3kg Filament Spool Screwed Hanger
uses 14 screws
- Pobrania
- 155
- Polubienia
- 20
- Ocena
- 5
82 modeli
uses 14 screws
Handy handle made of PLA. Attached in two ways Stick it on the double-sided tape fasten with a 3mm screw Printing parameters: filament: PLA infill: 20% time: 12m Wider spacing will allow you to attach more cables. Dimensions: Width: 25mm…
This geodesic dome was designed to be assembled as a cat/pet house. The dome accommodates a pet bed up to 400 mm (~15.75 inches) in diameter. It was remixed to be assembled using M3 screws & nyloc nuts. While you don't have to print or…
Just a hook that uses the T-Nuts for Ikea Skadis Pegboards system from 6d6178 . Alternatively, you can also use the Skadis M3 threaded T-Nut system. For most items I use the IKEA Skadis simple key hook but for more heavy things I wanted a…
[DESCRIPTION] This model is a pipe holder that can be direct screwed in wall, wood, anklet…etc For pipes like PVC, PER, Multilayers...etc. It is fully parametric : you can change pipe diameter, height of holder and lockers sizes. See F3d…
Zweiteiliger Ständer für Barcode Scanner. Man benötigt noch einen M6 Gewindeeinsatz zum Einschmelzen und eine M6 x 20 Senkkopfschraube mit Inbus um das Oberteil zu montieren. Gedruckt mit PLA 15% Infill und 4 Perimeter. ……………………. Two-part…
Securely attached squash ball feet. Creality Ender 3 S1 Pro only. (Ignore my non-touchscreen, this is S1 Pro) These screw on to the printer base, using the existing holes, and grip onto the existing rubber blocks. The feet are then…
Hexagonal junction box with plain screwed lid - Cassetta di derivazione esagonale con coperchio basso a vite External dimensions - Dimensioni Esterne 112x100x50mm Surface-mounting enclosure Suitable for: Resize to adjust dimension All our…
Box with top, plain or with templar symbol. No supports. Print instructions Category: Containers Summary Box with top, plain or with templar symbol. No supports.
Just a little mount to hold the starlink ethernet adapter. It's a snug fit and the cable holds it too. Easily printed with the largest surface on the bed and I've mainly made them out of PLA on my Prusa mini in draft mode
I printed the wonderful RC boat provided by Mr. Chew that his friend had designed, but I was having an issue with the Cover for the main body flying off due to the speed, I decided it would be nice to have a lid that is a bit stronger,…
I made this little remake of the spool holder because i was afraid that the spool could potentialy fall off the holder
A Box to store your Stuff. It has a self-made thread on the Top.
There are already some plant supports like this, but I wasn't entirely satisfied with their durability. That's why I made one to screw together. It holds better and can also be extended in height. To make it even more durable, it is of…
This is a simple box with a screwed-on lid, with sturdy trapezoidal threads. It's more of an exercise in producing good, nicely printing threads completely in OpenSCAD, but since it's a box and the code is parametrized, it can still be a…
Just a simple plastic leg to attach to furniture. Use some glue and a nail to attach it Print instructions 1) Print it, I used 75% of filling, they are very strong. With 100% filling they are probably indestructible
Screwed Husqvarna / KTM Oil Funnel for Offroad Models with air release for better oilflow Should fit on all KTM / Husqvarna / GASGAS Offroad & Supermoto models. Feel free to remix to lighten it up or add some features.
Hi, Since I had a lot of play in my Toolheads after a few toolchanges, I was wondering why. After checking I saw that the glue of the pins was very flexible and I did not like the glued version at all. I was wondering why nobody had the…
More sturdy handle assembly for the Voron doors. Uses 4x M3 Bolts per door mount + 2020 mount. Printed with 0.2mm layer height. If you have questions feel free!
a simple container with a threaded lid. Einfacher Behälter mit Schraubdeckel. printed on Ender 3 v2 PLA 0.2 Layer Height
screwed endplate for item 20x20 additionally secured with m5 countersunk machine screw still allows access for standard connectors
For a M6x1 screw Lower Diameter: 21,00mm Upper Diameter: 16,70 mm Height: 36,00mm
Needed a headphone rack to attach to the sides of IKEA KALLAX shelves with self tapping woodscrews that screwed flush.
A stable screwed bag clip with a nut. Ultra secure and nice to slightly annoy your friends. Features Ultra stable bag clip Different lengths available (40/60/80/100/120mm) Perfect for slightly annoying friends Print in place Easy to print…
I used a 5x20mm pan head screw.
