Wyniki wyszukiwania: saw

Sortowanie

3779 modeli

P
PrintablesTimo

Track Saw Fence

Attachable Fence for tracks/guides from Festool and Makita for 90 degree rip cuts. One can attach a piece of plywood at the reference edge for a longer fence. Print instructions PLA 0.3mm layer height 3 perimeters 20% infill (gyroid)…

Pobrania
3497
Polubienia
518
Ocena
4,68
P
PrintablesART TOO

SAW HANDLE - MINI HACKSAW - (Tested)

Easy to use mini hacksaw, No screws needed only a gentle push

Pobrania
1721
Polubienia
607
Ocena
4,93
P
Printablesdjedje_zr7

Handle for hacksaw blade (U2)

Garage Set 8 : Handle for hacksaw blade Update : U1 : Screw with little head U2 : Nex Gcode and print successfully Please vote for me !!! Dje See also in pratical contest: Bathroom Set :…

Pobrania
1575
Polubienia
444
Ocena
4,83
P
PrintablesMiguel M.

DeWalt Miter Saw Zero Clearance Insert

This is a zero clearance insert for Dewalt miter saws. I modeled it from the insert on my own saw wich is a DW716 (12inch, dual bevel, NON sliding) from what I can tell from the replacement inserts on amazon, this will fit models:…

Pobrania
1511
Polubienia
268
Ocena
4,91
P
PrintablesThomas

Ultimate Jig Saw Handle

Jig saw handle with container for blades Fits perfectly to Bosch blades Screw cap to avoid to loose blades The container accepts more than 8 blades Secured manipulation with screw tightening ring All parts are fully printable. The handle…

Pobrania
1031
Polubienia
254
Ocena
4,96
P
PrintablesDrAl

Track Saw Waste-Side Kerf Jigs

Waste side jigs for track saws / guide rail saws / plunge saws. These are used when you want/need to have your guide rail on the waste side of the line. If you put the splinter guard up to the line on your workpiece, your workpiece will…

Pobrania
1019
Polubienia
176
Ocena
4,86
P
Printableserispe

Sphere Jigsaw Puzzle

As a modelling challenge for myself I made a copy of a wooden puzzle I bought on Amazon some time ago. It seems to be a classic design found in many toy puzzle collections. In orderr to make this print without any supports I separated the…

Pobrania
1012
Polubienia
188
Ocena
5
P
PrintablesLittle_Leo

Chainsaw Holder Wall Mount / Stihl Husquarna Dolmar / Stihl HSA - MSA / Gerätehalter / Tool holder

Dieser Halter ist für eine Motorsäge, Heckenschere oder auch andere Geräte gedacht die hängend gelagert werden. Für eine gute Haltbarkeit sollte die Füllung mindestens 80% betragen. Viel Spaß beim drucken. Bitte geben Sie mir noch ein…

Pobrania
892
Polubienia
87
Ocena
0
P
Printablesian123411

Dewalt DCS391 Circular Saw Holder/Hanger

i made a hanger/holder for my dewalt DCS391 circular saw it has 15% infill and 4 perimeters just retract the blade up as high as it goes and place it in the hanger whilst pulling the guard back

Pobrania
880
Polubienia
122
Ocena
5
P
Printablesmaxmar

Adjustment Jig for DeWalt DWE 7492 and DWE 7485 Table Saw

This is an adjustment jig for the DeWalt DWE 7492 and the DWE 7485 table saw. The set consists of multiple pieces for the adjustment of the fence and the blade relative to the miter slots of the table. Please pick the right extension…

Pobrania
797
Polubienia
122
Ocena
5
P
PrintablesFlexi-Maker

Gravitrax seesaw

Kompatible Gravitrax Wippe Kleine Feinarbeiten durch schleifen notwendig.

