Wyniki wyszukiwania: rota

Rotating Rings Toy

This is a pretty nice rotating rings toy which is perfect to use as a fidget toy in almost every situation. :) If you are not able to get the rings rotating freely, you can use the "looser-tolerances" version. If needed I can upload outer…

RotaRings - Print in Place Rotating Fidget

I designed this to expand on the “rings inside of rings” idea, and it gives this fidget a really interesting look and feel. It took six iterations to tune the tolerances, but the final version works great! Just give the model a few spins…

Clicky Rotate Counter

This 2-digit counter boasts a stylish design! It features a wheel with a satisfying click. Each number comes to a stop with a click. and easy snap on assembly. Assembly: 0. print a total of 5 parts: ‘Case_M’, ‘Case_F’, ‘Spring’,…

Rotating 4 rings toy Fidget Sphere different patterns

I wanted to strech my knowledge of the 3D design software and I always like a nice fidget. Especially a fidget which suites 3D printing very well. These sphere can easily be printed without supports. After printing it needs a bit of…

Mega Extruder Rotation Visualizer Bundle

Inspired by Mikolas Zuza Link: https://www.prusaprinters.org/prints/10-extruder-rotation-vizualizer What you need: Super Glue 8x3mm Neodymium Magnet 3D printed Visualizer Montage: Just glue the magnet correctly in the center of the circle…

NEMA (extruder) motor rotation indicator

I always like to see what is going on with my printers. Sometimes I wonder what movement the extruder motor is making (extruding, retracting, slow, fast, etc.), which is not always so visible on the Prusa MK2 / MK2.5 / MK3. Hence I have…

Universal wall mount - rotatable - V3

The disk inside can rotate in 45° increments for maximum hanging options. This version is uses less material and is a little slimmer

Rotating Dice

This was totally based on these nice and well machined rotating dice: To make one, you'll need: 4 small bearings (3x10x4 mm) lke these ones: https://www.amazon.com/Fishing-Shielded-Miniature-Bearings-VXB/dp/B002BBF59C (Not sponsorship) 14…

Prusa Extruder Rotation Visualizer Turbine

All design credit goes to ZekeAsakura https://www.thingiverse.com/thing:2900552 I remixed it as follows: Reduced the diameter to +/- 40mm Trimmed the height to +/- 10mm Recessed a small hole to make it easier to glue in a 8mmx3mm magnet…

Print-in-place Rotary Fidget Detent Knob with detent strength options

This fidget clicker is a neat little gadget showcasing the power of print-in-place mechanisms. Choose between three detent strength options. Simply print the desired model, break it free from the bed and with minimal cleaning up, its…

Scalable Rotating Kitchen Utensil Holder

A practical and visually appealing solution for organizing your kitchen essentials that can be customized to fit your needs. This 3D printable holder showcases a minimalistic design with a distinct cylindrical oval shape and a rotating…

Radial/rotary engine toy (print in place)

This model can show both a radial engine (rotating crankshaft with a stationary body) and a rotary engine (stationary crankshaft with a rotating body).

Clip-On Filament Guide for Prusa MK3S & MK3S+ w/ Rotating Head

This filament guide uses a 608 Bearing (22mm OD x 8mm ID x 7mm Deep) to allow the filament guide head to spin freely. Like most things I design - it is over-engineered. I just needed a simple guide to prevent tangling and 20 versions…

Base de exhibición giratoria - Rotating display table.

Este es un remix de “Airatius” : www.thingiverse.com/thing:2961210 al cual le hice las siguientes adiciones y modificaciones para una mejor usabilidad. Base: Creé el agujero para colocar un interruptor. Creé un agujero para introducir el…

Rotary Encoder KY-040 (EC11) Housing with Snap-fit and Screw Mount

Simple housing case with Snap-fit for KY-040 or similar Rotary Encoder. It has a hole in a cover for easy mounting under a desk or anywhere else with a screw. Easy access to the 5-pin DuPont connector. KY-040 Rotary Encoder Module Spacing…

Wind Powered Lighthouse with Savonius Turbine – Rotating LED Tea Light Effect

Detailed Description Video day Video evening This wind powered lighthouse uses a Savonius turbine to rotate the complete upper lighthouse structure using only airflow. Inside, a standard LED tea light remains stationary while the…

