Wyniki wyszukiwania: self

Self-watering rectangular planter (with optional labels)

The siphons are printed separately and then simply pushed into place. I did it this way to avoid using supports. Water level indicator The floating water level indicator is a bit tricky. Print the indicator (1 perimeter, no infill),…

Helical Self Watering Planters

If you like this design, check out some of my other designs like this one. What Files to Download Chose a model based on the pictures below Single Swipe: Double Swipe: Double Swipe Curved: Also available is the Self Watering Insert: Print…

Self releasing geared clamp hook for towels

Use-case This geared self-clamping and self-releasing hook is ideal to hold towels that have no hanger (or have an owner that is too lazy to use hangers). To hang up the towel, simply touch the lower lever slightly from the bottom and it…

~*THE ULTIMATE*~ Tanto Blade Styled Combat Knife/Short Sword *Self Defense Model* - Fully Printable*

Self Watering Plant Bulb (several sizes)

Self watering bulb for planters. Just fill it with water and stick in soil. Comes in 100ml, 200ml and 300 ml versions If the bulb is getting empty too soon for your liking, try covering the opening with a bit of soil and then sticking it…

Night Raids Ultimate Karambit Knuckle Duster *Fully Printable* ~Multi-Color Night Raid Logo Imprinted~ | THE FIRST AND LAST Self Defense Model You Will Need |

PET Bottle Self-Watering Attachment - PET Bottle Upcycling

— Updates — 27/08/2023 - Okay, I've had quite the busy year 😅 So I'm finally getting around to creating lower flow versions as well as looking at different threads and integrating washers for a tighter sealed fit. Should be around a month…

Modular Self Watering Planter - Endless Expandability !

Back Story Of This Design: I wanted to push my skills with 3D modelling and put my green thumb to use so I decided this would be a great place to start on expanding my skills at making nicer looking models in CAD. This planter is designed…

Self Watering Plant Pot

Simple self watering plat pot with floating water level indicator. Inner pot diameter: 8 cm. The reservoir is designed to hold approximately 100ml of water. It is possible, though not recommended, to fill a bit more. When using an…

Self-Defense Cat

A self-defense keychain inspired in the cats of sailor moon. Easy, fast and useful print (tbh you never want to use it, but it's good to have the power of the moon at your side) Also, you can change color at the moon layer to make it look…

🚗🥤 Self-Levelling Cup Holder for car mount.

Info: inspired by great gyroscopic model from @phi.gl for stroller, I wanted to have it in the car :) Thanks for originil print! I used this ventilation connector shape from print by @icepick Designs (thank you too) I designed car vent…

Cat Wall Corner Self Groomer

SINGLE PRINT! NO SUPPORTS! My prints were done with no supports. In order to achieve this, the spikes are a little more blunt/less sharp/less acute than some other versions you may find. But these spikes are still plenty long and sharp.…

Customizable Self-Watering Planter Insert for round pots - Source included

I wanted a self-watering planter that I could insert in my various ceramic/plastic pots and would be fast, easy and economical to print. You can use this insert in pots you already have. Using the attached Fusion 360 file, change the…

Self Driving Tractor Sprinkler

Fully 3D printable lawn sprinkler that propels itself with water pressure and follows a path set by the garden hose. BOM: 3D Printed parts 1.5mm wire or paper clip ¾" BSP Standard Garden Hose Adapter Print Instructions: PLA (suggest…

A Self Watering Planter (One Print in Spiral Vase)

These parts are designed to use a few solid layers on the bottom and then a continuous and unbroken profile all the way up the part. Prusa and Slic3r call this vase mode, while Cura calls it spiralize. A single piece/print design of the…

Whitewater Raft, Self-bailing

Designed using parametric equations and Calculus ! (And kids still say, “ when am I ever gonna use this? ” … for shame!) Three polynomials (one for each axis) describe a beautiful curve in 3-space for half of one side tube. Then cap it…

Planetary gear clock - Self adjusting

This is my version of a 3D printed clock. I designed it entirely in Fusion 360 and it has now been running for a couple of months. Time keeping is very accurate. It uses a Nema14 stepper motor, a TMC2208 driver as well as a Wemos D1 mini…

