Wyniki wyszukiwania: roni

Lamp Bulb Idea Electronic Circuit wall art

Try printing at 80% of speed and very hot bed (75° ?) Best R

Spudger Set (Electronic Disassembly Tools)

Following a discussion I had with @ThatMakerKid, I wanted to create my own set of 3d printed spudger tools inspired by the iFixit spudger designs but with a geometry better suited for FDM printing. I decided to create 3 models to achieve…

Precision Tweezers (Electronics & Clockwork)

A printable copy of the tweezers used by clockmakers or electronicians. Clip each “blade” in the support and it's ready. Print Settings : Printed on MK3S Filament tested : PLA Nozzle 0.4mm : 0.15mm tested

Prusa MINI Z-Top | Electronics Box Lid

Prusa MINI/MINI+ ‘Z-TOP’ The Z-Top is an alternative lid design for the electronics box enclosure, which attaches seamlessly to your Prusa MINI or MINI+. The Z-Top connects at the base of the z-axis and replaces the lid of the stock…

Electronic Dice

Recommended layer height 0.15mm - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 09/05/2022 Electric dice REV1 d6 layout correction

Voroni Cat

Voroni Cat Hey maker! 👋 I created a simple cat model and applied a Voronoi pattern – lots of fun! Features: Stylish Voronoi design for a unique look. Perfect for display, desk decor, or as a small gift. Printing Tips: PLA or PETG…

Electronics Sorter Box with IKEA SKADIS mount

This is a remix of Vasilas' resistor storage drawers. https://www.printables.com/model/25285-resistor-storage-drawers I've added a box that fits my needs better: Now there are stoppers, so the drawers don't fall out and I also added a…

Veronica : 6th Station of the Cross

Veronica : 6th Station of the Cross calvary in Retz, Lower Austria. Made in 1727

Voroni Rabbit

Voroni Rabbit Hey maker! 👋 I took a rabbit model and applied a Voronoi pattern – lots of fun! Features: Unique Voronoi design for a stylish look. Perfect as a desk decoration, gift, or display piece. Printing Tips: PLA or PETG recommended…

Skadis - Knipex Pliers - Electronic Super Knips

Small mount for holding Knipex Super Knips pliers on the IKEA Skadis. Easy printing. Support recommended.

Prying Tools for Electronics (Spudgers)

Safely pry into electronics for repairs and service. You're likely to damage these prints before you damage your devices, but of course exercise caution why prying into expensive things and always make sure they're turned off before you…

Ass Up Chronicles.

Small-Parts organizer box (Electronics, screws etc.)

Build instructions You can either slice it yourself or used gcode that I uploaded. Have in mind that every printer is different hence has different optimal print settings. Printing labels I uploaded a DWG file with properly sized labels…

Motion Follow Eye Animatronics

Motion Follow Eye Animatronics. This Arduino project uses an Optical Flow Sensor (ADNS3080) to capture movement. Then translate the data to move servo's making it look as eyes are following moving object. full project:…

Mini portable electronics workshop

Various layouts to organize components and tools to keep everything close by so you can make repairs without leaving the table Print instructions Un pequeño taller para poder trabajar en el salón de tu casa sin quemar nada y teniendo…

Monotonic infill & ironing test

Monotonic infill & ironing test Testfile for the new features of Prusaslicer 2.3.0 alpha 1 https://github.com/prusa3d/PrusaSlicer/releases/tag/version_2.3.0-alpha1 Print instructions gcode 1: monotonic infill test gcode 2: monotonic…

Raspberry Pi 1/2/3/3b/4/4b/Zero/2/W Standoff for electronics placement

A lot of the time, I find myself needing to place a raspberry pi on a surface, but still need easy access to remove often. I designed these standoffs to be superglued in the correct locations, and then you can keep placing and removing…

Pimoroni Pico Display pack 2.0 Case

I wanted to print a Case for my Pimoroni Pico Display pack 2.0. and couldn't find one that suited so I created my own. The case has a snapfit shell, buttons, led hole, and usb cable cutout. 14/06 I've added 2 additional experimental…