Small and easy print to display the Tonie figures of your kids. Just screw them invisible to the wall with 2 screws 3x40 or 3x50 mm. Be creative with colors and pattern! The podest ist magnetic, so that the Tonie figures will hold on it.…
Get the top from https://www.printables.com/model/74159-nintendo-switch-game-storage ! Be sure to leave a like there! This is a remixed bottom where the middle is sunk in to make the games visible. The games have enough tolerance to…
Ready for the coming planting season? This time I made a larger plant support. The parts are screwed together so that they can't slide apart. I used PETG for better durability. Please remove the support carefully before screwing together,…
For keeping jigs in place on your workbench. I use it for a shooting board and a planing stop.
screw driver holder
A simple wardrobe shelf support that can be screwed in. The pin is 5 mm in diameter. Printed with PETG 100% infill 0.2 layer no supports
I used PETG for better durability. Please remove the supports thoroughly before screwing the parts together, otherwise the walls could break. The screwing is done in the order of the pressure plates.
Picture mount to be screwed to picture (i.e. wooden frame) To screw the mount to the frame I've used 3 x 2.5mm screws. You could use slightly larger or smaller once as well. No support required. I printed with 4mm nozzle and 20% infill.
Muschelgriff runde Form für Schubladen oder Laden oder was auch immer. Griffbreite 50, 60, 70, 80 und 90 mm. Die Breiten 50mm und 60mm haben Löcher für 3mm Schrauben, die Breiten 70, 80 und 90 mm haben Löcher für 4mm Schrauben. Für…
This 2.5in to 3.5in drive tray adapter uses screws to secure the tray to the computer chassis, because screws are great, cables can be stiff, and your drive coming loose inside the case is bad. Notes The 3mm holes on the side of the drive…
print with hook upwords .4 nozzle and normal mode
I have used the simple screwed T-Nuts Hook for Ikea Skadis by Clemi for several use cases on my Skådis board. Unfortunately they were to short for a box of drills, I wanted to hang onto my Skådis board. So I designed two longer versions.
Screwed Yamaha Oil Funnel for Offroad Models with air release for better oilflow Should fit on all Yamaha Offroad models. The picture is the Husqvarna version but the Yamaha one is exactly the same but with other thread size and the…
Replacement for original fan holder. the original 40x40mm fan air guides are still used Print Settings Printer Brand: RepRap Printer: I3 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Notes: print on the flat side! Category: 3D…
Muschelgriff ovale Form für Schubladen oder Laden oder was auch immer. Griffbreite 50, 60, 70, 80 und 90 mm. Die Breiten 50mm und 60mm haben Löcher für 3mm Schrauben, die Breiten 70, 80 und 90 mm haben Löcher für 4mm Schrauben. Für…
I liked a lot the sewing box but i don't trust glue, so i tought ‘screw it!’ The modified model gives up the full 3d printability and needs to be kept together through a number of M3 countersunk screws, precisely: 32 M3x12 2 M3x25 5 M3x8…
A simple, but really functional, under the desk headphone mount/stand using screws. It can accommodate a large selection of headphones. Really simple print. Can be mounted using 2 wood screws under the desk. Holes for easy screwdriver…
Drawn up and 3D printed in ABS as a Lid/Panel support. My WED-15-77 droid's main body is wood construction, I needed a support for it's panels. Does what it says on the tin lol.
Maturity: Very good 6 prototypes. In use since 2022/01. If you loose the cap of an oil bottle, you can replace it with this screwed cap. The dispenser material is most of the time made of low surface tension material. Then it is hard to…
Needed a Ziptieholder for my lack, designed one that is screwed in with countersunk screws. i wanted one wich does not use much material but still works as intended screws i used have a 5,5mm head and a 3mm diameter. the Zipties i used…
A filament spool holder. You dont need supports to print it. The only thing you will need are two 608 bearings like this one: https://www.amazon.de/St%C3%BCck-Kugellager-608-2RS-Rillenkugellager/dp/B07XHTFJ3V/
My new TL-SG105 doesn't fit the original mount downloaded here. Vendor design changes perhaps? The original mount peg positions are 14.33mm too far from the tab border and are also too big to get through the “+” holes on the switch. What…
I needed to be able to screw coach screws into the ground to act as pegs to hold guy ropes to hold up a 5m telescopic pole for a windsock and decorative items when flying my kites. This handle does the trick, and saves me carrying around…
A clothes hook that can be mounted anywhere. The screwed version has a 4mm diameter hole and a ~4.5-8.2mm compatible diameter screw head. It is recommended to print this with 6+ walls to make the hook stronger.
A box for the SwiCC ( https://knflrpn.com/SwiCC/ ) that uses M2 heat-set inserts and screws.
This is a Wallhook which is screwd too the wall. For example, you can hang a backpack on it. Print Option: Bambu Lab PAHT-CF 50% Infill If you have any questions, feel free to ask.
This is pretty simple, you just print it out then screw up your elbow. Fun for the whole family. This is not a practical print, but if you find a real world use for it, I'd be very interested to see what you come up with. Printing Print…
I used a WLED controler from GLEDOPTO to control a larger assembly of WS2812. Therefor it is mounted in a control cabinet. For easy access I wanted to have a snap in carrier. Easy to print. Base assembly with 2.5 or 3mm screws Printed in…
Same as the original vertical nutcase, but with holes/inlets for m3 nuts/bolts in the front/side panels.