Self-watering square planter (fix)

Introducing the upgraded version of the self-watering planter design! This remix takes the original square design from Mikolas Zuza and improves upon it with fixes to the problematic outer and inner parts. With its self-watering feature,…

Selfholding drilling dust vaccum attatchment for Kärcher and Bosch Professional C35 System

German: Dies ist die neue Version des bei mir seit einem Jahr sehr bewehrten selbstansaugenden Absaugaufsatz für das Bohren in Beton- oder Ziegelwänden im Wohnbereich für das Bosch-Professional click and clean System oder das Kärcher C35…

Scalable Self-watering Planter Insert with Optional Funnel

Scalable Design I designed this 5" self-watering planter insert to easily be scaled up and down for different pot types. Simply measure your pot diameter and set the dimensions in your slicer. The design is 5"x5"x5" which makes it easy to…

Vase mode self watering pot

There are many self-watering planters but I wanted one you can print in Vase Mode. It should be faster, use less material and still be water-tight. Use Spiral Vase or whatever it's called in your Slic3r. Extrusion width should be 0.7mm+…

Self-watering indicator pot

Jan24. Minor updates to some angles and tolerances following Xmas 23 present builds. Modified indicator which now holds a more central position when in the extreme ‘up’ (out of water) position. Code for Mk4 added alongside updated Mk3…

Self-Draining Geometric Soap Holder

Introducing the Geometric Soap Holder! This model doubles as two soap holders in one! Otherwise, they can be used together for a more pleasing experience. Print Settings Keep layer height relatively low to achieve proper curves/slopes for…

Boobs Out Selfie: This Is Me.

Self-Defense Red Panda

Because the first one was relatively succesfull, i think I'll post the other models that I have created Another self-defense keychain inspired this time in a cute Red Panda. Again, you never want to use it, but it's good to have it. With…

Automatic Smart Plant Pot - Arduino, Self Watering, Project

Print, assemble and program your own intelligent Smart Plant Pot. With a hidden water reservoir, pump and sensors why not make your plant care easy. With an Arduino Nano at its core this project uses a water level sensor to let you know…

Planter - Self Watering - Utilitarian

These were designed to keep my pepper plants in between seed starting and planting in the ground after the last frost. I also have some tomatoes in them. The wicks, connectors, and funnel are optional. I find that I don't connect them…

Selfie Statue (Orsay Museum, Paris.) remix.

Albert-Ernest Carrier-Belleuse was a prominent French sculptor and ceramicist of the 19th century, renowned for his eclectic style blending realism, naturalism, and decorative elements. His works often incorporated mythological and…

Heltec Esp32+LoRa+OLED self closing case

I took the great design of Ornoterms and replaced the holes with easy snap fits.

Self-watering plant container spike for PET bottles

This print helps you feed water to your plants even when you away from home. By keeping some water in the tray, the soil will suck up water to the plant when needed. The PET bottle will then refill the tray when the water gets low enough…

Self-assembling virus (dodecahedron)

Self-assembling "virus" (dodecahedron). Demonstrates how viruses self-assemble via symmetric interactions of subunits that have favourable interactions with each other. Original model (self_assembling_virus) is adapted from…

Würth Akku Wandhalterung/ Self-Locking Wall Mount for Drilling battery

This Model is designed to be mounted on different surfaces with M4-screws. It also has a self-locking-mechanism.

Self resetting target for nerf target practice

I have only printed in PLA so far, but will try PETG. Print settings (CURA) 5 walls Slicing tolerance exclusive 20% infill Assembly is fairly straightforward, the spinner body can hold 2 AA batteries for a counterweight but other heavy…

Yin Yang Planter (self-watering)

This yinyang inspired planter comes with water-level indicators and enough space for one or two plants. If your water level is out of balance, simply refill through the water-level indicators and watch them rise. Water-Level indicators…

Cable Wall Clip self-adhesive

Self-Adhesive Cable Wall Clip Hey maker! 👋 Keep your cables tidy without buying huge packs from the DIY store. Features: Simple, fast-to-print design using minimal material. Easy to remove cables when needed. Can be scaled for different…