Pobrania
733
Polubienia
129
Ocena
4,2
P
Printablesgwendal

track saw fence with 45 degree angle

The fence size is the same as Timo's, but allows cutting at -45, 45 degree angle. In addition: Added .1 mm to fit more easily Add lock mechanism with 2 M3nS nuts and 2 M3x14 bolt (from the MK3S+ Fasteners spare bag) to lock the track. The…

Pobrania
696
Polubienia
125
Ocena
4,8
P
PrintablesDrAl

Track Saw Parallel Guide Extension Set (Makita)

Repeatable rips with the Makita track saw. This is a remix of @cewo's excellent parallel guide design: https://www.printables.com/model/285295-makita-track-saw-parallel-guide-extension-set Changes in the remix: Changed to using 19 mm (¾")…

Pobrania
671
Polubienia
167
Ocena
5
P
PrintablesFestool

Festool Saw blade holder

Festool Saw blade holder – simplify your tool management Where do you currently store your saw blades? Print your own Festool saw blade holder and make your everyday work easier and more productive. Don't have Festool saw blades yet?…

Pobrania
638
Polubienia
113
Ocena
5
P
Printables3DDIY

Festool Track Saw Kerf Jig for TS75, TS55 and TSC 55K

This jig is to help align the track to leave the exact amount of spacing for the kerf of the blade. This is used if the waste board is to the left of the track and what you need is on the right. Festool saws have different widths so use…

Pobrania
571
Polubienia
102
Ocena
4,86
P
PrintablesM2PK

Single Screw Sawtooth Hook (saw tooth wall frame hanger)

Recommended printing settings (or download gcode): Infill: 80%+ Brim = enabled Supports = Everywhere Orientation: see image This 3D-printed sawtooth frame hook is designed to provide a secure and stylish way to hang your artwork using…

Pobrania
550
Polubienia
100
Ocena
5
P
PrintablesNozzle

Table saw Blade Alignment Dial gauge holder Fusion360 Model

Einstellhilfe für Tischkreissäge wie z.B. Metabo TS254 oder Bosch GTS 10 XC Die Grundplatte mit der Messuhr läuft mit einem Gleitstein in der Nut des Tisches. Damit kann das Sägeblatt parallel zur Nut oder der Schiebeschlitten parallel…

Pobrania
477
Polubienia
62
Ocena
4,67
P
PrintablesMiguel M.

Bandsaw insert (Grizzly G0555, King industrial KC-1433FXR, King KC-1401FX)

I designed this for my King Industrial 14inch band saw model KC-1433FXR, It also fits Grizzly model G0555 bandsaws as these are the same bandsaws with different branding…. This has a much smaller slot that lets you get in close with small…

Pobrania
363
Polubienia
51
Ocena
4,67
P
Printablesjlennox

Ridgid R4512 Table saw zero clearance throat plate (R4520?)

This is a zero clearance throat plate for Ridgid R4512 table saws. These may or may not work on R4520 saws? I believe they are the same but I do not own one to verify. Because the print is too large for most printers, it must be printed…

Pobrania
360
Polubienia
52
Ocena
0
P
PrintablesMiguel M.

Better Bandsaw Dust Collection System. King Industrial (2 part, magnetic)

Dust collection is a difficult challenge with any bandsaw. Mine is a King Industrial KC-1433FXR and came with a very inefficient and essentially useless dust collection solution so I came up with this 2 part dust collection duct that is…

Pobrania
359
Polubienia
79
Ocena
5
P
PrintablesDude

Track Saw Fence i3 Print

This is the print setup file for the track saw fence with the STL rotated so it will print on its back. The skirt must also be disabled or the print will be out of bounds.

Pobrania
354
Polubienia
41
Ocena
3,5
P
PrintablesArchipel

Felling wedge chainsaw saver + video

Is it a quick print? Yes! Is it solid enough to work? Also yes with the good parameters! Is it a very low cost accesory that will save your saw and improve your safety? Still yes! Check the short tree falling video below to see! I didn't…

Pobrania
325
Polubienia
78
Ocena
5
P
PrintablesSASSy Design

Chainsaw Plant pot and Planter - Vase mode design

Be careful with chainsaws! But... this one might be pretty safe to handle. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print)…

Pobrania
317
Polubienia
80
Ocena
4,67
P
Printablester

Dewalt Table Saw DWE 7485 to 2 1/2" Hose Elbow

An 90 degree adapter to connect a Dewalt DWE7485 Table Saw (65mmOD) to 2 1/2" (ID) Clear PVC Dust Collection Hose, created in Fusion 360. Please note that the print time could be reduced by manually optimizing the print supports (in…

Pobrania
306
Polubienia
51
Ocena
5
P
PrintablesKimframes

Stackable circular saw blade holder

For saw blade sizes with diameter up to 190mm, thickness up to 4.2mm and 30mm bore.