Muschelgriff halbkreis Form für Schubladen oder Laden oder was auch immer. Griffbreite 20, 30, 40, 50, 60 und 70 mm. Für 3 bzw 4mm Schrauben. Für Linsenkopfschrauben, Zylinderkopfschrauben oder Sechskantschrauben. Nicht für…
Made a simple version of the original product. Works good. STEP included for other remixes Category: Computer
A sign I designed in Tinkercad.
A small and simple screwed hold-down for basic lamp cord. Doesn't put much tension on the cable as is so you can have the screw not super tight and adjust tension as needed.
This bucket must be printed in vase mode . The outer profile is built of one quite simple profile which is screwed twice, each time in the opposite direction. Based on the steep walls no open layers are to be expected. Since the wall…
screwed 1 mm filament holder You need 4x M3x8 1x M3x20 1x M3VK
133mm-120,5mm connector 148mm-120,5mm connector counterhold designed with M4 inserts inmind I designt these to connect air hoses with a flage.
The @rpr_designs_3558885's model was a little bit too fragile and wouldn't fit my Spectrum Filament spools. I include the original description: Tired of having a drawer full of filament clips that only fit some of your spools? I designed…
This is a drawer I designed for my desk ( https://s.click.aliexpress.com/e/_c3eibuQ3 or https://amzn.to/4uA1DWS ). It features a spring-loaded stopper that prevents the drawer from falling out when fully opened, while still allowing you…
Designed for the E3D V6 Carriage. I dont like the flatty fan bracket they shipped with the e3d v6 Hotend. ATTENTION: the 40mm version is not testet yet... feel free to print it. And i would like to hear Printing: Printposition is…
These are two simple brackets designed to mount the Fiio K3 DAC under a desk with a single M3 screw on each side. The print is quick with no excess material, providing a stable hold. The DAC is inserted by flexing the brackets slightly.
This is a simple headphone hanger, that could be printed with no supports. This can also be used to hang clothes on it (no more the 1 kg)
The clips can be clicked on the Thule Side Frame and retaining straps can be pulled through. There is also a version with screws, where pockets can be screwed on with M4 screws…
If your beloved badge zipper needs a repair or your gifted one is just awkward ugly you can use this model to print a custom designed cover. You have to reuse parts of an existing badge zipper … so it's not a full functional model on it's…
I USED CREALITY K1C w/ 0.4mm nozzle Designed for the M6 self-tapping screw I used PLA, but ABS, PETG, ASA, etc. can also be used. Stronger and better than the original! Dimensions: Height: 36 mm Lower Diameter: 22 mm Upper Diameter: 17 mm…
I bought this fanxy mirror package at the local ikea store. While unboxing i didn't trust the stickers to stick them to the wall, so i quickly build this SCREWED UP LOTS hanger. 2 screws per hanger do perfectly fit, also they won't be…
I used... 3 x round magnets (10mm x 5mm) but you can also use rectangular magnets (6mm x 20mm) or smaller If you have a non-magnetic trash can take 2x screw M3 You can print without any support Optional print 3x of the covers if you want…
For maximum resistance has to be printed on horizontal, if printed on vertical it can snap from any of the layers( most probably from the base) obviously change dimensions as needed.
As my previous model was too attractive it has been stolen after only one night outside. So I designed one with screws. Two version in the tree: 22.2mm and 28.6mm Free to you to copy a body and then modify to your need. I used TPU and M3…
Because I wanted to mount the side and back panels with screws, I modified the panel holder part to be a 6mm thick backing piece to incorporate a m4 metal insert. Atm I can't try it out. so I have no Idea if the parts will fit. I don't…
This BCAR cover remix is for those who either require a brighter color cover to meet their community local rules, want different color shrouds that are easily swapped around for cosmetic purposes without needing to source another BCAR,…
I created this to have an easy way for a 'second line of defense' to secure the phone while paragliding.
**Version 2 - please use the riser-v2-* files. The earlier files are left attached only so nobody loses a part mid-print; they are superseded.** Four printed legs screwed to a plank. A monitor riser sized for a printer that cannot print a…
My new TL-SG105 doesn't fit the original mount downloaded here. Vendor design changes perhaps? The original mount peg positions are 14.33mm too far from the tab border and are also too big to get through the “+” holes on the switch. What…
The @rpr_designs_3558885's model was a little bit too fragile and wouldn't fit my Spectrum Filament spools. I include the original description: Tired of having a drawer full of filament clips that only fit some of your spools? I designed…
For maximum resistance has to be printed on horizontal, if printed on vertical it can snap from any of the layers( most probably from the base) obviously change dimensions as needed.
a simple container with a threaded lid. Einfacher Behälter mit Schraubdeckel. printed on Ender 3 v2 PLA 0.2 Layer Height