1037 modeli
I love the look of these shelves, check how Tom created them: However, I wasn't a fan of the uneven and paper-thin back (even though I believe mechanically it doesn't matter). So I've made it completely flat and a bit thicker. I also went…
Wydruk około 7,17 €–8,76 € nettoWstępna wycena jednego wariantu
The story: Wanted to print small case for condoms which could be thrown in a bag and forgotten about without worry that the condoms will get damaged, because you know you should not keep condoms in a wallet. I could not find a single…
Wydruk około 1,74 €–2,12 € nettoWstępna wycena jednego wariantu
Update 2024 April There are two new G-Code files. First of all they now have the seam on the back. Also I added one with 0,1 mm layers so you have that at hand. Also while being at it I fixed the bases of the models, all STLs now have a…
Wydruk około 4,16 €–5,09 € nettoWstępna wycena jednego wariantu
Globe stand is compatible with all lamp globes by @FritzPeppone published here: https://www.printables.com/model/1087513-solar-system-lithophane-planet-lamp-collection Compatible with E27 bulb socket adapter like this one found at OBI:…
Wydruk około 6,12 €–7,48 € nettoWstępna wycena jednego wariantu
I have designed this box for condoms, tampons and stuff which is almost perfect: https://www.printables.com/cs/model/371842-smooth-pocket-case-for-condoms-durex-tampons-etc The only downside is that you have to trim the corners of condom…
Wydruk około 1,82 €–2,22 € nettoWstępna wycena jednego wariantu
I am doing a series of remixes of this model; this is my US flag version Please see additional print info. in the included PDF Please post your make with the “Post A Make” button (below the “DOWNLOAD” button) on this page :D Please hit…
Wydruk około 10,51 €–12,85 € nettoWstępna wycena jednego wariantu
Large spool holder. PTFE contact. No spool swinging. Maximum spool size is 105mm width at the axis. There are two configurations. One is for 300mm max diameter spool, then usual 2.2kg spool fits ( SpoolHolder-rxxx - d300-I3D-1). The other…
Wydruk około 20,58 €–25,15 € nettoWstępna wycena jednego wariantu
Since the MMU3 can have issues if there is too much tension in the filament, an easy upgrade to reduce friction is to upgrade the plastic wheels in the spool holders. Skateboard bearings are great for this. To use this, you will need to…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
This is my favorite vase model. I hope you like it too. It cannot be printed in vase mode, but the model has been adapted to print it with multiple perimeters. The presliced model is 162mm x 158mm x 154mm. You dont have to remove the…
Wydruk około 12,61 €–15,41 € nettoWstępna wycena jednego wariantu
All the credit for this excellent design goes to @Teraflop .
Wydruk około 0,45 €–0,54 € nettoWstępna wycena jednego wariantu
Der Trichter passt perfekt auf dem WMF smoothie maker. Lässt sich einfach aufstecken. Gedruckt habe ich den in PETG 0,15mm mit Fuzzy Skin.
Wydruk około 5,00 €–6,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This a small version of the classic spline and whales design for drafting smooth contours. I made the Whales actually whales and magnetic for good holding power. (normally they are large lead weights). The design uses 15mm diameter…
Wydruk około 0,28 €–0,35 € nettoWstępna wycena jednego wariantu
This is a remix of Adam Kimmerly's (K6ARK) QMX/QCX/QDX/(tr)uSDX knob. The original K6ARK knob is an excellent design, it is low profile, light weight and makes the tuning knob very easy to spin giving the QMX more of a full size desktop…
Wydruk około 0,39 €–0,47 € nettoWstępna wycena jednego wariantu
I took the wonderful remix from Hotdogger and made a version that can work with the external MMU3 version of the Prusa Enclosure. Enjoy!!!
Wydruk około 7,08 €–8,65 € nettoWstępna wycena dla PETGMateriał u źródła: PET
PLA+ with 0.20 mm layer height worked perfectly for me the first time, but I think any material and layer height should work. It's not that complicated of a model.
Wydruk około 0,89 €–1,08 € nettoWstępna wycena jednego wariantu
ENG/ Self-explanatory, for the WMF KÜCHENminis Smoothie-to-go replacement foot. GER / Selbsterklärend, für den WMF KÜCHENminis Smoothie-to-go Ersatzfuß.
