677 modeli
No matter which Artillery Sidewinder X2 review I saw - all, myself included are unhappy with the original Artillery Filament spool holder. It is wobbly, tends to fall apart, and the filament sensor holder is awkwardly positioned. Thats…
Wydruk około 1,33 €–1,62 € nettoWstępna wycena jednego wariantu
This is another option to mount a webcam to your Artillery Sidewinder X1 or X2. The two parts are very easy to print. I also designed a more advanced version. The my other design . And another streamlined variant, more stable and not as…
Wydruk około 1,30 €–1,59 € nettoWstępna wycena jednego wariantu
Stabilizes the wobbly filament roll holder from Artillery. Print and clamp in between when the original filament holder is installed on the printer. If you like to replace the spool holder completely, see my newer design…
Wydruk około 1,00 €–1,22 € nettoWstępna wycena jednego wariantu
I created this model for the following reasons: Most mounts available are not made for use with Volcano. This design has the BL touch mount height appropriate for the additional length of the Volcano. The mounts that use the roller bolts…
Wydruk około 0,43 €–0,53 € nettoWstępna wycena jednego wariantu
Please leave a comment if you have any possible improvements to make to these profiles 😉👍 Print speeds? Benchy : about 45 minutes Calibration cube : about 13 minutes How import profiles? In PrusaSlicer Here is the link on how to do it:…
I have used this profile for big and small prints so its safe and tested you can see the result from this profile on my instagram page https://www.instagram.com/smotech3d/ ! The only think you need is to level your bed your correct and…
I couldn't find a nice bed template for the sidewinder x1. I hope you like it.
When I was looking for mods for my artillery sidewinder x2 I had to look for them one by one, that's why I have made this compilation of all the mods that my artillery sidewinder x2 has. The vast majority of these designs are not mine, so…
Quick remix of this brace to fit the new screw hole position of the sidewinder X2. To be clear this will not fit with the second part of the brace from the original (threaded rod.) There are now braces that fit correctly for the X2 if…
BEFORE IMPORT CONFIGS YOU NEED TO HAVE KLIPER 0.4 PRINTER ON ORCA , IF YOU DONT HAVE THIS AN ERROR WILL POP UP THAT SAY 0 CONFIG IMPORT (SEE PHOTO) I have used this profile for big and small prints so its safe and tested you can see the…
Knife and fork sidewinder for camping and outdoor trips. You can also just use it as a fidget toy! Simply flip it out with a quick upward move of your hand, or slide the left side up! The blade and fork are easy to replace because…
I created a new pipe for the 5015 fan. It is printed without supports. On the triangular surface where the fan is mounted. This one is with ball bearings. The flow is much better than with the original fan. The fan is at an angle. It…
Sidewinder X1 Bed Side Cable Chain Relocation Preparing to put my Sidewinder inside an enclosure I was not happy with the space taken up at the back of the printer by the bed wiring and needed a solution to fix the kinking from the stock…
I wanted and improved fan duct that does not interfere with the Waggster Mod for BLTouch. Combined the two in Tinkercad. Credits should go to the creators of the original desigs. Print instructions Unassociated tags: Sidewinder X1,…
The idea with this mod is to rotate the bed 90°, so that the bed wires come out the front right side instead of the back. That way, they can travel over the case rather than behind it, allowing the printer to be pushed back closer to a…
Download ZIP, not STL Extract ZIP Open ORCASLICER FILES -> IMPORT -> CHOOSE FILE : SW X4 PLUS(or PRO) S1 - HAROVLEYGE.orca_printer For max speed (500mm/s and 10k mm/s) use fast filament settings.
