UHF/PL239/PL259 screwable caps
Screwable caps for UHF type connectors according to 5/8 - 24 UNEF
Wydruk około 0,34 €–0,42 € nettoWstępna wycena jednego wariantu
- Pobrania
- 180
- Polubienia
- 17
- Ocena
- 5
384 modeli
Screwable caps for UHF type connectors according to 5/8 - 24 UNEF
Wydruk około 0,34 €–0,42 € nettoWstępna wycena jednego wariantu
Ein Einfülltrichter für diese Miorkly Gewürzgläser: https://amzn.eu/d/0cwdLx6 Der Trichter kann zur einfachen Anwendung auf die Gläser geschraubt werden. Die obere Einfüllöffnung hat ca. 70mm Durchmesser. Translation DeepL: A funnel for…
Wydruk około 1,97 €–2,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
It is a housing for the BREWA 100W 230V/230V isolation transformer. LEDs, fuses, switch and socket are built in from the front. Power socket on the left. I also prepared ventilation holes (they are not calculated whether the hole is…
Wydruk około 0,21 €–0,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This cable mount can be screwed or glued in place and is available for 3mm - 9mm thick cables.
Screwable headset holder. Can be used on desk up to 35mm. Headset width must not exceed 38mm.
Gridfinity is the popular Modular Storage System invented by Zack Freedman. This is a remix of his baseplate . There are already many great remixes of this baseplate out there (e.g. Gridfinity Screw Together baseplate ), but I could not…
I wanted something simple, rugged and compact to EDC one pill of Ibuprofen, without its packaging being damaged by other tools I'm carrying in the same pocket. It was my first attempt at designing something with a thread in FreeCAD and it…
40mm high paint cones (or tetrahedron to be precise !) that you can stack up and screw on your work surface if needed. The corner are rounded to not get stuck on the part you want to paint. If you don't need to screw them on the work…
The original model couldn't be used on my desk because it is much thicker then 35mm, so I remixed it. You'll need screw.stl, plate.stl and nut.stl files from the original model (…
Heyhoo Here I have a new Container for you :) Perfect to store away some dry stuff like Coffee or other things! In addition to the obvious, that the container is as well sealed as possible, I also took great care to ensure that it is very…
Dies ist ein Remix vom AMS Stack von LusBueb. Ich habe die Öffnungen verengt, somit wackeln die Steckverbindungen weniger. Ich habe auch die Abstände zur AMS verengt für eine stabilere Verbindung. Zusätzlich habe ich auf die die Lösung…
Cable Clip with screw hole. Printable without support (sidewise).
Beide Teile sind in einer 3MF Datei. 2 Versionen: Eine komplett geschlossene sowie eine Version mit Löchern zum durchfädeln eines Bandes zum umhängen. Die Kugel wurde für ein Köstum als Froschkönig konstruiert. Both parts are in one 3MF…
A Pill Pill capsule, or pill shaped screwable container. To be completely waterproof, an O-ring must be added. Inner diameter should be Ø14-Ø18.5mm. Thickness 2-3.5mm. There is also a version for use without O-ring. The watertightness…
Buffer space hook which allows screwing the buffer to the wall.
Cable Clips in different sizes: 1 x 3 mm 1 x 4 mm 2 x 4 mm 1 x 6 mm 2 x 6 mm 1 x 8 mm Printing Parameter: Material: PETG Resolution: 0.2 mm Perimeters: 3
Snowman statue with hidden compartment (18x118mm). Just unscrew the hat! ;) There're two versions of hat. File "hang_hat" contains model of the hat with hole at the top of the part, so you can piece of string to hang snowman somewhere.…
Welcome to the world of Good Behavior Reward Coins, where positive actions are celebrated and children's growth is nurtured. This is a collection of delightful tokens, including hearts, stars, cars, and more, designed to reinforce good…
Best printed with 0.4mm nozzle in PETG 0.2mm layer height for the container and 0.15mm the threaded section. Put an Insert of TPU filament into the container to make it water and airtight. (not scientifically tested)
Cable grommet which screws into each other from two sides. Two models; one for ~4-6mm thick wood, one for ~10-14mm thick Used this on my camper. Might need to scale inside/outside part by 1% bigger/ smaller in X,Y to create extra…
Use V-bucks from Fortnite as reward tokens. V-buck and collection tower is included. I use this with my kid. He earns the tokens by doing tasks and when he has collected 10 he can exchange them for actual in-game v-bucks or money. I…
I made a reward system for my kids. Everyday they do their chores they get a French fry. When they have 10 fries we go to McDonald's. I raised the bottom and made it hollow so you can add weight. Printed in red ReForm - rPET from…
Gridfinity is the popular Modular Storage System invented by Zack Freedman. This is a remix of a remix. This remix baseplates can have magnets installed without using super glue. You'll want the source found here:…
Description Become the Easter Bunny this year by printing your own eggs at home
I needed some few cable fasteners to fix a cable on a kitchen cabinet. I had the choice to order a set of 100 and wait some days for delivery or to design my own and print them in less that one hour…
This door hinge is designed for the Voron Switchwire. The design had to be easy to assemble due to screw connections on the panels and doors, but still easy to disassemble. This is why an m4x50 bolt has been chosen as a coupling pin…
Round screwable container The height of the layers is 0.20 mm
Just a remix to be able screw RPi to frame using tnuts.
