4123 modeli
Würth keychain screwdriver Introducing the Würth keychain screwdriver - Your Go-To Tool on the Go! Are you tired of fumbling around for a screwdriver when you need it most? Say goodbye to the hassle of searching for the right tool with…
Wydruk około 0,57 €–0,69 € nettoWstępna wycena jednego wariantu
Screw claw to hold screws in front of the screwdriver. Allows easy and one-handed screwing without the screw falling off the bit. You can support me with a coffee: https://www.buymeacoffee.com/maxwxyz Place the screw claw on the front of…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a holder for the extra bits that can be ordered for the LTT screwdriver. 12, 24, 36, 48 and 60 bit versions. The outer case is a single print with a print in place hinge. The inner bit holder part is meant to be print with…
Wydruk około 5,87 €–7,18 € nettoWstępna wycena jednego wariantu
Mit einer Kaffeespende könnt ihr meine Arbeit unterstützen: https://ko-fi.com/peopleware Danke :-) Für dieses Model existiert eine Version 2: PrecisionWinder NT: Gleiches Prinzip, aber einfacher - noch präziser und kompakter mit…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
3D printed palm ratchet knob (stubby screw driver handle) Print-in-place : Just print, and you are all set. Assembly work is not necessary. Durable ratchet mechanism : Tapered ratchet gear makes it not only easy to print but also sturdy…
Wydruk około 2,69 €–3,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This practical keychain is an essential accessory for those who love to be always prepared. It transforms into a screwdriver when needed. Inside, you can insert two interchangeable tips: one flat and one cross, each 25 mm long, perfect…
Wydruk około 1,21 €–1,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A very minor improvement to the screw mount remix of the honey comb screwdriver holder. This version Has fillets/chamfers around the outside edges to make it more pleasant to touch. The screw holes are slightly widened for M4 countersunk…
Wydruk około 2,58 €–3,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
🔵 Sonic Screwdriver of 9-10th Doctor 🔵 This screwdriver had the 9-10th Doctor and briefly in Season 5 the 11th Doctor. For a long time I wanted to create a sonic screwdriver of 9-10th doctor but I didn't have a time, today I finally had a…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
Simple plastic toy screwdriver for plastic screws with FreeCAD source file. With my print settings, the tip of the screwdriver is not very strong but as a toy for children it is quite OK and safer comparing to a metallic screwdriver.…
Wydruk około 1,70 €–2,07 € nettoWstępna wycena jednego wariantu
Gridfinity screwdriver holder for Craftsman screwdriver set.…
Wydruk około 8,89 €–10,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I designed a case to hold every (currently) available screwdriver bit from lttstore.com (with the exception of the bits you store in the regular-sized screwdriver). This case holds 60 20mm bits, AKA the five additional bit sets you can…
Wydruk około 6,83 €–8,35 € nettoWstępna wycena jednego wariantu
This is a remix of figterk 's model to be able to use any rigid filament for those who don't have any flexible ones. I used the Gridfinity compatible model from DSwanlund for the dimensions. The bit holder fits right into the case, but…
Wydruk około 3,34 €–4,09 € nettoWstępna wycena jednego wariantu
Updated the model to allow for easier removal of the screwdrivers. Organize your screwdrivers using the Ryobi Link storage system. Prints at 0.30mm layer height without any supports.
Wydruk około 2,47 €–3,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A stubby screwdriver which holds a coin. Perfect for all consumer electronics were a normal screwdriver isn't suitable. Print both parts, laying on the flat side with snug support only on buildplate. After removing the support insert the…
Wydruk około 1,10 €–1,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
BACKGROUND: The Elecraft KH1 blew up the portable HF radio operating scene when it was released. It covers 5 bands from 40 - 15 m and has an internal ATU and battery. It's actually designed for hand-held use. But with the standard whip…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix of johnzanussi's Williams Screwdriver Bit Holder. I liked the original bit holder a lot, but it didn't hold my bits tightly enough. So I made a couple improvements to hold the bits more securely. Compared to the original:…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
Remixed from Ricard2K's stand - the top part (screwdriverstand.stl) is unchanged, as it fits the screwdrivers perfectly. I have redesigned the base (Wera Stand 2.stl) as whilst the original is functional and clearly works, I kept having…
Wydruk około 5,14 €–6,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The mounts were printed with a layer height of 0.3. in PETG. No supports are required.