Fits into an Odin Innovations M12 Sidewinder and allows you to easily fill any mid-cap mag faster than any other speed loader. Print with supports from the flat cylinder surface, supports can be easily removed and won't cause problems if…
Check out the detailed guide over at 3dprintbeginner.com! Edit 2021-04-14: Drill guides updated to allow improved clamping. Just thread an M3 or M4 screw through two or three of the roller wheel holes to fasten the jig securely against…
AIM-9L Sidewinder I wanted a good replica of a sidewinder, but could not find any. So I made one. Its based off some very bad drawings so some measurements might be slightly off. The model is split into logical parts for easy printing. I…
This is a two piece mount for a 5015 fan upgrade, for a stock Artillery Sidewinder X2. I designed this to be easier to assemble, and to use the screws that came with the SW-X2 to attach to the printer. Designed for nut Size M3-0.5mm…
These profiles were fine tuned for the Sidewinder X1 and Artillery Genius. These should be good for most machines which use the stock extruder assembly. With some small tweaks, the same profiles should work on upgraded machines. Because…
Sidewinder model from Elite: Dangerous Model is split into two parts at the widest point and down the centre to permit better printing Point the two halves vertically at the seam This work is strictly fanart and not meant for commercial…
Adjust your extrusion multiplier if is to tight or to loose. Remixed from https://www.thingiverse.com/thing:3824154
I've had some tough times getting the sidewinder x2 fully tuned. This helps so much with getting everything to run smoothly. Instructions Follow Ethereal Project 3D 's instructions in this video. Squaring the gantry on the Sidewinder X1…
This is a simple file for 300x 300 mm beds to check the bed leveling.
Remix of https://www.thingiverse.com/thing:4584743 for use with 5015 cooling fan. Haven't actually printed this yet! Print at 0.2mm layer height or below for best overhangs. EDIT 2020-12-12: The first version of this duct was completely…
A modified spool holder for filaments that can be printed without support. To get a top smooth surface, I used Polymakers 'Polysmooth' white filament and polished it with the Polysher. After polishing, several days of 'curing' (=waiting)…
Remix of Atoban's Side Spool System for Sidewinder X1 updated for the Sidewinder X2. Artillery added the plastic across the top of the gantry so the X1 design doesn't fit. Additionally, the frame piece spool holder needed trimming so the…
This is a model based on Motogeepie's amazing design. (https://www.thingiverse.com/thing:3927320) After trying half a dozen of various ducts I have settled for this. I have been using this duct for the past 2 years and I am very satisfied…
This is a much more visually accurate 2D texture of the Artillery Sidewinder X1 & X2 build plate for PrusaSlicer. The included 3D model was made by alpo16000. Some might call it unnecessary, or maybe obsessive. But I have the ability and…
With this part, the Artillery Sidewinder X3 Pro can't make the nozzle cleaning without hiting the side and losing his home position. 📺 Video showing it (FR) 👉 https://youtu.be/9OkGZgRqOuI
I created this model from that of dragonbleu13. For the Sidewinder X2 and I reduced the thickness so that it is more adjusted to the rail. I install this system in the video https://youtu.be/4f2FGK47Qi0 Maj 12/01/2022 : Add Kit Z and Y…
Part cooling fan shroud for the Artillery Sidewinder X1... Wanted something small, lightweight and semi-circular. This is a remix of this https://www.thingiverse.com/thing:3923283 which is a remix based off the original Prusa mk3 design.…
I love this duct for artillery, i dont found good fanduct on PrusaPrinter, so i give one ! Good cooling and easy mounting Print the duct with PETG or ABS or ASA ! Bracket you can use PLA ;) The creator is iPa64 on thingiverse ! :…
***Update 8 Oct 2022 Another revision of the geometry and the wall thickness of the duct. I had some vibration that was happening under full fan power. I've changed the density of the connection points to the main plate as well as adding…
I added tabs to Upper_Bracket and now fits on the original screws from the printer. You need: 2 x Upper_Bracket 1 x Z_Axis_Lower_Bracket_SWX2_Part2 1 x Z_Axis_Lower_Bracket_SWX2_Part1
Combinable with Artillery Sidewinder X1 X2 Parts -Beagle Camera Holder -2x Screw D3
This Camera Mount attaches your Webcam to the X Gantry! The “NebulaScrew” is needed anyway - and regarding the "NebulaMount" there are a few different versions: X4 Short (50mm “arm” length - camera gets blocked by extruder while homing)…
