Liczymy pasujące modele…
I decided to have some fun with the Soap Dish challenge, and design something that hit both the form and function while being incredibly easy to print - and I like how it turned out enough that I'm going to use this in my own home! I…
Wydruk około 2,08 €–2,55 € nettoWstępna wycena jednego wariantu
A sturdy soap box which makes use of a fun curvy shape to create raised interior rails for the soap to sit on for quicker drying , and includes a strong built-in latch to help secure the case closed when you're ready to travel. Three…
Wydruk około 5,11 €–6,25 € nettoWstępna wycena jednego wariantu
This is used to keep the liquid cup with the soap dispenser and prevent dripping. Should fit the standard laundry detergent dispenser. I printed mine at a 50deg angle with the sharp point cut flat and use supports to make sure it doesnt…
Wydruk około 5,84 €–7,13 € nettoWstępna wycena jednego wariantu
Wanted to make unique Soap Dish but still wanted it to be practical! 25/5/22 Update: Uploaded Skeleton Shape'd plate for total makeover :) There are skulls & skeletons all over my house (not from any bad reason, just I like the shape and…
Wydruk około 4,68 €–5,72 € nettoWstępna wycena jednego wariantu
Hey ! This is a fun project I really wanted to share with you because I had lots of fun with it ! The concept As you can see, the concept is simple, it is juste a tiny 3d printed glider with the wings made out of "soap bubble liquid"!…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
There are two parts: boat_dish_body.stl and boat_dish_deck.stl. Each part prints easily and without the need for supports. The deck, which can be removed for cleaning, fits perfectly into the body of the boat. The boat can hold large bars…
Wydruk około 1,37 €–1,67 € nettoWstępna wycena jednego wariantu
Soap dish inspired by fishbone. Thanks to the fish ribs, the soap does not lie in the water. Easy to print. No supports needed. The dimensions are: 180 x 80 mm (100 %) - fits for classic soap 150 x 60 mm (75 %) - fits for smaller soap
Wydruk około 2,54 €–3,10 € nettoWstępna wycena jednego wariantu
Revision Notes 8/23/2026 - I added a Small-to-Large connector cap after a few people requested it. There are three kinds of connector in this set. I have found the smaller connector fits many types of hand soap, dish soap and lotion. The…
Wydruk około 2,36 €–2,89 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This 3D model is a luxurious soap bar holder designed to resemble the front of an ancient Greek temple. It blends classical elegance with practical function, making it ideal as a decorative yet usable bath accessory or novelty gift item.…
Wydruk około 5,63 €–6,88 € nettoWstępna wycena jednego wariantu
Print the two parts and voilà! If you’d like to support my work, leaving a ♡ like ♥ or even buying me a coffee ☕ goes a long way. I love creating and sharing my designs, but my Mk2.5s is getting old, and every bit of support helps.
Wydruk około 1,72 €–2,10 € nettoWstępna wycena jednego wariantu
This is a pretty basic print of a soap saver based on the Wooden one available from Dr. Squatch. It helps to dry out your bar of soap and extend the life which is very noticeable. After using the soap saver I get 3-4 weeks out of a bar of…
Wydruk około 3,90 €–4,77 € nettoWstępna wycena jednego wariantu
Soaker hose spike to keep my soaker hoses in place. Designed a barb at the bottom to help keep in place. Printed using draft mode for .3mm layers(thicker layers are more durable), three perimeters, high end of PETG range for strength.
Wydruk około 6,42 €–7,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A Plain Soap Mold designed for the home soap maker to mold a bar of soap. The mold can be easily 3D printed, without any support, on a modern inexpensive 3D Printer. It can be printed with a variety of heat tolerant materials, including…
Wydruk około 4,80 €–5,87 € nettoWstępna wycena jednego wariantu
Living in a college dorm, I found myself unable to cary a bar of soap back and forth to the bathroom without making a huge mess. And yes, I know I could buy a soap container for relatively cheap, but I'm an engineering major with a 3D…
Wydruk około 3,88 €–4,74 € nettoWstępna wycena jednego wariantu
This is my design of dish that is ventilated from below. Objects placed in this dish dry fast, as there is an air flow possible from all sides. How to Print the Dish Print the dish with the flat bottom on the print bed. In order to get…
Wydruk około 2,16 €–2,64 € nettoWstępna wycena jednego wariantu
Update January 15, 2024: As suggested by @JamaicanLumb_1661773 , it's a great idea to attach self-adhesive rubber bumper pads to the bottom of the Soap Corner Tray (or any other flat-bottomed object that you print) if you want to help…
Wydruk około 4,77 €–5,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Mesoamerican Mask. Large file : Very Detailed and wanted to keep the details as much as possible. As soon as I decimated it, no matter how small, the details just washed out.