Wydruk około 0,70 €–0,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Inspired by https://www.printables.com/model/394330-hex-bit-holder-removable
Wydruk około 3,33 €–4,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
On reading the comments from the original it appeared the screw holes were being reported as to small. https://www.prusaprinters.org/prints/55082-universal-cordless-drill-hanger So before printing I added an extra screw hole and increased…
Wydruk około 2,53 €–3,09 € nettoWstępna wycena jednego wariantu
Adapted Eltord's LTT Screwdriver Hanger to work with Sy's Peglock. Requires "Board Attachment (Universal)" from “Sy's Peglock - Locking Pegboard System.”
Wydruk około 1,62 €–1,98 € nettoWstępna wycena jednego wariantu
Bit screw driver with print-in-place freewheel that uses a 3x3mm tubular neodymium magnet to hold the bit in place. There is an option for half length and normal length bits.
Wydruk około 0,97 €–1,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a bit holder for the Metabo BS18 cordless screwdriver series. I have the BS18 LT BL Q version, but it should fit for other versions too. It is attached with 2 short M5 screws, so it holds very well. Printable without supports. I…
Wydruk około 0,48 €–0,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Adding to the skadis-system by Petri Damstén - this is a hexbit holder for the Stanley STHT070885 Multibit Screwdriver and nut setter. The hooks were created by Petri - which are required to attach the Stanley hexbit set to the skadis…
Wydruk około 3,82 €–4,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Mini EDC screwdriver A simple and practical mini EDC screwdriver featuring a dual-position drive design for extra torque or standard screwing. It holds two standard hex bits and includes an integrated loop, making it easy to attach to a…
Wydruk około 0,52 €–0,63 € nettoWstępna wycena jednego wariantu
A very simple and convenient magnetizer (demagnetizer) for screwdrivers from magnets from 2.5 inch hard drives. All you need to do is print the two halves of the box, insert 2 hard drive magnets into them and close the box. The magnetizer…
Wydruk około 0,50 €–0,61 € nettoWstępna wycena jednego wariantu
Hello, Here's a remix from the Wiha small screwdriver holder from Colorfabb on Thingiverse (https://www.thingiverse.com/thing:1487220). The holder is made to hold 6 PicoFinish HEX screwdrivers from Wiha. The original design had two holes…
Wydruk około 1,86 €–2,28 € nettoWstępna wycena jednego wariantu
A quick remix a this amazing parametrix box, for screwdriver bits storage. You ca add a 10x5x2 magnet to lock the bit holder in place.
Wydruk około 3,08 €–3,77 € nettoWstępna wycena jednego wariantu
A simple yet functional bit storage solution for the Williams WRS-1 Ratcheting Screwdriver. It may also fit certain Snap-on ratcheting screwdrivers due to them being similar in design. Holds 6 standard 1/4 inch screwdriver bits and fits…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
My dad asked me to buy a small screwdriver that could take a standard 6.3mm hexagonal bit, so instead i made one with his request , large base but low height . I'm sharing it since a lot of people where he works wanted one too , hope you…
Wydruk około 0,82 €–1,00 € nettoWstępna wycena jednego wariantu
Want to get some stuff organized up onto my Ikea Skadis boards. Here's a video of the process https://www.tiktok.com/@buff3112/video/7129935849759755525
Wydruk około 1,00 €–1,23 € nettoWstępna wycena jednego wariantu
I need a desk organizer for my work table that could support a mix of everything, pens, small screwdrivers, measuring instruments, scissors, brushes you name it. I couldt find a good one so i made my own in a nice voronoi design as well.…
Wydruk około 1,18 €–1,44 € nettoWstępna wycena jednego wariantu
Created a storage box to protect and organize my ceramic screwdrivers Print instructions No special requirements for printing.
Wydruk około 3,19 €–3,90 € nettoWstępna wycena jednego wariantu
A simple tool for field assembly of all RC models that take nylon M6 screws to hold its parts together. Designed for my Multiplex Lentus for attaching horizontal stabilizer. Small size makes it ideal to leave in transmitter case to have…
Wydruk około 0,37 €–0,45 € nettoWstępna wycena jednego wariantu
Remixed models of Screwdriver Handle to fit my old set of small screwdrivers (good for small terminals etc.) with broken handles. I found original handle model as nice and remixable for my use case. Here are 2 new remixes containing holes…
Wydruk około 0,24 €–0,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Skadis Halter für Modelco.fr Schraubendreherset, anpassbar für andere Durchmesser. Als Haken wurden Standarthaken für das Skadispegboard verwendet. Skadis holder for Modelco.fr screwdriver set, adaptable for other diameters. Standard…
Wydruk około 2,47 €–3,02 € nettoWstępna wycena jednego wariantu
Overview: This is an addition to the Gridfinity storage system designed by Zach Freedman of Voidstar Labs who “stole” it from Alexandre Chappel. I made this storage box for a DeWalt Ratcheting Screwdriver Set. It uses a 4x2 area of the…
Wydruk około 9,01 €–11,01 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Octagon that holds up to seven bits that attaches to a keychain. The bits can be easily used from around the outside but can also be placed into the centre for a different grip. There's a tight fit so the bits don't fall out and get lost,…
Wydruk około 0,90 €–1,10 € nettoWstępna wycena jednego wariantu
To be used with Snap Tool Rack wallmount blocks (STR-001 and STR-001B). Step file also available for easier modification
Wydruk około 17,89 €–21,87 € nettoWstępna wycena jednego wariantu
This is a small, light, fast print, EDC bit driver. It is designed for .25" bits and has a magnet 3x6x12mm magnet to hold the bit (optional). Print time should about 1 hr. I used 5 or 6 walls.