The original cover suffocates the extruder from air causing it to overheat overtime. It does not use the 5015 blower fan to its full capabilities due to the poor airduct design. My design allows the full hotend assembly to breathe and the…
This sensor mount is used for Artillery printers like the Sidewinder X1 and Genius. Using this mod, you can achieve Auto Bed Leveling on Artillery Printers for FREE using only stock parts (as long as you have a PEI Sprint Steel Sheet…
Según los manuales de ensamblado, se sugiere que el cable del extrusor vaya por detras, apoyándose en un clip que va sobre el motor izquerdo de Z. Lamentablemente esto ocasiona que el cable se doble y deteriore cuando el extrusor hace…
!!! I made a big mistake and uploaded a version without hollowing out the tubes. !!! I uploaded now the corrected version. A fan duct for the Sidewinder X2 with an E3D V6 and Volcano Hotend with Artillery BL sensor mount. After upgrading…
A parametric FreeCAD model with 60mm squares over the leveling touch points, connected with 10mm strips. Also that model exported 0.31mm high for printing with thick layers on wide nozzles. This should be useful on any 300mm square bed as…
Bed Level Test zum Testen der Druckbett kalibrierung. Verwendet mit Cura. Die Datei ist erstellt für den Sidewinder X1. Ob er auch bei anderen funktioniert, kann ich nicht beurteilen, eventuell mit passender Skalierung. Sollte das…
Soportes superiores e inferiores para barras estabilizadoras de Artillery Sidewinder X2 Material necesario: 2x Barras de 12mm de diametro y 591mm 4x tuercas M3 4x Tornillos M3 con 10mm creo que sobra
For a long time I was looking for a solution to the layer lines that were present in all my prints ever since I bought the printer. As it turns out our cheap printers with their trapezoidal lead screws are horrible in this regard. I…
Artillery X1 & X2 replacement - might fit Genius (not sure) For using 5020 blower fans. I used 5015 fans and they are all very loud so had this fan already and found it much better in every way. I can run it at 40-50% and it still quiet…
I was not happy seeing how the cable on the extruder was hitting the Z-Rods and the Top-Bar while homing X and while printing near Z-Max (with the original cable clip the cable touches the top bar at around z=20cm. So it was time for my…
If you find this thing useful, please consider sending a tip. Thanks! https://paypal.me/cdsmakestuff Easy Upgrade for the Artillery Sidewinder X1... For the size of the bed, the leveling wheels on the ASWX1 are tiny... My CE3Pro has…
Fillament Spool Holder with Fillament runout sensor attachement. This was designed for my Artillery Sidewinder X-1, but should fit a range of 3D printers. It attaches to 2020 and 2040 aluminium extrusions. Specially designed for those…
Replacement gear for the Odin M12 Speedloader. I reinforced the size of the paddles by removing one of the original six. You dont feel any real difference while loading, it is almost as fast as the original gear. You can load 10 BBs with…
This part was designed to mount your Raspberry Pi to your Artillery printer using this excellent Pi Case with siderails designed by Sneaks: Modular Snap Together Raspberry Pi 2B/3B/3B+/4 Case w/ OLED & Fan Options No additional hardware…
Mounted with four M3 Screws Print Settings Printer: Artillery Sidewinder X1 Rafts: No Supports: No Resolution: 0.2 Filament: M4P ABS-PC Category: 3D Printer Parts
1/6th scale AIM-9 Sidewinder model which can use 18mm model rocket motors to fly. It is currently untested so FLY AT YOUR OWN RISK. Materials: -1 Fincan -1 Nosecone -2 Airframes -1 Launch lug (attaches to launch rod) Parts may require…
Interesante y estetico gabinete para suplantar el original de la Artillery sidewinder x4 pro Mejor visualizacion del nozzle Acceso a la rueda dentada del extruso Mejor ventilacion Se compone de 3 partes que se deben pegar con cianocrilato…
During a print, the idler arm of the extruder tilts and which causes uneven extrusion and under-extrusion. As a result of it, the print fails. One of the pictures is clearly visible how the arm skews to the left without the fixture…
you will need 2 MGN9 360mm rails for the x axis, 2 MGN9 480mm rails for the y axis and 6 MGN9C blocks: https://s.click.aliexpress.com/e/_DDRpCQP you will also need some m3x8mm screws: https://s.click.aliexpress.com/e/_DFWx7UR m3 t-nuts:…
I rebuilt it because the original one was broken, I tried to update it for better ventilation and cooling. You can mount it with metric 3 inserts, I also recommend pet-g material.
