Small Whistle: extremely loud
Small whistle for keychain, backpacks and other daily or safety equipment.
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
- Pobrania
- 15 523
- Polubienia
- 2803
- Ocena
- 4,91
18 378 modeli
Small whistle for keychain, backpacks and other daily or safety equipment.
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
Intro XXXS super-mini emergency whistle for your keyring! Only 32mm in size. Only 4min print time. SMALL but LOUD! Print a few of them and give them to your friends as emergency whistle. Why you'll love it? Very small - only 32mm Quick…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
/There are plenty similar designed wallets on the web but none fit my requirements 100% so I created my version. =============================================== 9/2/22 Added VORON Edition top and bottom.…
Wydruk około 2,91 €–3,56 € nettoWstępna wycena jednego wariantu
For larger screws: scale the hook up in the slicer
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
Tested in PLA
Wydruk około 0,21 €–0,26 € nettoWstępna wycena jednego wariantu
Hello I made this model to promote sustainability and to prove that you can live more ecologically even in a small flat or without fancy equipment. It's a Vermicomposter/normal-composter printable on a Prusa i3 with a maximum size in…
Wydruk około 6,13 €–7,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Intro This is a very compact, low-profile 90 degrees right-angle bit holder for standard hex bits . It is designed to reach screws where a normal screwdriver or bit holder simply does not fit. The special designed variable bit fitting…
Wydruk około 0,53 €–0,65 € nettoWstępna wycena jednego wariantu
Tests from 195 - 210 for PLA on my Ender 3 w/ a Micro Swiss Hotend. Remixed from ([https://www.thingiverse.com/thing:2729076) https://www.thingiverse.com/thing:2729076 %5Bhttps://www.thingiverse.com/thing:2729076)] for testing my Ender 3…
Wydruk około 0,60 €–0,73 € nettoWstępna wycena jednego wariantu
The idea was to have a simple and clean looking stand, which can hold bigger phones (5.5 inches for the phone in the picture) or phones which are protected by a thick case. I also made sure to keep this thing easily printable, without any…
Wydruk około 4,76 €–5,82 € nettoWstępna wycena jednego wariantu
📝 Description The Ruler Stop S is a compact and precise stop designed for 0.5 × 15 mm rulers , ideal for workshop use, model making, and DIY applications. To make it максимально flexible, the model is available in four versions (M3, M4,…
Wydruk około 0,42 €–0,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A new keychain for use with your smartphone. Small, practical and fun keychain with different forms of animals. In addition making a keychain, you can use it to stand the smartphone. https://youtu.be/VMJjUnYXQE4 I used this filament:…
Wydruk około 0,65 €–0,79 € nettoWstępna wycena jednego wariantu
I designed this f-clamp holder to store my clamps in the most compact way on the wall. This is the smaller version of LR2218 , for regular and small clamps. How to Print this Clamp Holder There is a Prusa Slicer example project ending in…
Wydruk około 14,40 €–17,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
About the Smart Storage basket: The Smart Storage slide-out hanging basket is used for storage of various items. It can be used to storage food in the refrigerator, in the office for storage of office supplies or in the garage for storing…
Wydruk około 2,20 €–2,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Now out! The HMS Hood that was sunk by the Bismarck! Get your model here: https://www.printables.com/model/776292-hms-hood (Printing and assembly instructions below) The German battleship Bismarck! Named after Otto von Bismarck and the…
Wydruk około 1,76 €–2,15 € nettoWstępna wycena jednego wariantu
A small remixed version of @SaschaUncia 's Parts and Crafts Organizer Box that fits on smaller print beds like the Prusa Mini+. My son needed a box to keep his components for Arduino tinkering separated/organized and it seemed like an…
Wydruk około 4,89 €–5,97 € nettoWstępna wycena jednego wariantu
🇬🇧 – English – A collection of 34 Christmas cookie cutters. Small ones, usually between 3.5 - 5 centimeters big. Collection includes: angel bell candle candy church comet cookie cross fish glove hat heart house moon mug ornament pig…
Wydruk około 1,54 €–1,88 € nettoWstępna wycena jednego wariantu
printed with PLA, but can be Petg or TPU. TPU would be best choice. If you need some help, or need change the sizes please contact me
Wydruk około 0,78 €–0,95 € nettoWstępna wycena jednego wariantu
Layer Height 0.2mm. Perimeters 3. Infill 15%. No need for supports.