Pobrania
273
Polubienia
34
Ocena
0
P
PrintablesDerLift

Nosey Jigsaw Puzzle

I color-coded the pieces to make the solution easier to visualize. I also used some leftover filament colors. The tray has a color change at a height of 3 mm, so no supports are needed. It was printed with standard settings on my Prusa…

Pobrania
268
Polubienia
44
Ocena
5
P
PrintablesJessR

Hacksaw handle

Check the model here: https://a360.co/3GXgjM9 BOM: 3 x M4 x 10 mm 3 x Hex nut M4

Pobrania
249
Polubienia
24
Ocena
5
P
PrintablesAllpa

Rail-Adapter for Milwaukee M18 FMCS metal circular saw / Schienen-Adapter für Milwaukee M18 FMCS Metallkreissäge

I love the little Milwaukee FMCS cordless circular saw, not only for metal, but also for wood! But unfortunately there is a problem: Milwaukee does not offer a way to use the saw guided on the rail for whatever reason. To finally solve…

Pobrania
231
Polubienia
53
Ocena
5
P
PrintablesAndr34

Dewalt Table Saw (7485 / 7492) Curved Adapter to 40mm Hose

This adapter is curved so you can use inside a wood table and use a vacuum with 40mm hose. Curved prints are hard to print without support so I added also gcode with tree support as I have printed it. You can move printed part also when…

Pobrania
210
Polubienia
23
Ocena
0
P
PrintablesJan Drda

Sawyer Water filter to Nalgene Bottle and Helikon Bottle - Universal Filter Adapter

Water filter Sawyer to Nalgene Bottle and Helikon Bottle - Universal Filter Adapter. Inspered by hweat model. Modelet a

Pobrania
196
Polubienia
40
Ocena
0
P
Printablescrashkg

10" Rikon Bandsaw Zero Clearance Insert Model 10-3061

A Zero Clearance Insert for the Bandsaw. Model Rikon 10-3061 10" Bandsaw with better dust collection. I included the f3D to be able to change the size to fit your own bandsaw. Edit 3/31/24: Added 2 files for 6mm longer cut length in the…

Pobrania
194
Polubienia
28
Ocena
5
P
PrintablesKaffeemaschine

Japanese saw magnetic miter jig for 45° cuts

The model guides saw blades along two sides, which are designed to hold magnets with a diameter of 8mm and 3mm depth. The holes have a tight fit, if it comes to loose, the magnets can also be glued in place. It has a grove which can be…

Pobrania
189
Polubienia
49
Ocena
5
P
PrintablesTakehiko

Delta Band Saw Insert

This is a zero clearance insert for a Delta Rockwell 14" band saw. It was modelled on a 1950 model, but should fit a wide range of vintages. Fusion 360 model file is included if you need to tweak it.

Pobrania
183
Polubienia
25
Ocena
4,75
P
PrintablesMatt Beechan

Table Saw Miter Slot Runner (SawStop)

After a couple seasons of expansion and contraction on my hard maple table saw miter runners, I needed a solution that would be consistent season to season. These table saw runners for SawStop miter slots were designed to fit on the MK4S…

Pobrania
168
Polubienia
40
Ocena
0
P
Printablesjoh

Bosch GCM8SJL circular saw vacuum hose adapter for Miele

Based on layershifter's adapter , remixed in Tinkercad. If you want to customize it, head over to Tinkercad :)

Pobrania
155
Polubienia
28
Ocena
5
P
PrintablesAShop.sk

Sawhorse Hanger for TOUGHBUILT C550, C600, C650, C700

This is specifically for the TOUGHBUILT C550, C600, C650, C700 sawhorses. Držiak pre stavebné kozy TOUGHBUILT C550, C600, C650, C700. TOUGHBUILT C550 TOUGHBUILT C600 TOUGHBUILT C650 TOUGHBUILT C700

