Wyniki wyszukiwania: riser

Sortowanie

3841 modeli

P
PrintablesMaxx

Mini laptop stand/riser

This is a laptop stand/riser that's ultra portable and easy to print. Tested on Asus G14. Should work for most laptops. Print time about 1:30 h (for the pair) I've printed mine using PLA 0.25mm, 20% infill (default Prusa slicer profile…

Pobrania
2013
Polubienia
194
Ocena
4,76
P
PrintablesArchetrico

Prusament Upcycling - Laptop Riser

As mentioned in the title, it's a Laptop Riser! The hexagonal grid of the prusament spools makes very easy to attach some bolts and nuts to it. I was in need of a laptop riser that could release the neck pain of always looking down while…

Pobrania
955
Polubienia
649
Ocena
4,91
P
Printablesbiscuitless

28mm Combat Riser

This is a combat riser to be used with 28mm minis to show elevation differences between characters. It can go up to to 990 feet... even if you won't help your party too much while up there. It can be a bit top heavy, so I left room in the…

Pobrania
292
Polubienia
39
Ocena
4,5
P
Printableswilsgarc

PETLIBRO Granary Automatic Smart feeder riser stand

Riser stand for PetLibro Automatic pet feeder Made this for my pet cats automatic feeder after talking to vet, elevating to 5 inch feeding level will help in eating/digestion. Material: PLA Infill Pattern: Gyroid Infill : 5% Additional…

Pobrania
232
Polubienia
18
Ocena
5
P
PrintablesGizmo Goody

xTool P2 Riser Baseplate Slat Risers (Manual Passthrough)

Motivation I recently purchased a P2 Laser Cutter and Riser. One of the first cuts I needed to make was on a long piece of ¼” acrylic to be used as a window insert to which I would attach the exhaust duct from my inline fan. I currently…

Pobrania
142
Polubienia
32
Ocena
5
P
Printablesvoiyt

K1 Max Riser on Steroids - Modular Overhead Filament Box with 4 roll capacity with F3D for easy mods

I wanted the filament to share the same Cabin space as the printer, to maintain the same temperature and humidity since I found that it improves printing with certain materials. Also, it helps the filament move much better than from…

Pobrania
133
Polubienia
32
Ocena
5
P
PrintablesMatt Cooper

Google Nest Cam Indoor Wired Riser Stand

This is a riser stand for the Google Nest Cam (indoor, wired) https://store.google.com/product/nest_cam_indoor?hl=en-US Models for various heights are provided. If you print one of the taller sizes, you might want to use an infill for…

Pobrania
105
Polubienia
15
Ocena
0
P
Printables3DOM

Dell XPS 9700 (2020) Riser / Ventilation Feet (v3.0)

Introduction Dell XPS 9700 tends to get hot when gaming, wanted some easy to carry feet to improve air circulation when needed. This part elevates the back of the laptop by ~20° I am proud of this simple piece and would appreciate your…

Pobrania
58
Polubienia
11
Ocena
4
P
PrintablesLorenzo Fassina

Feet risers for microwave Candy EGO-G25DCS

These are some simple feet risers to rise your Candy EGO-G25DCS microwave oven. Print instructions Material PLA Resolution 150 Supports No Brim No

Pobrania
56
Polubienia
2
Ocena
0
P
PrintablesEmma85

Schreibtischaufsatz - Monitorerhöhung / desk mount - monitorstand (riser)

Habe diesen Fuß für das Regalbrett KONSTRUERA von IKEA (B x T - 57 cm x 28 cm) entworfen, um meinen Monitor höher zu stellen und meine Tastatur darunter verstauen zu können. Befestigt habe ich die Füße jeweils mit 3 Schnellbauschrauben…

Pobrania
42
Polubienia
7
Ocena
0
P
PrintablesPixel3D

Cup Riser for Sage/Breville Oracle Touch (for 1 or 2 cups)

Riser for the Sage / Breville (Oracle Touch) coffee machine. Suitable for 1 or 2 cups. Prevents the cups from not being properly positioned. Prevents spilling and coffee splashing. Assembly instructions After printing, place the two pins…

Pobrania
36
Polubienia
3
Ocena
0
P
PrintablesMilan Stehlík

maono AME2 riser

Tištěno z PLA, výplň 10%, bez podpěr.