Samozavlažovací truhlík - 5h Vase Mode - Self-Watering Planter

Model se skládá ze dvou velkých částí vytištěných přes PrusaSlicer ve vasemode, které jsem tiskl s výškou vrstvy 0,3mm a 3 spodní vrstvy, za cca 2x 2,5hod a pak dvou sifonů, o výšce vrstvy 0,3mm, dohromady vytištěných za 0,5hod. Použil…

Self-Watering Pot

Experience the future of hassle-free gardening with the revolutionary self-watering pots. No more worrying about over or under watering your plants - this innovative design takes care of it for you. Choose between the tall pot for…

Self-draining sponge holder

This is a simple sponge holder that drains the water from a wet sponge back into the sink. It can also be used for a soap bar. This model is designed so that you are able to print it without supports. Just make sure the model is standing…

Self-Draining Sponge Holder - Raised 6mm

Self-Draining Sponge Holder | Wave Drip Tray - Remix raised by 6mm - Size: Large (115x85mm)

Self -locking yogurt cap (editable)

CZ: Samosvorné víčko pro jogurt (Lidl Pilos). I když z mé strany byla snaha vytvořit co nejvíce univerzální model, nesedí na úplně každý kelímek (stejný výrobek, stejná značka). Doporučuji proto model vytisknout ve více velikostech…

Self-Kingable Checkers Piece [print-in-place]

Why use two when one will do? King your Checkers pieces on your own. A print-in-place design, no supports required. 32mm diameter x 8 mm height (1-¼" x ⅓"). Uses approximately 5g of filament per piece. I printed with a brim, because the…

Self-draining Succulent Planter

No supports required! Designed to minimize filament use, while maintaining strength! Entire print fits inside a single Prusa MK3 bed! All perimeters are sized to perfectly print with two perimeters with zero infill! (except the base…

Self-Draining Sponge Holder v2 | FlowSlope Air-Lift Tray

Say goodbye (for good) to soggy, slow-drying sponges. This upgraded drip tray builds on the original wave design by combining a sloped drainage plane with raised airflow studs , maximizing both water runoff and air circulation. What’s New…

Gimbal for selfie stick (two degrees of freedom)

These parts upgrades your simple selfie stick to a two-dimensional gimbal, without adding significant weight to your travel language. I have made it to use my GoPro Hero8 for recording running videos of scenic routes when I am out on…

Self-watering Juice Bottle Planter

When looking for a self-watering planter to move my basil into, I realized I could just cut an empty bottle of juice in half, flip the top upside down, and print a few parts to make the whole thing viable while saving some plastic and…

Door Hinge Stop - Prevent door from closing by itself

I have a door that I want to stay open but it closes by itself so I made this to fit onto the hinge and hold it open. Fusion 360 f3d file included for you to change dimensions to fit your needs.

Selfie stick upgrade for Radiacode 102/101 "joint"

Upgrade selfie stick v2 for Radiacode102/101. This spacer-joint allows a smooth change of the RC102 mount. https://www.printables.com/cs/model/552255-radiacode-102101-selfie-stick-v2 Installation: if I already have version 2 printed and…

Self inflating matress valve seat

The receptacle part of a self inflating mattress where the valve plugs into the mattress. Printed with garbage creality green pla.. rubber cemented in place.. holding up sofar.

HexaDry – Honeycomb Makeup Organizer | Self-Draining 5-Compartment Holder

Honeycomb Makeup Organizer | Self-Draining 5-Compartment Holder A simple, functional organizer designed to keep your everyday beauty and bathroom essentials neat, accessible and dry. The five compartments feature different heights, making…

OpenPrintTag Clip-On Holder – Glue-Free, Self-Centering, Fits 1 kg Spools

————————————————Deutsch———————————————–– Universeller OpenPrintTag Halter mit selbstzentrierender Dreibacken-Mechanik (OpenPrintTag Remix) Dieses Modell ist ein Remix "Reusable OpenPrintTag Holder" und erweitert diesen um eine…

Pipe end cap (self-titening)