Pobrania
154
Polubienia
25
Ocena
5
P
PrintablesMatt Beechan

Low Profile Sawtooth Picture Frame Mount

Sawtooth picture hanging bracket with a slim 3mm profile. Designed to be attached with 2 - #4 flat head screws. The bracket is 40mm wide and 8mm tall, with a 1.5mm recess to afford for the nail head. This model was designed for 3D…

Pobrania
146
Polubienia
23
Ocena
5
P
Printablescrashkg

Bandsaw Template Guide

I wanted a guide to help me use the bandsaw to cut out curves more accurately. Instead of following a line drawn on the wood I place a template on the surface, the guide follows that template exactly. This uses 1 Magswitch GripRight 90…

Pobrania
146
Polubienia
57
Ocena
5
P
Printablesishikawats

Lego Hand Saw

Printing Tips Tiny model, use 0.2 mm or less layer height. Ironing with All top surfaces was an improvement for me. Make sure bed is clean, bottom layer is very small. Worked fine on my PEI sheet.

Pobrania
142
Polubienia
27
Ocena
5
P
PrintablesStephen Massman

Delta 36-670 table saw miter slot slide

This fits my Delta 36-670 table saw and will work great for crosscut sleds or one off sleds. I printed it diagonally to fit on my large printer. I have included the gcode for the Elegoo Neptune 4 Plus.

Pobrania
142
Polubienia
16
Ocena
5
P
PrintablesÓscar

Featherboard for Scheppach HS100S table saw

What is a featherboard for a table saw? Essentially, it is a second pair of hands that provides better grip and accurate cuts . Fastened to the tabletop or fence a featherboard ensures that the wood is safely and effectively hold and fed…

Pobrania
139
Polubienia
17
Ocena
0
P
PrintablesNighthawk

Hobby Saw Miter guide

A simple miter / crosscut guide for a hobby saw that uses 2x 8mm x 2mm magnets to hold the sawblade in alignment. You need to print one guide and 2 fences to make the tool. The fences are held on with M3x12mm button head screws with hex…

Pobrania
138
Polubienia
50
Ocena
0
P
PrintablesDaniel Vitanza

Festool Vacuum Cleaner Adapter for Makita Mitre Saw

1. Introduction This simple adapter gives you the abbality to properly plug-in your Festool vacuum cleaner onto your Makita mitre saw. 2. Revision History Version Description Date A.1 Initial Release 15/01/2024 3. Printing Instructions…

Pobrania
136
Polubienia
10
Ocena
0
P
Printablesschneems

DustyBoi: Under Table Vacuum adapter for Delta 52-963 Bandsaw

Here's a video in action: https://www.reddit.com/r/functionalprint/comments/myy667/i_used_to_have_a_dusty_bandsaw_now_i_have_dustyboi/ This attachment removes the dust from the bandsaw blade. The vac attachment is sized for a Festool D36…

Pobrania
135
Polubienia
32
Ocena
0
P
Printablesgooglehupf

Bandsaw Jig for Measuring

With this bandsaw jig you can measure if the saw is parallel to the fence. You need a 10x2mm magnet (2mm thickness), which is glued into the hole with super glue. When mounted to the blade you can check whether the fence is parallel to…

Pobrania
119
Polubienia
33
Ocena
5
P
Printablesmaxmar

osVAC Adapter for Makita SP6000 plunge saw

Description osVAC Adapter for the Makita SP6000 plunge saw. However, it is rather a replacement for the original vacuum port of the saw to make the saw compatible with the osVAC standard. There are some adapters already available, but I…

Pobrania
118
Polubienia
5
Ocena
5
P
PrintablesTopher
Pobrania
105
Polubienia
10
Ocena
5
P
Printablessteffanders

Japanese Saw Storage System

Japanese hand saws are sometimes very expensive tools and require a certain amount of care when stored. The usual Japanese way of storing them in a fabric roll-up bag is very gentle and practical for travelling, but if like me, you only…