Oval Container Please read slicing instruction below. Print instructions In order that the thread runs smoothly the layer height at the thread-layers should just be 0.15mm, (on both parts!!) The other layers can be 0.2mm or higher! You…
This is a holder for caliper. It should fit most 15cm calipers out there. One version is for screwing to something, other version is to mount on a french cleat wall. print instructions print in standing position for screwable version, use…
Print it as it is aligned in the STL file to be able to print it without support and still have a strong hook with long lines. Aligned at 45 degrees on the bed, 0.4mm nozzle, 0.2mm layer height. 3 walls, you can add more if you want an…
I needed a little screwable box. I used the silica model (please see the remixe link) because the screw works great. It was printed in PETG, but should also work with other filaments like PLA.
I uploaded a glueable, screwable and a Magnet Version For the Screw-Version the distance from Screw to Screw is 65mm (Midpoint) UPDATE: 23.03.2022 added “Bohrschablone.pdf”
Material Material: PLA/PETG Layer height: 0.2mm Support: no Brim: no Description If you own smart thermostats from Tado, chances are high that you have to use this annoying little bridge. Since the signal range is quite bad, you have to…
These tokens are super cheap and very fast to print. They are tangible items that feel like toys in themselves. Children love receiving them because they are fun. I redeem them at $1/token and allow my child to buy things at actual stores…
Screwable headset holder. ( remix with already inserted nut ) Can be used on desk up to 35mm. Headset width must not exceed 38mm.
Printable pill holder with screw cap. This remix has a little bit bigger key chain loop. Print at 100% to hold pills. I printed at 125% and perfect fit for a USB to USB-C adapter.
A little remix of TomHoyleDesign's model that allows you to fix it firmly to your desk.
I wanted a little holder for the card rewards so I modeled this. You can grab cards from the top, then put the ones you didn't pick on the bottom easily. I wanna do some for the act cards and the potions/relics as well, but I haven't…
This is a remix of the fantastic Splitter but not screwable. Thank you @ EdJohnson for the great peace.
Attached are STL and BGCODE files (PLA)
A simple pot to store whatever you need Classy design Easy print (no support required) Scale it to your needs Edit 1: Uploaded an STL with improved tolerances and rounded corners on the thread Edit 2: Fixed STL orientation for…
This is a regular old egg that unscrews to reveal a hidden compartment. It could be used to store candy for an Easter egg hunt, or to hide very small quantities of treasure.
@fredster's version was too tall for my Platsa cabinet. So I shortened the long part to 160mm. So I can open both AMS so
Remix on Plastic Flow's baseplate design. The original design was my favorite base plate model except for one thing: you must glue the magnets in! It's also near impossible to remove them once they are glued in without damaging the base…
📝Description This is a 3D-printed adapter for the LIDL Parkside 20V battery that turns it into a portable power source . Thanks to the use of a custom-designed clamping mechanism , there is no need for glue to secure the connectors ,…
A simple pot to store whatever you need! Classy striped design Easy print (no supports required) Scale it to your needs Edit 1: Uploaded an STL with improved tolerances and rounded corners on the thread Edit 2: Fixed STL orientation for…
The trick is to print the part in the right orientation so it can withstand the force. This prevents the layers from delaminating. To Note: Print it without supports you may have to recut the thread The thread is M10x1.5, you can also use…
This is a design I made in Fusion 360 because I received a spool of ribbon that was made out of paper, and quickly fell apart. This is designed for about 5M of 18 mm wide ribbon. I will possibly made more versions to support other lengths…
This is a little container that can be made with PLA-200c. Make sure you scale up the lid by a few mm for some tolerance that way it can screw on
Handles compatible with Plastic Flows screwable Gridfinity baseplates . The included files are for cylindrical M3 screws with a 5.5mm wide head according to DIN 912/ISO 4762 with the handle being 7mm thick. Print Settings I had no…
Designed to slip over the feet of the Anycubic Kobra 2 max. Should fit other Anycubic Kobra 2 printers as well (not tested). suggested Slicer settings: Filament: TPU 95A Layerhight: 0,2mm Perimeter: 2 Top/Bottom Layers: 10 (to get a…
I made a firewall for rc planes. You can glue one side to the plane and screw the other to your motor. It's 49.5x44x2mm on one side and 2.2mm on the other side because of one motor. the holes aren't perfectly aligned because my motor…
Buffer space hook which allows screwing the buffer 10° angled.