Pobrania
34
Polubienia
0
Ocena
0
P
PrintablesMariusT

Slim Riser for Camera Mount for Prusa Mini to place besides Raspberry Enclosure

This is a neat little riser to be able to use the Prusa Mini Raspberry Pi Camera Mount from Seabird HH and the great and highly compact Prusa MINI Raspberry Pi Case from Joe. Normally these two parts cannot be placed besides each other.…

Pobrania
32
Polubienia
8
Ocena
0
P
Printablesodysseus31096

Corsair Xeneon Edge Monitor Riser for Cable Clearance

This riser is designed specifically for the Corsair Xeneon Edge monitor to provide additional clearance under the stand. The added height allows you to comfortably route cables — such as keyboard, mouse, USB‑C, or charging cables —…

Pobrania
30
Polubienia
4
Ocena
5
P
PrintablesJAnthony

Display riser on aluminum extrusion for INFI-20 Belt Printer

I developed a riser that connects to the aluminum extrusions that will allow for the housing of the display and control board to properly cool. The design from Sainsmart does not allow for proper cooling as the fan sits on top of the…

Pobrania
18
Polubienia
0
Ocena
0
P
PrintablesArtyL

Riser Feet for Bugaboo Stardust Playard

Fits around the bottom of the feet - it is a tight fit. I would recommend that you print just the top cup portion first to try and test fitment, since the entire print uses a lot of filament. Infill is printed at double line width for…

Pobrania
17
Polubienia
2
Ocena
0
P
PrintablesRC builder

Riser stand for darkOne tray with FrSky X12S TX

The tray riser prevents TX connector/cable damage during programming of FrSky 12XS with darkOne TX tray. As the tray original rear bottom supports are only glued to the base, there can be dimensional inaccuracy. The raiser left and right…

Pobrania
17
Polubienia
1
Ocena
0
P
PrintablesJesusFreak

Elegoo Centauri Carbon Vented Riser

Update 2 (8/22/25) It's here! Version 2.0 of the riser with tighter fitting vents that release easier and a tool hole to release the vents. I've also put in tabs to hold LED strips. Thanks to my fellow Elegoo Discord server members for…

Pobrania
39 829
Polubienia
2865
Ocena
4,91
P
PrintablesJoe Cooper

JC-Creality K1 Lid Riser

UPDATE: New rear Betweener! Creality K1 Lid Riser. I didn't really care for any of the other lid risers out there. They were frequently huge and had sharp angles that needed supports, so I set out to design a modular lid riser system. It…

Pobrania
12 836
Polubienia
801
Ocena
4,8
P
Printablesdkarjadi

BambuLab Top Glass Riser 4 COB LED Remix with LED Shield

UPDATE Sep 24 2023 Before you download and print this, I made a new version with VENT Holes, check it out > DK Riser And another version of a low profile riser >> DK Riser Low Profile A Remix of Daniel's Bambu Labs Carbon X1 Top Glass…

Pobrania
12 130
Polubienia
2505
Ocena
4,93
P
Printablesshadowandy

Creality K1/K1C/K1SE Hinged Lid Riser

This is the full kit to raise the Creality K1C lid to minimise/ eliminate the issue of cable chain bumping onto the lid when printing at the left edge (when viewing the Creality K1C from the front). It also eliminates the issue of…

Pobrania
11 242
Polubienia
842
Ocena
4,97
P
PrintablesJoe Cooper

JC-Creality K1 Hinged Lid Riser

Updates 2023-07-26 - Adjusted z-Height of Betweeners, all level with floor now. 2023-07-20 - Rear Betweener Added! Introducing the JC K1 Lid Riser now with hinges! Keep your lid attached and stop having to find a place for it when you get…

Pobrania
11 003
Polubienia
830
Ocena
4,97
P
PrintablesJustDeWitt3D

Elegoo Centauri Carbon Riser - Pre-Arranged Plate

This remix arranges the eight parts of the Elegoo Centauri Carbon Riser (originally STEP files) into a single print plate for easy printing. The STL file contains the pre-arranged layout. (Note: The STL may import as a single mesh in some…

Pobrania
10 121
Polubienia
702
Ocena
4,84
P
PrintablesMeyui

iPhone Stand – Onami Riser

Inspired by the energy of waves and the elegance of natural rhythm, this sculptural phone stand merges functional balance with fluid aesthetics . Part of the Meyui Onami series , this piece explores how motion and stillness can coexist in…

Pobrania
9794
Polubienia
1652
Ocena
4,62
P
PrintablesFred Boisselier

Creality K1 - K1 Max Riser

This riser don't need any screw or other to be fixed. Once the 4 corner installed, put the bar. All will be firmly fixed on the printer Lot of people asked me to create a K1 version. With help of @Smaug_353550 , i made it. /!\ - i don't…