ECM Synchronika Drain Pan Upgrade (Modified)

A modification of jmbinette's ECM Synchronika Drain Pan upgrade ( link ), which is itself a major upgrade of the drain pan provided by ECM. This variation is sized slightly smaller in the corners to make it printable on a Prusa Mini, and…

CAA Micro Roni Gen4 Bump Stock Extender 50mm

🔫 Introducing the Bump Stock Extension for Micro Roni Gen4 by Veracon Engineering! Enhance the stability and control of your Micro Roni Gen4 with our custom-designed Bump Stock Extension. Engineered for precision and compatibility, this…

The vernier caliper: a new lease of life for defective electronic calipers

Converting a broken electronic caliper to a vernier caliper A few years back I bought a cheap caliper of the Aldi "Workzone" brand. This particular unit consumed batteries faster than I consume chocolate, and one day I found that the unit…

Voroni Chaotic Penholder

Voroni Chaotic Penholder Hey maker! 👋 I started with a chaotic vase and modified it to apply a Voronoi pattern – the result looks pretty awesome! 😄 Features: Unique chaotic Voronoi design for your desk or workspace. Perfect for holding…

HSW Klein Electronic Level Holder

I love the Honeycomb Storage Wall by @RostaP enough to now have a 30-panel wall in my workroom - covering 108cm x 111cm (nearly 4 feet x 4 feet)! All of the outer panels have a solid frame thanks to the fabulous Honeycomb storage wall…

TOPEX Vice Jaws for electronics

Print instructions: I recommend printing from PETG. To strengthen the area around the nuts, I adjusted the print using modifiers. Please see the attached 3MF file for detailed print settings. Supports are necessary. Parts list: Printed…

Additionnal parts for Train car for OS-Railways done by Depronized

I designed an axle and bearing to be able to mount the wheels and interface with the bogie sides. I also designed a connecting rod to attach the bogie centre hub with the bogie frame. To mount the wheel on the axle you need to local sand…

Measuring spoon 1 ml with voronoi pattern / Odměrná lžička 1 ml s voroni vzorem

I use it for vitamin C dosage. 1 spoon = 1000 mg Používám ji na dávkování vitamínu C. 1 lžička = 1000 mg Note: If you like this model (which is not behind a paywall) you can buy me a coffee.

Electronic Tape Measure for Component Reels

This is a bracket that fits a $20 electronic tape measure from Amazon. This bracket holds 8mm wide component tape. I highly suggest using "snug" supports at 0.2mm contact distance, and use top surface ironing for best fit. Search amazon…

TaoTronics-Ultrasonic-Cool-Mist-Humidifier Replacement Duct

Why I needed a replacement for the Duct / Nozzle on the top of my TaoTronics-Ultrasonic-Cool-Mist-Humidifier . The Duct does not lock in place but just sits inside a pocket on the top of the humidifier. Because of this deign mine fell out…

2.8 inch Pimoroni Pico display case - with 4 buttons

I bought one of these 2.8inch LCD displays ( https://shop.pimoroni.com/products/pico-display-pack-2-8?variant=42047194005587 ) to use with a Pico W as I wanted a small, but capable bit of screen space to show some stats etc. It just plugs…

Protective feet for g.e. Ironing Board Vileda (~18.3 mm)

Semi oval shape protective feet for e.g. ironing board. Pipe dimention ~18.3 mm . Angled wall so it catch it good. Big stand area but also big angled stand area (wider). I have printed in draft mode for speed. Change to more precise if…

VOLTa221 – Modular Educational Electronics Kit (WAGO 221 Based)

[ENG] VOLTa221 is an innovative open-source kit that combines accessibility, flexibility, and hands-on learning. Each module can be 3D printed and equipped with WAGO 221 connectors, enabling quick and reliable wiring without soldering.…

Ender 5 Klipper Electronics Case

NOTE: In order to use this electronics case, you'll have to have mounted your Ender 5's original electronics enclosure to the rear or your machine or otherwise relocated its contents into a custom solution. For those interested, something…

Electronic Box

The design is made to hold a small, printed circuit board. It was needed to mount a full-wave rectifier attached to a doorbell transformer. The bottom holds the circuit board and the top covers it. There is a hole in the top for an LED…

Electronic magnifier for people having low visual capacities (AMD, ...)