Wydruk około 15,70 €–19,18 € nettoWstępna wycena jednego wariantu
Holder and Dispenser for Dishwasher Soap
Wydruk około 13,49 €–16,48 € nettoWstępna wycena jednego wariantu
A Halloween skull soap dispenser. Original idea is by one of my daughters, when we discussed what could be printed for Halloween… New 22.10.2023: Added the “Sagrotan Version”. Big thanks to nilson_fx for modelling the Sagrotan soap…
Wydruk około 3,22 €–3,93 € nettoWstępna wycena jednego wariantu
Since my GF wanted to have 2 soaps with her I edited the original model via Prusa Slicer and made the lid bigger. Important is to print it with at least 0.15 layer height, otherwise the thread will not work.
Wydruk około 0,46 €–0,57 € nettoWstępna wycena jednego wariantu
A soap dish shaped like a miniature frying pan. Prints in two parts for ease of both printing and cleaning: the base dish, and the drainage grill lines + handle. The latter slots in easily to rest in the dish. The filament shown in the…
Wydruk około 2,07 €–2,53 € nettoWstępna wycena jednego wariantu
This soap dish brings a touch of charm to any bathroom with its heart-shaped border and decorative circular pattern on the base, designed to keep soap dry. You can also use it to store cotton pads or other items that need to stay dry. The…
Wydruk około 1,84 €–2,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Easy soap holder for your kitchen or bathroom, with small water outlet. You can modify everything in attached fusion document. If you remix it and post it, please let me know. If you have any questions contact me on ig: meller_filip
Wydruk około 4,09 €–5,00 € nettoWstępna wycena jednego wariantu
Bar Soap Holder This holder is designed to hold bar soap while promoting drainage and quick drying which helps bar soap last a lot longer compared to when it stays wet for a long period of time. If you're like me you've tried dozens of…
Wydruk około 10,93 €–13,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Showerproof Soap Case easy to use in the shower to protect the soaps of splash water print-in-place hinged lid, easy to print and no support materials removeable and smooth case bottom for easy cleaning and consume sticky leftovers angled…
Wydruk około 6,82 €–8,33 € nettoWstępna wycena jednego wariantu
This small soap dish has a squiggle border around a decorative hearts pattern on the bottom to keep the soap dry. You can also use it for cotton pads or similar objects which need to dry somewhere. It is not my favorite, I like LR2166…
Wydruk około 2,36 €–2,89 € nettoWstępna wycena jednego wariantu
Contest Soap Dishes resultet in many different models of soap dishes, but ... Do I want to spend more than 7 hours to print single soap dish? Not really. I want something simple, nice looking and quick to print. For this reason there is…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
in french below I designed this Fusion 360 soap dish to fit a 20mm diameter shower rod. I printed it in PLA with a 0.4mm nozzle. It can also be printed in PETG with a 0.6mm nozzle for more strength. What do you think ? The assembly is…
Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu
the "leaf_soap_dish_VF.stl" has holes to drain the soap as shown in the picture : the “leaf_soap_dish_with_ground_VF.stl” has a ground to not have contact between water and the surface but allows the draining of the soap :
Wydruk około 0,85 €–1,04 € nettoWstępna wycena jednego wariantu
Soap Mold : Hitchhiker's Guide to the Galaxy Feel Free to delete the positive projection. USE TPU.. The mold needs to be flexible. (Gcode is set ot pla) so slice it yourself.
Wydruk około 1,50 €–1,83 € nettoWstępna wycena jednego wariantu
This is a very long print (+10 h), but the result is worth it! you can print the tower top in red and the castle in white or grey for a very classic look. The door has a snap in place mechanism, it was made for opening/closing and…
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
Soap Tray (in two sizes) for shower shelf is intended to be placed on a shelf of your shower. Drains liquid back into the shower to keep soap dry between uses. The provided STL files are intended to be printed in TPU (FLEX) or PETG and…
Wydruk około 2,98 €–3,65 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Holder for soap which draining the water instantly. Also work with IKEA's previous Stugvik suction hooks.