Wydruk około 0,23 €–0,29 € nettoWstępna wycena jednego wariantu
A mechanical wound tracker / counter printable with 0.4 nozzle. It maxes out at 49 but is small enough, to have it on the battlefield near your operatives. Only one M3 x 8 screw is required for assembly. Some grease is recommended but not…
Wydruk około 0,37 €–0,45 € nettoWstępna wycena jednego wariantu
A remix of LoboCNC's Gravity Broom Holder , integrating 3 and 4 holders within a single block. For compact storage of multiple brooms or other tools, requiring fewer screws for mounting on the wall. Adjacent holders have been slightly…
Wydruk około 0,52 €–0,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is my take on path markers for the Arkham Horror LCG. As I do not have so much table space, I wanted to have small markers, which can be placed inbetween the cards without having to spread the cards too much. The single and double…
Wydruk około 1,41 €–1,73 € nettoWstępna wycena jednego wariantu
Smart holder adaptér držák vychází z originálu, který byl modifikován pro sportovní sedadla vozidel značky Škoda, včetně pojistky proti vyndaní pokud je vložen držák multimédií ;) postup: tisk z PET-G (z důvodu vysokých teplot ve voze v…
Wydruk około 3,90 €–4,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you're anything like me you bought a few wall hooks, used them once, and don't know what to do with all of the extra adhesive strips. This wall hook is designed to fit the small 3M Command strips and hide the pull tabs like the…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
Smart holder adaptér !!!POZOR - pouze pro Colorprint!!! držák vychází z originálu, který byl modifikován pro sportovní sedadla vozidel značky Škoda, včetně pojistky proti vyndaní pokud je vložen držák multimédií ;) postup: vložit model a…
Wydruk około 5,10 €–6,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
[ENG] Tatra 813 is a Czechoslovak special heavy off-road truck, produced between 1967 and 1982. The basic representative of this type series was primarily the military version 8×8 KOLOS, which was capable of pulling trailers up to a total…
Wydruk około 0,97 €–1,19 € nettoWstępna wycena jednego wariantu
A holder for an X6Play smartwatch from Xplora. Printed with Organic support. Have fun!
Wydruk około 2,21 €–2,70 € nettoWstępna wycena jednego wariantu
A new keychain for use with your smartphone. Small, practical and fun keychain with different forms of animals. In addition making a keychain, you can use it to stand the smartphone. https://youtu.be/VMJjUnYXQE4 I used this filament:…
Wydruk około 0,71 €–0,86 € nettoWstępna wycena jednego wariantu
Eine einfache kleine Aufbewahrungsbox mit Deckel aus PLA. Ist fast ident wie meine Feuchttücher Box, nur der Deckel hat mehr Spiel und für das Gelenk habe ich 2x Schrauben M3x12 mit 4x Beilagscheiben und 2x Sicherungsmutter vorgesehen. A…
Wydruk około 2,19 €–2,68 € nettoWstępna wycena jednego wariantu
A small desiccant Box with 1mm wide gaps and a sliding opening. 90 x 45 x 19.8mm (Base) 90 x 45 x 13.5mm (Short)
Wydruk około 2,10 €–2,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Dieser speziell entworfene Adapter ermöglicht es Ihnen, Ihr Smartphone im Hochformat (Vertikal) sicher im Bosch Smart Grip Smartphonehalter zu befestigen. Damit erweitern Sie die Funktionalität Ihres Bosch Smart Grips und können Ihr…
Wydruk około 1,43 €–1,74 € nettoWstępna wycena jednego wariantu
I had some silica gel lying around, and I wanted to make a container for it so that I could use it in my filament drier. I was searching for a good one, but they all seemed to have large holes that would only work with larger silica gel.…
Wydruk około 0,81 €–0,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Info: another model of glasses with interchangeable lens with different patterns the nose area is more comfortable temple hinges are robust, with usage of piece of 1.75 filement as a “screw” UPDATE : i created also temples more angled, so…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
This is a model of Luz's Palisman Stringbean from The Owl House with a collapsing staff. It is 83mm wide, 183mm long and 268mm tall. With the staff fully extended, it is about 1.4m tall. This remix is based on Stringbean Palisman - The…
Wydruk około 3,25 €–3,98 € nettoWstępna wycena jednego wariantu
