
721
Polubienia
94
Ocena
5
P
Printablesjeraff24

Slim Case for Raspberry Pi 5 with Active Cooler

Parts required: 4x m2.5x12mm screws 4x m2.5 nuts While slicing, I used supports for the SD card slot and the screw holes but it's possible they may not all need supports. After printing, poke holes through the thin top layer that is…

Pobrania
712
Polubienia
105
Ocena
4,88
P
Printablesnilok

Raspberry Pi Breadboard Case

The larger holds a Raspberry Pi 2/3/4 and a half-width breadboard. The smaller is made for a Raspberry Pi Zero. Nothing too complicated - just handy prototyping cases in solid and slotted bottoms. Both accept 4x M2.5x4 (or M2.5x5)…

Pobrania
700
Polubienia
115
Ocena
4,88
P
PrintablesSpeakingOfBrad

Raspberry Pi Zero/Zero2 frame for Einsy Rambo

This is a remix of the Raspberry Pi Zero frame for Einsy Rambo by Prusa Research . The original only fits the Raspberry Pi Zero, but this frame fits Raspberry Pi Zero W as well as Raspberry Pi Zero 2 W. (The Zero 2 has components in…

Pobrania
676
Polubienia
79
Ocena
5
P
PrintablesLV3D

Raspberry Pi Zero 2 W frame for Einsy Rambo V2

Remix of original frame for new Zero 2 W. New Zero 2 W have slightly different placed components. Updated model to V2. No need to use remix.

Pobrania
663
Polubienia
51
Ocena
5
P
PrintablesGeorgeRaven

RavenPi; Raspberry pi 4 case

A slim, functional, openSCAD raspberry pi 4 case. I would recommend also printing a fan cover for any attached fans or just for style as there is a hole by default for the fan. This can of course be disabled by commenting out its…

Pobrania
629
Polubienia
29
Ocena
4
P
PrintablesJascha3D

Raspberry Pi 5 Case - Modular Snap Together

Rasperry Pi 5 Case - Modular Snap Together This is a remix of the excellent "Modular Snap Together Raspberry Pi Case" by Sneaks , originally designed for the Raspberry Pi 3B+ and Raspberry Pi 4 . I've updated the design to make it fully…

Pobrania
615
Polubienia
59
Ocena
5
P
PrintablesAdafruit

OctoPrint Raspberry Pi Rig 3.5" PiTFT Touch Display

UPDATE Added a slot in the top half for Raspberry Pi Camera module https://youtu.be/lVM0vg\_LYkY Learning Guide: https://learn.adafruit.com/3-dot-5-pitft-octoprint-rig/overview OctoPrint & Raspberry Pi This project adds a touch screen…

Pobrania
614
Polubienia
156
Ocena
5
P
PrintablesiZboxo

Raspberry Pi 5 Case

------------------------------------ 27/12/2023 Update: Everything fits well! ------------------------------------ This case is designed to be printed easily. You can use MMU, but you don't have to. Just download files that fits your…

Pobrania
588
Polubienia
41
Ocena
5
P
PrintablesGraloth

Raspberry Pi Zero 2 W frame for Einsy Rambo

This is a complete remodel to ensure it adequately supports the Raspberry Pi Zero 2 W, as the original model interferes with some resistors/diodes on the pi. This remodel also add a bit more clearance for the headers as I found that some…

Pobrania
579
Polubienia
49
Ocena
5
P
Printablesgenau14zeichen

Minimalistic Wall mount for Raspberry Pi 3b / 4 Armor Case

Simple wall mount for the RPi4 armor case. Uses very little filament and prints quickly. I used PETG but PLA should also work. Has a nice fit and you can easily slide your Pi in and out after installing it to your wall. I printed the…

Pobrania
578
Polubienia
60
Ocena
5
P
PrintablesSteevieB

Raspberry Pi Zero (W) case & wall mount

This housing is designed for Raspberry Pi Zero (W). No glue or screws necessary. The lid snaps into the case. The case can easily be slid into or removed from the wall mount for easy access. HDMI / USB ports, camera connector as well as…