#RESISTANCECOVID RC4 - Prusa Protective Face Shield - RC1 RC2 RC3 RC3.1 - easy shield FIXATION & ROTATION

REMIX RC1 RC2 RC3.1 shield face protection from Prusa without any hole to do in the shield and compatible with any 150 x 150 printer (medium model) REMIX: https://www.thingiverse.com/thing:4233193…

Flexi Guardian with Detachable Arms and Rotating Head - Legend of Zelda Breath of the Wild

This is a remix of IXPatch's excellent remix of Crafty Sven's excellent articulated guardian, with detachable arms.

Rotary Stage: Updated

UPDATE: 3/1/2024 - ver. 1.1 I added additional pictures and explanation, below, to try and clarify the assembly process. UPDATE: 5/12/2023 - ver. 1.1 I have added a worm and worm gear set for finer rotation control. The FINE version of…

Fan Rotated 90deg- Prusa Filtration System Housing (Remix)

Installation instructions is identical as provided by Prusa at : https://help.prusa3d.com/guide/7-advanced-filtration-system-add-on_361946#362491 If there are any hurdles or request, please feel free to reach out in comment or direct…

PAINTING ROTATING STAND - 608-2RS

I remixed the original model to use a 608-2RS bearing instead of the original 609

Rotating Dishwasher Clean/Dirty/Washing Magnetic Sign

Dishwashers nowadays are usually so quiet that people don’t realize it is running. Plus my appliance is so well designed that no buttons, lights or indicators are visible when it is closed. Family members may open the dishwasher by…

Wire holder for rotary clothesline / Drahthalter für Wäschespinne

This wire holder is designed for a wire with a diameter of 2.5 mm and a base frame with a diameter of 14.5 mm. Printed with 50% infill. You are welcome to change the stp file according to your measurements. Or you write down what…

You Spin Me Round, Rotating Spur Gear Toy

This project has three separate pieces. 2 rotating spur gears and 1 base. The small spur gear has a crank handle and when rotated the smaller gear rotates the larger gear. The 2 nubs on the base are for holding the assembly in place with…

Case for Rotation LED Clock DS1302

I've designed a simple case for the Rotation LED Clock. The enclosure has cutouts for the lightsensor and the thermometer and of course for the Display. The holes for the Buttons, the speaker and the mini-USB-Port are located in the…

Control Box for LCD2004A display, Arduino Uno, and KY-040 rotary encoder.

A small control box mounts an Arduino Uno, an LCD2004A display, and a KY-040 rotary encoder. Internally, the box features mounting points for all three boards and cutouts for a panel mount push button switch, a panel mount power switch, a…

Universal rotating platform for Garden Wind Spinners, no support

Co to tu máme: Tento model představuje univerzální rotační platformu, která byla upravena z předchozího designu. Obsahuje rotační vršek pro klasické ložisko o rozměrech 8x22x7 mm a spodní základnu pro matku 13 mm. K dispozici jsou dvě…

Furniture Roller - Castor - Smooth 360 ° Rotation - Suitable for IKEA Lack - Möbelrolle

--- This model is without a break to fix the caastor. You can find a model with break - here . --- This furniture rollers have smooth 360 rotation around the vertical axis and can be used for example for your Prusa Enclosure V2 - MMU2S to…

XYZ /X Y Z axis & ABC /A B C rotation( Movable rings) / Axe XYZ /X Y Z et rotation ABC /A B C (anneaux mobiles)

English XYZ axis + ABC rotation The rotation rings ABC are mobile. Check that the rings can rotate easily before gluing the axes in position. Do not hesitate to adjust the bushings before assembly. CHECK THE DIRECTION OF THE BUSHES BEFORE…

Gridfinity Bin for Parkside PFBSA 4 A1 Rotary Tool

Custom Cutout Gridfinity Bin for Parkside PFBSA 4 A1 Cordless Rotary Tool (from Lidl) Bin is 5 x 2 units - doesn't fit the Mini printer, so I prepared also the split version with dovetail joint to fit the Mini printer. ℹ 1 split part (for…