Prusament PLA Galaxy Purple Fillamentum PLA Crystal Clear Smaragd Green Height: 270mm Staff Inset Diameter: 35mm Scale Accordingly No Supports Required Printed with 5% Infill
Wydruk około 4,13 €–5,05 € nettoWstępna wycena jednego wariantu
Track piece to extend this circuit. Short and medium rail have the same length that original parts. Half short is, as it sound, half the size of the short one. It usefull to fill gap in some cases. Print instruction: Supports needed for…
Wydruk około 4,68 €–5,71 € nettoWstępna wycena jednego wariantu
I was looking for a smartphone stand with the option to charge the smartphone while in the stand. Since I couldn't find one, I designed my own stand. The current stand is actually the 5th revised version. This version has a hole on the…
Wydruk około 3,42 €–4,19 € nettoWstępna wycena jednego wariantu
Conversion of hand version of plasma torch. JDM garage plasma or other compatible.Holes for magnetic breakout mount. STL files printable ond standart size printer 210x210 base plate space.Includes two alternatives in .stp files and Prusa…
Wydruk około 7,56 €–9,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A small antenna stand for propping up antennas with sma connectors. Set up your sdr or handheld radio antennas in a better position easily with an sma-antenna cable and this simple stand. Printing: Printing upside down is recomended to…
Wydruk około 0,72 €–0,89 € nettoWstępna wycena jednego wariantu
Miniature businessman for your diorama, architectural miniature or as a figurine. Man | Businessman | Architectural figurines | People | Person The businessman is suitable for 3D models of city or architectural diorama. Printable for the…
Wydruk około 1,02 €–1,25 € nettoWstępna wycena jednego wariantu
It's a pastry cutter. It's very simple. Height is 6.5 cm, width 6.4 cm and thickness 1 cm. I designed the cutter with a stamp that is suitable for fondant or butter pastry. Each can be printed separately or together to save space on the…
Wydruk około 0,79 €–0,96 € nettoWstępna wycena jednego wariantu
The hole pattern is 4xM4 20 mm cross. Matches the hole pattern on the bottom of the ASIAIR. Instead of mounting the air straight to the mount, you can mount the saddle and shoe the ASIAIR comes with. You'll need one M4x20 screw and nut…
Wydruk około 1,60 €–1,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A small carabiner to avoid losing small items. Printing time 4 minutes, filament used 0.18 meters Un piccolo moschettone per non perdere oggetti di piccole dimensioni. Tempo di stampa 4 minuti, filamento usato 0.18 metri
Wydruk około 0,07 €–0,08 € nettoWstępna wycena jednego wariantu
Small control horn for RC planes Printed in PLA or PETG with a layer-height of 0,12 mm. The 3mf and gcode files contain 4 control horns and 4 counter plates. They are printed as multiple parts in one pass to reduce stringing. Kleine…
Wydruk około 0,21 €–0,25 € nettoWstępna wycena jednego wariantu
I love the original “Tokens of Inspiration” by Conr8r but after printing it I discovered it was a bit too large and wanted something the size of a regular coin. I tried scaling it down to 50% and printing it laying flat, but the result…
Wydruk około 0,35 €–0,42 € nettoWstępna wycena jednego wariantu
This is a small storage tray that is meant to sit in the empty space above the gearshift in a 2022/2023 Subaru BRZ and (possibly) Toyota 86 (assuming the interiors are the same). It is meant to add a small amount of storage for something…
Wydruk około 3,08 €–3,77 € nettoWstępna wycena jednego wariantu
[EN] Sometimes it happens that a visitor comes with children who are bored and need to be entertained somehow. In such a case, simple and easy to print toys come in handy, where the child is entertained both by watching them print and…
Wydruk około 0,60 €–0,73 € nettoWstępna wycena jednego wariantu
Small, easy-to-open pill box with bayonet catch and various lids. Dimensions: Lid Diameter 44.00 mm Height 11.00 mm Box Diameter 40.00 mm (inner diameter 34.00 mm) Height 30.00 mm (height inside 28.00 mm) Total height 32.00 mm Print:…
Wydruk około 1,97 €–2,40 € nettoWstępna wycena jednego wariantu
Vyrobil jsem si vlastní žetony pro hru Connect 4. Mají podobu smajlílů :-) I made my own chips for Connect 4. Have the form of smiley :-)
Wydruk około 1,53 €–1,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A quick and easy to print stand for my Hisense smart Roku TV's remote that holds it up at 15 degrees off vertical.