Pobrania
543
Polubienia
44
Ocena
5
P
Printableszethos

Stackable Shelf for Raspberry Pi Argon One V2 or Other uses

I needed a way to stack my Argon One V2 cases for Raspberry Pi 4s. I didn't really find anything that fitted my needs so decided to design one. This is my model that I've designed and made available. You can print as many of the…

Pobrania
513
Polubienia
73
Ocena
5
P
PrintablesRonnyS

7" Touchscreen case for Raspberry Pi 5 incl. slim version

Case for Raspberry Pi 7" Touchscreen and Raspberry Pi 5 *** New case for Raspberry Pi Touch Display 2 *** NEW: Alternative slim version for the new Raspberry Pi Active Cooler Required models from 7" Touchscreen case for Raspberry Pi 4 +…

Pobrania
506
Polubienia
27
Ocena
0
P
Printablesabeaulieu

M5 press-fit thumb screw and captive nut for Sneaks' Articulating Raspberry Pi Camera Mount

3D printed threads are unreliable, so I decided it's better to rely on an actual M5 screw and nut for the otherwise amazing camera mount designed by Sneaks. Some comments Thumb screw Since there are a few variations for the M5 socket head…

Pobrania
496
Polubienia
106
Ocena
4,8
P

Real Bolts (For Articulating Raspberry Pi Camera Mount)

First up, the articulating camera mount is a great piece of design, the sheet number of remixes and additions that have been released shows how popular the design is. However, I have found that the printed threads on the nut and bolt for…

Pobrania
487
Polubienia
112
Ocena
4,59
P
PrintablesRonnyS

Raspberry Pi 4 case, VESA mount, internal fan

Case for a Raspberry Pi 4 Features VESA mount (75mm x 75mm) Internal fan mount (40mm x 40mm x10) - optional Thread inserts (case and pi mounts) Footer pins - optional Required parts Raspberry Pi 4 Optional parts Fan 40x40x10, 5V → Noctua…

Pobrania
480
Polubienia
40
Ocena
5
P
PrintablesMauro

Octoprint - Raspberry Pi3 case with internal Noctua fan

update 02.06.2020 I corrected files in the download section. Now they are correctly a cover and a bottom, and not just two covers. Thanks to David Ewen for letting me know ! __________________________________________ This is an…

Pobrania
475
Polubienia
69
Ocena
4,5
P
PrintablesRonnyS

Raspberry Pi 3 (B/B+) case, VESA mount, internal fan

Case for a Raspberry Pi 3 (B/B+) Features VESA mount (75mm x 75mm) Internal fan mount (40mm x 40mm x10) Thread inserts (case and pi mounts) Footer pins optional Required parts Raspberry Pi 3 (B/B+) Fan 40x40x10, 5V → Noctua NF-A4x10 5V…

Pobrania
453
Polubienia
63
Ocena
5
P
PrintablesMuldjord

Raspberry Pi 5 NVMe case (with Pimoroni NVMe Base board)

This case was designed to house a Raspberry Pi 5, the Pimoroni NVMe Base and an optional official RPi Active Cooler. It is a 3-part print: The bottom of the case The lid of the case The power button Holes have been added in several places…

Pobrania
448
Polubienia
37
Ocena
0
P
PrintablesMartinRowan

Raspberry Pi 4 Project Enclosure

I've designed this for a 3D Printing enclosure controller I'm building using a Raspberry Pi 4. Design Features 1.6mm thick walls for sturdy construction 4 x 11mm knockouts for panel mount DC barrel jacks 4 x 6mm knockouts for panel mount…

Pobrania
416
Polubienia
34
Ocena
4
P
PrintablesColgS3b

Raspberry Pi 4 fan case (supports RTC)

I noticed that many of the current Raspberry Pi 4 fan cases placed the fan directly over the CPU. While that is nice in theory, it prevented having an RTC. This design tries to keep a low(ish) profile while allowing for a heatsink and…

Pobrania
416
Polubienia
63
Ocena
4,8
P
PrintablesPea Prog

Raspberry Pi Zero simplistic case with logo [Remix]

This sleek and stylish case is the ideal way to jazz-up your Raspberry Pi Zero! It is aesthetically pleasing, as a number of color combinations can be used, as well as displaying the Raspberry Pi logo proudly. It also doubles as cooling…