This is a magnifier based on a webcam and a tablet. You need: A tablet (only tested on Android) A webcam “Razer Kiyo” or “Angetube Webcam 967” An OTG adapter to connect the webcam to the tablet A photo camera screw (0.25" / 20tpi) 15mm…

WPL B16 electronics plate

With this plate you can neatly hold all your electronics (maybe, I don't know what you got) and you can mount a power switch. It fits neatly and the cabin can still be screwed to the frame as usual. It sits on top of the old thingy that…

Jeep Cherokee Trailhawk Electronics Cover

There is a hole to the left of the trailer hitch on the Jeep Cherokee Trailhawk meant for electronic things. If you don't have those things, you can use this to cover that up (could also hide something in it turning it into a “secret…

Key dummy for electronic locks | Schlüsseldummy für elektronische Schließanlage

If you have a eletronic lock system of a well known german Manufacturer, you can open unchecked (coded red) door locks from inside. This is not an error but a known function. So you do not need the original key to lock and open your…

Kraft Macaroni Single Serving Size Bowl & Lid

3d model of a Kraft brand Macaroni microwave dinner bowl, and a 3d printable lid that snap fits to the bowl. Intended to support waste reuse.

Tronic charger wall holder

Simple wall holder for Ni-MH / Ni-Cd charger Tronic (Lidl) TAL 1000 A2. You need two pcs.

Remix of JKTech's Updated Enclosure Electronics - V2

I previously built my own version of JKTech's printer enclosure using MDF instead of aluminum extrusions, so I had to modify this to fit my enclosure. I adapted the main body so I could screw it directly to my enclosure frame.…

Low profile screen stands for Beetronics screen

The “connectors” option from Prusa slicer was used, but i suggest removing a bit of the side thickness from the connectors with a sharp knife to be sure the two parts fit well togheter.

Safe-O-tronic LSW101 Battery Lids

2 lids. Best to print them “standing up” to maximize strength in the tabs.

Various components for Mechatronics Electropneumatics Testing Boards ELM.03 ELM.06

Various components for Mechatronics Electropneumatics Testing Boards These components were helpful to use with various manufacturers pneumatic components such as actuators, valves or other components with a preparation for ELM.03 ELM.06…

Beijer Electronics CloudVPN holder

Use PLA. 3pcs horisontal walls.

Fysetc F6 electronics cover for Prusa clone

This electronics box is a resize of the original Einsy base and doors models to fit the Fysetc F6. I have an old Prusa MK2.5S clone with a Prusa Bear frame, and works with it like a charm. For the original frame the upper holes have to be…

Protective Case for Fragile LED Magnifying Glasses / Electronics Repair Goggles

Protective Storage Case for Fragile LED Magnifying Glasses (Electronics Repair Goggles) These low‑cost LED magnifying glasses are handy for electronics repair, soldering, inspection, and detailed work—but the frame and head‑mount are…

Altronix RBSN Mounts

The mounting holes can be used to drive countersunk screws directly into wood or you can you use threaded magnets to attach it to metal. I printed them out of PETG and did so vertically in Slicer to keep from needing any additional…

Top Surface Ironing Test

This calibration test is designed to find the ideal ironing settings for achieving a smooth top surface when printing with a 3D printer. The model consists of a 10x10 array of flat cylinders. Along the X-axis, the ironing speed increases…

Customizable parametric stable and waterproof electronics ip65 ip67 project box enclosure case housing