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
Design Concept The Duplo-style low bricks are designed for versatility and enhanced tactile engagement. Featuring a textured and a smooth surface, they are crafted to stimulate sensory play while remaining compatible with existing Duplo…
Wydruk około 6,59 €–8,06 € nettoWstępna wycena jednego wariantu
Design Concept The click smooth cover circle on a pelmet is designed to hold curtains securely while allowing easy gliding along the pole. Its smooth texture minimizes any friction, assuring effortless use. Inner diameter of this circle…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Phone holder allows for fine control of tilt. Probably overkill for some uses, but think this might be useful for video chat or work conferences where you want to get the camera angle just right. Link to adjustment demo GIF:…
THE RUNNER WITHOUT THE “13” HAS BEEN UPDATED TO FIX THE “LEVITATING RUNNER” ISSUE. 1/7/2025 UPDATE: 11/24/2024: The parts with wall thicknesses that are too thin to print at 100% scale without weird gaps have been updated. The model…
***NEW NOTE: Hey everyone, please stop reporting to me that someone is selling prints of this design. See the licensing at the bottom – commercial use is freely allowed. The original was by Happy Moon, who licensed it like that (and I do…
I really like 🥰 the PolyDryber boxes: The overall concept is great, the form factor is perfect, it has a cool design, …. but there are some design flaws that need to be fixed. 😉 But don't worry, you can do it! 😎 Remark: I designed the…
Very nice piece of art in smooth and low poly style. Place it to your living space or in your office as eye catcher. Also a nice present for valentine or birthday. Take a look to my models, there you can find a lot of other low poly…
For more flex I made 3 hollow versions of the octopus. - This also results in a shorter printtime than the original. Thanks to @DiabaseEngineer for the design.
Get in on the hype! Welcome to the gear ball! A fun mind blowing fidget toy you've probably seen on social media, but had no clue how it works! Well, rest assured, with these profiles you can make your own free spinning version! The best…
Źródło oznaczyło ten model jako treść 18+.
No Supports … Just Print … How about buy me a coffee buymeacoffee.com/spank7
I wanted a more idealized version of the classic "Easter Bunny - 3D Scan" so I smoothed it out a bit and flattened the bottom using MeshMixer. Thanks to @ openscan for the original model. The photos are of the bunny printed at double size…
Update: 3-20-2025: Updated the Crotch part to potentially be easier to print. The Crotch part has been difficult for many of you to print so I have re-oriented it and added some break-away supports into the model as well as converted some…
I have found some hard edges that were supposed to be smooth V1.1 addresses most of that. If I find time, I will try to fix the air intake holes, there are many broken triangles hiding inside I have it printed! Scaling it to 1000% was a…
Used a (slightly inaccurate but cooler-looking) Unitology font to inscribe the Marker from Dead Space. I've seen various paid models on other sites that use the inferior game rip version of the marker and are full of holes in the mesh.…
These are some armor pieces I made for the Dummy 13 figure by Soozaphone. I saw there were a few female armor piece remixes and I was not satisfied with how Dummy Thicc they made the figure look, also the embellishments felt like they…
🐟✨ XL Flexi Stingray – Special Edition A large, extra-smooth articulated stingray designed as a special XL version for maximum visual impact and fluid movement. Thanks to its increased size, the body and tail flex even more naturally,…
Here is the next Design from my "Open Drawer" Series. It is a full lenght drawer guide, that does not need any bearings! This Drawer Guide (in Germany its called Vollauszug btw.) uses the smooth surface of the PLA to run smoothly, so you…
Eliminate the sloppy fit between your filament spools and the spool holder that came with your Creality printer. This poor fit causes eccentric rolling of your spools while printing which can lead to non-uniform extrusion as the extruder…
The original version was too angular, so I made it smoother and removed a few flaws.
This is a remix of the wavy stand with smoother edges.
I did not like the available edgy cat design, so I made my own, which is much smoother. Additionally, I made the upper tail section steeper, to remove the overhang. Under the model files you will find a version with a brim model. This…
Ring holder hand If you like it, press like it! ;-) The original one has some ugly faces, so i smoothed the model. After that i made a low poly remix. Just mirror it in your slicer if you want the other hand. Would be happy to see your…
Useful tools for smoothing sealing lines and caulking lines, which helps save sealant without masking tape when you apply it for sealing work. They are suitable for most types of sealant such as DIY crafts or floor silicone sealant,…
Arduino powered infinitely rotatable and clickable dial that can play/pause your current song or skip to next one on double click. Read the tutorial:…
THX @qgepbiz for the original, which inspired me for this remix Minimalistic Xbox Controller Stand von agepbiz | Kostenloses STL-Modell herunterladen | Printables.com Simple and clean looking Xbox Controller Stand fits 8x3mm anti slip…
The original file was too low poly to make the slicer give nice perimeters so I recreated it in Blender to make it smoother.
This model is compatible with the lego system.
