1280 modeli
This is a pretty nice rotating rings toy which is perfect to use as a fidget toy in almost every situation. :) If you are not able to get the rings rotating freely, you can use the "looser-tolerances" version. If needed I can upload outer…
Wydruk około 1,81 €–2,21 € nettoWstępna wycena jednego wariantu
I designed this to expand on the “rings inside of rings” idea, and it gives this fidget a really interesting look and feel. It took six iterations to tune the tolerances, but the final version works great! Just give the model a few spins…
Wydruk około 6,55 €–8,01 € nettoWstępna wycena jednego wariantu
This is a remix of Crafty Sven's excellent articulated Guardian. Just like the original, it prints without supports. When I first printed the original model, I was honestly surprised that the head isn't designed to move - because most of…
Wydruk około 7,20 €–8,79 € nettoWstępna wycena jednego wariantu
This was totally based on these nice and well machined rotating dice: To make one, you'll need: 4 small bearings (3x10x4 mm) lke these ones: https://www.amazon.com/Fishing-Shielded-Miniature-Bearings-VXB/dp/B002BBF59C (Not sponsorship) 14…
Wydruk około 0,06 €–0,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Keychain with Letter where the inner part can freely rotate. Print instructions Make sure to first tune your filament in. I found this to be very effective: https://www.thingiverse.com/thing:1622868 It also helps to find any differences…
Wydruk około 0,44 €–0,54 € nettoWstępna wycena jednego wariantu
Globe stand is compatible with all lamp globes by @FritzPeppone published here: https://www.printables.com/model/1087513-solar-system-lithophane-planet-lamp-collection Compatible with E27 bulb socket adapter like this one found at OBI:…
Wydruk około 6,12 €–7,48 € nettoWstępna wycena jednego wariantu
A practical and visually appealing solution for organizing your kitchen essentials that can be customized to fit your needs. This 3D printable holder showcases a minimalistic design with a distinct cylindrical oval shape and a rotating…
Wydruk około 1,35 €–1,65 € nettoWstępna wycena jednego wariantu
Easy to print yet detailed and interesting model of a Creeper from Minecraft. It looks better than other models available, it was designed to avoid supports, and has the option of a rotating head. Designed from scratch in Tinkercad.…
Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu
Two tanks with a hole for a keychain Centurion has a rotating tower Print in place few supports needed scaleable 25-40min print time, PLA, layer height 0.3mm
Wydruk około 0,25 €–0,30 € nettoWstępna wycena jednego wariantu
This is a simple, yet very useful design for a all-in-one spotlight. After scouring the internet for simple LED spotlight designs we could use to show off Lego models with simple and easy accessible materials, I came up with nothing. I…
Wydruk około 0,43 €–0,52 € nettoWstępna wycena jednego wariantu
This is a Nerf target that rotates or "crawls" each time you hit the top bullseye. My ten-year-old son was looking for Nerf targets and couldn't find any that he liked, so he made his own. This is the first 3D image he's ever made. To…
Wydruk około 1,47 €–1,80 € nettoWstępna wycena jednego wariantu
Este es un remix de “Airatius” : www.thingiverse.com/thing:2961210 al cual le hice las siguientes adiciones y modificaciones para una mejor usabilidad. Base: Creé el agujero para colocar un interruptor. Creé un agujero para introducir el…
Wydruk około 2,19 €–2,68 € nettoWstępna wycena jednego wariantu
Detailed Description Video day Video evening This wind powered lighthouse uses a Savonius turbine to rotate the complete upper lighthouse structure using only airflow. Inside, a standard LED tea light remains stationary while the…
Wydruk około 3,32 €–4,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
T-nut for 30x30 V-Slot aluminum extrusion like PRUSA MK3S (8 mm gap) compliant with M3 nut. I used them to install the Rubber Feet Support for Prusa MK3 by Volan on the PRUSA MK3S If you like it, plz post a make :) Print Settings Rafts:…
Wydruk około 0,14 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I remixed the original model to use a 608-2RS bearing instead of the original 609
