2924 modeli
The charging cable always breaks at the same position, just right under the plug. Don't replace it, Repair it with this easy print! This works for Apple USBC and lightning, as well as for samsung charging cables! No glue or tape is…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
This is a repair clip for your broken Ethernetcable. You can easy print it. The clip makes it possible that the cable does not always slip out so easily when the clip is broken off at the top. To print: you can use PLA too Use supports
Wydruk około 0,25 €–0,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
All-in-one Repair Kit for a Broken Flush Mechanism. Straight and Angled Levers included. American Standard. No Supports! Higher Infill on Lever Arm Recommended. Assembly Order: Bolt (Cut-out towards the Chain) Nut (Counterclockwise…
Wydruk około 1,92 €–2,35 € nettoWstępna wycena jednego wariantu
What is it? Printed part to connect the particleboard floor of a drawer to its chipboard backpanel. Tested with a repair and enhancement on my 2012 IKEA MALM chest's drawers. Might work for others with the same design too. Why use it?…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Zip-Tie Garden Hose Coupler | 16mm Water Line Connector This simple yet effective 3D printed connector lets you quickly join two 16mm diameter garden hoses without specialized tools or fittings. Perfect for extending your watering reach…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Modification of the model by Plutho to accommodate two instead of three AA batteries. This model may need to be customized as needed.
Wydruk około 1,81 €–2,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
An RFID chip repair case is a practical accessory designed to address common issues with RFID chips. When a new RFID chip is inexpensive but new one may encounter registration problems, this case offers an alternative. If the side cover…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
Description: A buckle designed for easy replacement of a broken one without the need to unstitch your bag. Simple to print and assemble. Recommended materials: ASA or PETG. Supports are required – organic supports were used. Fits: 19mm…
Wydruk około 1,40 €–1,71 € nettoWstępna wycena jednego wariantu
Flexi toy Patrick Star from the SpongeBob SquarePants cartoon series. It has a movable head. The arms legs and waist (if starfish actually have anything like that). The model is adapted for easy printing with a 0.4mm nozzle with a layer…
Wydruk około 1,23 €–1,50 € nettoWstępna wycena jednego wariantu
You can use these clamps when repairing for instance an iPad screen and you need to clamp the edges while the glue sets. I recommend using automatic support painting on the C part of the clamp and using organic supports. When printing in…
Wydruk około 2,16 €–2,64 € nettoWstępna wycena jednego wariantu
The mounts are designed for handlebars + handlebar tape with a diameter of 40mm and increased ground clearance. I printed whit PETG them with 4 perimeters, 10% honeycomb infill, without top and bottom layers.
Wydruk około 2,36 €–2,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
1.- Introduction As with all prints I do, all start or from a need, a fix or a lust-to-have. This model was designed as a fix for a broken heel in a sky boot from a good friend, that got deteriorated due to age and use. 2.- Design Process…
Wydruk około 3,89 €–4,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Baseball Patrick from Spongebob Squarepants.
Wydruk około 2,61 €–3,20 € nettoWstępna wycena jednego wariantu
Holden VY / VZ Centre Console Flip Lid repair TAB, This will also suit some US & exported models. Printed in ABS, 50% Honeycomb Infill, 0.15mm Layer height, Print 3 or 4 at once. Brim can be used if you have adhesion issues, These have…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
Needed to fix my patio umbrella. Two of the arms broke after the wind knocked it over. Just needed to use some M5x35mm bolts with some washers and nuts. I used some nylon washers since it's supposed to be able to to articulate when…
Wydruk około 1,77 €–2,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a Gridfinity Storage Case for the Prusa Mini+ (Kit) 3d-printer you can store up to: 1x Needle-nose pliers Nozzle cleaning stuff 1x Universal wrench 4x Allen keys 1x Torx key 5x Glues for printbed 8x Nozzles Prusa mini + Sparparts,…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
My FRITZ!DECT 301 Radiator valve plastic connector circle broke after it got hit to often. First I gave it a kick and then my kids made the rest. The radiator is in a small room and so it is quite easy to oversee, when you bend over to…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My Print Parameters: Resolution: 0.2 Nozzle: 0.4 Seam position: Aligned Infill: 15% Top Layers: 6 Bottom Layers: 5 Perimeters: 2 Rafts: No Supports: No Material: PETG Prusament Signal White/Lipstick Red, Urban Grey Happy printing!