Shaping tool for rotating ceramics

4 designed and printed pieces placed in a base. These are pieces for rotating ceramics, and are used to give a jar the geometry of the design profile. Each piece has two profiles. In the attached image you can see the result obtained with…

Knob for Girolle - Rotary Cheese Cutter (Tête de Moine)

The knob fits the original Girolle from LaGirolle SA. A Girolle is used to scrap very fine layers of a cheese called “ Tête de Moine ”. You get with a Girolle fine rosettes of cheese to enjoy as an apéritif with matching white wine. The…

Rotating rings fidget toy - FreeCAD parametric

I found the rotating rings fidget very satisfying when I scaled it up to 150%. Then I figured simple scaling could affected the gap making the toy too loose. So I decided to make a FreeCAD version for everyone to find their preferred…

Support de télécommandes tournant - Support for rotating remote controls

Support de télécommande tournant sur 360° Ce projet comporte 3 fichiers. Base.3mf Entretoise.3mf Bac.3mf le fichier support télécommande complet , regroupe tous les fichiers. Disposition sur la plaque d'impression: Paramètres d'impression…

Rotary Tool Clamp

This is a simple tool clamp that allows the rotary tool to be mounted in a vise for hands-free operation. There is also an 25mm square accessory block which can be used on the opposite end of a wood vise to prevent racking if desired (see…

Front cover for 1602 LCD display with holes for buttons and rotary encoder

Thinkercad link to replicate the design and be able to do edits: https://www.tinkercad.com/things/2ZlReQmB7Ea-front-cover-for-1602-lcd-display

Rotatable Towel Holder hooks

Simple Rotatable towel hooks, could be fixed with simple nails or screws, no supports required

Extruder Rotations Template/Gantry Neptune 4

I build this gantry to check the righ Extruder Rotation in your printer

EC11 rotary knob extender for d-shaft encoders

On split keyboards with MX key switches and rotary encoders, the knobs can often be lower than is comfortable. This print adds 13mm of height to the rotary encoder. (Only works with D-shaft encoder, not the star shaped shaft). The side…

Knob perilla rotary encoder con grip

Enclosure3D es un controlador de ambiente para impresoras 3D. El dispositivo regula tanto la temperatura como la humedad del espacio en donde se encuentra la impresora. Se controla mediante un rotary encoder y este es la perilla que…

Furniture Roller - Castor with break - Smooth 360 ° Rotation - Suitable for IKEA Lack - Möbelrolle

--- This model includes a break to fix the caastor. You can find a model without break - here . --- This furniture rollers have smooth 360 rotation around the vertical axis and can be used for example for your Prusa Enclosure V2 - MMU2S…

Gridfinity - 5x2 - Powerfix Profi+ Rotary cutter holder

This holder ensures secure and convenient storage for your rotary cutter, allowing quick access whenever creativity strikes. Contains magnet holes and can be stacked.

Cobra Microtalk Radio Clip - Carabiner Compatible

Included is some gcode used to print, 2 STLs one with & one without the signature & a step file as well. Recommeded settings are: 0.2mm layer height Print with supports - organic on the baseplate Print using PETG Use 50% infill, honeycomb…

Rotating Print in Place Herringbone Ornament (filament swap)

This print in place model allows you have to most unique christmas ordament ever. Because of the structure this ornament is only able to be produced by a 3D-printer so you won't find anything similar hanging in your tree. Print…

Oil Cap Replacement for Rotary Table

Had the plastic oil cap shatter on a Golden Sun CNC-401RV rotary table for a CNC. This is a replacement part. I printed it out of orange PETG but you could use clear and print solid and slow if you want it to be more like the original. I…

Spice Jar Anti-Clog Lid with Rotating Mixer - Improved Spice Dispenser Cap

This anti-clog lid was designed for many common glass spice jars and solves a typical problem: spices often only come out after aggressive shaking or tapping. Compatible with various spice jars including: Kania (Lidl) Le Gusto (Aldi)…

SPIRO - Spinning Physics Inertial Rotation Object

Recommended print settings: Material: PLA Layer Height: 0.10 Infill % : 15 Supports: No Brim: Optional Print Orientation: Default as modeled Printing the packaged STL will result in 12 spinners, one driver, the rod and cap. Use the…

Rotating Storage Unit

Rotating Storage Unit Summary A completely recycled storage unit using Filament reels as the frame and 3D printed drawers. The design is modular, allowing the user to stack as many drawers as they want as well as to adapt the drawers to…

rotary dryer ground cover

A simple and fast printed cover for your rotary base. Print Settings Printer Brand: Prusa Printer: MK3S Rafts: No Supports: No Resolution: 0.2 mm Infill: 100%

PTFE holder used for the injection molded Spool holder - R4 with the hole relocated and rotated.