Pobrania
101
Polubienia
33
Ocena
0
P
PrintablesMattStultz

JET 14" Bandsaw Zero Clearance Plate

This is a quick print to give yourself a zero clearance plate for your JET 14" bandsaw. It's a tight fit and might need to be hit with a mallet into place but any looser was rattling and noisy. Print instructions Print as is and then…

Pobrania
98
Polubienia
7
Ocena
0
P
Printablesrazandersen

Dowel cutter for jigsaw blades

inset jigsaw blades in slots and use drill to move wood through the holes to create dowels

Pobrania
93
Polubienia
24
Ocena
5
P
PrintablesDude

Rikon 14" bandsaw rail caps

I made these end caps for the fence rail of a Rikon 14" bandsaw so it will hurt less when I keep bumping into the rail. For now it's made from PLA as it doesn't need the extra strength of PETG. After I bump into it a few times I may…

Pobrania
87
Polubienia
14
Ocena
0
P
Printablesbrio

Dust Port Adapter - Sawstop Table Saw to 50mm Festool Hose

Background I use an old Festool CT-22 vacuum + Oneida Dust Deputy cyclone separator with my Sawstop PCS and it works well ! This lets me avoid having to buy a bulky dust collector and route 4" duct work around my small workshop. I'm sure…

Pobrania
85
Polubienia
18
Ocena
5
P
Printablesstassek

Saw (58 mm) to Bosch Advanced Vac 20 adapter

Adapter for 58 mm dust extraction outlets (mitter saw, table saw, etc.) and Bosch Advance Vac 20 hose.

Pobrania
85
Polubienia
16
Ocena
5
P
Printablescookiecrook

DeWalt DWS779 Miter Saw to 1.625" (1⅝") threaded hose fitting

Will likely work with more DeWalt miter saws than the DWS779 I have, but YMMV. PETG or harder recommended. No supports needed if you print thread side up, but I used a brim for stability. This thread works with many (most?) household…

Pobrania
82
Polubienia
10
Ocena
4
P
PrintablesPEP3D

Bandsaw table insert with small slot

Bandsaw table insert, it fits to bandsaw model Holzkraft HBS351 and other brands like Elektra Beckum/Metabo insert diameter 70mm. diameter: 70mm slot: 2.1mm holes: 6mm height: 5mm / 4mm

Pobrania
79
Polubienia
5
Ocena
5
P
Printablesjcbreid

Zero Clearance for Jet Bandsaw

These inserts are very helpful when cutting small parts as it keeps these parts from falling into the saw. Since they tend to get widened out after use it is good to have a spare around to swap out when cutting small parts. I printed this…

Pobrania
74
Polubienia
4
Ocena
0
P
PrintablesRD

BOSCH GCM12SD 15 Amp 12 Inch Corded Dual-Bevel Sliding Glide Miter Saw

Bosch GCM12SD Shadow LED Light Upgrade – Custom 3D Printed Bracket + Full Install I designed and installed a custom shadow LED light system for the Bosch GCM12SD Glide Miter Saw, turning this already outstanding tool into a…

Pobrania
65
Polubienia
15
Ocena
0
P
Printablesgwendal

Shaper Workstation Inverted Jigsaw table

Inspired by the Festool CMS PS 300 module, parts to install the PS300 Jigsaw inverted and collect dust (barely) using a Festool Cleantec hose. The plate is a shaperhub project . In addition the model includes a connector to fix the plate…

Pobrania
64
Polubienia
26
Ocena
5
P
Printablesironsights

Pegboard SKILL Circular Saw Holder

I'd assume it works with most, if not all circular saws. I designed this to work with my SKIL 15 Amp 7-1/4 Inch Circular Saw, model 5280-01. You can see from the cad shots; I've reinforced the holder and pins for added strength. Saw…

Pobrania
62
Polubienia
10
Ocena
0
P
PrintablesLuke Notridge

Titan bandsaw zero clearance insert

A zero clearance insert for the Screwfix Titan bandsaw. Print instructions Print with 100% infill. Quality is up to you but I used 0.2mm layer heights. Print should take around 15 minutes.