Pobrania
415
Polubienia
29
Ocena
5
P
PrintablesMartinRowan

3U Modular Rack for ZimaBoard, Raspberry Pi, SSD, HDD, PCI cards and more

Please note this design should be considered a BETA , I'm still making some tweaks for the following: Improve all hangers to make latching less stiff Improvements to PCIe hanger. Modular 3U Rackmount for ZimaBoards , to be co-located with…

Pobrania
408
Polubienia
98
Ocena
4
P
Printablesbr4in

Raspberry Pi HQ Camera Mount for the Articulating Camera Mount

This is an adaptation of the camera back from the Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2 , inspired by and simplified from the Raspberry Pi Hi Quality Camera Case Adapter . I've adjusted the back plate of the…

Pobrania
400
Polubienia
53
Ocena
5
P
PrintablesBitScout

Raspberry Pi IR Camera "GoPro Style" Mount

I made this because those IR lights really heat up and I don't want them to melt anything or even set a camera housing on fire, which is easiest when there is none.

Pobrania
383
Polubienia
45
Ocena
5
P
PrintablesFrank

SRC3D-1: A Raspberry Pi 7" touchscreen rollbar frame.

The shown rollbar frame was sliced using the standard 0.15mm settings from Prusa Slicer and printed using Prusament PETG. The left and right side were printed separately without any support. If you are advanturous, you could try the…

Pobrania
340
Polubienia
51
Ocena
4,8
P
PrintablesFalco

Raspberry Pi4

Prusament Galaxy Black. PETG 0.20. 15% Infill: (Gyroid). Nozzle 250c. Bed 90c. Support : None.

Pobrania
288
Polubienia
41
Ocena
4,83
P
PrintablesSorp2005

Raspberry Pi 3B+ CAM Rover with arm

This is a remix of the Rover . I made the model so it can fit a raspberry pi 3b+, a raspicam model 3, a servo HAT and a dc Motordriver. This Model Provides all files needed. There are two python files, which need to be loaded to the…

Pobrania
277
Polubienia
67
Ocena
0
P
PrintablesPrusa Research

RaspberryPi Zero and Zero 2 frame for MK3

See: https://github.com/prusa3d/Original-Prusa-i3/pull/172

Pobrania
256
Polubienia
50
Ocena
5
P
PrintablesBetschler

Housing for the Raspberry Pi standard camera module v2.1 with integrated focus adjustment

The goal was to enable an easy change of focus while using the exisiting mount system created by Sneaks

Pobrania
249
Polubienia
44
Ocena
5
P
Printablespressi

Raspberry Pi 5 Case

Last update: 7.4.2024

Pobrania
242
Polubienia
14
Ocena
0
P
PrintablesChris Crewdson

Raspberry Pi deep 7 Inch Touchscreen display case

Re-modelled and extended to cover the battery hat I use.

Pobrania
231
Polubienia
19
Ocena
0
P
PrintablesCesare

Inky pHAT case (with RaspberryPi Zero)

Just a little case for the Pimoroni Inky pHAT (with RaspberryPi Zero). The case can be clicked together without any screws. The camera port, the SD Card and the two USB Ports are accessible, however, the HDMI Port is inaccessible. Print…

Pobrania
210
Polubienia
25
Ocena
5
P
PrintablesApproxit

Arducam IMX219 Auto Focus Camera Module cover for Articulating Raspberry Pi Camera Mount

After I replaced my stock camera module with Arducam IMX219 Auto Focus Camera Module , I found out that it can't fit in cover provided in Articulating Raspberry Pi Camera Mount. So I took its step file and aligned camera module hole by…

Pobrania
199
Polubienia
20
Ocena
5
P
Printablesabeaulieu

3030 Extrusion Adapters for Sneaks' Articulating Raspberry Pi Camera Mount

These parts enable mounting the Articulating Raspberry Pi Camera Mount on the base extrusions of the i3 MK3. Just print with default settings without any supports. I like to use a 0.15mm or lower layer height for better definition of the…