Wydruk około 1,01 €–1,23 € nettoWstępna wycena jednego wariantu
I was informed my previous version https://www.printables.com/model/728282-ergonomic-grip-for-miyoo-mini-plus-multipart-for-m was too big for some smaller hands so I crated this version (and a stand to go with it). Print with brim and…
Wydruk około 5,91 €–7,22 € nettoWstępna wycena jednego wariantu
Print, assemble and program your own intelligent Smart Plant Pot. With a hidden water reservoir, pump and sensors why not make your plant care easy. With an Arduino Nano at its core this project uses a water level sensor to let you know…
Wydruk około 5,55 €–6,78 € nettoWstępna wycena jednego wariantu
I liked the original clip, but found it to be bigger than my needs. You can not simply scale down the model and print naively, since this will also scale down the size of the spacing between the prints, resulting in a fused print. My STL…
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
Hi! This is my small climbing hold. It is supposed to be a drawer handle, do not use it for real climbing!! Its dimensions are approx. 40 x 30 x 15 mm and it should fit screws with an M4 thread. How do you print it? The surface of it…
Wydruk około 0,45 €–0,54 € nettoWstępna wycena jednego wariantu
Fits 6 lids
Wydruk około 1,77 €–2,17 € nettoWstępna wycena jednego wariantu
I created this Losmandy style camp, so I can attach whatever I like on my OTA. I found some others on the internet, that did not clamp enough or used imperial sizes. This is a remix clamping better for me and using regular nuts and bolts.…
Wydruk około 3,10 €–3,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Carefully set up your printer! Because 1/2 UNF thread will be printed. My settings are: Resolution 0.15 Perimeter 4 Without any supports Included 20mm Brim on the outside only I used Prusament PLA Simply Green . You can easily use other…
Wydruk około 6,95 €–8,49 € nettoWstępna wycena jednego wariantu
A stackable container designed to keep small parts organized during making, repairing, or disassembling tasks. Features a space-efficient design for storing spare containers and is easy to print using vase mode. Size: 8cm x 8cm x 4cm…
Wydruk około 1,00 €–1,22 € nettoWstępna wycena jednego wariantu
This is made for ShopVac or any other vacuum which uses a hose with an internal diameter of 1.5 inches (38 mm). I made it specifically to fit into the slots on the base of my drill press, but of course it can be used to reach other hard…
Wydruk około 1,58 €–1,93 € nettoWstępna wycena jednego wariantu
A Tiny Temperature Tower A small temperature tower you can tune to your liking, using OpenSCAD's customizer. I've included gcode for the Mk4 with input shaping. If you'd like me to provide a specific configuration of temperature range and…
Wydruk około 0,26 €–0,31 € nettoWstępna wycena jednego wariantu
(Note: Only usable for Prusa MK3 printer models with round rubber feet) Got your MK3, but tiered of the rubber feet falls off every time you move it! No more! Just lock your rubber feet in place with this easy Smart Lock. Installing: No…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A small, nice and quick pot for your lovely cactus or other small plants. Happy printing.
Wydruk około 2,05 €–2,51 € nettoWstępna wycena jednego wariantu
A small Hook for the small version of Tesa Power-Strips. Can be mounted horizontally or vertically. Can be used as a cable hook / under-desk hook as well.
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
Diseño del enganche de la maleta de herramientas Mannesmann 215, la parte de la pinza.