Since original part tends to break at mounting piece, I've spent some time modeling it to fit to the original space. Working fine for few weeks now. As I had no working cooling during print I decided to use PCTG for printing and it worked…
This is a brace for the Filler Spool Holder by HugoHuge to work with 2040 aluminum extrusions instead , such as those used by Prusa Bear, Artillery Sidewinder X1, or Artillery Genius. It's based on the brace for the Prusa MK3S so it has…
This new mount repositions the Filament Runout sensor, because the original one guides the filament directly onto the extruder cable connector on the extruder. It basically is a 20mm extended part, made to be printed without support and…
The Artillery Genius Pro+Sidewinder X1 & X2 Z Axis Snap Fit Crown Cap is a remix of a part of my own model, which is quite different from the original, for the Replacement parts contest. The Z-Axis Caps are easily dressed on the top of…
Custom filament spool holder for Artillery Sidewinder X1, perfect fit with existing ball bearings.
I “remixed” the original extruder lever brace from https://www.thingiverse.com/thing:3935900 . Main reason was to be able to mount a ADXL345 sensor. I had to calibrate klipper3d with help of this sensor. You can just put the ADXL345…
Meet the friendly face of the desert: a sidewinder rattlesnake that slithers right off your print bed. 🐍🌵 This little sidewinder is fully articulated and prints in one piece, no supports, no assembly. Every segment along its body flexes…
Easy to print raspberry pi camera mount for Artillery Sidewinder printers. Perfect to monitor the first layer and high prints which my other static setups didnt. Tested on a Sidewinder X2 but should work on a X1 also. Please report back…
I have seen several files that are individual pieces to cover the slots but I wanted something to completely hide the slots and the screws. I came up with this solution. Print Settings Printer: Artillery Sidewinder X1 V4 Rafts: No…
After buying a bigger spool and not being able anymore to put in on the printer i hanged it upside down. Now there was a need to mount the sensor directly under the spool. A M3x15mm screw is needed to mount the sensor to the holder.
Hier habe ich die Filamentführung sowie den Filament Sensor so platziert, dass das Filament von einer höheren Position zugeführt werden kann. Alle benötigten Kugellager und Schrauben sind im mitgelieferten Filamenthalter enthalten. Die…
I found myself in the circumstance of designing this piece with priority, since it stopped a mass production. Design based on the damaged original part with some improvements for its correct operation. The design adjusts to the pressure,…
This is designed to be a sidewinder motor pod for1/32 slot cars. The bearings snap in. Some minor sanding may be necessary under the mounting points due to support removal. Update: I narrowed it slightly to help with mounting and…
My changes made a part out of the two parts and converted it for a 5015 fan. I used M3x25 screws to attach the fan and M3x8 to attach it to the printer Print Settings Printer: Artillery Genius Rafts: Doesn't Matter Supports: Yes…
I'm not a fan of the TFT screens that ship with the Artillery printers, so I decided to replace them with slick little mini12864 displays from FYSETC and BTT (FYSETC v2.1, BTT v1.0). These displays give you a control knob which I really…
This is a remix of a x1 fan with the following improvements: -> Split duct for each side so it has an even distribution of air. -> Space for the level sensor -> And it is gripped by a screw so there is no need for glue or risk of falling…
Clamp or screw you webcam on it, clamp it below your front right printer feet. Versions V3.2 13 cm height 1 cm extra bed distance 33 degree smoothed edges V3 12 cm height 45 degree ¼" screw hole Easy to print, no supports, I used 15%…
Introduction The Sidewinder flying ring was inspired by commercial products like the Wham-o Turbo-Tube, the Skyro, the Toobee, the Zoom Toob and the X-Zylo. The novel design improvement here is the airfoil cross-section of the leading…
I was height challenged on the shelving I mounted my side winder on (stock spool holder was too tall), and I didn't like having to use a tool to to adjust if for different spool sizes. So I designed this.... This is meant to feed in an…
This is an adapter for 4 mm PTFE hose so that the filament roll does not have to stand on the frame of the Sidewinder X1. You can then use the spool holder of your choice and don't have to adjust anything. (My printer stands on a higher…