Verschraubbare Dose in zwei Größen. Kann mit O-Ring der Größe 20x3 oder 22x3 abgedichtet werden. Gedruckt mit PLA, nur mit genug Perimeter, ohne Infill. ………………………… Screwable container in two sizes. Can be sealed with 20x3 or 22x3 O-ring.…
Second design of the Platsa Pliers hanger. Strenghtened the outter walls and extended the thickness to 4mm. Also extended the "legs" to ~70mm. Simple and fast 2 print. Printed in PLA/PETG/Does not matter.
Elite Test Swappable Firewall, it is 5.1 cm wide by 4.35 cm tall by 2.4 mm thick Category: R/C Vehicles
Plug/cover for the threaded holes of the Mennekes 1419 wall mounted power socket or similar. Since it's scripted you can adjust the parameters to suit your needs or obscure application. Current configuration: Thread diameter: M25 Thread…
This ist a smaller X-part for the Stand. This is long enough to open the AMS completly.
broke the factory clips off the brake lines on my 240sx so designed these to hold the clamps in using a standard M6 bolt and rivnut on the firewall. made both the 4 Line clamp( closer to brake booster) and 3 Line clamp (other side of the…
I made an adapter to allow attachments for our Pado PureWave massager to fit our Toloco massage gun. The PureWave battery died and I tried to replace it, but broke it, so bought new massage gun. I like the big rubber massage attachment…
Welcome to our simple project! Screw-open Maracas – Customizable Sound Shaker (3D Printable) Discover the joy of sound experimentation with this 3D printable maracas that you can open, fill, and shake your way ! Designed as a two-part…
⚠Caution: Printing to fast could bypass the tightening strength. Stringing, layer shifts, or bad quality can make it hard to screw the lid on… Made by Optic.xyz ©Copyright 2024 All Rights Reserved
I added to the original awesome model: option to attach the hook with a 3-4mm diameter countersunk screw option to mount the hook perpendicularly to the lever split latch from the lever to two parts so that they are printable without…
this is a minimalistic version of the “toilet paper cloud”. Details for that see original model. This version adds rounded edges of the base and holes for screws. The original model was intended to use on flat surfaces with doublesided…
Mounting Plate for TP-Link TL-SG105 switch. Material: PLA+ Infill: 20% Support: Touching Buildplate
Print with supports in PETG. You can forego supports and test your printer's bridging. :) Mounts using a few smaller wood screws.
SHOWCASE Hello everyone, AnkleKris is back with my newest creation! Today, I present to you the Prusa Core One Universal Spool Holder — one that doesn’t discriminate against smaller diameter spools, like eSUN for example. It's simple,…
Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 300 Infill: 20 Filament: Prusament PETG Jet Black Notes: - Category: Computer
This cute and quick to print container combines mathematical precision with practical design, featuring a surface of interlocking hexagons that form a mesmerizing honeycomb pattern wrapping around the ovoid form. The two halves screw…
Eye Drop UD storage holder with screw-able cover for portability. THIS BY NO MEAN THAT YOU CAN STORE MOST UD EYE DROPS. please check with manual first, noting most UD can last for less than 6h after first usage but please check with…
A configurable motor mounting bracket/firewall for attaching electric motors to Remote Controlled aeroplanes and so on. It was designed to allow easy attachment using hot-glue, cable ties or fixing screws -- or all of the above if you're…
ESC cover for the Dart250G with intigrated antenna mount. Glue in the 3D printed nuts and you can remove it any time.