Pobrania
60
Polubienia
5
Ocena
5
P
Printablesphotonours

SawStop Overarm Divided Wye

I recently had the need to add overarm dust collection to my sawstop CNS I decided to go this route : buy the blade guard with dust collection (TSG-DC) because it is a safety element and DIY the rest of the system (tubing, hose…

Pobrania
58
Polubienia
13
Ocena
0
P
PrintablesBM

Hole-saw centering guide

This centering guide will help you to create bigger hole in the place of an existing one. The model hub will be mounted on a diameter 10mm drill and is made for a pre-drilled diameter of 57mm. I used PLA as material for mine, but i…

Pobrania
57
Polubienia
26
Ocena
0
P
PrintablesChris B

Bandsaw guide 45°

A sawing guide for the bandsaw for sawing square sections into two triangles. Designed for pieces around 15mm in width. To be clamped to a straightedge. Suitable for small bandsaw with blades less than 25mm deep. I printed mine with 80%…

Pobrania
55
Polubienia
12
Ocena
0
P
Printablescrashkg

Replacement Bumpers for Ridgid Tablesaw Fence

The Original Ridgid TS3650 Tablesaw is great except for one issue. The fence. It never stays square to the blade. This is because the little bumpers under the fence have very little surface area to clamp to the rail. I increased the size…

Pobrania
53
Polubienia
12
Ocena
0
P
PrintablesP-196

Vorfilter für Sawyer Mini

Ein Vorfilter für den Sawyer Mini. Schützt vor mechanischer Verstopfung durch grobe Verunreinigungen des Wassers. Settings for Slicer: set bottom and Top Layer thickness to 0 and infill to Gyroid

Pobrania
49
Polubienia
7
Ocena
5
P
Printableshoco

Delta 14" Bandsaw 2" Dust Port

There are two different solutions in this set. An adapter that goes from the smaller sized port that is already on the bandsaw to a shop-vac. A drop-in replacement for the original dust port. Both of solutions accept two different sizes…

Pobrania
47
Polubienia
7
Ocena
0
P
PrintablesEl_Gato

Jigsaw blade handle

Ideal fürs Halloween Kürbisschnitzen mit den Kids.

Pobrania
43
Polubienia
3
Ocena
0
P
PrintablesSpockandlock

Jet Band Saw Throat Plate

This is used to replace the Jet throat plate for a band saw.

Pobrania
42
Polubienia
6
Ocena
0
P
PrintablesEnder3Knight4

Titan bandsaw to vacuum adapter (35-52.5mm)

Print in any filament, Does not need supports and does not matter what layer height you use. Happy printing!!

Pobrania
41
Polubienia
4
Ocena
0
P
PrintablesPaul C

Woodworking - Table Saw - Thin Rip Jig

Thin rip jig for use with table saws for making repeatable thin rips in material for facing plywood on cabinet and furniture or where ever thin material is needed. Allow for cuts up to 1 in, 25mm thick.

Pobrania
39
Polubienia
13
Ocena
0
P
PrintablesFred Bolger

Circular Saw Blade Storage case for 7 ¼” blades.

Store 7 ¼” circular saw blades with this storage case. Sharp carbide blades can be stored in your toolbox or tool bag without damage to the blades or bag. Case will hold several blades, cut foam or cardboard to put between blades for…

Pobrania
37
Polubienia
3
Ocena
0
P
Printablesbwmartens

Bandsaw Throat Plate

This fits a Grizzly G0555 bandsaw but can likely be adapted for others as well. The parameterized Fusion model is included.