Stable and waterproof OpenSCAD case V7.4 by pbtec See here a wonderful comment from a user: “This is INSANE! You sir deserve deserve the biggest applaud out there. This is a box to rule them all! … I have to admit I first didn't…

Ironing flow test (ready to use with settings)

Ironing flow test for your filaments. How often the top layer that was ironed it's cracked or lines still visible ? No more failed top layers. Specially with PETG you need to fine adjust the ironing flow to achieve the best results.…

Easy customizable / parametric electronics project box case enclosure housing by pbtec

Easy customizable OpenSCAD electronic project box V2.4 by pbtec You’ll need to download the free, opensource OpenSCAD software from https://openscad.org/ and install it. Once installed, open the ".scad" file in Openscad. Activate…

Magnetic Connector for Electronic Projects

Features A magnetic connector for low-powered, removable electrical connections Fits two 6 x 2mm neodymium magnets (Edit: Added files for 6 x 3mm, 5 x 2mm and 5 x 3mm) Compact and easy to build into your models - roughly 10mm tall and…

Modular drawer for electronic components (Vase mode)

Other desings similar to this were not perfect for me, so I designed my own version. It was created to be a fast print in vase mode so when u have a new component you can quickly print drawer for it. I use a 0.6mm nozzle and high layer…

Animatronic Eye Mechanism ε3.2

The design can be entirely 3D printed and can use hobby electronics components. However I would recommend using Will Cogley’s animatronic compatible eyes and the dedicated EyeMech controller board available for purchase through…

The RIG (R1.1) — DIY helper stand for testing electronic components

ABOUT THE RIG The Rig is mostly printed DIY helper stand for testing electronic components in an easy and accessible way. This stand is built mostly from printed parts with DIN 35mm rails to provide easy and accessible testing. The rig…

Atorch DL24 Electronic Load case

(The links below are affiliate links. I may earn a commission at no extra cost to you, helping keep my work free and continuously improving my designs.) This case is meant for this Electronic Load:…

Raspberry Pi 5 + Pimoroni NVME Base Case

I recently received the NVME Base by Pimoroni for my Raspberry Pi 5. I noticed that there are only a few cases which accommodate it. I was sure that I could remix a nice case to change that. Here it is… Update: Added different bottom…

Modular stand for electronic microscope

This is a modular stand to hold the XSC G600 electronic microscope. I designed this because the original stand was terrible. Use 4 x m5 nuts and 4 x m5x30 bolts with hex head to assemble the stand. Important The arm-1.stl (orange x 2) and…

Animatronic FNAF Bonnie

Let´s build it! Animatronic FNAF Bonnie Video Part 1 - https://youtu.be/sBMSrNnxWrI Video Part 2 - https://youtu.be/6_IwNrdvX1I Video Part 3 - https://youtu.be/xwtQQssEBv4 List of parts- Check videos description Help me keep creating…

Brain Electronic Circuit - Wall Art (Larger - With CPU)

Increased the size a little to mostly fill the MK3S+ bed(disabled skirt). I also added a small box on top to allow a filament swap when the main section is done to give it a more cpu look.

Bambu Lab X1C/P1P Ironing Flow Test

Works with either Bambu Studio, or Orca Slicer. Uses default 0.20 Standard @BBL X1C settings. To use with P1P Series printers, you will need to adjust the profile to match your printers settings. The Ironing modifiers should remain in…

Electronics Schematic Stencil (Credit Card Size)

A wallet-sized stencil for quickly drawing electronic schematics. Includes resistor, capacitor, inductor, LED, switch, ground, voltage source and junction symbols. Perfect for students, engineers, makers and hobbyists

Ironing test prusa

Remixed to have premade settings for prusaslicer. Just import, slice and print.

Snaptronics – Solder-free electric circuit construction kit

Snaptronics gives you a bunch of solder-free 3d-printed bricks to build various basic circuits in a breeze on a magnetic snap-fit basis.