Wydruk około 1,68 €–2,05 € nettoWstępna wycena jednego wariantu
Here you’ll find a simple, yet practical and aesthetically pleasing soap dish. The soap dish consists of two parts, making it easy to print and clean. If you tend to forget to pour out the water, you can add a small drainage hole on the…
Wydruk około 2,27 €–2,78 € nettoWstępna wycena jednego wariantu
I created this Soap Tray in decorative style. It's easy to print model made for FDM printing with basic PLA. All colored plastic pieces are divided so you don't need to use multi-material print (check notes under FILES category). You can…
Wydruk około 0,57 €–0,70 € nettoWstępna wycena jednego wariantu
We wanted to have a small organizer for the kitchen. None of the models really fit our needs, however, we got partly inspired by another model (https://www.printables.com/cs/model/569365-sink-organizer). This model has 3 compartments.…
Wydruk około 4,01 €–4,91 € nettoWstępna wycena jednego wariantu
While refilling the SimpleHuman soap dispener, the lid slipped through my fingers, fell to the ground and shattered to pieces… Question: Should I buy a replacement part or design my own lid? After reseaching the price for an original lid…
Wydruk około 2,04 €–2,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Are you tired of boring store-bought soap dispensers? This 3D printable cover transforms your soap bottle into a stylish bathroom accessory! Here's why you'll love it: Easy & Sustainable: Forget printing a whole bottle! This cover prints…
Wydruk około 1,52 €–1,85 € nettoWstępna wycena jednego wariantu
Since the corona virus outbreak I have placed soap dishes at every sink in our household. But why yet another soap dish design? This one is modeled 100% PrusaSlicer. Both posing as a showcase for what can be done with all of its great…
Wydruk około 2,19 €–2,68 € nettoWstępna wycena jednego wariantu
It prints well at the default Prusa .30mm Draft setting. The one in the photos is printed without supports or brim. You may need a brim due to the small contact area on the print bed. You may also want supports on the print bed for a…
Wydruk około 3,01 €–3,68 € nettoWstępna wycena jednego wariantu
Printed on an ELEGOO Saturn 2 8k resin printer, with ELEGOO standard green resin in Lychee Slicer to get that translucent green effect, possible to do on an FDM printer I just didn't have any green filament around. 4" (10.16cm) Diameter…
Wydruk około 2,75 €–3,36 € nettoWstępna wycena jednego wariantu
V případě, že se Vám výtisk povede, prosím přidejte fotografii. DĚKUJI If the printout is successful for you, please add a photo. THANK YOU Držák na stěnu pro automatický dávkovač mýdla od Xiaomi.…
Wydruk około 2,44 €–2,98 € nettoWstępna wycena jednego wariantu
Print in vase mode, preferably with a translucent filament. The minimal surface connecting the edges of a cube has three stable states. Each has a square in the middle, but the square can be perpendicular to the X,Y, or Z-axis. The…
Wydruk około 0,74 €–0,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Deer of Our Existence statue based on the Calendar figures from Códice Vaticano B : I have a split version that gets printed on two plates but the Prusa site is getting stuck downloading them. So for now download and import the 3mf…
Wydruk około 7,34 €–8,97 € nettoWstępna wycena jednego wariantu
Simple shampoo holder with clip for hansgrohe mixer Soap holder with cute seashell lid preventing water from melting the soap They are fixed using clips on the water inlet pipes. A slope drains water towards the holes. Designed for…
Wydruk około 1,57 €–1,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I recommend printing the main hull L&R as well as the front fin and stand first. then assemble the 2 main hull parts, then add the front fin. After that place the assemble section on the stand for easier assembly of the other pieces. I…
Wydruk około 9,99 €–12,21 € nettoWstępna wycena jednego wariantu
Dieser Seifenhalter ist ideal für Seifenstücke, die bis zu 10 cm in der Länge und 6 cm in der Breite messen. Durch die passenden Maße wird sichergestellt, dass die Seife sicher und ordentlich aufbewahrt werden kann, ohne zu viel Platz…
Wydruk około 1,42 €–1,73 € nettoWstępna wycena jednego wariantu
Porta sapone da viaggio. Soap Holder
Wydruk około 3,39 €–4,15 € nettoWstępna wycena jednego wariantu
I created two decorative versions of the soap holder elliptical and circular versions
Wydruk około 10,66 €–13,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Looks nice and is easy to print in your favorit color... Print upright using small layer hight, brim and tree supports as shown on one of my pics. Hope you enjoy.
Wydruk około 4,05 €–4,95 € nettoWstępna wycena jednego wariantu
I was annoyed by soap dispensers giving me about 10000x more soap than what any reasonable person needs to wash their hands, so I decided to limit the pump travel distance. Snap multiple restriction rings onto the soap dispenser pump (see…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
See this post : My next approach to handling the soap bar problem: a floating soap dish with a perforated bottom so drying and draining from below can happen. My journey so far: 1. standard soap dish. It's a slurry mess. 2. fancy soap…
Wydruk około 2,37 €–2,89 € nettoWstępna wycena jednego wariantu
Dish Soap Holders This dish soap holder is designed to hold bottles of dish soap such as Dawn while promoting drainage. This design is also useful for things like mouthwash at bathroom sinks. This helps prevent the dirty build-up that…
Wydruk około 23,91 €–29,22 € nettoWstępna wycena jednego wariantu
This is a cover for the IKEA EKOLN soap dispenser that is simply put together. I printed the parts on my MK4S using MMU3. All parts PLA 40% lightning infill
Wydruk około 19,45 €–23,78 € nettoWstępna wycena jednego wariantu
It always bothered me that I couldn't get the last bit of soap out of Method hand soap dispensers apart from rinsing out the bottle and washing it all down the drain - this seemed wasteful and unnecessary. Using this coupling, I can now…
Wydruk około 1,03 €–1,25 € nettoWstępna wycena jednego wariantu
Silvercrest Electric Soap Dispenser Holder with Removable Soap Drip Catcher. No supports needed. Silvercrest, soporte para dispensador eléctrico con vaso extraíble para recoger jabón sobrante. No necesita soportes, fácil impresión.