Pobrania
196
Polubienia
28
Ocena
4,5
P
Printablescbearman

Console for Elecrow 5" HDMI Touchscreen and Raspberry PI

A mount for Elecrow 5" touch display for raspberry pi ( https://www.amazon.com/dp/B07FDYXPT7 ) suitable for use with octoprint/octodash or other purposes. This is a remix of my console for the Adafruit 5" touchscreen with mounting points…

Pobrania
185
Polubienia
11
Ocena
0
P
PrintablesSimone Giordano

Raspberry Pi Camera Module 3 bed mount for MK3S

Oltre alle parti stampate avrete bisogno di 2 (due) viti a testa esagonale con filettatura M5 x 13 mm. Aggiornamento 07/09/2024 Aggiornati i seguenti files: Pi Camera Module 3 case - Front .stl Pi Camera Module 3 case - Back .stl Cradle…

Pobrania
179
Polubienia
12
Ocena
3

Vertical Stand for Raspberry Pi 7" Touchscreen Case

I have my 7" Raspberry Pi Touchscreen oriented vertically which does not work well with the original case design. Uses 4 M3x12 screws to attach using same mounting holes as the case. Made to provide access to all necessary ports, but USB…

Pobrania
170
Polubienia
17
Ocena
0
P
PrintablesLeonard_1995

Prusa MK3/S Einsy Raspberry PI 4B/3B- Remix with honeycomb and write

I modified the original files to add a honeycomb texture and a write. I don't have the MMU2, so i printed the things separately and then assembled. I upload the .gcode with 0.3 mm layer height, but for the screw, the write and the top…

Pobrania
169
Polubienia
56
Ocena
0
P
PrintablesHawkeye

Raspberry Pi4 enclosure in the classical Apple Macintosh SE style

This is a Raspberry Pi4 enclosure in the classical Apple Macintosh SE style. In addition to Pi4, the following components are selected & installed: Waveshare 4inch square LCD ( https://www.waveshare.com/4inch-dpi-lcd-c.htm ). Geekworm…

Pobrania
144
Polubienia
55
Ocena
0
P
Printableshuberjer

Cover Lens for ArduCam 8MP IMX219 Sensor 175deg Wide Angle M12 Lens Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2

A Remixed Cover Lens for a Raspberry P1 Camera V2 board with an ArduCam 8MP IMX219 Sensor module (for RPi and Jetson Nano) with a 175deg Wide Angle M12 Lens. I included the Step file for your remix convenience.

Pobrania
137
Polubienia
6
Ocena
0
P
Printableswhimmel

Raspberry Pi 5 Breadboard Case

Same as the original, but with some relief for the power button.

Pobrania
135
Polubienia
15
Ocena
0
P
PrintablesPI_3.14P

Raspberry Pi Touchscreen Stand

The touchscreen stand from McMatt ( https://www.prusaprinters.org/prints/15208-raspberry-pi-touchscreen-stand ) is great, but unfortunately only for one orientation of the screen. I have adjusted the support lip of the screen and the…

Pobrania
134
Polubienia
14
Ocena
5
P
PrintablesDaHouzKat

IKEA LED Light for the Articuled Raspberry Pi Camera

This print lets you mount an IKEA Halvklart USB LED spotlight to the Articulated Raspberry Pi Camera What you need Articulated Raspberry Pi camera LED IKEA Halvklart USB spotlight The printed parts Print instructions It is a tight fit,…

Pobrania
132
Polubienia
44
Ocena
5
P
Printableschoucroute6790

PiKVM Case Raspberry Pi Zero 2 + HDMI to CSI bridge

A small case for Raspberry Pi Zero 2 designed for PiKVM (DIY version with rpi zero 2) You need : 1x Raspberry Pi Zero 2 ( link ) 1x HDMI to csi ( link ) 2x hexagonal spacer M2.5 x 12mm ( link ) 4x screw M2.5 Parts to print (~ 1.5h with my…

Pobrania
124
Polubienia
10
Ocena
0

Raspberry 4B Case

Require a Raspberry Pi 4 B case with upright fan? Great airflow throughout the case with the inclusion of the upright fan. If you like this please consider buying me a coffee: https://www.buymeacoffee.com/missionrea9 edit: I added storage…

Pobrania
116
Polubienia
25
Ocena
5
P
PrintablesFalco

Raspberry Pi4

Filament : Devil Design. Green Transparent. PETG 0.20mm. 20% Infill: Honeycomb. Nozzle 230c. Bed 70c. Support : None.