Wydruk około 0,94 €–1,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a complete set of additional, or replacement, animal tokens for Agricola All Creatures Big and Small the Big Box . The tokens and markers are modeled after the original game pieces to be the same size for compatibility. We…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu
A rear window spacer for the Smart (453) and the Smart EQ Fortwo. It's used to keep the rear window open a little bit, perfect for summertime. I would only drive with it if it was an EQ model, otherwise exhaust fumes may get into the car.…
Wydruk około 1,91 €–2,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Der Sunlu S1 ist nur für die 1kg Standard-Spulen vorgesehen. Um auch die kleinen 250g Spulen verwenden zu können, entwarf ich diesen Adapter. Nachdem die Spule auf den Adapter gebracht wurde, wird dieser nur zusammengesteckt und in die…
Wydruk około 8,77 €–10,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Riser stand for PetLibro Automatic pet feeder Made this for my pet cats automatic feeder after talking to vet, elevating to 5 inch feeding level will help in eating/digestion. Material: PLA Infill Pattern: Gyroid Infill : 5% Additional…
Wydruk około 12,77 €–15,61 € nettoWstępna wycena jednego wariantu
A holiday gift box with only one way in: destruction! This is a one time use gift box. Put a pause just before the lid draft, insert your gift, and resume printing. Put another pause at the ribbon for a color change. The box size as-is…
Wydruk około 15,86 €–19,38 € nettoWstępna wycena jednego wariantu
With this rotary stacking container you can store small things - bolts and nuts for example. If you do not need the boxes, you can store them space saving. On both narrow sides of the container you can attach a label. There are some…
Wydruk około 1,87 €–2,29 € nettoWstępna wycena jednego wariantu
Moved to GitHub 2024-01-10: All future updates will come through GitHub: https://github.com/jon-le0234/DoomScroller The work started growing too fast to manage two projects each on Thingiverse and Printables, so moved everything into one…
Wydruk około 0,91 €–1,12 € nettoWstępna wycena jednego wariantu
Cases for small batteries. Models already created for: CR CR1216 CR2016 CR2025 CR2032 CR2450 AG AG3/LR41 AG4/LR66 AG13/LR44 Other 316 376/377 Note: all pre-configured models have 1 row with 10 cells. OpenSCAD file configured with this…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
Are you tired of the frustration that comes with tangled power supply cables? Look no further! This small cable organizer is the perfect solution to keep your power supply cables neatly organized and easily accessible. Designed…
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
This set stores, organizes, and speeds up setup for all the game pieces from Agricola All Creature Big and Small the Big Box . When everything is stowed in the box you can rotate the box in any direction, even upside down, and everything…
Wydruk około 4,16 €–5,09 € nettoWstępna wycena jednego wariantu
My version of a small parts drawer. The top and bottom have a bevel to make stacking easier. At least for the tool boxes I use, stacking two trays and a lid fit in most drawers. The lid is optional depending on usage. Updated to add more…
Wydruk około 4,26 €–5,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A scaled-down version of Piney29887's Cat Food Can Cover for the smaller 3oz cans of cat food. Keep that food fresh between meals! Add your cat's name to the lid with the new text tool in PrusaSlicer 2.6!
Wydruk około 0,53 €–0,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Can you believe that this is less than ten twenty lines of code? Printing it is as fun as tinkering with parameters! Actualy this one can be written in just two lines: for(i=[0:20:360]) rotate(i) translate([10, 0])…
Wydruk około 1,78 €–2,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printed from Prusament PLA – Prusament PLA Blend Viva La Bronze 970g | (prusa3d.com) Bigger version – Lion on the wall | Printables.com
Wydruk około 1,22 €–1,49 € nettoWstępna wycena jednego wariantu
Smart Gun: Aliens vs Predator
Wydruk około 3,45 €–4,22 € nettoWstępna wycena jednego wariantu
A simple tool for hand tightening SMA connectors. Now with a snap-on action for easier handling. Slide it on from the side or snap it directly onto the connector. No more wrench marks or struggling with tiny connectors!