Wydruk około 2,54 €–3,10 € nettoWstępna wycena jednego wariantu
Super easy to print, detailed and interesting model of a Wither from Minecraft. It was designed to avoid supports, and has a rotating head. Designed from scratch in Tinkercad. Insert the body into the heads. No glue necessary. Tolerances…
Wydruk około 0,80 €–0,97 € nettoWstępna wycena jednego wariantu
Dishwashers nowadays are usually so quiet that people don’t realize it is running. Plus my appliance is so well designed that no buttons, lights or indicators are visible when it is closed. Family members may open the dishwasher by…
Wydruk około 1,68 €–2,05 € nettoWstępna wycena jednego wariantu
This is a Simple 3 Parts Rotating Tablet Stand for Ikea Lack Enclosure 1 tablet stand 1 threaded cap 1 bottom corner
Wydruk około 3,10 €–3,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I found the rotating rings fidget very satisfying when I scaled it up to 150%. Then I figured simple scaling could affected the gap making the toy too loose. So I decided to make a FreeCAD version for everyone to find their preferred…
Wydruk około 12,44 €–15,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Support de télécommande tournant sur 360° Ce projet comporte 3 fichiers. Base.3mf Entretoise.3mf Bac.3mf le fichier support télécommande complet , regroupe tous les fichiers. Disposition sur la plaque d'impression: Paramètres d'impression…
Wydruk około 7,40 €–9,04 € nettoWstępna wycena jednego wariantu
Rotating D-Ring Wall Mount with a swivel D-ring and wall-mounted holder. The flattened D-ring rotates 180 degrees inside the mount, allowing flexible hanging or tie-down angles. The mount can be installed anywhere using two M5 bolts or…
Wydruk około 0,46 €–0,56 € nettoWstępna wycena jednego wariantu
Rotating Storage Unit Summary A completely recycled storage unit using Filament reels as the frame and 3D printed drawers. The design is modular, allowing the user to stack as many drawers as they want as well as to adapt the drawers to…
Wydruk około 9,26 €–11,32 € nettoWstępna wycena jednego wariantu
With this tool, de-icing windows becomes a real adventure. Thanks to the handle, the "Rotating Scraper" can be held easily and stably, and the blades can be rotated with the other hand. This means de-icing in the early morning is finally…
Wydruk około 3,37 €–4,12 € nettoWstępna wycena jednego wariantu
Enhance the versatility of your Portable Zyliss All-Purpose Vise with these 3D printable rotating grippers! Designed to hold pipes, dowels, and circular objects securely, as well as position square pieces of wood diagonally, these jaws…
Wydruk około 3,78 €–4,61 € nettoWstępna wycena jednego wariantu
A Two Piece Rotating Table to help with painting models. No bearings needed, prints without supports. (approx 4 to 5 hrs on a Ankermake M5C , 10% infill). (Appears to be sturdy enough) can be used as a display. Sizes : - Top Plate/Table…
Labubu Mini - This model is shrunken down to 2/3rds of the original size. Plus I added the option for a keychain. The body can be printed without any supports. I did add a brim to make sure it doesn't tip while printing. Options include…
I wanted to strech my knowledge of the 3D design software and I always like a nice fidget. Especially a fidget which suites 3D printing very well. These sphere can easily be printed without supports. After printing it needs a bit of…
Found this on Makerworld but it is no longer there so enjoy! Design Concept The Bubu figure is an adorable creature characterized by large enigmatic eyes that rotate, lending an interactive element to the design. The whimsical fur texture…
Gently snap the caliper onto the disc.
UPDATE: I added a new profile with a top piece with a label on it where you can put your price or name on it. You can edit it in Bambu studio. Just put some text to it. I made this rotating keychain display. It's very sturdy and requiers…
You can find the openscad code here: https://github.com/diademiemi/openscad_fidget_toys This can be printed in it's default orientation in-place, no supports
Improved version of my brake disc keychain, featuring enhanced fit and refined details for a more realistic look. Use a small amount of force to snap it into place.