Pobrania
9662
Polubienia
720
Ocena
4,82

New v3.0 of top riser set for Flashforge Adventurer 5M (AD5M) Minimal DIY Enclosure - prints faster, uses less plastic - and more

How to use the 'All Files' choice "Download All Files" gets everything — including the .3mf file — named " ad5m-minimal-enclosure-by-design8studio-for-orcaslicer-230.3mf " — which is an OrcaSlicer project file , containing multiple print…

Pobrania
7567
Polubienia
796
Ocena
4,96
P
PrintablesFatTony

V2 Vented Remix - Updated Bambu Lab Ultimate P1P P1S X1-C Riser+AMS Stand - Community Build!

Simple remix that adds ledges half way up the riser so the glass will slide in on top of for easy ventilation when printing PLA. Add LED lighting or stick cheap under cabinet lights to the bottom of the AMS for a simple lighting solution.…

Pobrania
7372
Polubienia
1359
Ocena
4,89
P
PrintablesBlenderBender

Creality K1 / K1C Unibody Riser Frame

I love the design of the Creality K1 printers. The unibody frame with the beveled edges and corners is just awesome. There are already a lot of risers for this printer out there, but this one extends the original frame of the K1 / K1C.…

Pobrania
6572
Polubienia
930
Ocena
4,93
P
Printablesdkarjadi

DK Riser for Bambu Lab X1/P1

When I made / remixed my first Riser, it was out of personal necessity… because the built-in LED in BambuLab was not sufficient… and that low profile design turned out to be quite popular. Since then, a couple of users Qiao112 and Dan…

Pobrania
5863
Polubienia
1330
Ocena
4,97
P
PrintablesWay2Do

Creality K1, Nu-K Riser

This is a riser for the Creality K1, inspired by the speed and noise of the K1, I decided to call it Nu-K. The riser is printer upright and with tree support for the grids. The grids for the ventilation are with M3 screws and 12mm large.…

Pobrania
5639
Polubienia
397
Ocena
4,94
P
PrintablesJan

Creality K1/K1 Max/K1C bed levelling risers/shims

UPDATE: Added 1.1 and 1.2mm shims UPDATE: New version with markings. It doesn't require to destroy the top level of bed to install, like some modifications i've seen before. It's designed, so you can put it from the side and rotate into…

Pobrania
5569
Polubienia
482
Ocena
5
P
PrintablesViniS

Creality K1/K1 Max Chain Link Riser Extended

If you like my work, don't hesitate to support me by paying me a ☕. Thank you 🙂 https://ko-fi.com/vinis

Pobrania
5074
Polubienia
291
Ocena
4,89
P
PrintablesDutchWorkX3D

X3D-v3 Riser | Bambu Lab X1/P1 AMS Stand

I designed v3 from scratch based on the v2 version. It now has more strength and more place for honeycomb / hex add-ons. I have added: Honeycomb / Hex Ledstrip holder Honeycomb / Hex Build plate holder Honeycomb / Hex Top glass holder I…

Pobrania
4525
Polubienia
1390
Ocena
4,86
P
PrintablesJU

Elegoo Centauri Carbon Low Riser Remix

I am space limited due to a shelf above the Centauri and I plan to use it primarily for ABS / ASA prints so I used Prusa Slicer to chop off the vents but retained the angled shelf to add in led light strips. The Centauri Carbon is dark…

Pobrania
4461
Polubienia
337
Ocena
4,82
P
PrintablesSprintech

K1 Series - Riser V2

Instructions can be found in the folder of this project (Other Files). Versions of the Riser: K1 Series - Riser V1 K1 Series - Riser V2 Add-on for the Riser K1 Series Chain Riser K1 Series Spool Holder for Riser Important: This model has…

Pobrania
4460
Polubienia
519
Ocena
4,83
P
PrintablesCcraft3d

V2 NEW - ELEGOO CENTAURI CARBON Sliding riser With PTFE tube relocation

NO MORE kinked tubes, broken filament or issues loading or unloading. This is a NEW version of my other riser that now has an incorporated slot to relocate the PTFE tube through the riser! Also has a larger relief on the back corner to…

