970 modeli
This simple stand is designed specifically for the Puffco Proxy vaporizer. It securely holds the Proxy while keeping it steady and upright, when not in use and on display. The stand is compatible with the stock Puffco Proxy glass,…
Wydruk około 1,14 €–1,39 € nettoWstępna wycena jednego wariantu
First of all thanks to krom for the beautiful original model and sharing the f3d file. You should print the watering can with PETG . With PLA there is a risk that the can will leak. I printed with 100% infill to be on the safe side. It…
Wydruk około 12,76 €–15,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Austausch-Gleitschiene für den Winkelanschlag der Proxxon FET, um das übermäßige Spiel zu reduzieren. Benötigt wird neben dem 3D-Druckteil noch eine 24mm lange Gewindestange M4 für den Feststeller. Ich habe in die Bohrung vorab Gewinde…
Wydruk około 1,48 €–1,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Sigma ROX4 Speedometer Holder for fix with cabel ties
Wydruk około 0,45 €–0,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update 2024-11-17: After ~3 years of near daily use, it broke. I've made a few subtle updates to the model that should both strengthen the fracture point, and clean up a model a bit. I had used an older design daily for a year, before it…
Wydruk około 0,27 €–0,32 € nettoWstępna wycena jednego wariantu
This is a compact countertop knife block to keep your Victorinox Fibrox 3.25" paring knvies organized. These are fantastic little knives, they are easily sharpened, take a keen edge, dishwasher safe and are dirt cheap to replace if you…
Wydruk około 12,54 €–15,33 € nettoWstępna wycena jednego wariantu
EN: It was one of my first tinkerings for my Proxxon machines and I had downloaded the print files from Thingiverse at the time. What bothered me, however, was that you had to unscrew the cap nut on the drill head on the machine to expose…
Wydruk około 9,34 €–11,41 € nettoWstępna wycena jednego wariantu
Theses are gauges for easily set the support at usual angles. Make sure your printer is on the corner ! Print Settings Printer: Any Rafts: No Supports: No Resolution: 0,2mm Infill: 25% Notes: Verry simple to print. Make sure your printer…
Wydruk około 0,57 €–0,69 € nettoWstępna wycena jednego wariantu
Onychodictyon Ferox was a worm-like creature that lived in the Early Cambrian period, about 525 million years ago. It's considered a lobopodian, an extinct group of worm-like animals with stubby legs. Here are some key features of…
Wydruk około 8,33 €–10,18 € nettoWstępna wycena jednego wariantu
allows you to use your Proxxon Micromot 50/E as spindle for the Alfawise C10 engraving machine. The adapter has a 45mm outside diameter and might also fit other engravers. There are two adapters which can be used independently. One mounts…
Wydruk około 2,99 €–3,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model is supposed to expand the use of the ProxMark3 Easy by making it more common in your work environment. 🏢 I need to say, before installing the ProxMark3 Easy on the model, you should first remove the middle layer of the…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
Dual Toothbrush stand / holder for Phillips Sonicare + Curaprox interdental brushes (from the set - one square, one round) Also has a slot for Elmex gel (or small toothpaste 10-25ml) OR you can download a model without the slot.…
Wydruk około 1,86 €–2,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printed with PETG. The part has +0.2mm tolerance on every fitting surface. With my Ender 5 i got a tight but makeable fit. Some fiddling is required to insert the screw of the original part into the print. It will cut its own threads into…
Wydruk około 0,15 €–0,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This repair module for the Sigma ROX bike computer can be glued onto the device if the tabs of the quarter-turn mount are broken. Tested with Sigma ROX 4, but should be compatible with ROX 2,7,11,12. Please comment if you have tested it…
Wydruk około 0,44 €–0,53 € nettoWstępna wycena jednego wariantu
This is designed to print without supports up to a maximum layer height of 0.2mm. I printed on PETG with a 0.4mm nozzle. Note that the model has a notch marker to indicate the front side. This is important when connecting the adapter with…
Wydruk około 0,34 €–0,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Low cost (0.10 $US) Enclosure for Adafruit VCNL4040 Proximity and Lux Sensor to allow for handling, use and mounting of the sensor.