Pobrania
115
Polubienia
14
Ocena
4,5
P
PrintablesHD_Creator

RaspberryPi 4 ultra performance housing

This strongly cooled housing is made for a multimedia center application and allows the RaspberryPi 4 to stay cool even at extensive load, like when playing 4k video. It is made to hold the RaspberryPi 4 itself, a 5V DC-DC buck converter…

Pobrania
110
Polubienia
27
Ocena
5
P
PrintablesGhezzz96

Raspberry Pi 2/3/3b+ case Creality Ender 3 LCD Enclosure

Remixed from ‘Creality Ender 3 Pro - Raspberry Pi 2/3/4 + LCD Enclosure’ by eoyilmaz, specifically v042 for Pi 2/3. Note: This remix only works for Pi 2/3 , not 4. When mounting it to the LCD panel, you should use only 3 of the original…

Pobrania
109
Polubienia
9
Ocena
5
P
PrintablesJiri Blazek

Raspberry Pi 4B Box (Noctua Fan variable)

Box for Raspbberry Pi 4B. You can use screws M2 8 mm. Fan is Noctua NF-A4x10 5V. Print instructions Material ASA.

Pobrania
105
Polubienia
8
Ocena
5
P
Printablescristi.a.lupu

Raspberry Pi AllSky camera

Case to build AllSky camera using UnderWaterDome…

Pobrania
104
Polubienia
18
Ocena
5
P
PrintablesmC_rOMeo

Case for Raspberry Pi5 + X1201 UPS Board + X1001 PCIe NVMe board

I needed a case for my pi5 with the original active cooler and the two Geekworm boards x1201 and x1001. I use the pi5 for my home automation. When I bought the pi5 and the boards there was no matching case and so I designed this one. I…

Pobrania
100
Polubienia
3
Ocena
0
P
PrintablesDubry

Camera and fan Module for Sneaks Snap together raspberry pi case

Printed in PETG with the default prusa settings.

Pobrania
91
Polubienia
16
Ocena
5
P
Printablesheximcz

Waveshare 7" LCD / Raspberry Pi Development Holder

Printed on Ender 3 Pro. Sliced in PrusaSlicer 2.6.0 Alpha6. I used organic supports. Infill pattern grid with 25% density. LCD: Brand: Waveshare SKU: 18625 Part Number: 7HP-CAPQLED

Pobrania
86
Polubienia
7
Ocena
0
P
Printablesnologoearth

SH!ELD zero - Case for Banana Pi BPI-M2 ZERO or Raspberry Pi Zero 2 W

Design Both the Banana and the Raspberry Zero are great little devices but especially the Banana definitely needs cooling, active if possible. An antenna to improve WiFi connection is also an add on you might want to have. This design…

Pobrania
84
Polubienia
12
Ocena
4
P
PrintablesPawel

MakerHawk Raspberry Pi Camera

Die halterung (Camera Gehäuse) muss separat gedruckt werden. https://www.printables.com/de/model/31592-makerhawk-raspberry-pi-camera-ir-fisheye-camera-mo

Pobrania
77
Polubienia
14
Ocena
5
P
PrintablesKutilman Yuri

Raspberry Pi 4B case with 40mm fan

I made this case because I wanted simple design with 40mm fan that I would like. Please note that this assembly requires: 20mm long M3 screws or similar 40mm fan with screws and with correct connectors. Gluing if you use transparent LED…

Pobrania
74
Polubienia
10
Ocena
0
P
Printablestlstommy

PiInk - A Raspberry Pi Powered E-Ink Picture Frame

An open-source, low-power, digital picture frame that gives images a natural, paper-like, aesthetic. Features: Web UI : A built-in interface to control PiInk and upload images over the network. Low Power : The E-Ink display only needs…

Pobrania
72
Polubienia
36
Ocena
5
P
PrintablesReedy

Snap On Back Cover for Raspberry Pi HQ Camera Module

Import of https://www.thingiverse.com/thing:4540545 by mikelane76 . Simple print and case that works perfectly for the purpose. Had to take a little bit of the PCB off the side of the camera from where it would've been attached to an…