Brain Electronic Circuit remix

Just a remix to add some detail https://www.printables.com/model/117363-brain-electronic-circuit-wall-art/remixes I printed this with the Revo .25 nozzle in 3 and 4 colors. Print time took 4+ hrs no brim let it completely cool before…

All Original Ball Joint Animatronics

I a ball joint foxy (https://www.thingiverse.com/thing:1112196) but couldn't really find any of the other animatronics using ball joints (besides a "grim" foxy). So, I decide to make them. If you have found models of other animatronics I…

Raspberry Pi 5 Case for Pimoroni NVMe SSD Base (optional RaspBee 2 or Waveshare PoE)

I would suggest PETG at 0.2 layer height.

Ironing test for the Centauri Carbon

This is a matrix 10x10 to find the best combination of flow and speed on the ironing feature.

Electronics parametric box V2

Version 2.0 Dive into the future of DIY electronics with our Parametric Waterproof Electronics Box. This innovative design allows you to customize and modify the enclosure using Fusion 360, giving you full control over dimensions and…

Multiboard Voroni Battery Holder (AA+AAA)

A Voroni AA and AAA battery dispenser modified to mount to Multiboard. You'll need to add a Drop-In Nut Snap and two M4 screws to connect to the board.

Ironing Flow Test (Generic Export)

Ironing Flow Test model for testing 10% thru 60% flow in 10% steps

Top surface ironing test Orca Slicer

Test to calculate the straightening speed on the Orca Slicer. With this test, you can calculate the straightening speed you need by adjusting the speed from 15 mm/s to 40 mm/s, and using different flow rates from 10% to 50%.Test to…

test_ironing orca slicer

hi I created this model with different preset to tune your ironing in orcaslicer. simply take the file use your setting (normaly the only thing that change for each model is the ironing setting ) and print it. enjoy !D

Ender 3 all in one, universal rear electronics case

A rear mounted electronics case for the Ender 3. At the back, there is room to mount a Raspberry Pi, fan, buck converter and two relays on the left. On the right, either the standard board with four TL smoothers or an MKS Gen L or SKR1.3.…

Ender 3 V2 External Electronics box (MeanWell PSU and Motherboard) Improved

IMPORTANT : this model is about 20mm longer than the ender 3v2 print bed. So you will need to print this on a different machine or alter the model before printing. If you don't want to do that you can take a look at my original version…

Orca Slicer Ironing Settings Test

Modified Orca Slicer settings for my Neptune 3 Pro and added graph scale markers.

Carbide roni

Minimalistic ironing test

Please consider Liking this model :) Ironing test Each rectangle has different ironing settings. Pick the one that suits you the best :) Originally designed for my SV08 but you should be able to adjust it to your printer

Ohm's Law Circle Cheat Sheet - Electronics

Handy Cheat Sheet for calculating Volts, Amperes, Watts and Ohms using just two variables. Fusion360 design added for you to improve upon. Please share your feedback and comments :-)

mini roni for glock

fits aap1 mini roni kit

Bambu Ironing Test

These models are designed to test ironing flow and speed. They are optimized for 0.2mm and 0.16 layer heights. Models test the flow rates of 10%, 15% or 20% through the speeds of 10-40mm/s. The sliced files are for a Bambu X1C. Just load…

Top Surface Ironing Test - for Snapmaker U1

Modified Orca Slicer settings for Snapmaker U1 printed with eSun PLA+ and PETG

External Electronics Box for Ender-3 Pro

This box is designed for the following components: - SKR Mini E3 or stock Creality mainboard - Raspberry Pi 3B/3B+ - Stock Ender-3 Meanwell PSU - Stock LCD Screen Mounting: - The box mounts onto the PSU fan screw area. The PSU fan will…

Ironing test square

This is a recreation of the simple ironing test square by VladSalad at Thingverse. It's just a simple 50mm X 50mm X 1.6mm flat cube, I recreated it in FreeCAD and exported the STL so it's not the same file, but it is the same part. It…