With this tube end cap diameter 19mm you can customize all your project made with tubes or holes. insert the assembly in the tube and turn until the collet expands and hold it in place. If you scale the model up, pay attention that the…

Metric self tapping thread test jig (F3D parametric model)

This is a parametric Fusion 360 model to quickly generate a test object with specified hole diameter that decreases in steps of 0.1mm. Easy to find the right hole diameter for self tapping screws, bolts, inserts and/or press fit axles,…

Fishy Soap Dish - self draining

A simple self-draining soap dish, meant for use in the shower or on the edge of the bath. The liquid drains out the slot in the bottom and is channeled to the side - orient the drain side towards the down slope in your shower/bath. The…

125mm - inside x160mm - outside. Dampkap verloop paste niet, dus zelf 1tje geprint. Hood gradient did not fit, so printed 1 myself.

In de winkel was niet het juiste formaat te vinden, maar de printer wist er wel raad mee. The right size could not be fo.

Self Watering Flower Pot Filer

This was made as a way to supply water to self watering flower pots. The idea was to remove the need to take the flower pot out of the self watering holder.

DriftJug Mini – The Rigid, Reusable Bottle for Self-Watering Pet Bowls & More

Overview: Tired of 2L soda bottles collapsing and crinkling in your self-watering pet bowl? DriftJug mini is the sturdy, reusable solution that won’t deform, leak, or look terrible over time. Designed to keep water flowing smoothly for…

Print-In-Place Storage Pod Ball with self-locking action.

A Print-In-Place Storage Pod Ball with self-locking action. The perfect size for storing the DUMMY 13 models. Setting the INFILL Top and Bottom Fill Pattern to Octogram Spiral will give your pod a unique design!!

Gameboy Camera Selfie Stick Adapter for GBA SP

Introducing the (Unofficial) Gameboy Camera Selfie Stick Adapter! Take hilariously poor photos, now farther away! Can't quite get everyone in the photo? With a little ingenuity you now can! This original selfie stick adapter cradles your…

[OEDG] Selfcentering drillguide

Selfcentering drillguide for different bores 3-8mm. Can be centered on edges by aligning the middle pole and the pole on the corresponding bore on opposite sides of the plate. Can also be used for perpendicular holes on any surface and in…

Expose Yourself to Art sign

100x160mm sign, with text reading “Expose Yourself to Art” and image of a person opening their trench coat to a framed painting on a wall. Best with color switch above 1mm, as with included gcode file. Also see the Shadowbox Frames , into…

Rusta self-adhesive hook magnet mount

A simple mount to be able to magnet mount the self-adhesive hooks from Rusta. You pick howmany magnets you use, up to 9! I used 5 and stuck the hook on it. works like a charm. magnet diameter is 10,1mm and 2,1mm deep.

BirdWatchAI Outdoor bird feeder with camera and AI Species detection with community feed (No subscriptions) print and build it all yourself (or buy it) includes software. NO SUBSCRIPTIONS! Your data stored locally, not in cloud (unless you want it there).

See www.BirdWatchAI.com for all of the details on how to setup the software. Free download. You can print/build it all yourself, or purchase a setup kit. See the live community feed of feeders currently running the BirdwatchAI software at…

Pastamatic - Filament Spool Winder for Bambu Lab X1C/P1P AMS (level winder with self reversing leadscrew)

I tried another spool winder but found it finicky and delicate. I designed this winder from scratch to be simple and robust, using the same self reversing leadscrew mechanism found on industrial cable winders Why pick this model: Prints…

Small Self-Watering Seed Starter

Updates 01-03-2023: Uploaded a new redesign. 06-12-2021: Fixed mesh issue with Basin_3x1, updated Basin_3x1.stl. 20-07-2021: Fixed the sizes of BasinCover_3x3, 3x1 and 1x3, small fix parametric parameter. 06-07-2021: Added extra drainage…

Hydroponic, Self-Watering, Seeds starter, Robert Planters

Would you like to make extra income selling these planters (and future new models)? Please feel free to check the models with the included commercial license here:…

Self Centering Gauge

Thanks for checking out my model! You'll find all the details, instructions, and recommended print settings below. If you enjoy my designs and would like to support my work, feel free to buy me a coffee . I'd really appreciate it! Happy…