Wydruk około 0,78 €–0,95 € nettoWstępna wycena jednego wariantu
Wall Holder for Cordless Screwdriver Set In 4 different Variants. With logo for WORX, KS-Tools and Kiprim as Well, without LOGO. Happy Printing… Set on Picture: KS-Tools 515.3699 Printed on: Original MK3S+ Filament: NOYES PLA Grey
Wydruk około 14,45 €–17,66 € nettoWstępna wycena jednego wariantu
EDC Screwdriver with Storage A compact, durable, and highly functional everyday carry screwdriver designed with an integrated bit storage compartment. It features a secure screw-cap with a built-in hole so you can easily attach it to your…
Wydruk około 1,62 €–1,98 € nettoWstępna wycena jednego wariantu
Bitsholder with a strong clamp that is designed to easily slide onto a belt or pocket edge. The bits holder has room for 10 bits and a slot in the end that can be used as a screw driver. The holder has 3 slots for 9.5x9.5x3 square magnets…
Wydruk około 1,74 €–2,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printed in Prusament PETG Prusa Orange 15% infill .15mm layer height and 6 perimeters with support turned on. Screwdriver bits fit snug, may want to scale up slightly for easier bit swapping. Included bgcode file for Prusa Mini+
Wydruk około 1,18 €–1,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I created this holder for the Wera 7400 torque wrench screwdriver. There are two separate models: Model 7440 with a torque range of 0.3-1.2 Nm Model 7441 with a torque range of 1.2-3.0 Nm You can find all the other holders and rails here .
Wydruk około 0,92 €–1,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Attachment for the PAX grid line
Wydruk około 0,63 €–0,78 € nettoWstępna wycena jednego wariantu
EN: The HAZET 810R bit or Inbus Flow 73424 bit ratched screwdrivers are some of the best screwdrivers with a silent and stepless ratchet. Nevertheless, I almost didn't buy the HAZET 810R because it doesn't have the very practical twirler…
Wydruk około 0,81 €–0,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Some of my planes have chipbreakers that are screwed to the blades. I really don't like working with a long screwdriver when handling sharp blades, so I made a small ‘grip’ for a impact-hex-bit.
Wydruk około 0,54 €–0,66 € nettoWstępna wycena jednego wariantu
This is a dr-55 Ratchet Screwdriver for the Ikea skadis pegboard.
Wydruk około 0,18 €–0,23 € nettoWstępna wycena jednego wariantu
Simple hexbit screwdriver with storage box for 4 hexbits. It is really small but still useful tool. There are 2 versions, normal and less tight. Thight version catch bits strong and no magnet is needed. Less thight version need magnet. I…
Wydruk około 0,21 €–0,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
simple screwdriver set for an altoids tin, i printed the box out of pla with 10% infill and the tip holder with the same material but 100% infill.
Wydruk około 4,34 €–5,30 € nettoWstępna wycena jednego wariantu
Remix of Wera Gridfinity Screwdriver Rack 1x2 that includes larger holes (14.55mm max diameter) for other screwdriver models (specifically, in my case, a set of Teckman T3 - T5 torx drivers).