This model avoids an additional bend in the PTFE tube when a spool is placed higher than the filament buffer. It is a remix of the MMU3 printable parts \ Spool holder \ PTFE holder -> injection molded R4 version. Remarks The new location…

Rotary Drill Bit Holder

It can hold the following diameters: Ø 1 - 1.5 - 2 - 2.5 - 3 - 3.5 - 4 - 5 mm Hardware required : 1 M3x20mm screw 1 M3x10mm screw 2 M3Sx4mm threaded inserts 3 6,35x10,3mm compression springs The threaded inserts have to be put in place at…

Pedestal for Sagrotan No Touch

To save some space, I designed a small pedestal so that the Sagrotan No Touch soap dispenser can stand on the edge of the sink. The width of the sink edge is 36 mm, and the slight incline of the wall was taken into account in the design.…

Big agitator rod / stirrer to fit the Paterson Super System 4 rotary development tanks

Hi This is an alternative agitator rod for the Paterson Super System 4 rotary development tanks. I have two issues with the original agitator rods: They are so short you easily get photochemistry on your fingers if you're not careful when…

Držák modulu Ignitech DCCDIP2 pro Rotax 912

Dvoudílný držák modulů DCCDIP2 od firmy Ignitech pro zapalování motoru Rotax 912. Držák je navržen pro montáž na místo mimo motorové lože letounu.

Rotary or Mill Table T-Slot Sweeper 0.670" Wide

Cleans the T-Slot on a milling table. T-slot size: Tee Width: .670", Tee Height: .305", Slot Width: .420 Used default slicer settings for PETG material.

Rotationspfeil Extruder "Rotato"

Der Pfeil wir mittels eingedruckter Magnete an der Motorwelle des Extruders befestigt. Eingesetzt werden 2 Stück Magnete. Magnetgröße 6x1,75 mm

PTFE holder used for the injection molded Spool holder - R4 with the hole relocated and rotated for a spool that is less wide.

This model avoids an additional bend in the PTFE tube when a spool is placed higher than the filament buffer. It is a remix of the MMU3 printable parts \ Spool holder \ PTFE holder -> injection molded R4 version. Some spools are less wide…

Star Wars Achsrotation MK4 / MK4S X-Wing Todesstern

Star Wars Achsrotation MK4 / MK4S X-Wing Todesstern habe ich mit 50% Infill und einer 0,4 Nozzle und 0,10mm Fast Detail im Prusa Slicer Gedruckt über likes makes und follower würde ich mich sehr freuen, Peace MazZe

Eggs rotary Dispenser + slow down

Egg dispenser. Add model for bed 256x256x256 type bambu. 3110_Bambu dispenser eggs.3mf New model with solution break eggs https://www.printables.com/model/1223603-2025_dispenser-rotary-egg New model 2025…

Wankel Rotary Fidget Spinner Toy

The Wankel rotary engine is marvel of modern engineering, and now you can experience the wondrous complexity of it's mechanical operation in the palm of your hand! The assembly consists of three pieces, all lightweight and easy to print.…

Model Turner for Painting or Viewing. Rotating Table. V2

A Two Piece Rotating Table to help with painting models. No bearings needed, prints without supports. (approx 4 to 5 hrs on a Ankermake M5C , 10% infill). (Appears to be sturdy enough) can be used as a display. Sizes : - Top Plate/Table…

Introducing the Ultimate Portable Rotatable Data Cable Organizer Storage Box!