Wydruk około 0,18 €–0,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Weight plates for blinds sometimes become brittle and break when removed from the connecting chain. Several popular repair solutions ( https://www.printables.com/model/147266-89-mm-lysel-slatted-curtainvertical-blinds-weight ) suggest…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Small parts tray for Feedback Sports Pro-Elite bike repair stand As I have enough storage space / room in the workshop (workbench etc.), I didn't need a large tray for the assembly stand. The holder is sufficient for valve caps, disc…
Wydruk około 7,91 €–9,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Window handle repair set
Wydruk około 0,76 €–0,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Clip to replace a broken one on your dryer horse with 15mm inner diameter rods. Print two halved pieces that join when forced into the rod. No supports needed due to half cut design.
Wydruk około 0,51 €–0,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a repair for a Ford Transit headlight housing. Housing arrived with a broken tab and instead of returning, crafted a repair. This was on an upgraded Ford headlight (projector beam) on a Storyteller Camper Van. Printed in ABS and…
Wydruk około 0,50 €–0,61 € nettoWstępna wycena jednego wariantu
This part is for this particular water bottle that is sold online and in stores in North America: “Zak Designs Minecraft 18/8 Single Wall Stainless Steel Kids Water Bottle with Flip-up Straw Spout” No doubt, there is probably…
Wydruk około 0,25 €–0,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The wings and hook are completely my own design as they were missing from the wreck. Made some modifications to the undercarriage to make it more durable.
Wydruk około 3,54 €–4,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Greetings this is rubik's cube version 2 referring to the animation spongebob squarepants and his soft brain You will need: 1 ballbearing 20mm diameter 8x 5x5mm round magnets These can be found at any local hardware store here is the link…
Wydruk około 3,06 €–3,74 € nettoWstępna wycena jednego wariantu
Glue the two parts together and replace the old one with the new one.
Wydruk około 0,65 €–0,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
TL;DR A broken plastic part with less than 1 g has been redesigned and 3D-printed, thus avoiding 975g of garbage in the form of a defunct mixer. Machine to repair Our Siemens hand mixer MQ90001/02 broke about 3 years ago. Thanks to the…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
Commonly failing plastic components in motorhome window blinds can be a persistent issue. This repair kit provides a durable, 3D printable solution to replace worn or broken parts, restoring full functionality to your blind system.…
Wydruk około 0,95 €–1,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The clamps holding my 25 odd years old Klick fix attachment to the handlebar broke. I found it was quite easy to print a replacement. Print with PETG, flat on the bed. Use roughly 6 perimeters to make it strong.
Wydruk około 0,61 €–0,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
EN: Yesterday, the connection piece of the hose of the above-mentioned blood pressure measuring device broke off. A replacement was needed. Here is the result. It works. Could be that it also fits other devices. The inner diameter…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Steer Tube Cork for Fox 36 with Storage for this tubeless repair kit: https://www.amazon.de/gp/product/B097GCH7H8/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1 The repair kit and the cork must fit tightly so that they do not loosen on…
Wydruk około 0,92 €–1,12 € nettoWstępna wycena jednego wariantu
Vytvořeno na opravu ulomeného zámku 4pin konektoru Fabia 1 (6Y5) palivového čerpadla. Mělo by být kompatibilní s dalšími starými modely koncernu VAG (VW/Audi/Seat/Škoda)
Wydruk około 0,25 €–0,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Part can be printed in two pieces without affecting functionality. Attached are both the two piece and one piece model files. One piece print will require supports, two piece will print without, just add brim and print. On the two piece…
Wydruk około 10,96 €–13,40 € nettoWstępna wycena jednego wariantu
Repair of the postal lock key The plastic handle of the key is broken. It was based on the keychain of the author of the Modern Key Hanger model. The size of the inserted part of the key is 8.6 mm x 1.7 mm I printed myself in brown…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a simple, yet effective repair piece designed to fix broken foldable clothes drying racks. When one of the welded joints on my drying rack broke, I created this bracket to restore functionality and extend the life of the rack…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