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
2 (4+) models to make cover of steering wheel center for Zetor Proxima, inner diameter 55mm, outer 62mm. I use ASA for black pieces and PETG for color logo and font, models also contain plate to visually present position of each gear.…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Toller Aufsatz zum tropffreien Ausschenken aus einer Metrox oder Benta 2 Liter Milchkanne. In den Deckel für den Ausguss passt ein Gummi-O-Ring 31.34mm x 3.52mm, den man im Baumarkt im Sanitärbereich kaufen kann. Ich empfehle, mit ABS-X…
Wydruk około 3,94 €–4,81 € nettoWstępna wycena jednego wariantu
Esta es una cabeza de jugador del videojuego Minecraft, esta cabeza pertenece al jugador Ainatrox, que es mi skin. En un futuro puedo crear skins de otras personas o mobs del juego, cualquier petición es bienvenida, en una de las imágenes…
Wydruk około 0,33 €–0,41 € nettoWstępna wycena jednego wariantu
Welcome, and thank you for choosing my model. I will provide some context for this model. This custom-made storage box is specially designed for Proxxon saw blades with a diameter of 50 mm. The box is 3D-printed and equipped with a…
Wydruk około 3,98 €–4,87 € nettoWstępna wycena jednego wariantu
This adapter accommodates two regular Curaprox brushes, two singles (CS 1006/1009), and four interdental brushes (UHS 470 holder). Print with the sample cup or adapt to your size of toothbrush cup (the one in the photo is a generic IKEA…
Wydruk około 1,62 €–1,98 € nettoWstępna wycena dla PETGMateriał u źródła: PET
" Anycubic Key " 2 Tools in One Extruder Tension disengage tool & Proximity Sensor height tool. Disengage tool allows you to disengage extruder tensioner. Gives you the ability when you load your filament all the way without having to…
I love the official models, but I also love to make custom-themed terrain pieces for whatever weird concept I have for an army. This can be hard with the weird shapes the company uses for these pieces, so here is a stencil project to help…
This set of easy to print parts makes a nice and well working router out of your Proxxon multi tool. It should fit for all similar tools that have a 20mm diameter metal clamping base. The height of the router bit tip vs. the base plate…
Works great, 60 mm wide. Print instructions When assembling turn nut M6L counter-clockwise.
I don't play League of Legends, but this design was requested by a friend who does. The sword also looks pretty cool, so why not? I printed this flat-side down with PLA in a 0.2mm nozzle and 0.08mm layer height. Although the details on…
made using 3 views from the internet I didn't have accurate fuselage and wing sections so everything is just an approximation, maybe someone that has foaming filament can use it to make an edf rc plane out of it
YOUTUBE video showing the use of this 3d scanning frame: Improved LARGE version of my scanning frame v2 which is working great using RaptorX in parallel laser scanning mode. Motivation for designing this 3d scanning frame: Object can be…
This is a Proxinity Alarm from Tom Clancy's Rainbow Six Siege. Since the file download of Thiniverse is bad, I included "R6PA_All_Files_ZIP.ZIP" to download all files at once. You're welcome. It was modelled in Fusion360. F3D files are…
Human knee. The model is created by conversion from CT scans, i.e. from DICOM files to stl file. Printing is necessary with supports, organic ones are recommended.…
Though by design in order to keep bulk and weight to a minimum, the original model was quite flimsy and susceptible to breakage (especially when interacting with the button). Note : There are two versions of the “Slim” case that…
This case is designed to fit the Proxmark3 Easy (from Aliexpress or dangerousthings) like a glove. As such it has pretty tight tolerances. Print it standing on the “nose” with a 0.4mm nozzle. Walls are 0.8mm so it basically only consists…
We are currently building two armies for playing OnePageRules: Age of Fantasy. There are a lot of models available. However, I wasn't able to find fitting proxies for everything. So, this is my take on the 'Ghost Swarms'. Six small ghosts…
Description Proxxon combination wrench holder including versions for both Küpper and Skadis Pegboards. In order to save space the wrenches are placed sideways. Each wrench size is displayed to the left of the wrench. Available models…
PLA Settings that prove to work: *0.2mm layer height *20-25% infill (cubic or gyroid) *3 walls/perimeters for strength and visual appearance (not necessary, just suggested) This is designed to print without supports. Pairs best with the…
These four characters are NOT the characters from Zombicide: Toxic City Mall but somehow look comparable, so you could use them! The character sheets are available on the original zombicide website:…
An alternative proxy marine design for the community. I wanted to create something a bit more modular, and down the road I'll produce more front armor plates for alternative looks, such as a skull decoration or ammo pouch. Follow for more.