Check out other Christmas models:
I designed a 3D-printed version of a spinning skein holder. The spindle is held captive by a small keyed shaft pressed into a 608 bearing. Print Settings: 0.4mm nozzle 0.2mm layer height Supports only on spindle and spindle peg 15-20%…
This is a new addition to my Paralane design… the Paralane Desk Organizer. This organizer comes in three different sizes to fit most desktop situations. You can store large or small items you need within reach. And it rotates!! Don't have…
T-nut for 20x20 or 20x40 V-Slot aluminum extrusion (6 mm gap) compliant with original metal T-nut but adopted for M3 nut. There's also a version that fits to #4-40 x 3/16'' nut: https://www.thingiverse.com/thing:3366563 Fits for most of…
A print in place rotating clip for the K1 series bowden tube, easy to print, easy to use.
To rotate the turret, gently twist the turret after printing to break the connection. Two turret designs. It can be printed without support as in normal Benchy. Category: 3D Printer Accessories
This cylindrical tackle box features five individual compartments accessible by rotating the box. Ideal for organizing fishing hooks and other small items. I recommend to print it in PETG. Assembly Take the "Clicky Thing" and insert it…
Intro This is an ergoniomic bit tool with a nice textured handle and rotating end piece ! Try it, you will really enjoy working with it! Why you'll love it? Suitable for all HEX bits Very small but still a super grip for all your work…
Nintendo switch rotating game case made on a 3D printer! This design is flashy and will impress your friends while providing great functionality! Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution:…
This rotating colander is a practical tool for rinsing and draining fruits or vegetables, designed for easy 3D printing. The file is ready to download so you can print it yourself and add a useful piece to your kitchen.
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model in multiple colors produces…
Declutter your countertop with this Rotating Coffee Pod Holder ! Designed to store multiple coffee capsules in an elegant, space-saving manner, this holder ensures easy access to your favorite brews. The rotating feature makes selecting a…
These are a couple of gyroscope fidget toys I designed and after playing with/testing them I think they are ready to share! Both the disk and cog at 100% are about 80mm in diameter and 24mm tall. 0.4 or 0.6 nozzle, No supports, 3…
Hardware you need: 8 M3 X 25 mm bolts and 6 nuts 3 X skate roller bearing (608 size) Friction is low! limited to gears and bearings, also fluids unless you move to space. Connector dimensions provided so please design more tools! FAN TOOL…
This is my design of rotating display table. It is quite useful if you want to make your recordings of stationary objects more interesting to watch. Overall this design works pretty well and I have already made a lot of nice shots with…
The Hadley telescope by Maff is a great design that allows makers for an easy and cheap introduction to astronomy. There are lots of difficulties when using a telescope for the first time, for me one of them was trying to take a picture…
https://www.youtube.com/watch?v=fv14fDUk0uI - tutorial
Please leave a like and download this was very very hard to make!! best printed with color changing or silk PLA, i do not know why!?! check out my buddy bobtherunner123 https://www.printables.com/@Bobtherunner_1996757
I remodeled the rotating platform of Rudniol ( https://www.thingiverse.com/thing:3278530 ) for better usability. The platform has a diameter of 15 cm. I eliminated the space between bottom and top part of the platform in order to minimize…
A strong clamping vise that is setup with a rotating and tilting ball joint, allowing you to securely hold objects up to 11 cm wide at the perfect angle. The jaw faces are setup to be interchangeable, and the hollow base has a threaded…
A great print for Valentine's Day! The uploaded models of the bracelet have two sizes: 6 links (approximately 190 mm, 7.5") 7 links (approximately 215 mm, 8.5") You can remix the model to add more links or change the heart to a different…
The existing spool holder of the ender 3 V3 SE added to the shaking of the Z-axis to reduce shaking and enable better filament supply by rotating the direction of the spool holder 90 degrees. material 1. M5 nuts x 2 2. M5 x 15mm = 1, M5 x…
I made this storage solution for the “ Ergonomic Workshop Aids " contest and it adds more storage for the smaller things you are working with without taking up too much space. You can pull it towards you when you need it, and when you're…
Check out other Christmas models:
Preface I bought a Shop-Vac and Cyclone Dust separator a while ago; The Vacuum came with a 40mm hose, which is just not the best choice for a semi-static dust collector installation. I ordered a 60mm hose and had to solve the problem of…
This fidget toy is fully Print in place and does not need any assembly. Perfect to test your printer or just as a fidget on your desk. If you turn the second square really fast you can even see a gyroscopic effect. The “Low tolerance”…
Circular Joint After searching the internet for some time, I could not find a circular joint that was simple and that would work for what I needed. So I decided to make my own using Autodesk inventor. Also, there is a test fit cylinder(In…
🇬🇧 Rotating Keychain Stand – 3D Printable Organizer This rotating stand is a practical and stylish solution for organizing and displaying keychains, tags, or small collectibles. Its compact design fits easily on a desk or shelf while…
Notice - make sure to use Arachne wall generator or enable printing thin walls setting in your slicer, as some elements of the model hang on very thin lines. Check out other Christmas models:
Remix of Rotating Rings Toy where I added some hexagonal holes converging towards the center of the model to add some character and give some texture to the rings making them a more tantalizing tactile experience. Created fresh model in…
Print with Z=0,2 PLA or PETG You can use it without ball bearings, but for the best performance, SILENT version you need 12pcs 5mm bearings. Buy here: https://www.amazon.de/-/en/sourcing-map-Stainless-Bearing-Precision/dp/B09FDL8YHB/…
Dodge Charger 1969. Assembly required. Can be printed separately Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of…
Introduction The circular expanding table idea is very old for example the “Jupe table” patents are from the beginning of 19. century. But I have not seen a 3Dprinted working scale model of it so I made one :). The idea has been in my…
This is a clock where, instead of having linear hands, the entire clock face rotates. This produces interesting geometrical patterns throughout the day as the two hands intersect at various angles. It is intended to be more difficult than…
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model in multiple colors produces…
We have already printed various stands for earrings and rings. Unfortunately, my wife didn't like them. For this reason, we created this beautiful rotatable and expandable stand together. All modules can be rotated. The individual levels…
Nothing really to say, just a pretty rotating organizer. Printed with e-sun ePLA pink-matte. Took quite long to print (around 15 hours), in the future I will probably add a vase-mode alternative.
These are non-marring TPU endcaps that slide over the top and bottom of happymaker 's Adjustable Height Support model. The bottom prevents the base from slipping and the top prevents the part from scratching the lifted item. There is a…
Check out other Christmas models:
In the images, there are great results with tri-color filament and putting gold layers as the two layers on the outside section. The layers are explained in the table below. Reference the picture for the 180 twist for the middle layer. It…
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model in multiple colors produces…
A heavy duty headrest hook to keep your groceries, shopping bags, iPad, purse, and more secure in your car or automobile. Features: Heavy duty hook. Rotating latch to avoid accidently knocking the hook from the headrest bar. Instructions:…
This Rotating Rings optical illusion sits on a record player and spins. It gives the impression the rings are spinning on top of each other, rather than just rotating in place. I designed this after watching Steve Mould's video about his…
Round components can be lasered with this ratation system. I made this model for a friend, it is based on the " Rotary Axis For Diode Laser " from "ThothLoki". According to his own statement, the model contains some problems, therefore I…
Deathly Hallows as a rotating print in place pendant. Print Settings Print it with a small nozzle / layer height to prevent as much detail as possible. A 0.4 mm nozzle is more than fine. Use supports on build plate only, they should…
I am learning to use Fusion 360. I know there are many rotating ring fidgets out there, but another one doesn't hurt! This is small, 38mm or 1.5 inches in diameter. Spins nicely with wide enough gaps for printers that don't have a tight…
🍃 Rotating Wind Chime – Tree of Life – 3D Printable Bring movement and calm to your outdoor space with this rotating decorative wind chime , designed specifically for 3D printing . Inspired by the Tree of Life , this kinetic ornament…