I printed this replacement part in PETG. This first step is necessary to encapsulate the replacement part: I removed the damaged plastic from the top of the joystick, leaving only the joystick stem, which I sanded down to form a perfect…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Sharan spare wheel winch cable guide repair. When the wheel broke down, I discovered that my spare wheel located under the car could not be removed. After disassembly, it turned out that the steel rope that winds the wheel is twisted…
Wydruk około 1,48 €–1,80 € nettoWstępna wycena jednego wariantu
i design it to repair my shower, work by adding teflon on the thread to make the thread water tight SUPPORT NEEDED use 99 wall to print it to make it watertight and use heat resistant filament idealy
Wydruk około 2,35 €–2,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model fits into the “receiver pods” on the 106 Repair Stand Work Tray add-on for Park Tool bike repair stands and holds a magnetic parts tray. I made two versions to hold either a 4" magnetic parts holder or a 6" magnetic parts…
Wydruk około 2,04 €–2,49 € nettoWstępna wycena jednego wariantu
SBACH 342 EPO RC airplane repair kit for rudder mounting rudder mount for 12x16mm hinges back wheel steer base For 12x16 mm hinges If you like it, please support me: Paypal: [email protected] Skrill: [email protected] ★…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I found my vacuum cleaner stuck at middle of room with stuck right wheel. When I took it apart, I found that screws what hold wheel in piece jumped out and blocked rotation. They jumped out because threads on opposite side of wheelhalf…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Motivation A week or more ago, our old frying strainer handle broke due to its age, heat and use. Just before moving the remaining strainer to the recycle garbage, Printables.com decided to put up a contest on repairs , so I took the…
Wydruk około 1,31 €–1,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Replacement for a destroyed part that connects the eyelet to the handle Need more padding for greater strength of the part Recommended material for printing is PETG
Wydruk około 0,69 €–0,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A easy as possibly part to repair a broken dust collector. I will create my own dust separator soon but until then i need to repair the broken one. Stopped the print while it was hugh enough - hours before the regular end.
Wydruk około 11,53 €–14,09 € nettoWstępna wycena jednego wariantu
The two parts can be screwed together with threaded rod M4. then can be inserted in the hole made by the broken hook and rotated 90° to secure it. You will need to make 2 small indentation in the tractor chassis to allow the securing form…
Wydruk około 0,26 €–0,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
It's time to prepare summer. Doing it last weekend I discovered that one of the wheel of one of my old deckchair was damaged. It wasn't possible to securely repair it using glue and as usual no way to find replacement or a cheap part that…
Wydruk około 0,43 €–0,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A hook for repairing a suction cup
Wydruk około 0,26 €–0,32 € nettoWstępna wycena jednego wariantu
This piece will replace the little brass threaded inserts that commonly pull out of the plastic on the rearmost rear fender attachment points of an Alta MX and MXR, or the second to last pair on EX, EXR, and SM models. There are models of…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The projection unit of a radio controlled alarm clock went off after it fell to the floor (frequently I assume). The projection unit can be swiveled around about 90 °, i.e. the repaired one should have kind of a stop. The model consists…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The interior door "pull" on my Scion XB fell off when I attempted to pull the door closed. After years of wear, the screw hole in the bottom of the pull ripped out completely, leaving behind the screw. I created this insert so that I…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
I designed and 3D printed replacement parts for my first ukulele: - tuner bushings (snap-fit) - bridge saddle (custom shaped) One of the original bushing was missing, and the saddle was damaged, so I recreated both parts using Fusion 360.…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
The Fur Free® lint remover works exceptionally well due to its base acting as a cleaner for the broom. But the handle is notoriously breaking since one can apply excessive force with it. This repair handle fixes this problem. The profile…
Wydruk około 2,26 €–2,76 € nettoWstępna wycena jednego wariantu
This is a replacement part for the attachment of the stainless steel wisk head for the Arendo Milk Frother 'Mini Milk Star'. The original attachment is of weak design and after 1-2 years of every-day use, it breaks. I replaced it already…
Wydruk około 0,38 €–0,46 € nettoWstępna wycena jednego wariantu
repair side for a cardboard reel filament . for laser DFX file and for FDM . size 210 OD ID 40mm thick 4mm