RatRig V-Minion Electronics Enclosure

Rear mounted Enclosure for the V-Minion compatible with the SKR2, SKR E3 MINI V3, SKR PICO. Using this enclosure will require the use of a custom Y endstop mount, which mounts on top of the extrusion rather than the side. SKR2 SKR E3 MINI…

Creality K1 Ironing Test (Yet Another)

YET ANOTHER IRONING TEST. I've created in orca slicer an ironing test. Found many online didn't seem to translate fully for the K1 profile and had to manually adjust & check the ironing settings for each square, so I just made my own,…

Easy parametric box / enclosure for electronic projects

Easy box for electronic projects by pbtec There is a newer Version available. See https://www.printables.com/model/863273-easy-customizable-openscad-electronic-project-box Use Openscad customizer (Menu Window/unselect "hide customizer")…

Parametric ironing calibration test matrix

The ironing process (and its results) depend of three variables: flow rate ( FR ), spacing between ironing passes ( SBIP ) and printing speed ( PS ). The matrix shape allows to check two setting combinations at once; whilst we have three…

Boxes for diy electronics projects

The box is not 100% watertight but does have a pretty good seal with the stepped way the lid screws on. All you need is 4*m4 screws

3-Pin Magnetic Connector for Electronic Projects

Features A 3-pin version of my magnetic connector for low-powered, removable electrical connections Fits various sizes of magnets from 5 x 2mm up to 10 x 3mm Compact and easy to build into your models - the 6mm version is roughly 10mm…

Oral-B electronic toothbrush travel case box

I didn't find a travel box for the same kind of toothbrush that I have, so I made one. The brush snaps to the case by the neck and is easy to remove by hitting it to your hand. The top also snaps to the case. I neede these fast so had to…

Ender 3 V2 External Electronics box (MeanWell PSU and Motherboard)

Updated version can be found here: https://www.printables.com/model/201359-ender-3-v2-external-electronics-box-meanwell-psu-a Created electronics box for the MeanWell PSU and Ender 3 V2 motherboard so I could keep it outside of my…

Electronics parametric box OLD VERSION V2 Available on my profile

OLD VERSION V2 Available on my profile Dive into the future of DIY electronics with our Parametric Waterproof Electronics Box. This innovative design allows you to customize and modify the enclosure using Fusion 360, giving you full…

Sabine Wren Cosplay Helmet (w/ electronics and paint lines)

This was my first attempt at a helmet. I made it for my daughters' Halloween costume, because I wasn't happy with the designs I could find (including paid designs) and we really wanted a working sight with blinky lights. I've included a…

AIRSOFT KRISS VECTOR MINI RONI KIT FOR ELECTRIC GLOCK 18

I share with you the mini roni kit that I made for my glock cyma electrica for airsoft, you can make the barrel of the gun in 3D but I recommend putting a metal barrel, the gun was painted satin black. It may be necessary to heat in some…

Animatronic Terminator Eye

Eye with dilating pupil powered by a 2g micro servo: https://www.aliexpress.com/item/1005002973104855.html Will update with additional mounting for use in OneIdMonSTR's anmatronic skull project. It's still a work in progress and fiddly to…

Atorch DL24 Electronic Load module Case

This project takes an Atorch DL24 Electronic Load module and makes some minor modifications to it and encloses it into a custom 3D printed enclosure to provide improved handling and board protection. The project also converts the DL24…

Pimoroni Pirate Audio Case

(Update 1/26/2020) Added Amp and Speaker cases. Added a cover for LCD panel's bottom part. (Update 1/11/2020) Thickened walls slightly. This improves rigidness and also the modified back wall makes assembly easier. Summary This is a case…

Chronicles of Drunagor Playerboard

You can print as one piece or in 3 Pieces for smaller printers and glue it

3D Printer Electronics Enclosure

NEW VERSION 4.0 This is a large modular electronics enclosure for 3D printers. It's big enough (depending on controller board size) to hold the controller board, a Raspberry Pi, and other electronics. It is not designed to hold the PSU.…