Pobrania
69
Polubienia
6
Ocena
5
P
PrintablesMarv

4.3 LCD (WaveShare) Cover, Raspberry Pi 4

Here you find another LCD Cover. It´s for an 4.3 Waveshare LCD with Raspberry Pi attached. It can be installed apart from the printer for e.g. under the Printer Encloser as I did, with 4x Wood Screws. In the pictures you see Rev. 1.…

Pobrania
69
Polubienia
12
Ocena
4

Raspberry Pi + HiFiBerry XLR Streamer with 7" Touchscreen (Wall Mounted)

Items needed: Raspberry Pi 3 or 4 Raspberry Pi 7" Touchscreen HiFiBerry DAC2 Pro XLR Some plastic threading screws or you could add threaded inserts whatever you prefer. Easily adaptable for other DACs by modifying the connection box.…

Pobrania
68
Polubienia
4
Ocena
0
P
PrintablesB10K

Raspberry Pi 4 Mount for Prusa i3 MK3/S/+

Now you might be wondering to yourself: “Why didn't you just use a USB-A to USB-B Cable to plug the Pi into the printer and have the Pi powered separately from the printer like what a normal sane human being would do???” And to that, I…

Pobrania
59
Polubienia
15
Ocena
0
P
Printablesnetpaq

Raspberry Pi 3 Model A+ Snap Fit Enclosure with 3030 Extrusion Hooks

I needed a Raspberry Pi Model 3A+ enclosure for my Prusa MK3S+ OctoPrint installation. I extracted the 3030 extrusion hooks from this model and merged them with this enclosure model. There are two versions of the base, the first version…

Pobrania
57
Polubienia
4
Ocena
0
P
PrintablesWarg'Name

Raspberry Pi Case stand for Prusa MK4 (Pi 3b+) that works with LED Light Bar Prusa MK4

Hi, I remixed the stand done by tritschi because after installing the excellent led light bar for prusa mk4 , it was impossible to put the case where it originally stand. Also I wanted it to be near the logitech c310 camera stand by…

Pobrania
54
Polubienia
15
Ocena
5
P
PrintablesBeelsebob

Raspberry Pi HQ Camera Mount

A mount for the Raspberry Pi HQ Camera to sit inside the top of the frame looking down at the build plate. When combined with the 6mm wide angle lens, provides clear shots of the whole bed during a print. Bill of Materials 3 Printed Parts…

Pobrania
53
Polubienia
24
Ocena
0
P
PrintablesPat_S

Raspberry Pi 3B+ case for the Prusa MK3S (Remix) / Raspberry Pi 3B+ Gehäuse für den Prusa MK3S (Remix)

Remix of the case by dktosoch. https://www.thingiverse.com/thing:2844013 The housing now fits on top of the Prusa MK3S and can be fixed with two M3x10 screws. Happy printing! If you like this thing leave a like or post a make. I'm always…

Pobrania
45
Polubienia
2
Ocena
0
P
PrintablesHussain

Raspberry Pi 4 Passive Aluminium Heatsink Case Mount for Original Prusa Enclosure

This is a remixed Raspberry Pi 4 mount made to fit the Passive Aluminium Case Mount for Original Prusa Enclosure. I have designed the raspberry pi can be removed from the top with ease. Also I have added windows to vent out the heatsink…

Pobrania
44
Polubienia
7
Ocena
5
P
Printablesdsimp387

Raspberry Pi Pico W Protective Travel Case

Raspberry Pi Pico W Protective Travel Case V2 This is a simple case that I modeled to protect my pico w board and the header pins whenever I need to take it with me somewhere. It secures the pico w board well to the point where it won't…

Pobrania
38
Polubienia
5
Ocena
0
P
Printablesxanderthol

Raspberry Pi Zero Stack Plate

I made this plate to stack my Raspberry Pi zeros and zero 2s. The Raspberry Pi's can be screed down to the plate with four m2.5 screws, I used these…

Pobrania
37
Polubienia
2
Ocena
0
P
PrintablesFeuer

Raspberry Pi Camera Mount for "RAM-Mount" 1 Zoll (25,4mm) Ball

Raspberry Pi mount for "RAM Mount" with 1 inch ball.