Wydruk około 3,94 €–4,82 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The PCS-10 line of Park Tool Repair Stands have a collar with “receiver pods” to hold the 106 Repair Stand Work Tray. The work tray also has "receiver pods" to hold tray accessories, but they are spaced more closely together than on the…
Wydruk około 1,43 €–1,74 € nettoWstępna wycena jednego wariantu
This part was designed to fit on the Rittal 3243200 outlet filter housing. Its purpose is to repair instead of purchasing a complete new filter housing. 2 perimeters, 40% infill It fits snug on the remaining ”lip”, this version needs to…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
Lost one foot for the Hama K210 Keyboard - so I made two new ones. The slot with for the foot is approx 18mm In case this is useful for you please leave a like
Wydruk około 0,09 €–0,12 € nettoWstępna wycena jednego wariantu
Gusset for repairing Volantex TrainStar motor wall. If you broke it in this place , just print this gusset and glue it with CA glue! If you like it, please support me: Paypal: [email protected] Skrill: [email protected] ★…
Wydruk około 0,44 €–0,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
SBACH 342 EPO RC airplane repair kit for wing mounting plate for insert nut plate for 5mm nylon bolts For 5mm bolt and 5mm nut If you like it, please support me: Paypal: [email protected] Skrill: [email protected] ★ Thank…
Wydruk około 0,97 €–1,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Protective Storage Case for Fragile LED Magnifying Glasses (Electronics Repair Goggles) These low‑cost LED magnifying glasses are handy for electronics repair, soldering, inspection, and detailed work—but the frame and head‑mount are…
Wydruk około 6,90 €–8,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This clip was design to fix/repair/secure the broken or loose tab of a RJ45 Ethernet connector and avoid crimping. Designed to prevent from moving, wiggling, falling from the connector and easy to install. UPDATE 27/01/2021 Added the 3…
A buckle designed for easy replacement of a broken one without the need to unstitch your bag. Simple to print and assemble. Recommended materials: ASA or PETG. Supports are required – organic supports were used. Fits: 20mm strap 25mm…
Body hinge requires widening the hole to 10mm. Door hinge to 8mm. The screw spacing in the door plate is 45mm, and the offset relative to the box axis is 9mm. The screw spacing in the body plate is 32mm. The thickness of the tiles is…
The X01 Power armor from here: https://www.thingiverse.com/thing:1284097 Repaired using MeshLab and Microsofts Repair service. Category: Creatures
Based on DUMMY 13 Beta - Oct. 2023 DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 I don't always need a complete set, but just individual pieces because I need to replace parts or want to print parts…
These are replacement clips to fix broken ethernet cable clips. The clips attach to the Ethernet cable and replace the broken clip so that the cable stays locked into an Ethernet port. EDIT - For some reason Simplify3d doesn't like this…
I've been enjoying modelling SpongeBob characters lately, so I thought I'd try my hand at making Fred the fish. Done in Blender using mostly subsurf and boolean modifiers.
This design is a unique combination of the short designs, where the latch is fixed at the connector and the longer designs, where the clip is mounted to the cable behind the collet. The design considers the exact dimensions of the collet…
You can put them on the handlebars in the normal position and turn the bicycle afterwards. They are designed for the handlebar with a diameter of 23 mm . I printed them with 4 perimeters, 15% honeycomb infill, without top and bottom…
Organize your garden with ease using this 3D printable garden hose holder – inspired by various designes out there and reinterpreted for practicality, durability, easy printing and broad compatibility with home 3D printers. Features 8…
My AMS roller supports cracked. There's a hot fix here from BambuLabs which works great but it means the existing little boxes I printed don't fit anymore. So I made it back from scratch with groove to fit. I also added a little grabber…
🧰 Screw Organizer Box for Repairs & Disassembly 📦 Description This 3D-printed screw organizer is designed to help you keep screws, bolts, washers, and small components neatly sorted while working on electronics, machines, or furniture.…
Customizable sewing button for clothing repair. Requires OpenSCAD, BOSL2, and hkern0_scad libraries. Vary diameter, thickness, number of holes, size of holes, etc. 25-01-18: Added 9mm sample buttons 25-01-21: Added 11mm, 13mm, and 17mm…
Ethernet cable fix which prints WITHOUT SUPPORTS. The layer line orientation aids in keeping the cable in the port. Print settings: layer height 0.2mm 3 thick walls Infill: Does not matter since the piece is too small to even have infill…
Swan, with a small support built in to hold the nose without any extra supports needed
A functional replica of the Steam Deck Repair jig seen in Valve's Steam Deck Teardown Video . Handy for keeping the Deck stable while upgrading the internal SSD or replacing drifting thumbstick modules. This is a remix of ryohazuki224's…