Tired of untangling a web of wires every time you need to charge your devices or connect peripherals? Say hello to the solution that will revolutionize your cable management – The Ultimate Portable Rotatable Data Cable Organizer Storage…

Miniature Labubu with Rotating Eyes - Keychain Option

Labubu Mini - This model is shrunken down to 2/3rds of the original size. Plus I added the option for a keychain. The body can be printed without any supports. I did add a brim to make sure it doesn't tip while printing. Options include…

Flexi Guardian - Rotating Head Remix (Zelda Breath of the Wild)

This is a remix of Crafty Sven's excellent articulated Guardian. Just like the original, it prints without supports. When I first printed the original model, I was honestly surprised that the head isn't designed to move - because most of…

Bubu with rotating eyes

Found this on Makerworld but it is no longer there so enjoy! Design Concept The Bubu figure is an adorable creature characterized by large enigmatic eyes that rotate, lending an interactive element to the design. The whimsical fur texture…

Battery Missle Launcher - AAA and AA - rotatable

Battery Missle Launcher for AAA and AA batteries This print is split into multiple parts so there are a few details you can print in a different color if you like. The .3mf's are already labeled in my suggested colors, I am looking…

Rotating brake disc keychain

Gently snap the caliper onto the disc.

Extruder rotation vizualizer

Extruder movements on both MK2/S and MK3 can be quite difficult to see. The other three axes are easily visible, and honestly, it can be super mesmerizing to watch. A lot of us always want to know what’s our printer doing. Peter…

Rotating Keychain Display

UPDATE: I added a new profile with a top piece with a label on it where you can put your price or name on it. You can edit it in Bambu studio. Just put some text to it. I made this rotating keychain display. It's very sturdy and requiers…

Hollow Flying Ring - Long Distance Spiral Toy (extra rotation!)

How to throw? : Grip the object exactly like a soda can and toss it just like a football, making sure the heavy ring points forward. Check out the example above for guidance. To get a smoother flight, snap your wrist gently as you let go…

Spinny rotating rings fidget toy

You can find the openscad code here: https://github.com/diademiemi/openscad_fidget_toys This can be printed in it's default orientation in-place, no supports

Articulated Lizard with Rotated Ankles and Improved Clearances

A Remix of McGybeer's classic articulated lizard, with wider clearances so it can be printed smaller (my Ender 3 can consistently handle it at 0.55 scale with no issues). The ankles are also improved because the original looked a little…

Rotating brake disc keychain V2

Improved version of my brake disc keychain, featuring enhanced fit and refined details for a more realistic look. Use a small amount of force to snap it into place.

NEW Christmas Trees Rotating Ornament 2025 edition

Check out other Christmas models:

Yarn Spinner (Rotating Skein Holder for Crochet/Knitting)

I designed a 3D-printed version of a spinning skein holder. The spindle is held captive by a small keyed shaft pressed into a 608 bearing. Print Settings: 0.4mm nozzle 0.2mm layer height Supports only on spindle and spindle peg 15-20%…

Helical and rotary Eggs dispenser

New helical model without supports. Helicoidal eggs dispenser approx 15 units of XL size, maybe 16/18 of other sizes. Optimized model to do it without supports and redesigned (recommended) A model with supports is also left, but it is…

Sagrotan No Touch Cap

A simple cover for the SAGROTAN soap dispenser. By the way, you can find a shelf for wall mounting in my 3D models . IMPORTANT: YOU ARE NOT ALLOWED TO USE MY DATA FOR COMMERCIAL PURPOSE (E.G. for your ETSY or EBAY) WITHOUT MY CONCENT.…

Paralane Rotating Desk Organizer

This is a new addition to my Paralane design… the Paralane Desk Organizer. This organizer comes in three different sizes to fit most desktop situations. You can store large or small items you need within reach. And it rotates!! Don't have…

T-nut M3 drop-in rotating V-Slot

T-nut for 20x20 or 20x40 V-Slot aluminum extrusion (6 mm gap) compliant with original metal T-nut but adopted for M3 nut. There's also a version that fits to #4-40 x 3/16'' nut: https://www.thingiverse.com/thing:3366563 Fits for most of…

BDSM Modern (self) Bondage Fiddle with rotating hand-holes, parametric

Creality K1C/K1/K1 Max Rotating Bowden Clip

A print in place rotating clip for the K1 series bowden tube, easy to print, easy to use.