STYR-01: The Self-Stabilizing Rolling Robot

STYR-01 is a compact and charming rolling robot that fits in the palm of your hand. It features a passive stabilization system using an internal counterweight. Thanks to this mechanism, its head always remains upright while rolling,…

Self-Draining Sponge Holder | Wave Drip Tray

🚨 UPDATE: Check out the improved V2 here: BOM: Printed with ROSA3D High Speed PLA Gray Say goodbye to soggy, smelly sponges. This drip tray features a functional wave pattern on the bottom that lifts your sponge (or soap bar) slightly up,…

Standard, XL, and XXL Self-Centering Filament Spool Holder (Compatible with All Spool Sizes)

9/22 update - added the XL & XXL Sizes Watch out YouTube video on how we made this! CLICK HERE FOR ASSEMBLY INSTRUCTIONS AND MORE DETAILS

Self Defense Knuckle Spike

The Self Defense Knuckle Spike is an ergonomic self-defense tool designed for both striking and stabbing. Crafted to provide versatile protection in perilous situations, this tool enables effective defense against assailants. With its…

Rose – Paint-It-Yourself

Rose – Paint-It-Yourself Figurine A blank, matte-white model of a classic rose, designed for personal painting and decoration. This DIY collectible blends timeless elegance with a minimal, smooth form—perfect for creative projects, gifts,…

Self Draining Bar Soap Holder

Soap bar holder that drains on its own

Self-Draining Kitchen Sponge & Washcloth Stand

This 3D-printable stand is designed to hold sponges, washcloths, and soap, ensuring that excess water drains directly into the sink instead of pooling on your countertop. Say goodbye to soggy sponges and messy countertops with this…

Self Watering Pot/Planter (Parametric)

Introduction The design was inspired by all kind of different self watering pots I found, trying to combine them into the best solution possible. A special mention goes to Prusament for their “ PLA Recycled Self-watering Pot ” design.…

Self Watering Designed Succulent Planter

Modern designed self watering succulent planter with water chamber. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+ premium 3D models – with new designs every week ! 🔧 Includes STL + Fusion…

Moos Stab | Moss Pole - self watering

Verleihen Sie Ihrem Indoor-Garten mit dem Moosstab-Set eine elegante und präzise Lösung zur Verbesserung des Wachstums und der Präsentation von Kletterpflanzen. Das umfassende Set enthält einen sorgfältig gestalteten Moosstab – Dieses…

Adjustable Self Watering Spike

*UPDATED the screw thread Adjustable self-watering spike for indoor and outdoor use. By using a plastic bottle you can provide the garden plants with an adjustable drip irrigation system. By turning the valve you can adjust and control…

Weihnachtself Türrahmen

Stärke: 6mm Gedruckt auf Prusa MK4 Print: 0.2mm Nozzle: 0.4mm Support: Not needed Brim: Not needed Infill: 15%

Self-Draining Sponge Holder V2 | Wave Drip Tray

BOM: Printed with ROSA3D Starter PLA Black Say goodbye to soggy, smelly sponges. This upgraded drip tray features a functional wave pattern that lifts your sponge (or soap bar) up, allowing air to circulate underneath and water to flow…

Print in Place Collapsible / Self-Inflating Christmas Ornament

🎄⭐ Print as is, no supports and layer-height .15mm (the lower, the better, as it results in more stable overhangs. More than .3mm and model will not slice correctly), 100% infill. Also you might need to slow down your speed as this model…

Self Centering Drill Guide

Thanks for checking out my model! You'll find all the details, instructions, and recommended print settings below. If you enjoy my designs and would like to support my work, feel free to buy me a coffee . I'd really appreciate it! Happy…

Cable Clips Collection - Self Adhesive - 4 Variations ( Parametric )

Electric Cable Diameter 2mm -> 6mm, mounted using double sided tape The STL files are scalable

Universal Clip - Self Tightening

3D-printable clip-on clamp to quickly mount and tension backdrops & greenscreens on a cameraset without damaging the material! Can also be used for tarps, banners, mesh screens, shade cloths, camping covers, towels, etcetera to the ground…