'Remix of https://www.thingiverse.com/thing:2156108/ Flattened via MeshLab, repaired and the file with "reduced" in the name is only 47,7 MB big, the other one is 137 MB and a real mess to slice Print Settings Printer Brand: Prusa…
You don't have a 3D printer but you need it? Buy on Etsy with Worldwide shipping → buy here __________________________________________________________________________________ IKEA spare part number 10087158 / 10082805 Fits only IKEA…
After breaking and losing a bag strap buckle and searching for a 3d design to print and replace it, I realised that a fully parametric replacement strap buckle clip thing would be really handy, so I could … retro fit it to fix the one I…
Repair Clip for Clothes Drying Rack The metal rungs of drying racks tend to snap off after some time, leaving the metal part dangling. This clip fixes that. You will need to bend the rung so that it securely attaches to the clip. The clip…
The Beats Studio 3 headband commonly breaks where it meets the folding articulation. Mine were not spared. May also work for other Beats Studio, Studio 2 and Studio Pro. This was only tested on the Beats Studio 3, for which it is a…
i got really tired of thin pushers on 1914 bumper, that brake in like 5 min of usage. so i designed spacers u can print youself. they fit tight and not tend to break, cuz they are not part of bumper itslef. place seam on the back(up)…
Based on DUMMY 13 Beta - Oct. 2023 DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 This time I take a different approach to printing the difficult frame parts and use runners not to connect different…
A little support is needed but comes off quite easy
Our kids love this books! Unfortunately the pages suffer from the extensive use. Especially the front- and the back-cover get damaged and ripped out by the binding, the cover separates from the rest of the book. Repair Instructions Print…
This is a modified version of the design for the hinges we have at home. European hinges.
This extruder cover will fix the Creality K2 extruder that the Bowden connector is broken. I printed in ABS. This allows the Bowden tube to pass thru into the Bowden connector of the extruder. You will need one PC4-M10 fitting. 2 M3 30mm…
Repair set for broken drying rack with M4 threaded inserts I saw the repair kit for the broken strings on a drying rack by STxS . I tried it and it fitted for my drying rack. This remix replaces the M4 nut holder with threaded inserts,…
Easily 3D Printed tool that is used to remove adhesive between two parts that have tight tolerances between them and are fragile. Most commonly used when removing touch screen from an phone or tablet. IF YOU HAVE A RESIN 3D PRINTER I…
Cut off the remains of the rubber part on your windshield cowl and attach these printed ones. OEM PART: 51718208483 Mirror the end part to use it on the other side. Print multiple mid parts to cover the entire length. Printed from…
Ok... the original model is a beautiful work of art. There are, however, several issues with it. After no replies from the designer, I took it upon myself to repair the model and modify it for my own needs and to suit my own tastes. NOTE…
Just a fun mashup I slung together. Supports are needed for this model. Remixed from these two files: https://www.prusaprinters.org/prints/32751-dr-smolder-bravestone-dwayne-johnson https://www.thingiverse.com/thing:4575259 **This design…
I got annoyed the original model by @JamesThePrinter, cool as it may be, isn't manifold so I fixed it.
This remix is a technical refinement of the original toolbox tray, specifically tailored for Snapmaker U1 users. Key Enhancements: Fixed Geometry: Repaired 82 non-manifold edges for error-free slicing. Ultra Material Efficient: Reduced…
I recommend printing it in ABS, but PLA and PETG will work just fine. Its designed to be printed supportless, when you print it like a tower.
This is a spacer meant to be used to repair joy con drift using the method shown in this video: https://www.youtube.com/watch?v=Vid8lIXmZwE Instead of cutting cardboard and that imprecision, you can just print this spacer instead for that…
Had some trouble with the original model printing the helmet visor weird since the external visor is so thin and the model has an internal visor preventing infill from getting to the front of the helmet. Corrected it in blender by…
This is a replacement "wishbone" to hold the speaker as the top part of mine broke, this model is a bit sloppy but works well. There is a steel C clip on the original part you will need it to hold this to the headband same as the…
Long time ago I wanted to make a realy nice monarch butterfly. The butterfly was printed with PLA 1.75 mm (GD Filament). As I uploaded the colored 3mf file - you can simply swatch the colors as per your wish and simply print it - you dont…
![Cable Repair and Protect for iPhone and Samsung [lightning+usbc]](https://media.printables.com/media/prints/590112/images/4827822_b916b887-676b-4723-b0c9-90881c40951e_31bb8182-a7ba-4745-adfd-b9d44646baac/195cfe9b-40fc-4570-b695-c540798fc979.jpeg)