Pobrania
4355
Polubienia
514
Ocena
4,53
P
PrintablesBlenderBender

Creality K1 / K1C Unibody Riser Hexagon Plates

Hexagon plates for K1/K1C Unibody Riser Frame . It is a two parts print that should be gluwed together. The plate has clips so you do not need to glue it onto the Unibody Ricer frame. Update 2024-09-28 : I made it easier for you to create…

Pobrania
4268
Polubienia
430
Ocena
4,88
P
Printableskrazyderek

Bambu Lab X1 - top glass lid cover riser holder shim air vent

Mirror both parts for a set of four. Print out of ASA or other material that will resist higher temperatures as needed. Can be easily modified by updating variables in onshape model. leg_length_a 60 (min: 20mm more contact area on glass…

Pobrania
3935
Polubienia
449
Ocena
4,91
P
PrintablesDaniel

Bambu Labs Carbon X1 Top Glass Riser for LED's

Minimalist top glass riser. PETG. (Overture PETG Black). Nothing special. Just basically used stock settings on Bambu to print this!! :D No supports necessary. Supports 8 or 10mm LED strips that stick to the inner sides. Has a 4.25mm hole…

Pobrania
3686
Polubienia
590
Ocena
4,84
P
PrintablesRobertCowanDIY

Creality K1 Max Lid Riser - No logo, slimmer vents

Lid raisers for the K1 Max help improve the clearance between the drag chain / filament tube and the glass top as Creality have designed it very very tight. The vents allow you to help prevent the temperature becoming too high inside the…

Pobrania
3184
Polubienia
199
Ocena
4,85
P
PrintablesWay2Do

Nu-K and D-Riser corners

This is the first one you need to print to use the riser mod. There are two different mods, one completely closed and the other with adjustable grids. To print it you can put all the corners together, no supports are needed. The…

Pobrania
2982
Polubienia
71
Ocena
4,88
P
PrintablesJLarkEE

Kobra S1 Ace Pro Riser

This is a riser for the Ace Pro for the Kobra S1. It Allows you to take the top cover off without needing a third hand. It also has drawers and hex walls on the side for as many optional tool/filament holders that you can think of.…

Pobrania
2967
Polubienia
255
Ocena
5
P
PrintablesBlenderBender

Creality K1 / K1C Unibody Riser Hinges

Hinges option for Creality K1 / K1C Unibody Riser https://www.printables.com/model/891616-creality-k1-k1c-unibody-riser Uodate 2024-10-20: Redesigned hinges for new version of the frame. Update 2023-07-14: I have updated this model.…

Pobrania
2838
Polubienia
306
Ocena
4,45
P
PrintablesStranula

K2 Plus - CFS Riser, Ventilation, and Storage

Update 2025.02.06 Some people have reported that when they printed, the tolerances were too tight for their printer to handle. The original, now called “Tight”, version has tolerances of 0.14 mm. There is now also a “looser” version that…

Pobrania
2755
Polubienia
371
Ocena
5
P
PrintablesJulien Mairy

Elegoo Centauri Carbon 1 CANVAS Top Cover Riser

🇬🇧 Description This model has been designed to allow the use of the CANVAS system on the Centauri Carbon 1 , while keeping the printer fully enclosed using the original top glass. The riser lifts the lid to provide clearance for the PTFE…

Pobrania
2680
Polubienia
499
Ocena
4,85
P
PrintablesStudio 507

QiDi Q2 Riser

Riser with vent for the QiDi Q2, this is found on the QiDi Wiki page, but I am uploading it here so it is easier to find. Prints easy, I used .2 LH and the “.2 strong” setting. I use automatic, normal supports with the stock settings set…

Pobrania
2675
Polubienia
232
Ocena
5
P
Printablesterenceang

Creality K1 Riser

K1 Riser to prevent the reverse Bowden tube from scraping on the cover. I made 2 versions, short version with open vents; some users prefer this for PLA printing. Enclosed version for printing ABS / ASA For the short version, you will…

Pobrania
2675
Polubienia
229
Ocena
4,83
P
PrintablesAXIOM Prints

Creality K1 and K1C Lid Riser 16mm-22mm

22.02.24 - Added corner K1C logo 28.11.23 - Added ventilation grille (2 versions) for the 22mm version is printed without support in one model, nothing needs to be assembled (Disassembled model for if you want to assemble from 2 different…

Pobrania
2427
Polubienia
179
Ocena
4,89
P
PrintablesAlex Y

K1 MAX Riser with hinges and guider

This riser, combined with the guider included, gives better TPU printing, much better, and no sharp turnings, PTFE tube path, which means more reliable printing of filaments with CF. The tube will not touch the lid, and it comes from the…