Sometimes it is practical to use the ProXXon IBS/E to cut thin pipes or rods. And it would be nice if this could also happen at an angle of 90 °. So I did a remix of the cool tool published by GreaseMonkey88 to cut small diameter rods or…
Belt buckle quick release, Print with 80% infill for more strength in the locking tabs.
------------------------------------------------------------------------ List of released EOS rotor designs (subject to be actualized frequently) EOS_01 rotor design → this post (…
Router base for proxxon dremel (Proxxon Feinbohrschleifer FBS 240/E). Will fit other dremels with a 20mm diameter for attachments. Uses a M4 screw and nut to secure the dremel. I still recommend to also grab the dremel during use and not…
Fits a smaller head. Recommend using a heat gun on low temperature to make slightly wider and adjust to your head size. Two holes on each side meant for elastic material for wearing. Thinking of working on other Ninjago models, let me…
This is an older project I have finally got round to uploading! A drill press stand designed to fit the Proxxon Micromot 60E/F. It also gave me a chance to try out my laser cutter at the time. Unfortunately there isn't much in the way of…
I love the official models, but I also love to make custom-themed terrain pieces for whatever weird concept I have for an army. This can be hard with the weird shapes the company uses for these pieces, so here is a stencil project to help…
I love the official models, but I also love to make custom-themed terrain pieces for whatever weird concept I have for an army. This can be hard with the weird shapes the company uses for these pieces, so here is a stencil project to help…
Case for ESP32 board with external BT/wifi antenna I used as BT proxy from home assistant. Board I used is AZ-Delivery ESP-32 Dev Kit C V4. I re-purposed an ipad usb-c charger and micro usb cable. I'm sure there is a nicer and less…
I love the official models, but I also love to make custom-themed terrain pieces for whatever weird concept I have for an army. This can be hard with the weird shapes the company uses for these pieces, so here is a stencil project to help…
This is completely redesigned toolhead cover for the Centauri Carbon series that improves on print quality, durability and noise. Now also supports CC1 Canvas and CC2 ! Key improvements Lightest toolhead cover available with good center…
This is just my take on the commonplace hinged rugged box design. They're all much of a muchness, and mine was VERY loosely based on Yanev's design: https://www.printables.com/model/39729-tool-box-parametric I literally just made an…
I remixed this from a cool model by @swagineer so that it could be held by a Dummy13 model.
I needed to cut holes for speakers but also to carve notch for speaker edge to fit in. As I did not have proper tool for that job I had to make it on my own. As I already had cutting guide adapter for my Proxxon grinder I decided to make…
Garmin/Sigma Rox 11 mount above stem Again another Gramin / Sigma Rox 11 mount for a handlebar diameter of 31.8mm. I Designed this for my own needs (fits perfect over a canyon v12 stem) so i hope it fits for you. It's easy to Print but…
Anycubic didn't include that tool with Kobra 2 Pro, so i made my own. Dimmensions are equal to original part. Print Settings Printer Brand: Anycubic Printer: Kobra 2 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0,15 Infill:…
I love the official models, but I also love to make custom-themed terrain pieces for whatever weird concept I have for an army. This can be hard with the weird shapes the company uses for these pieces, so here is a stencil project to help…
I created this to be tall enough to hang the wand in the front and store the refills inside. There are two versions: 1. A 300mm tall version that would require an appropriate printer (XL, Voron 2, etc.) . The one pictured was printed on…
Wall holder for 15 combination wrenches (6mm to 21mm). Numbers indicate the wrench width, suggested to print in separate color. The Proxxon SlimLine kit fits perfectly. Includes three mounting holes (4mm Spax). I printed with a 0.25mm…
I wanted to build a cheap and accurate CNC mill, to engrave and drill simple PCB boards. The build is using easy to get components (mostly 3D printer parts), and some printed parts. The plan was also not to make any irreversible changes…
Here's my proxy model for the Frosthaven summon, the Wraith! This could be used fairly well for the OG Gloomhaven monster, the Living Spirit, or even for any sort of wandering spirit in a DnD game =) The chains needed a ridiculous amount…