Wydruk około 0,24 €–0,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ein Schmetterling, um eine geschlossene Fliegengittertüre nicht mehr zu übersehen. Es werden 2 Schmetterlinge benötigt, einer auf jeder Seite der Türe 8 Magnete 6mm x 1mm (2 je Schmetterling) Mit ASA gedruckt, um UV beständig zu sein. A…
Wydruk około 0,49 €–0,59 € nettoWstępna wycena jednego wariantu
A small shelf that I use to put one of my PC speakers on. It could be used for anything else. It can be mounted to the wall using some 4mm screws. The dimension in the filename refers to the diameter (measured from the side) of the round…
Wydruk około 4,81 €–5,88 € nettoWstępna wycena jednego wariantu
Multifunction stand for laptop, tablet, and smartphone , designed to organize and optimize your workspace. Its minimalist wave-shaped design allows you to hold multiple devices at once while ensuring stability and proper ventilation.…
Wydruk około 9,47 €–11,57 € nettoWstępna wycena jednego wariantu
I recently found a nice stand for my iPad by countryskipper , but I had some small issues: It didn't fit my Prusa mini at original scale and scaling it down lowered the available space for the iPad. It was a bit too unstable for my…
Wydruk około 7,13 €–8,72 € nettoWstępna wycena jednego wariantu
There are plenty of Tie Fighter models to be found. This remix was created to make it easier to print at a small size. The wings are thicker, the central beams have been simplified. This hopefully makes the print less fragile and…
Wydruk około 0,21 €–0,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a simple snap case for the Adafruit OLED Graphic Display (SSD1306) (.96") 128x64 character OLED display or any similar .96 display. The design is meant to be small/compact and snap closed. Only the standoffs are exposed. The case…
Wydruk około 0,47 €–0,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Minimal remix of the ground hook by 3D_Onkel. Remodeled to be printed flat for optimal orientation of the layer lines against expected forces. Uses less than 50% of the original material. Safely anchors to the ground due to rehooks.…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The mout should work with all Garmin GPSMAP devices (tested with GPSMAP 65s). The mounting holes are spaced accordingly (31x41mm, ⌀ 5mm). The mount is very tight initially, but it gradually becomes a little looser and easier to put on.…
Wydruk około 1,30 €–1,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print Tips: No Brim Added a modifier around the head to include 6 perimeters to help strengthen the clasp. Used organic supports in the mouth with a paint on brush in Slicer on just the edges. Dragon Bracelet that fits the wrist of a…
Wydruk około 2,59 €–3,17 € nettoWstępna wycena jednego wariantu
A small containers of approximately 1 cubic inch, for small SMD components which can be easily endlessly connected to each other in both directions, to form array of small boxes for electronics component storage. 3D print as much as you…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
Pentax 100 SDUF is a classical imaging telescope, however, with the helical focuser that I detested. The default gear of Smallrig mini follow focus 3010 is 0.8 mode with 43 teeth, by adding the follow focus to Penatx 100 & changing its…
Wydruk około 0,87 €–1,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Bin filler and part dispenser for Honeycomb storage system Functionality With this model you can fill up your storage bins easily and fast by just pressing the bins against the front lip of the slider. A spring will bring the slider back…
Wydruk około 8,74 €–10,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix of the Armory Forged Shell Ghost addons by Toukejin . The parts have been resized to fit the smaller ghost model by BoldPrintShop. Gcode provided is for the Ender 3 line of printers.
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
max 39mm / 59mm tealights Minimal filament consumption thanks to compact design Minimaler Filamentverbrauch durch kompaktes Design See also my egg cups in similar design Eierbecher in ähnlichem Design…
Wydruk około 0,55 €–0,67 € nettoWstępna wycena jednego wariantu
Um eine elektrische Luftpumpe im Kellerraum aufladen zu können, musste ein Regal in der Nähe der Steckdose her. Da diese Ablage meist keine Funktion hat, sollte sie möglichst wenig Platz einnehmen. Die Konstruktion kann deshalb flach an…
Wydruk około 1,09 €–1,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Fits Akro-Mils small plastic drawers, which can be found on a variety of Akro-Mils Plastic Bin Cabinets (i.e. 64 drawer, 48 drawer, etc.). Tray (vs. printed and/or stock dividers) prevents small parts from slipping underneath the…
Wydruk około 1,56 €–1,91 € nettoWstępna wycena jednego wariantu
I designed this model based on the iconic cartoon scene where Plankton is crushed by a foot, making a simile between the boot and the door, where in both cases the character is crushed, giving a funny and comical touch to this gadget.…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
Water your plants more evenly with this adapter/nozzle Arrosez vos plantes de manière plus homogène grace à cet embout d'arrosage Za pomocą tej dyszy podlewaj rośliny bardziej równomiernie
Wydruk około 1,25 €–1,53 € nettoWstępna wycena jednego wariantu
Clean your print bed often with IPA and need a helpful way to fill a 50ml spray bottle? This funnel is what you're looking for as it will fit that bottle opening perfectly. .m3f and .STL files included if you wish to scale to a different…
Wydruk około 0,52 €–0,64 € nettoWstępna wycena jednego wariantu
Here is a small pop filter for a Shure SM58 type microphone. --- It's probably not the best sounding one but it does the job, it's small, quick to print, easy to realise and in one piece. Update => The empty round version offers better…
Wydruk około 0,90 €–1,10 € nettoWstępna wycena jednego wariantu
Print as shown in screen shots with flat (non-track) side down to plate.
Wydruk około 1,47 €–1,80 € nettoWstępna wycena jednego wariantu