Pobrania
37
Polubienia
2
Ocena
0
P
Printablessteffanders

Metal handsaw blade storage part 1

I used to have some spare blades for my metal handsaws in my workshop. The normal paper sales packaging dissolves quickly and the saw blades spread uncontrolled around the drawer. This simple box holds up to 60 blades sorted into 3…

Pobrania
35
Polubienia
19
Ocena
0
P
Printablesphotonours

P-clip for Overarm dust collection - SawStop

I made my own overarm dust collection for my sawstop CNS the stock part for the P-clip is not overly expensive but not cheap either (10.40 USD/pc) (https://www.sawstopstore.com/product/dust-tube-clamp/) But in my case, with using ABS…

Pobrania
32
Polubienia
3
Ocena
0
P
PrintablesBuildComics

Jigsaw Blade Holder

Uses neodymium magnets 5x12mm cylinder (optional) internally to mount it to any piece of steel (e.g. fridge?). It also inserts 6x12x3 mm bar neodymium magnets. There are pauses in the gcode for this. This allows you to keep your jigsaws…

Pobrania
31
Polubienia
5
Ocena
0
P
PrintablesJirkaDe

circural saw guide

A guide for cutting 80mm x 80mm wood beams with a circular saw with a cutting depth not big enough to cut the whole beam.

Pobrania
30
Polubienia
7
Ocena
0
P
PrintablesPkgrette

dewalt saw back cuting wear

printed in 100% infill i printed it in petg but i think you can use what fillament you want (needs to handel sun heat in the summer) l allsow made the cuting bord so it throw the woodust harder out in the back of the saw. works perfekt. i…

Pobrania
28
Polubienia
3
Ocena
0
P
Printablesemolkentin

HOLZHER 1205 Supercut Panel Saw Sacrificial "Nub"

I couldn't find these for sale online, and the existing nubs we had on our saw were all chewed up. Modeled after one of the pieces that came with the saw. 2 types of files available, one as a single piece and one with 9 on the printer bed…

Pobrania
25
Polubienia
1
Ocena
0

Coat of Arms of the city of Warsaw

This coat of arms of Warsaw (the capital city of Poland) was designed as a tactile graphics for blind people, but can obviously find far more applications. How to print No rafts or supports needed. Print in any scale. Printing vertically…

Pobrania
25
Polubienia
3
Ocena
5
P
Printablessteffanders

Metal handsaw blade storage part 2

I used to have some spare blades for my metal handsaws in my workshop. The normal paper sales packaging dissolves quickly and the saw blades spread uncontrolled around the drawer. This simple box holds up to 80 blades sorted into 2…

Pobrania
22
Polubienia
3
Ocena
0
P
Printablesr00nee

Downturn Skilsaw Jobsite Exhaust

On the job site I don't have a ducting system and needed to redirect sawdust down into some sort of container or trashbag. This quick little ring and redirection pipe fits snugly into the exhaust port of a Skillsaw Jobsite saw (if you use…

Pobrania
20
Polubienia
1
Ocena
5
P
PrintablesJer

Jet 14-DXPRO Bandsaw Belt Tension Reminder

The Jet 14-DXPRO bandsaw has a tensioner handle behind the top wheel and nearly out of sight. I'm not used to tensioning the blade before use and de-tensioning when done yet, so I made this cover for the power switch that should prompt…

Pobrania
20
Polubienia
1
Ocena
0
P
PrintablesJakub Hlavatý

Oil tank cap for Einhell KSE 1640 chainsaw

Prints without supports. I made mine out of PETG with 0.1 layer height so that the thread would print nicely. Tried to screw it on and it fits quite nicely. Add a piece of rubber or similar material for better sealing.

Pobrania
19
Polubienia
2
Ocena
0
P
PrintablesMarek Muláček

Segment for adjusting the saw angle Metabo KGS 305 M

Tiskl jsem v PLA výška vrstvy 0,13 segmenty 3 a hustota 18 bez podpěr..

Pobrania
18
Polubienia
2
Ocena
0
P
PrintablesczMaVi

Kid reciprocating saw spare blade

Extra blade for broken reciprocating saw toy. On the photo with the rest of the original piece

Pobrania
15
Polubienia
0
Ocena
0
P
PrintablesGGrapcio

Sawdust bag connector for the Bosh GFF 22 A milling machine

After the failure of the original connector, I designed a very similar one, but smooth inside, which prevents sawdust from getting stuck inside. Print as in stl. There is no need to use brims or supports.