Here's my proxy model for Alienoid from the King of Tokyo board game! This guy was a real challenge to print because of those segmented tentacle leg things. I typically avoid using top connections when designing my supports, but they're…
Fully 3D printed table saw sled for the mini Proxxon KS 230. Parts: Sled Runner Guide Nut Railnut Lever Stop Fasteners (not 3D printed :-) 1x M3x20 socket head (fully threaded) 1x M4x25 socket head 2x M3 hex nut 1x M4 hex locknut The…
Inspired by the multi corner cutter offered by https://www.shiftinglands.com/ I decided to make something similar for myself. I also added a circle shape that allows me to cut circles as well. Some assembly and non 3D-printer work is…
Proxxon MF70 CNC kit The Proxxon MF70 milling aluminum: https://www.youtube.com/watch?v=0W1iQ1PUNVY Following improvements/changes have been made compared to the design of ttsalo: full x-axis table range is now available. Using the ttsalo…
It can be simply printed without support. Ventilation holes help drying. Only 2 neodym magnets needed (2x3x7mm) to hold both sides together. Recommended 100% infill and layer height 0.15mm. Use Prusament PET-G, because it is the best…
PROXIMITY_45 An alternative shroud with many advantages. Replacing the fan shroud requires removal of the printhead from the gantry and unplugging connectors from the PCB. The solder connections of the PCB mounted JST connectors are…
Here's my proxy model for the Frosthaven monster, the Algox Icespeaker! This guy needs a fair amount of support, especially under the axes. Make sure that you also get his upper fangs and a bit of his right horn! As always, the .blend…
Print laying flat using supports for best strength along the tool, see example slicer picture. Printed in PETG, 4+ Walls.
Here's my proxy model for Gigazaur from the board game, King of Tokyo! I had to separate the head to get it printed because of the teeth, so I included versions with the head attached and without. I put the model on a 50 mm base, which…
Hey everyone - here's my proxy model for Meka Dragon, from King of Tokyo! This guy is the sixth and final core kaiju from the game, so the set is finally complete! As always, the .blend file and any pre-supported .3mf (including the one…
15-20% Infill (Dependent on selection for reliability but mainly preference) 20-30 Degree TREE Support Recommended (30 may involve excessive support removal) Scale is ready to print though models with more thin areas could do with scaling…
There are a number of Stompa proxies out there but none of them had that 2nd Edition vibe, so I designed my own. It's very similar to the original but not an exact copy. Many thanks to reddit user Marcus_Machiavelli for measurements from…
An other mount for my Sigma Rox 11 (Garmin Base). This time for the Canyon G5 Stem . You need two M3 countersunk screws ... i used my dermel to shorten them. Design is basd on an other mount from Lars Vogelenzang but build from scratch.…
edited model with pocket clip screw hole
Here's my proxy model for Space Penguin from the board game, King of Tokyo! I put the model on a 50 mm base, which fits perfectly in the Tokyo or Tokyo Bay circles on the board =) As always, the .blend file and pre-supported .obj (the one…
extra m3 nut and 4 or 6mm bolt are required. sensor position stays the same, no probe offset correction is required first version will fit better but it requires supports – see attached screenshots on how to place them
I love the official models, but I also love to make custom-themed terrain pieces for whatever weird concept I have for an army. This can be hard with the weird shapes the company uses for these pieces, so here is a stencil project to help…
Here's my proxy model for the Frosthaven boss, the Fish King! I was so happy with how the net worked out for the Herder that I figured that I should go ahead and include one here, too. Since capes look really cool on miniatures, I figured…
I love the official models, but I also love to make custom-themed terrain pieces for whatever weird concept I have for an army. This can be hard with the weird shapes the company uses for these pieces, so here is a stencil project to help…
Here's my proxy model for Cyberkitty from King of Tokyo! I got to use a lot of the techno-greeble techniques that I learned for the Alienoid proxy, but really turn them up to 11 here, which was really fun =) Printing this model was a real…
Different tools for the Proxxon PS13, best printed in resin, not sure about FDM. I use 3M 2-5-468MP doublesided tape to stick regular dry and wet sandpaper on the tools. For the round one I use round die punches and for the triangle I use…
Se imprime en PLA con la parte de los orificios apollada en la cama, con un 15% de relleno es suficiente.