Pobrania
2422
Polubienia
309
Ocena
4,94
P

Creality K1 Riser

I Realized this write up / description is very weak…. and that picture isnt showing the full size, so heres a link of that big settings on imgur… creality k1 riser by digital, print settings - Imgur , from there you can download and open…

Pobrania
2317
Polubienia
420
Ocena
4,83
P
PrintablesDaniel

Laptop Riser

Elevate your laptop and your work experience! The laptop riser tilts your keyboard towards you to be more comfortable and ergonomic. The riser also elevates the display of your laptop, bringing it closer to eye-level to help reduce neck…

Pobrania
2311
Polubienia
252
Ocena
4,9
P
PrintablesLucio Badtaste

K1(C-Max) Bowden Tube Guide for Nu-K Riser (et similia)

I liked a lot the original print but I wanted the tube at the same height of the hole in the back of the lid riser (in my case the Nu-K that has it placed ~20mm higher than the chain). I suppose that it should fit on the K1 Max cablechain…

Pobrania
2208
Polubienia
259
Ocena
5
P
PrintablesHotend

Customisable Display Shelf Riser

This is an OpenSCAD model that is designed to be used with OpenSCAD's customizer facility. Width, depth, height, thickness and corner radius are all fully customisable using OpenSCAD's customizer facility. See: openscad.org for more…

Pobrania
2108
Polubienia
242
Ocena
5
P
PrintablesThePrintCoder

Picatinny Rail Riser 20mm with M5/M3 Slot

This is a remix of Picatinny Rail Riser 20mm by DNeves . An airsoft Picatinny rail riser to set accessories such as red dots and scopes 20mm higher. Remixed to fix rail width and include M3/M5 slots. The original model had a great design,…

Pobrania
2025
Polubienia
260
Ocena
4,67
P
PrintablesJovan

Bambu Lab X1 / P1 / X1C Riser with Storage Drawers, Build Plate Holders, and poop drawer

I needed storage for my X1C. I also didn't like having the poop bucket behind it. This build directs the poop into a large drawer. There are also 2 other drawers with a tray and dedicated space for your hot ends. The recommended way to…

Pobrania
1995
Polubienia
703
Ocena
4,86
P
PrintablesSyntactics

Qidi Q1 Pro Riser

Like many other users of this printer, I also did not want to scratch my top clear panel with the ptfe tube while printing. This model is designed for a newer revision of the Q1 Pro (The one with the bed endstops) since I believe the…

Pobrania
1959
Polubienia
240
Ocena
4,93
P
PrintablesMolodos

Miniature riser (DnD, Warhammer, flying, display)

A support-free simple yet cool looking miniature riser for DnD, warhammer, flying creatures or just for displaying minis Features Printable without supports Beautiful chain texture Sizes for different common miniature base diameters (let…

Pobrania
1873
Polubienia
554
Ocena
5
P
Printables3D-Druckbude

Elegoo Centauri Carbon: Yet another but sturdy riser

Hallo liebe 3D-Druckfreunde und Centauri Carbon Fans! Bei meinem Elegoo Centauri Carbon wollte ich mehr Platz zwischen Druckkopf und Glasabdeckung bekommen. Die im Internet kursierenden Erhöhungen waren mir ein wenig zu niedrig, kosteten…

Pobrania
1846
Polubienia
322
Ocena
5
P
PrintablesDesignCraft

AMS Lid Riser for Bambu Lab AMS and AMS2 Pro

The AMS Lid Riser allows you to keep your AMS lid closed while providing additional clearance for larger filament spools. Need even more spool clearance? The AMS Lid Riser XL is now available! AMS 2 Pro Lid Riser and Original AMS Lid…

Pobrania
1806
Polubienia
274
Ocena
4,94
P
Printables3D Print Stuff

Elegoo Centauri Carbon - Top Plate Riser

Sliced using Elegoo Slicer 1.1.7.3 Printed in PETG, prints in 4 parts. Used to print CF filaments on the Centauri Carbon. The factory path for the PTFE tube creates tight bends that snap the filament. Removing the tube form the drag chain…

Pobrania
1748
Polubienia
163
Ocena
5
P
PrintablesSteven

Laptop Riser

Laptop riser mounts designed to help increase airflow of a laptop. Able to be used with the screen open or closed. Small and easy to store for on the go. Print instructions Easy to print. Increase instances to QTY 2. Printer: i3 MK3…