Wydruk około 3,29 €–4,02 € nettoWstępna wycena jednego wariantu
Compact EDC Screwdriver with Storage A pocket-sized EDC bit driver built for daily convenience. It holds 2 extra bits internally, locks shut with a snappy friction fit, and includes a built-in lanyard hole to easily hook onto your keys,…
Wydruk około 0,42 €–0,51 € nettoWstępna wycena jednego wariantu
Note: Update available here: Pocket Screwdriver Kit v2 I picked up a pocket screwdriver kit similar to this at a tradeshow many years ago, and I wanted another one so here it is. The bits fit in snugly and the cover snaps closed. No…
I really like maxwxyz 's Screw Claw , but I'm not fond of printing the thin screw holder fingers in the vertical orientation. I also wanted to accommodate a larger variety of screwdriver sizes. This redesign has all the flexing elements…
Universal Ergonomic Screwdriver (Remix) This is an updated version of the popular universal screwdriver, focusing on improved ergonomics and an expanded set of collets. The main changes concern the shape of the handle — it now fits much…
I was told that it'd be impossible to fit a ratchet mechanism inside a tiny screwdriver, let alone hold more than a single bit. This is to prove that person wrong ;) also check out the Print-In-Place version A reversible ratchet mechanism…
Updated modified design - big “groove” added on top side, so scredrivers sit in it and cant fall off when accidentaly hit. Universal comb type holder for various tools. Comes in two sizes for bigger and smaller tools. Big - 5 cut outs for…
The Revolver Born from a particularly frustrating weekend of printer maintenance, tinkering and DIY I bring you “The Revolver”. A fully 3d printed screwdriver for ¼" Hex Bits What started out as a fun weekend, slowly spiralled into…
The PocketDriver is a sleek and practical EDC bit driver designed to hold up to 4 bits within its body. Help me create more FREE models! If you like the stuff I create, consider joining my printables club as a supporter. It makes a world…
New Version out now (metric and imperial) Keep your allen keys organized and turn them into a handy screwdriver! Head of screwdriver (black part) can rotate free for even more comfort. Note: You will need to warm up allen key with a…
The 5 holders "tight" version is the most space effective. If you want more space in between, then the other versions are c.t.c. 40 mm like the holes in the Skadis board.
Get the other engines here ! Get the screwdriver here ! Build Video/Instruction Print the weights at a higher infill percentage to actually give them weight (I used 70-80% infill on the weights). This entire print is around 180g of…
I wanted a gridfinity hex bit holder, there are a few available on Printables but none that quite had all of the features I wanted. I found the closest I could and remixed it to make it stackable. In gridfinty language this is 2x2 and 6…
I liked the idea of a honeycomb pattern to freely organize screwdrivers and other things from toya ( https://www.thingiverse.com/thing:3018389 ) But the solution had some flaws which forced me to redesign it. I do use Pegboards from…
Use your standard bits in this simple screwdriver. Update I added a folder with STLs that support different sizes of magnets. The original version is still without a magnet, which works well in my case as the tolerances are low enough to…
I'm building out my multiboard and I like the weight bearing snaps as they feel the most secure for my setup, so I put this one together and am pleased with how it turned out Details: Elegoo Neptune 4 Pro 0.6 mm nozzle 15% infill 1.2 mm…
I wanted to use the original model , by herbert , on my electronics bench, but it does not have a pegboard, so I remixed it to mount with screws or double-sided tape. This model matches the Pegboard Screwdriver Holder (7mm honeycomb and…
There are several different versions. 3 or 5 Pegs With or without front lip With or without print supports needed You can even install these upside down so the on the underside.
This is a Remix “Handle for Manual Rewind and Hexagonal Adapter for Electric Screwdriver” for an amazing project " Filament Spool Switcher & Winder " Design by @MiklosKiszely_486882 TO FULLY COMPLETE THE PROJECT, DOWNLOAD THE REMAINING…
Large screwdriver holder with honey comb pattern. The holder is very sturdy overall. Dimensions 220x114x45 mm. 9 mm hexagon (suitable for medium and larger screwdrivers). Wall mounting with two or four screws. Very easy to print in PETG,…
Multiboard screwdriver holder/shelf, robust design scaled for maximum volume of ender 3. Shelf is prepared for multiboar system: www.multiboard.io I also added support for more rigidity. V2: 7mm storter for better fit on Ender build…
Introducing the unofficial 3D-printed LTT screwdriver clone, equipped with a removable ratchet mechanism and storage for six bits. Assembly is simple, with potential for minor adjustments using glue if needed. Ongoing enhancements ensure…
Screwdriver organizers that are compatible with Gridfinity. You will probably want to print 2 ends, and then how ever many middle pieces to organize your screwdrivers. Inspired by…
You don't have a compressor but want to remove dust, wood shavings or other light dirt from your workplace? No problem! With this attachment for your cordless screwdriver, it's done in no time at all! Is it hot and you need to cool down?…
I wanted a holder where I could grab just the driver and bit set I wanted, so I came up with this! The main 1x6 driver holder can optionally hold two rows of bits around the shank of the driver, or you can use the 1x1 bit trays if that's…
Perfect gift packaging for your friend (56 screw). Screwdriver included. !!!!!!!!!!!!!! If there is any problem with screwing in the screw, first screw in the M8 metal screw which will correct all errors in our printers!!!!!!!!!!!!! I…
Update 3-Apr-24: Added files for different size magnets from various requests. Introducing v2 of the popular Pocket Screwdriver Kit ! Holds straight ¼" / 6mm bits, up to ~ 1" / 25mm in length. This version was re-built from scratch to…
Holder for screwdriver (set bought at Gamma)
Large semi-circular screwdriver holder, honeycomb pattern. Large, sturdy and universal holder for small and medium size screwdrivers. Relatively long but easy to print.