Fence for Proxxon MBS 240 I printed it in PETG, but a stiffer filament is recomended. Uses a M5 Heatinsert and a M5x30 Screw with an 8mm Hex Head.
Roxon Flex Companion Scale with slot for victorinox pen, tweezer, tortoise gear ferro rod and pin. As well as needle slot. Pen and pin slot remain original, modified tweezer slot location and added extra ferro rod slot as well as needle…
1mm height recommended. I'm the best!
Print with PLA or PETG, only 1mm of clearance so warping could prevent fitment. Update: Redesigned for 5x3mm neodymium magnets, just glue them in place (they have to sit flush with the contacting are). 5x1mm magnets weren't strong enough……
Here's my take on the Frosthaven monster, the Algox Snowspeaker! The artwork for this guy has him looming up like a genie from a swirl of snow, so I decided to really lean into that image with my model. I hope you enjoy it! As always, the…
Tool for bypassing Xerox door interlock switches. A must-have for performing repairs on any Xerox production press. Compatible with most Xerox interlock switches 8 minute print No post-processing F3D file included Recommended settings: No…
Designed to fit a Victorinox boning knife, model number 5.6603.15 with the Fibrox black handle. If you want the TinkerCad link, let me know. Prints with the flat side down, no supports. 0.2mm layer height works fine, but I ended up going…
This is a redesign of my Slim Case. The original stayed true to the shape of the PCB, but that made the HF-Part a bit hard to use with cards at times. The HF-Cards also don't need to be that close to the Antenna, so I just extended the…
Diese Schärfvorrichtung habe ich in einem Video eines sehr geschätzten Youtubers gesehen, den er von einer ebenfalls sehr geschätzten Firma hat. Hier ist meine Variation davon mit fixem Winkel zum Hinterschliff des Freiwinkels. Ihr könnt…
Filament leftovers trash / recycle bin (approx. 100x100x200mm). Have fun to print ;)
Hey everyone - here's my model for the Frosthaven Algox boss! I'll avoid saying too much about the model in order to avoid any potential spoilers, but I just want to give some quick printing advice: make sure that there's some support…
Make way for the winner! This is a detailed, fan-art figurine of Roxanne Wolf (Roxy), the fierce and competitive wolf animatronic from FNAF: Security Breach . This model is provided as a single-color STL, designed to be a perfect project…
Here's my proxy model for The King from the board game, King of Tokyo! I put the model on a 50 mm base, which fits perfectly in the Tokyo or Tokyo Bay circles on the board =) As always, the .blend file and pre-supported .obj (the one that…
Here's my proxy model for the Abael Herder! I included two versions of this model, one with a bone helmet that's a bit closer to the artwork, and one with a bandana. This model pretty much requires SLA or a 0.25mm nozzle (or smaller) for…
Hey, this is a free Dreadnought Proxy. Supported files are not included.
This tool is a auxiliary tool for grinding drills with a proxxon TSG 250/E plate grinding machine. The tool is inserted into the rail so that the angle matches the drill. For easier printing, the template is divided into two parts
Here's my model for the Frosthaven Boss, the Lord of Chaos! I made it as self-supporting as possible, but there's still several outstretched limbs that're gonna need supports. Fortunately, none of the “interior” of the model has overhangs…
Simple design to hold a Proxxon Micromot 60 rotary tool. It holds the 12V power supply adapter and all accessories which come with the “ Model building and engraving set with Micromot drill/grinder 60/E ”. The collets holder can be slid…
12/20/2025 update: I've added a v2 of the model that should be easier to print. I've also increased the sizes of some of the details on the model to make them easier to paint. Here's my proxy model for the Frosthaven summon, the Skeleton…