Pobrania
13
Polubienia
1
Ocena
0
P
PrintablesGeert Bevin

Tactile Patch Sheet - MAVIS Buzz Saw

Printing instructions First layer: 0.2mm Other layers: 0.15mm Optional color change at: 0.8mm (layer 5) Detailed explanation of why and how this was designed: https://uwyn.com/tactile-patch-sheets

Pobrania
13
Polubienia
1
Ocena
0
P
PrintablesDan Rogers

Jigsaw Puzzle box lid - or - Getting poochie out of hot water

The jigsaw puzzle - A vintage puzzle from Cavallini & Co. - that I gave my wife for Christmas got some extra love from the dog, landing the dog in said doghouse. 3D printer to the rescue. Poochie is back on the good dog list.

Pobrania
12
Polubienia
1
Ocena
0
P
PrintablesViktória Pere

Stanley Junior Hacksaw Protector

I made this blade protector for my Stanley Junior Hacksaw because I kept carrying it to university and it was always awkward to store safely in a bag or toolbox. I was constantly improvising temporary covers for the blade, so I decided to…

Pobrania
11
Polubienia
1
Ocena
0
P
PrintablesF Engineering

ISO 7000-2416 protection against chain saw

EN: To indicate that the clothing or material provides protection against chain saws. DE: Hinweis darauf, dass die Kleidung oder das Material gegen Kettensägen schützt.

Pobrania
7
Polubienia
1
Ocena
0
P
PrintablesG4

Titan Bandsaw Warning Sign

A simple sign to hang on my bandsaw to remind me I have untensioned the blade when it is not in use (the handle is at the back so not visable) - I have upgraded the bandsaw using https://www.printables.com/model/490390-thumb-screw so I…

Pobrania
7
Polubienia
2
Ocena
0
P
Printablesh2odragon

Meat Saws sign

100x160mm sign, reading "Given the chance, all saws are Meat saws" with art of a carpenter's saw. Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames ,…

Pobrania
5
Polubienia
1
Ocena
0
P
Printablesjcjames_13009

Featherboard for table saw

Inspired by featherboards we can find on the market, I designed my own adapted to my need and the bed size of my MINI+ (180mmx180mm) I designed it using Fusion 360. Model includes T-nuts and knobs for M6 and M8 screws to fix it on the…

Pobrania
9845
Polubienia
2701
Ocena
4,91
P
PrintablesJopek Design

Articulated Sawfish (Carpenter shark)

Dimensions (LxWxH) 170 x 69 x 37mm (100% scale) Basic information Prints in place, no assembly is needed. The body is divided into 5 movable segments, which allow a wide range of motion, and grant the model with lifelike feel and…

Pobrania
7734
Polubienia
1389
Ocena
4,95
P
PrintablesPrintChallenge

Pochita (Chainsaw Man)

Have fun printing Pochita!

Pobrania
5822
Polubienia
1000
Ocena
4,9
P
PrintablesRCMakerLab

Powerful & Useful 3D Mini Saw

Many parts of the saw are designed for PLA filament. A few parts are designed for heat-resistant filaments (Petg, ABS, ASA). Assembly steps and details are shown in the video. Slicer settings are included in the track names. Any settings…

Pobrania
5462
Polubienia
1370
Ocena
4,67
P
PrintablesPrateek R

Tracksaw Square for Makita & Festool

A track saw square for the Festool Track. Installed with dovetail interface and no moving parts. The square has fairly tight tolerance and the dimensions are based on the three tracks I have access to. I do not know if this will be…

Pobrania
4493
Polubienia
690
Ocena
4,95
P
PrintablesJan Štech

Blade Scraper, Saw Handle, Wire Stripper

Blade Scraper Print the Blade Scraper without top and bottom infill for such a beautiful design (honeycomb infill). You need to print the white ring 2x and insert it from each side into the hole. Additionally, you will need a utility…

Pobrania
4039
Polubienia
1417
Ocena
4,95
P
PrintablesFearless

Table saw for Dremel

Support_dremel.STL for Dremmil 4000 Use the table extension for larger pieces for more stability and control, but also protects the sparks when cutting steel. INFO: To adapt other drills you can try with “All Motor Bracket.STL”…

Pobrania
3987
Polubienia
1744
Ocena
4,75