Just a little helper. I needed to screw a basic hook for a box, which i wanted to mount to the Skadis board, but i did not find a screwable one, so i made it. The OpenSCAD - file is attached, so you are able to customize the hook if…
This is designed to house a Firewalla Purple within 1RU in a 10-inch comms cabinet or minilab rack. There are no screws or anything required beyond what you use to bolt it into the rack, the Firewalla will press-fit into the cage and will…
A simple end cap to use after you've replaced the DWIN touch screen with a BTT touch screen . All existing end caps I found didn't fit very well. This one is simply printed and screws into place with the existing bolts. Print Settings…
Traced this out in FreeCAD from a flatbed printer scan (image included in photos), FreeCAD file is included for any alterations or changes. Unsure of if the bricknose trucks had these so labeling for 92-97 only for now. I started off with…
Schraubbarer Zangenhalter Screwable pliers holder
This LED Bracket holds a 12mm strip flat on the wall. I used 3,5 x 16mm SPAX PH2 screws to hold it in place on a wodden ceiling. Evenb with PLA you can screw them pretty tight to the wall. Print Settings Printer: Anycubic Kobra Rafts:…
Yet another version of the FT Elements Simple Firewall. This one prints quickly and assembles just like the laser-cut wooden original. Just add some CA glue and go crash something. Instructions I print using ABS at 100% infill. CA glue to…
4x M4 x 40 screws needed for the 6100 or 4100 firewall (optional) velcro tape for the powersupply (optional) c14 to c7 adapter v5.0 with enhanced stability v4.2 1st online release Print: front to print bed (look at the print 3mf)…
EN: Door stop that can be screwed on. | CZ: Zarážka do dveří, kterou je možné přišroubovat.
This is the Oval-shaped firewall boot / grommet for the Engine Control Harness used by the 4.0L AMC engine. Used by AMC Jeep Chrysler from 1984-1996. It was commonly found in the engine bay of the Jeep Cherokee Comanche XJ MJ. It is exact.
A 3D model of a joyful, smiling sun, perfect for 3D printing as a medal for children. This is a versatile award that will be great for any children's competition or event, regardless of the discipline! The Sun-Shine Medal will reward the…
Here's my interpretation of the radio from the game. Category: Games
Have used these at various times for our kids, usually to track good or bad habits with some sort of reward recognition at the end of the week The tokens slide into the slot as a visible marker of the behaviour. I've included blanks here…
Created a funnel which i can screw on top of the awesome descicant dryer
A 1U rack mount kit for Firewalla Gold / Gold Plus. There are 3 pieces to print Left: The main piece for Firewalla. This is a no-screw design and may require some sanding on the interlocking parts. It also may need supports. I shared a…
This simple stamp comes with the picture of a paw on a 26x26 mm plate and the handle of the stamp. Glue the 2 parts together and make sure to use the right ink that is fine on your kids skin. We use to reward our 2 year old for good…
Based off of my 92-97 OBS Ford F-Series Truck Firewall Clip . I wanted to mount an Evil Energy Oil Catch Can to my 1997 F-250HD 7.5L (old body style) but couldn't find a good place to mount it so decided to create a drop-in replacement…
Summary: This is handy kitchen organizer for on my door below the sink. The organizers are detacheble to clean them and make your own custom combination. Each model has a certain amount of ‘’tabs'' the full rail has 12 slots for these.…
I printed in PETG. PETG is flexible enough not to break when the cable tie is bent. For better results it's advisable to bend the cable tie when it is warm, for example directly after the print. Later you can heating it up with a…
a small low profile cableclip for 4mm cable with a screw hole for 3,5mm screws. printable in PLA, PLA+, PETG, etc.
A 10" rack mount for your firewalla gold
This simple stamp comes with the picture of a bear on a 26x26 mm plate and the handle of the stamp. Glue the 2 parts together and make sure to use the right ink that is fine on your kids skin. We use to reward our 2 year old for good…
This simple stamp comes with the picture of a kitten on a 26x26 mm plate and the handle of the stamp. Glue the 2 parts together and make sure to use the right ink that is fine on your kids skin. We use to reward our 2 year old for good…
You need to break this apart in your slicer to fit in the bed. I used CA glue to put this together once it was done printing! if you make it please Share!
This is designed to house a Firewalla Purple within 1RU in a 19-inch rack. This is a remix off the 10-inch design I previously made, but this allows for the wider rack option. The design has been cut so you can print this on any common…