Heyho For a small project I did need some minimalistic brackets! Since I didn't particularly like most of the versions already available online, I quickly constructed a few myself and ended up installing this ones. After that Project I…
I printed a bunch of smooth animals (owl, moose, lamb, fox) for a themed cake and wanted a racoon. I like the racoon at www.thingiverse.com/thing:45471/ but couldn't just reduce the details using my slicers or 3d Builder so I loaded it up…
I was looking for a model of the female pelvis and sacrum, per a request from a friend of mine who is a doula. The base model was great, anatomically speaking, but the low-res poly look wasn't exactly what I was looking for, so I did some…
Smooth Devil Horns Hey maker! 👋 Small devil horns with a smooth surface, perfect for costumes, cosplay, or decorations. Features: Scale the horns to your desired size. Smooth design for a clean finish. Small and lightweight – easy to…
A much needed tilt lock for the: Phone Holder, smooth tilt adjustment, prints in place by E. Soderberg Here's a simple addition to the phone holder that allows you to lock it. Just slide it on when you need it. When you're done, switch it…
Arduino powered infinitely rotatable and clickable dial that can play/pause your current song or skip to next one on double click. ¨ Read the tutorial:…
After posting my original Winnie the Pooh with 'fur' a number of people requested a 'smooth' version. I've included all the parts for the full build under this remake for simplicity. All of my build notes (colors, print and assembly…
This new version has much smoother surfaces when 3D printing since it uses Quad Meshes. I've also tweaked each letter shape while converting them so that they don't have any strange divots or creases.
I printed the model from Luckystrykx and have to say I didn't like the feel with the gap on the side. It had sharp edges, so I used Meshmixer to smooth it out. I recommend printing it at 97% in PLA because it does not shrink as much as…
Printing instructions for Voronoi: I recommend a 5mm Outer brim if you don't want surprises from the bottom of your heart. Make sure you're using dry filament if you have excessive stringing. Low Poly: Easiest make and scalability. You…
Firt of all Check out the github repository https://github.com/Radiotbo3d/SBFI What is this? These are replacement front idlers for Vorons (and Voron-based machines). This design is available for Voron Trident and Voron 2.4. Improvements?…
This is a set of feet, and two sets of toes that i modeled for my own custom Dummy 13 "Zendwarth". I noticed that there weren't many feet models for Dummy 13's. I originally set out to make articulated toes to match the hands, but it…
Fits standard US 1 Gallon Milk Jugs. Or it at least fits the gallon jug (iced tea) I had around when i made this. It's a 38 mm cap Grip version and smooth version It doesn't leak from the seal or threads when held upside down. Print…
This is the STL file for flow test of filament. You can define what flow rate you need to test in each 10mm to get the optimal flow rate for you printer and your filament. I added the CAD file in case you need to modify the model. You can…
For a long while i have wanted a smooth curved-shaped, modern aproach to the cryptex mechanism. Since I didn't find it I had to make it, so took in reference the good work of the mechanism from other people, and made a visual remix. Hope…
I tailored this model to my liking. You don't have to like it, but you can have it if you do. I reshaped the vent slots to reduce unsupported bridging width. Added radii virtually everywhere to smooth the entire look out. Removed…
40' Smooth Sided Intermodal Well Cars used for transporting shipping containers across the United States. Parts can be printed using resin or FDM. The files contain sets for either a 1, 3, or 5 car string. Cars are already sliced to…
This model provides ArUco calibration tags for BambuLab printers matching both the Bambu High Temprature PEI plate for use with any smooth PEI sheet and the Bambu Dual-Sided Textured PEI plate for use with any textured PEI sheet. Since…
This model is compatible with the lego system.
I used blender and Prusa's simplify algorithm to make Scott McDonalds's awesome Cursed Pirate Coin a bit smoother, see picture for comparison. For FDM printing I recommend orienting it vertically and enabling tree / organic supports (~20%…
This is an set of profiling tools for forming a smooth surface on silicone sealant. pls comment if you need other sizes.
The original version was genius, but had too sharp of edges for me so I added fillets to smooth them out.
This is a remix of the excellent cable chain for the Sovol SV06 made by rogerquin ( https://www.printables.com/model/447467-cable-chain-spine-for-sovol-sv06-3d-printer-extrud ). To make the chain flex smoothly, I used blender to scale…
This is a print-in-place 608 bearing with 8x 5mm ball-rollers separated with distancers. I made it using ±0.1mm tolerances, as all the other models that I found either were too wobbly due to higher tolerances, or were difficult and…
While I appreciate the fact that most of this model was scanned in, it was a little rough for my tastes. I just smoothed out the handles.