Pobrania
1660
Polubienia
192
Ocena
4,65
P
PrintablesNoizie Works

Creality K1 riser The Speedbump closed and ventilated

Riser that makes room for the canbus chain to move in a safe way instead of bunching up in the corner with the chance it unlocks the extruder (it happend twice) Both ventilated and closed models for download Supports are needed for all…

Pobrania
1622
Polubienia
155
Ocena
5
P
PrintablesAubrey Barago

Carbon Centauri Riser and Storage Upgrade

The original was slightly modified and the storage compartment was added on top. It is designed to hold various tools, printing plate(s) and stash the glass cover higher when necessary, especially when printing with PLA. This design was…

Pobrania
1609
Polubienia
494
Ocena
4,4
P
PrintablesFrikarte3D

K1 Cable Chain Anti-Sag Riser Back (for ViniS Cable Chain Fix)

Introducing the K1 Cable Chain Anti-Sag Riser Back — a specially modified Chain Link Riser Back component, designed to perfectly fit with the Creality K1 Cable Chain Sagging Fix by ViniS . This riser offers an improved solution to the…

Pobrania
1551
Polubienia
113
Ocena
5
P
PrintablesDutchWorkX3D

X3D-v2 Riser | Bambu Lab X1/P1 AMS Stand

Hexified version of the Bambu Lab AMS Riser, with option to raise the glass as shelf to let heat out. I get a lot of requests and I don't mind following up on them as it makes these projects more interesting, although it takes a lot of…

Pobrania
1542
Polubienia
419
Ocena
4,88
P

Picatinny Rail Riser

Picatinny Rail Risers in 13mm, 19mm, and 25mm. prints in orientation as provided without supports (standing on end) bolt hole is covered by a thin membrane to improve print quality, must be drilled out post-process PETG recommended as…

Pobrania
1526
Polubienia
192
Ocena
4,92
P
Printablesresimkulubu

Creality K1 / K1C Unibody Riser Remix

Umarım beğenirsiniz, yorumlarınızı ve silinenlerinizi paylaşmayı unutmayın lütfen :)

Pobrania
1521
Polubienia
199
Ocena
3
P
Printablesspengineer

Bike Trainer Front Wheel Riser

Riser block for front wheel when using an indoor bike trainer. Raises the front wheel 20mm. Should be fine for any road or hybrid bike, but won't fit mountain bike tires. Will probably work printed with a larger layer height or lower…

Pobrania
1439
Polubienia
101
Ocena
4,92

K1 Max Lid Riser - 45mm (Vented)

What this project aims to solve: 1) The Lid of the Creality K1 Max 3D Printer sits a bit too low. The extruder filament feed constantly rubs on the glass during prints. Some people report getting a filament feed error due to the tight…

Pobrania
1412
Polubienia
108
Ocena
5
P
PrintablesStranula

K2 Plus - CSF Riser - Drawer Options

You can find the main body here: https://www.printables.com/model/1093082-k2-plus-cfs-riser-ventilation-and-storage/ Here you will find different variations of the drawers for the CFS riser. You will need to print 2x Drawer I want to…

Pobrania
1401
Polubienia
90
Ocena
5
P
Printableswanderyr

Slightly Taller Qidi Q2 Riser

An issue with the Qidi Q2 is that the internal PTFE filament tube rubs against the underside of the glass lid. Even worse, it scrapes across the screw heads which hold the lid's handle in place. A common solution is to print a riser for…

Pobrania
1385
Polubienia
133
Ocena
5
P

Monitor Riser/ Stand

// Monitor Riser/Stand //Dimensions: The stand is meant for a 7.25 in. x 0.75 in. board. Should be easy to modify. They are 1.5 inches thick , and their thickness can be easily adjusted if needed. 4.25 inches tall in total. 3.245 inches…

Pobrania
1370
Polubienia
1026
Ocena
5
P
PrintablesAL ExtremeError

Elegoo Centauri Carbon Canvas Relocation & Riser, LED Light Strip Ready

================================================== ELEGOO CENTAURI CARBON - TOP PLATE RISER & CANVAS DOCK SYSTEM ================================================== 📝 Overview & Core Details Description: A custom riser that lowers the…

Pobrania
1338
Polubienia
313
Ocena
4,77
P
Printablesgltovar

Elegoo Saturn 2 + 3 ultra Riser

It has arrived! If you needed a riser for an Elegoo Saturn 2 this project has you covered. It included a step file of the dimensions of the cover rim, step and stl files of a 25mm tall riser, and a link to the project where you can modify…