2023 Stackable rotary drink dispenser

2023 Stackable rotary drink dispenser, improved from model 2022. which takes the same geometry, but improving aspects, gained 6 mm in height to fit better in your fridge, increased 2 mm in width to reinforce the height floors.…

Rotary bearings 200mm---> 608Z

Trying my hand at making a robot dog and needed a thin bearing for my cycloidal drive, but didn't want to break the bank in just bearings alone. Hence I decided to design one I could use with just some standard 4.5mm steel BBs. Print…

Battle Ship Benchy with rotating turret

To rotate the turret, gently twist the turret after printing to break the connection. Two turret designs. It can be printed without support as in normal Benchy. Category: 3D Printer Accessories

Rotating Fishing Tackle Box

This cylindrical tackle box features five individual compartments accessible by rotating the box. Ideal for organizing fishing hooks and other small items. I recommend to print it in PETG. Assembly Take the "Clicky Thing" and insert it…

Ergo Bit Tool - Rotating end & super grip!

Intro This is an ergoniomic bit tool with a nice textured handle and rotating end piece ! Try it, you will really enjoy working with it! Why you'll love it? Suitable for all HEX bits Very small but still a super grip for all your work…

Rotating Nintendo Switch Game Holder

Nintendo switch rotating game case made on a 3D printer! This design is flashy and will impress your friends while providing great functionality! Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution:…

Rotary Fidget Toy

This is a different interpretation of the rotating ring toy by Marvin. There is 3 models, each with different tolerence. (0.2, 0.15, 0.1) Comes with a base to display the toy.

Rotating colander

This rotating colander is a practical tool for rinsing and draining fruits or vegetables, designed for easy 3D printing. The file is ready to download so you can print it yourself and add a useful piece to your kitchen.

Chevrolet Camaro 1967 kit card with rotating wheels

Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model in multiple colors produces…

3D printed Rotadraw

Play with the kids! Rotadraw is a retro drawing toy, where the children as young as 4 years old can participate. Rotadraw reinvented with 3d printing. Attach a disc to a piece of paper using the pushpin. Mark the dot on the paper next to…

2025_New Dispenser rotary eggs

New model redesigned on the original one with a robust upper part, new blade to avoid breakage in the curve acting as a brake (previous slow-down eliminated) and redesigned anti-fall piece. Split models with improved connection between…

2024 Stackable rotary drink dispenser

2024 - New geometry of the beverage dispenser, modified shape of the upper can inlet, beams and more stylized shape. Compatible with previous model 2023. https://www.printables.com/es/model/377642-2023-stackable-rotary-drink-dispenser…

Milwaukee Rotary Tool Packout Organization Kit

Lots of files! You'll most likely want to print something similar to this: 1× Slim_Packout_Long_Cutout_Bin_for_Milwaukee_bit_holders (This goes on top) 1× Intermediate-Bin (This goes on the bottom) Various bit holders: 4×…

Rotating Coffee Pod Holder - 2 Version

Declutter your countertop with this Rotating Coffee Pod Holder ! Designed to store multiple coffee capsules in an elegant, space-saving manner, this holder ensures easy access to your favorite brews. The rotating feature makes selecting a…

Extruder (NEMA) motor rotation indicators

After learning about the rotation indicators for the extruder motor, I loved the idea, but I didn't really like any of the designs I was seeing. I wanted a gear/cog but couldn't find any I liked. So I made my own, I just wanted one but…

4-axis modification for MK3s with rotational printing head

Warning: this mod is experimental and needs engineering and mechanical background to build. No guarantee and very little support provided by me. This is a modification you can add to your MK3s to be able to print 90° overhangs without…

Fidget Gyroscope Rotating Rings

These are a couple of gyroscope fidget toys I designed and after playing with/testing them I think they are ready to share! Both the disk and cog at 100% are about 80mm in diameter and 24mm tall. 0.4 or 0.6 nozzle, No supports, 3…

🝒 Rotating Machine

Hardware you need: 8 M3 X 25 mm bolts and 6 nuts 3 X skate roller bearing (608 size) Friction is low! limited to gears and bearings, also fluids unless you move to space. Connector dimensions provided so please design more tools! FAN TOOL…

Rotating Display table

This is my design of rotating display table. It is quite useful if you want to make your recordings of stationary objects more interesting to watch. Overall this design works pretty well and I have already made a lot of nice shots with…