This is a Motorized Rotating Drying Rack used for getting an even coat of the sealing epoxy used on fishing lures after painting. The use of epoxy to seal lures is common practice but if you use a thin epoxy's like EnviroTex's Lite…
Transform your daily wellness routine into a seamless, high-design experience. Ditch the clinical, translucent plastic look for a medication organizer that actually looks good on your nightstand or desk. This 7-day pill planner features a…
Dieser runde Pinselhalter bietet eine übersichtliche und platzsparende Aufbewahrung für deine Malpinsel. Durch die vertikale Anordnung bleiben die Pinsel ordentlich sortiert und gut zugänglich – ideal für den Hobby- und Profibereich. Die…
Turntables are used to display products while being rotated 360 degrees. There are so many variants but none was suitable for what I needed. So I designed my own. Software download:…
A simple multi-piece print-in-place heart that rotates within itself. Two versions included, one with an embossed name, and a blank file too. Print instructions Highly recommended to print this with a raft as any elephants foot on the…
Needed a space-efficient way to organize my ties and belts, so I designed this after seeing something similar being marketed in an online search. The hanger has a carousel that can be rotated to make it easy to consider what kind of…
I was thinking about picking up a Panavise to help with some of my soldering and other project work, and then decided to try to model out something that could be 3D printed instead. My goals were to create a vise that felt nice and smooth…
Print in .2 layer height dont enable support
You have to lead the ball towards the exit through a rotating mechanism, solving the two layers at the same time. Twice effort for your brain in this endless days. I would rate the difficulty of the puzzle 7/10. Print instructions Check…
I modified LinkDesign's amazing RotaRings model because I had issues with the original in terms of printing and stability, mainly due to the Print-in-Place axles. While I was at it, I also made the outer three rings slightly wider, which…
Reupload from Makerworld , made by TimothySt : Adaptation of BradFTBT3D 's great design. I was annoyed that the display only turned in one direction, meaning once you miss the desired swatch you have to circle all the way around to it…
Thanks again to rosch8 for the great original wind turbine! I've already done a few remixes, this rotor blade design achieves very impressive speeds. I added a second counter-rotating rotor to my remix. Of all my wind turbines, I like…
Seems every rotating thing on Printables needs a stepper motor and a programming degree so I made something that needs just 2 mr128 bearings and the rest can be found in the junk drawer. Wrap the wires around the built-in battery holder…
Remixed version of the keychain stand by @ @NickR1983_763876 . I modified thickness of top part, increased no of keychain slots, and modified tolerance between top part and middle rod. Compact Design: The stand is designed to be…
I really liked the phone holder by E. Soderberg, however found the placement options for myself lacking. I am very ADHD so a lot of stuff tends to fall for me, therefore I prefer things that can be attached to my table. I made it rotating…
This is a clone of the excellent Rotating Rings Toy model by Marvin. “medium_4_shells.stl” is very similar to that model. I wanted to print a toy with more rings, and soon found that an even gap throughout the model put a limit on how far…
Nintendo switch rotating game case made on a 3D printer! This design is flashy and will impress your friends while providing great functionality! Update 12/4/21: Added missing screw cover. Update 5/12/22 Note, rotator lock should be…
Print with supports, I used .12 layer size for better detail. I only printed a palm sized one, but it should scale up fine as needed. This is v1, I plan on making the turret rotate next, then adding opening doors.
Notice - make sure to use Arachne wall generator or enable printing thin walls setting in your slicer, as some elements of the model hang on very thin lines. Check out other Christmas models:
A rotating display stand. At first I set out to design a coil wounded display stand. However, after I printed the coil, I realized that I am winding it up manually. And since that is the case I might as well just scrap that whole idea and…
![Multi-Layer Rotating Rings [Single Extruder, No MMU]](https://media.printables.com/media/prints/1116868/images/8436648_57e3eb31-5416-4c62-96d5-8f7b6a244d45_fbec544c-3120-415d-a502-4816ae87c15d/rotatingmulticolorrings.png)