Pobrania
1310
Polubienia
135
Ocena
4,88
P
Printablesdkarjadi

DK RISER LOW PROFILE For Bambu LAB X1/P1

This is an update to my previous riser I also made one a taller one with Vent and Door , this time I want to improve on the first one Basically all the improvements I did for the Tall one in a low profile, thus without the vent holes… but…

Pobrania
1301
Polubienia
215
Ocena
4,86
P
PrintablesStranula

K2 Plus - CFS Riser - Side Panel Packs

You can find the main body here: https://www.printables.com/model/1093082-k2-plus-cfs-riser-ventilation-and-storage/ Here you will find different variations of the side and back panels for the CFS riser. You will need to print 3x Left…

Pobrania
1293
Polubienia
120
Ocena
5
P
PrintablesArs Moriendi 3D

Mythic Mug Insert - Dice Box Can Riser - Wooden

Fill the dice box with your favorite dice while travelling and use it as a can riser in your Mythic Mug to have your beverage sitting at its' correct height. Use it for example with the free Merchant's Mug:…

Pobrania
1289
Polubienia
229
Ocena
5
P
PrintablesRockChewer

V2 Update Bambu Lab Ultimate P1P X1-C Riser+AMS Stand - Community Build!

Made some major changes in V2 with suggestions from @MediaMan3D. The focus here was to eliminate plastic from the sides, have the front weight load of the AMS rest on the front corners versus relying on a bow joint, and added some wire…

Pobrania
1286
Polubienia
365
Ocena
5
P
Printablesmowcius

Bambu Lab AMS Riser Feet (16mm)

This is a simple model designed for Tiberius (https://www.printables.com/social/289733-tiberius) in order to give a gap of 16mm under the AMS unit in order to fit in additional LED lighting for illumination of the printer build chamber.…

Pobrania
1250
Polubienia
197
Ocena
4,96

Manga Bookshelf Riser

This bookshelf riser will help you see the books or manga that are behind others

Pobrania
1235
Polubienia
108
Ocena
5
P
PrintablesHyperPrints

Qidi Q1 Pro Lid Riser, Styled

I've used some of the other risers, but they didn't flow with the Q1 aesthetic. So I rounded things out a bit and made it snap-together. The corner pieces have built in support for printing. You will need 2 of each corner and 4 of the…

Pobrania
1228
Polubienia
150
Ocena
4,25

FlashForge Adventurer 5M HSW Risers

Overview Honeycomb Storage Wall has been added to the side of my existing Adventurer 5M Clean Riser Set . Mix and match them for a truly unique look. The adjustable angle on the screen has been removed to attach the screen much more…

Pobrania
1226
Polubienia
403
Ocena
5
P
PrintablesTom Hoeppner

Riser for Elegoo Centauri Carbon (ECC1) with Canvas

EDIT - UPDATE 15 August 2026 Based on some feedback, I've replaced the 3MF file with one that contains better plate labels and support blockers / enforcers. The original 3MF file has been removed to avoid confusion. There is a solid…

Pobrania
1215
Polubienia
280
Ocena
4,92
P
PrintablesShonuff

Kallax Book Riser

I didn't need all of the structural integrity that the original had built in, so I updated this to get rid of one of the legs and remove the t-join. The result is that you only need supports to the build plate for the bottom model. I…

Pobrania
1209
Polubienia
309
Ocena
5

Elegoo Centauri Carbon Riser Rolling Shutters - V1.1 update!

Don't let the number of files intimidate you, you'll only needs a fraction of them - continue reading and you'll see why there's that many ;) A riser with rolling shutters. It'll provide the best possible airflow while remaining as…

Pobrania
1204
Polubienia
330
Ocena
4,92
P
PrintablesDuckMeat

Bambu X1/P1S Chamber LED Riser Upgrade (Reinforced)

Full credit to dkarjadi for his original design which can be found here . What is it? This model is an upgraded chamber light to "assist" the wimpy one that comes with the Bambu X1/X1 Carbon and the P1S. Printed in grey ASA, gaskets in…

Pobrania
1198
Polubienia
255
Ocena
4,95
P
Printablesdumskillz

Creality K1 Max Riser - Improved Filament Path, K1 added

Modified riser that provides a much cleaner and pinch free route for the filament, especially if printing from a dryer/drybox. Two options. A simpler one with the tube mostly floating and one with an arm that provides support to the tube…