This is a very simple design, but in conjunction with the filament modifier made by @weintdeir, it ensures that the Artillery X4 reaches its maximum height without the flex cable suffering when hitting the upper bridge. On the other hand,…
This is a remix of Runout sensor bracket SIDEWINDER X2 by LeLudoLAb on Thingiverse: https://www.thingiverse.com/thing:5027268 I install this system in the video https://youtu.be/4f2FGK47Qi0 Print Settings Printer: Artillery Sidewinder X2…
This remix for Artiller Sidewinder X4 Pro/Plus permit to mount the TZ Bambu clone hotend. You can use v2.0, v3.0, v4.0. Also Bambu original, Obxidian, Chimera, Phaetus, Biqu Panda Revo, Microswiss and every hotend for Bambu P1/X1 printers…
I needed a Beagle camera mount for my Sidewinder X2 and didn't have any space on the table to place it in front of the printer. I took the mounting plate from Beagle Camera Stand and the arm from the NoIR Camera Holder so I can mount it…
Il s'agit d'un remix de la version Prusa Mk3. J'utilise ce système sur mes Prusa et je n'ai pas trouvé d'équivalent pour la Sidewinder, j'ai donc fait une adaptation ^^ Il s'agit de leds en 24V, branchées directement sur l'alimentation…
Hello, i make this Fanduct for better view to the Nozzle. Printed with supports and Artillery logo facing down. I use the Tree-Supports in Cura. It is better to remove. Fan 4020 2 M3x12 to install on Artillery 4 M3x25 to istall the Fan on…
An adapter to replace the native 2.8" Touch Display by the Bigtreetech TFT35 with SPI connector. Used for this Display: bigtreetech-tft35-spi Includes a front and a back part. Just print them, they will fit tight into each other and so…
Habe die Streben gekürzt damit sie zusammen mit der Version für die Gewindestangen montiert werden können.
The original cover suffocates the extruder from air causing it to overheat overtime. It does not use the 5015 blower fan to its full capabilities due to the poor airduct design. My design allows the full hotend assembly to breathe and the…
Bolt and Nut M3 13mm 2X M3 18mm 1X M3 20mm 1X M3 Nut 4X Screw head no higher than 2 mm M3 5,8mm 1X M3 3,7mm 1X Print instructions Supports: No Resolution: First layer 0.3 and the remainder 0.2 Infill: 25% Filament color: Black Filament…
This is a mount for the Hemera on an Artillery X1 (probably compatible with the Artillery Genius). HEMERA SCREWS: 2 - M3X8, 4 - M3 X12 + (4-8 WASHER M3, They will be to separate the screws that support the Hemera motor and prevent them…
This is my solution for a simple but yet lean Hemera adapter for my Sidewinder X1. The idea was to have one simple part for the whole Hemera extruder that: is one part that can be mounted / removed easily without loosening the screws…
This is a Remix from : https://www.printables.com/de/model/164491-2060-extrusion-mount-for-logitech-c270-camera You need no Suport for printing
Hello, this is a Remix from there : https://www.printables.com/de/model/73320-sidewinder-x1-dial-indicator-mount Atillery X1 or X2 Genius Digital Gauge : Neoteck Digital Messuhr 0-25,4…
Didn't like the existing fixes, because they either include drilling holes or don't fit to the design. You will need two 500mmx12 mm rods & all screws needed to assemble are 5mm longer. I used carbon rods with raw finish as it has the…
I wanted to convert my Artillery Sidewinder X1's Y-axis to linear rail. I didn't find a good version so i designed my own version. The file "Bohrplatte" is a drilling guide where you need to drill 3mm holes. You don't need to drill all 12…
Here are some comfortable feet to raise the printer and have better ventilation of the motherboard. I recommend gluing some non-slip rubber pads underneath.
I have made some modifications to 2 models in particular, one by a great designer Bockobg https://www.thingiverse.com/thing:6596529 And the design by artillery. The case allows the disassembly of itself, without unplugging the flat cable…
Standfuss für den Sidewinder X2, kann auf die vorhanden Füsse aufgesteckt werden.
Belt clip gt2 in short and long version. Requires a zip tie width of max. 2.5mm. The clip teeth have the original gt2 profile. I designed the clip for the Y-axis of my Artillery Sidewinder X2 printer (I used the short version) but it may…
A mount for a webcam for a Sidewinder X1, although it should also fit the X2 I used an m6 bolt to attach the camera. Last pic shows bed fully extended Added an extended version for those that are using pei sheets with the tab at the front…