Modular stand V 2.0 The possibility of adding modules as desired. V 1.0 https://www.thingiverse.com/thing:2495885 Print instructions Category: Organization Print Settings Printer: Vertex K8400 Rafts: No Supports: No Resolution: 0,1…
This is my take on designing a perfect screwdriver holder ;). I went through a lot of designs already present on thingiverse and borrowed some ideas from a few, mainly 2918462 and 3671735 . They both are excellent designs however they…
FYI If printing for the Transparent or Nuclear Screwdriver print at 102% as they seem to be slightly larger. Always liked the remixes of this box for other tools so thought I would have a go at creating my own for the LTT Screwdriver.…
This is a Skadis Holder for the Wera Kraftform Micro Screwdriver with 6 Slots. It is mounted to the Skadis Board with the famous Universal Hook from CSD_Salzburg (you need to print 2 Hooks). As shown in the Pictures the Holders can be…
This is a Gridfinity -compatible screwdriver bit holder for the bit-sets sold by Linus Tech Tips. One of these (1x1x25) blocks will hold exactly one set of 12 bits. They are stackable when empty. LTT's bits are slightly shorter than…
So after I took on Martin Rigatoni's challenge with this screwdriver and LoboCNC promptly took me up on my unintended challenge with a much improved design and we saw many more _ designs by members of the screwdriver gang I wanted to…
This is an unofficial version of the Stubby LTT Screwdriver with 5 bit storage. During testing the screwdriver could not be broken no matter how hard I tried. The metal thing is called a bit extender and is usually used for drills, costs…
About A simple yet secure holder for the iFixit Mako Precision Bit Set for the Ikea Skadis pegboard using the Skadis Ultimount connector. The original design was based on the iFixit Wall Mount (Thingiverse) by TinkerLifeProjects . Neither…
This Screwdriver Holder is more space effective since you can just push or pull the screwdriver right in or out. Fits most screwdrivers and they sit tight and doesn't wiggle. To attach it to the HSW you need the empty inserts*. There are…
My first try at creating a model for sharing. Holder for 64 hex screwdriver bits and a magnetic extension bit. Inspired by LTT Screwdriver Bit Holder , but made “from scratch” in TinkerCAD using this template .
I needed a right angle screwdriver handle that could fit in a very tight place and none of the things shared online was small enough so I quickly created one using Blender. I shared the .blend file if you want to remix it so it better…
It's my turn again. I wanted to design a reversible ratchet that worked without moving an axle. I wanted it to be as small as possible and I wanted to keep the aesthetic of my first screwdriver keychain . This is what I've got. It's 50 mm…
The ultimate screwdriver holder for #Multiboard! Holds 12 screwdrivers in the main holders, plus has slotted holes for inserting extra smaller screwdrivers, and a front rail for tweezers, pliers etc. I don't have much horizontal space so…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Printing Parameters: Material: PLA or PETG Resolution: 0.2 mm Perimeters: 2 Infill: 15 % Supports: no One color or add color changes at 12.6 mm, 57.4 mm and 88.0 mm Tips and Tricks: Deburr the wheel Protect the wheel with some tape Use…
Hi Here you can find holders for a Bosch GSR 12V-15 and its charger for wall mounting. I've made a single bracket up to a triple bracket depending on how many you have. The chargers are simply inserted into the holder from the top, the…
Some holders for screwdriver
What it is A tiny screwdriver, storing seven 4mm Micro Bits (28mm in length) and attachable to a keyring or string on your gear. → Be prepared for that single or few screws that casually pop up, trying to ruin your day. The forces induced…
Made this remix for ¾" french cleat Added a single and a dual color version (MMU) Print upside down!
I love the Honeycomb Storage wall. I was transitioning from my peg board and I couldn't find a holder for my screwdrivers that worked like I wanted, so I made one. Nothing fancy but it works like I wanted it to.