Pobrania
36
Polubienia
10
Ocena
0
P
PrintablesDan Rogers

Attractive case for Eleclab 7" Rev C screen and Raspberry Pi

Here's a compact case that holds an Eleclab 7" touch screen Revision C. Since that screen is also a RPI add on, it also holds the raspberry Pi. The case and case back should be printed separately. Use snug supports to print the case, they…

Pobrania
35
Polubienia
3
Ocena
0
P
Printableshosebei

Raspberry PI 5 + NVME Base + HifiBerry DAC2 Pro Case

I build a Volumio Player with the following items: Raspberry PI 5 pimoroni NVMe Base for Raspberry Pi 5 HiFiBerry DAC2 Pro (No Affiliate links whatsover) I could not find a suitable Case, that is why I created my own :) Not perfect, but…

Pobrania
33
Polubienia
5
Ocena
0
P
PrintablesTache

Prusa Mount for Squirrelbrain's Raspberry Pi Cases

This is a simple mount for a RaspberryPi. The case I made this for was designed by @Squirrelbrain , listed below. You can use is anywhere else you want a simple mount for those cases. I used 2 M3x10 screws with nuts to attache to the…

Pobrania
32
Polubienia
4
Ocena
5
P
PrintablesPetr Šlachta

Raspberry pi 4b case with SSD drive slot

Modification of original Malolo's screw-less Raspberry case - “Bottom_Base_SM” with additional slot for SSD drive's PCB ! Make sure to adjust the pillars spacing to fit the holes of your PCB ! Instructions: Pop open your SSD drive and…

Pobrania
28
Polubienia
3
Ocena
0
P
PrintablesJagesh

Raspberry Pi 4/4B Mount for GeeekPi Case on MK3/MK3S/MK3S+

Uses 2 M3x8mm screws to mount to the frame. Print instructions: -Brim recommended -No supports -0.2mm layer height You can buy the case here: Case + Power supply: https://amzn.to/4f2fVIn Case only: https://amzn.to/40lDUOb Have included a…

Pobrania
27
Polubienia
5
Ocena
0
P
PrintablesOpenscaddad

Raspberry Pi Bracket for Dell 1908FPc Monitor

In the early 2000s, Dell made a series of monitors that had an optional sound bar powered by a 24w, 12v barrel jack. These monitors also functioned as a USB hub. Pictured is the back of a 1908FPc monitor and a 3D printed bracket that…

Pobrania
27
Polubienia
4
Ocena
0
P
PrintablesNikosSprocket

Combined rail mount for Raspberry Pi 4 and BTT U2C CAN board

There are 2 versions available; Short and Long. Depends on the space available between the BTT U2C board and the printer's side panels. Also, included an easily printable spacers to include between the boards and the rail mount.

Pobrania
26
Polubienia
5
Ocena
0
P
PrintablesKlaasYK

Raspberry - Antweight Battlebot

Winner of the first edition of Boeliebots in the Groninger Forum, this is Raspberry. A horizontal spinner Antweight Battlebot. Weighing in at only 140 grams, it's maneuverable and can deal quite some damage to it's opponents. Printing…

Pobrania
25
Polubienia
5
Ocena
0

Raspberry PI Kammer Reflektionsschutz

Reflektionsschutz für ein Raspberry PI Camera Modul

Pobrania
24
Polubienia
2
Ocena
3
P
PrintablesScott Gibb

Prusa I3Mk3s+ Raspberry Pi 4 Case

Summary I found that my Raspberry Pi 4 was overheating when running Octoprint, so I decided to buy a heatsink to solve the problem. The one I bought is really good due to its massive case. However none of the existing cases for the Prusa…

Pobrania
22
Polubienia
2
Ocena
0
P
PrintablesCrami

Raspberry PI 4 Holder for Prusa Enclosure

A snap on holder for a full aluminum cooling case like this one: https://www.aliexpress.com/item/1005006112061018.html Prints without Support. Recommend 3 perimeters and 20% infill. Only needs two M3 Screws and nuts to mount to the…

Pobrania
22
Polubienia
2
Ocena
0