Pobrania
1193
Polubienia
184
Ocena
4,83
P
PrintablesJohnJacky

FLSUN V400 Upper Plate Risers

You will need : 6 screws M3x15mm Double-sided tape or Glue PTFE Tube 9cm

Pobrania
1189
Polubienia
122
Ocena
4,64
P
PrintablesCRracer712

Flashforge Adventurer 5M Pro Lid Riser

I've remixed this from the original one-piece model I found and sectioned into 4 pieces, 2 pieces per plate, this lid riser for the Flashforge Adventurer 5M Pro. Without the riser, the filament tube rubs on the clear plastic lid. I had…

Pobrania
1185
Polubienia
146
Ocena
4,63
P
PrintablesStranula

K2 Plus - CFS Riser - Gridfinity Parts

You can find the main body here: https://www.printables.com/model/1093082-k2-plus-cfs-riser-ventilation-and-storage/ Here you will find the baseplate, large bin, and variations of options for the smaller gridfinity bins for the CFS riser.…

Pobrania
1181
Polubienia
123
Ocena
5
P
PrintablesEvan Dorsky

35mm Film Carrier for Full Border DSLR Scanning + Riser Kit for CS-LITE Light Source

This film carrier provides great film flatness and smooth film feeding action while being quick to print and easy to assemble. This design is my attempt to improve on existing 3D printed film carrier designs, focusing on film flatness and…

Pobrania
1177
Polubienia
181
Ocena
5
P
PrintablesMark Meadows

Creality K1 Hinged Riser with Chain Recess

I really liked the idea of the speedbump and hinged riser by these contributors listed below so I combined them to make them into one. Added 10mm height to the original parts and made ventilated and non-ventilated side pieces. Back plate…

Pobrania
1171
Polubienia
176
Ocena
4,2
P
PrintablesNadroJ

Centauri Carbon Riser Light Rail MOD

This is a light clip rail mod for Jesus freaks vented riser mod for the centauri carbon. I have 4 light clip vents included. I printed this in Twinkling Black PLA INFILL 15% INFILL PATTERN Gyroid. It is ultimately up to you and what you…

Pobrania
1166
Polubienia
228
Ocena
5
P
Printablesthaessler

Elegoo Centauri Carbon LED Riser

This riser or low profile extended top for the Centauri Carbon is designed to match the outer perimeter of the machine unlike all the existing variations I found that sit inside the top glass recessed area and give a chimney effect. Just…

Pobrania
1144
Polubienia
220
Ocena
5
P
PrintablesJes3se

Playing Card Holder/ riser 3 Tiers

Card holder for small hands or full hands. Print and let this hold your cards if you are unable, or if your hands are full of wine and cheese, beer and pizza rolls, etc.

Pobrania
1142
Polubienia
394
Ocena
4,75
P
Printablestlamp

Creality K1 and K1 Max Chain Riser V2

MAJOR UPDATE V2 - 1/23/25 Made overall dimensions smaller Added notch for stability with built in support, options for booty and stock gantry Added more sizes (8, 10, 12, 14mm) Changed required bolt size to 8mm for all sizes BOM: One 8mm…

Pobrania
1119
Polubienia
136
Ocena
5
P
PrintablesGamingFaxe

Bambu Lab X1C and X1E Top Glass Riser - PIP - NO TPU

Hey :) I remixed the “ Bambu Labs Carbon X1 Top Glass Riser for LED's ” Now you can print it without TPU and it works better, we made some updates to the file! 1. 2x 3h printing time - 2 parts fit on the X1C. 2. no TPU needed anymore…

Pobrania
1119
Polubienia
200
Ocena
4,87
P
PrintablesZef

Furniture / table leg riser / height extender

I needed the height of a piece of furniture to be raised so that the power point behind it was still accessible. I printed 4 of these and used them to gain lift of about 36mm. The dimensions of the print are 40mm x 40mm with a 4mm deep…

Pobrania
1116
Polubienia
99
Ocena
4,67
P
Printables3DPHUB.NET

DXC2 Riser For Creality K2 Plus

Required for the DXC2 Extruder

Pobrania
1113
Polubienia
49
Ocena
0

K1C Lid Riser

Just a simple remix of the lid riser, I dont print PLA or PETG so I prefer a solid riser as I want to reduce heat leakage as much as possible, I also reduced the gap at the rear and put the K1C logo on the left. Print with supports for…

Pobrania
1099
Polubienia
101
Ocena
5