Self-leveling cup holder for TFK stroller

Designed for TFK Joggster Adventure. The holder prevents the cup from tilting in all directions and also uses printed “springs” to compensate for movements in the vertical direction. Dimensions Inner diameter of the holder is 75 mm. The…

Self Watering Planter

Print Instructions Filament: PLA or PETG Supports: None! All my designs are created to 3d print without support. Perimeters: 3-4 (to achieve watertight seal) Layer Height: 0.15-0.3mm And finally …. share a picture of your print in the…

BDSM Modern (self) Bondage Fiddle with rotating hand-holes, parametric

Halloween selfie tea light jack-o-lantern

Prints in place, it has a hole in the bottom for an LED tea light, should hold in place by friction. I recommend printing with 4 walls (so the lithophane part is solid) and drop the model 2 mm below the build plate for a flatter bottom…

Gridfinity mini nipper holder (self contained)

2x2 version of Zack's nipper holder with the angle of the holders tweaked so they fit inside a 2x2 square. If you have long tools they will still stick out of the 2x2 area but not nearly as much as in the original (which works better in…

Self watering insert

Rescale this model as needed, I made the walls a little bit thicker than needed in the default scale, so unless you scale it to be very small, it should still get at least 1-2 perimeters. Check the preview after scaling! If you change the…

Drill Dust Collector (Strong Self Holding !) for Bosch, Festool, Hilti, Makita, Milwaukee,...

Please as a simple return for the job... Like, Share, and Post your prints ! Thanks ! Optimized for printing vertically like a breez.. No supports needed ! ;) Original file fit on 35mm diameter tube (Festool, Bosch,…) Update 05 November…

Self-Watering Planter (Small)

Introducing the first design from Parallel Goods. This Self-Watering Planter is exactly the growing environment your plants need, while giving you flexibility in your watering routine. It’s super easy to use: just plant your favorite herb…

PPW Mk1 Self-Adjusting Gripper Plywood/Panel Carrier Clamp

PPW Mk1 Self-Adjusting Gripper Plywood/Panel Carrier Clamp Effortless Panel Transport: Experience unmatched convenience with the PPW Mk1 Gripper Clamp, designed to streamline your workflow and make panel carrying a breeze. Its innovative…

Self-Balancing Robot (Arduino)

A Detailed Parts List can be found in the description of the YouTube Video below: This robot does not require any supports to be printed. Designed by Kelton Serra (Build Some Stuff) in Fusion360.

Bonsai – Paint-It-Yourself

A blank, matte-white model inspired by the timeless art of bonsai. This DIY collectible distills the quiet beauty and meditative balance of miniature trees into a smooth, minimal form—perfect for slow, intentional painting and peaceful…

Round Self Watering Design Planter

A beautiful design plant pot with self-watering. Simply add the water to the reservoir and the plants will take care of themselves. There are holes in the storage compartment that allow water to flow into both planting chambers. 🚀 Support…

Self feeding open source filament pelletizer

Overview This is a filament pelletizer which converts old or unwanted filament into short pellets. It aims to be safe, tidy and easy to use. My favourite feature is the self feeding mechanism that is geared from the power drill input. To…

Buddha – Paint-It-Yourself

Buddha – Paint-It-Yourself Figurine A blank, matte-white model inspired by the serene presence of Buddha, designed in a calm, minimal form for mindful painting. This DIY collectible invites peaceful reflection and creative…

Sea Otter – Paint-It-Yourself

Sea Otter – Paint-It-Yourself Figurine A blank, matte-white model inspired by the playful and peaceful sea otter. This DIY collectible captures its floating charm in a smooth, minimal form—perfect for creative painting and fans of…

Self-centering drill guide

Let me introduce my new 3D-printable tool, designed to guarantee you maximum precision when centering holes and drawing guidelines on the thickness of any panel! This tool is the ideal companion for woodworkers, hobbyists, and makers.…

Cube Background Panels (self assembling)

The original cube background panels look wonderful, but I really wanted panels that assemble into a cube and I also wanted to spend less material per panel. So I made my own version. Simply print three or four panels and slot them…