I printed this model but found the two bottom supports the phone actually rests on were too far apart for iPhones. So, I slightly modified these supports to better hold iPhones. Please see additional print info. in the included PDF Please…
I explored many of the other designs out there and generally wasn't satisfied with what I found for my application. I wanted something that brought the filament purge waste closer to the front of the printer, while minimizing the side…
This model is compatible with the lego system.
F-14 Tomcat US Navy Fighter Jet (Made Horizontal For Less Support And Smooth Print)
This is a remix of https://www.printables.com/model/176417-phone-holder-smooth-tilt-adjustment-prints-in-plac I solved the problem of it not staying in place by adding a locking mechanism. You pull the adjustment knob out to adjust it and…
Cute Teddy Bear for decoration or to test out the Fuzzy Skin feature. Fuzzy skin g-code included!
ULTRA-SMOOTH RUNNING SPOOL HOLDERS Notice: not my work (scroll down) I tried LOTS of spool holders here, but most of them either required screws, bearings or whatever. Most of them were also quite noisy so I found this one on Thingiverese…
Two Versions: Normal, round screw Flat, 2 sides are flat making it easier to hold No support needed, just print and play with them, If its not smooth at first, run it under some water until it spins freely.
I've adapted the smooth forearms of the eva figure to the vanilla one, also removed the blade on the back. It prints easily and looks a little more organic than the original one.
Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop Single-layer walls allow max light through. No supports needed. Easy to print. Fits any LED strip lighting. I developed this to hold most of a 5m strip of LEDs, cut off or tuck…
Good morning, Welcome to my profile, full of models and miniatures :-) I have something for you today on Airsoft. Silencers of various variants. From 50-200mm length. On one side it is equipped with a M14x1 left-hand thread (CCW).…
The world doesn't need more boring 3D printed headset spacers, so I made some slightly less boring ones. I also made some very boring headset spacers. These are for standard 1 1/8" headtubes, but I've included the F3D and STEP files so…
The Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2 by Sneaks is a great way to mount a camera to or near your printer, but I had trouble remembering which side of each link that I could tighten or loosen in order to adjust…
Wanted to use this model, but it needed a little fixing to make it print right. Print 2, it's symmetric. No supports required.
This Marker is a hollowed and colored version of @Aeviternal_233277 Marker . I hollowed it with Meshmixer and painted it in Prusaslicer for a Prusa XL as I wanted to use it as a Lamp. The walls are a bit thin on certain spots and can…
I'm playing around with vapor smoothing with acetone, and i'm trying to come up with a method that's reasonably safe but also effective. ( Maybe if I figure it out i'll make a different post… :) ) To do this, I need some good practice…
Great additional 3x2 Slope compatible to Hubelino® a Marble run for Lego® Duplo®. Its for marbles around Ø25mm. The 3x2 slope is a good addition to the 2x2 and 4x2 slope from Hubelino. Did some optimization for better printing, like…
I recently made a standard bottle cap container and I had some smoothie bottles, so I wanted to make a bigger bottle cap container for those. There are standards for various bottle caps, and all 3 smoothie brands I tried follow the…
This is remixed from Prusa Bear 2020 spool holder which was remixed from another holder (we are all just using the amazing holder). This is honestly the smoothest rolling spool holder I've made and tried. I've included the step file for…
I used ajmckay’s model as a guide for general shape, rounded all corners and added holes for aesthetic effect and material reduction. This design is meant to be printed with supports, laying down. Uses around 40g of filament with 30%…
The last pieces I need to smooth out my whole model was to round out were the shoulders and biceps. The biceps pieces from Smooth were good, but it needed better shoulders. I had to tighten them up, and make them smaller and more fitting.…
WDT (Weiss Distribution Technique) is a method of espresso preparation to evenly distribute coffee grounds in a portafilter to ensure a more even extraction of coffee from the espresso machine. This tool uses several needles spinning in a…
3D Printed Silicone Caulking Nozzle with Integrated Smoother This nozzle streamlines silicone application, combining dispensing and smoothing into one efficient tool. Designed to fit standard caulking guns. Key Features: 2-in-1…
I made this from scratch to be compatible with the RostaP Multifunction Arm System. I wanted a stronger desk clamp and the ability to freely swivel the base without the teeth getting in the way. I also eliminated the need for one of the…
removed the tip it incase it causes yarn to catch while knitting
Small fix preventing ATH-M50X from overextending when small nob is broken normally preventing this. This should be printed in the direction the STLs have to not need support. There is no tolerance between parts to ensure they hold…
This model is compatible with the lego system.
Settings for Bambu Studio or Orca Slicer. Print with Bambu AMS and the ability to access different filaments. Sample on one example object with Generic PLA and Generic PETG Print without Prime Tower for save Filament! All settings see…