Wydruk około 2,70 €–3,29 € nettoWstępna wycena jednego wariantu
Mesoamerican Pipe
Wydruk około 8,05 €–9,83 € nettoWstępna wycena jednego wariantu
I recommend to set Printing layers to 0,15mm because of the thread. No supports needed. to close the container use plastic bottle cup typically from a cola or a water. Assembly: Make a hole in a top of Detol container and glue the seal to…
Wydruk około 0,62 €–0,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This compact oval organizer is designed to keep your sink area neat while maximizing space efficiency. The layout combines two functional sections in one seamless footprint. Cylindrical compartment — 70 mm inner diameter, perfect for…
Wydruk około 6,44 €–7,87 € nettoWstępna wycena jednego wariantu
Toothbrush and Soap Holder for dental splint
Wydruk około 1,38 €–1,69 € nettoWstępna wycena jednego wariantu
This is a Soapholder i designed for the shower to hold my solid shampoo. I printed it on my ender 3 v2 with 0.2mm Layer Height with a 0.4mm Nozzle. I used support structure to print the holding clamps. The holder is made of PLA because of…
Wydruk około 1,69 €–2,07 € nettoWstępna wycena jednego wariantu
Sponge/soap holder with hexagon motive for dripping excess water from the sponge/sponge.
Wydruk około 0,73 €–0,90 € nettoWstępna wycena jednego wariantu
better 0.2 mm speed
Wydruk około 2,50 €–3,05 € nettoWstępna wycena jednego wariantu
This model should fit glass panes up to 10mm in thickness. The soapbar should not exceed the dimensions of 90mm x 79mm
Wydruk około 2,43 €–2,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a minimalist, space-saving soap dish designed for a neat, "zero-footprint" bathroom setup. Instead of taking up valuable counter space, it hangs discreetly on the neck of a wall-mounted faucet, allowing any excess water to drip…
Wydruk około 9,27 €–11,33 € nettoWstępna wycena jednego wariantu
Print instructions: layer height: 0.2 mm infill (recommended): 10% supports: none You can use brim, but from my experience it is not necessary. Make sure you have well tuned retraction to avoid the stringy mess ;) The holder should fit a…
Wydruk około 10,76 €–13,15 € nettoWstępna wycena jednego wariantu
A small Mrs. Myers soap holder with a 45mm connection to go around the built in soap in my sink.
Wydruk około 0,85 €–1,04 € nettoWstępna wycena jednego wariantu
made quick this Soapholder
Wydruk około 3,27 €–4,00 € nettoWstępna wycena jednego wariantu
this soap holder can be held up with shower tape or you can easily drill thou it.
Wydruk około 3,06 €–3,74 € nettoWstępna wycena jednego wariantu
(English below) Das Etui fasst ein kleines Stück Seife, maximal ca. 70 mm lang, 40 mm breit und 20 mm hoch. Gedacht, um auf Reisen Platz im Kulturbeutel zu sparen. Die dicke Flasche mit dem Duschgel kann endlich zu Hause bleiben. Das Etui…
Wydruk około 1,27 €–1,55 € nettoWstępna wycena jednego wariantu
The width is 110mm, although the printed version in the photo has been scaled in the slicer to 120mm. Thanks to the gentle slope, all remaining water flows easily into the sink. Any material, but the smaller the layer height, the better…
Bring a touch of nature into your space with the Monstera Leaf Soap Dish, a perfect blend of organic beauty and functionality. Inspired by the lush monstera plant, this soap dish features elegant curves and signature cutouts that allow…
Watery counters are a problem of your past! This super handy soap dish is a stylish addition to any sink or shower. It will also leave your counters, and your bar soap, bone-dry and ready to use. Leave it on the lip of your sink to allow…
Soap bar holder that drains on its own
I really like the original design and a idea for water drain from user @species_249250 . But the nasty overhang on the bottom of his model, I just couldn't print that one to be happy with the result. So I logged into my trusty Onshape and…
If you want to support me or get commercial licenses , you can join my Patreon membership starting from just $2 per month: https://www.patreon.com/UniversalMaker3D Here is a fitting corner shoap/shampoo dish design for your shower (or…
Simple and functional. Meant to be printed vertically. Mine is printed at 0.3 Layer Height in PLA. Here are other similar designs to explore: And if you’d like to support my work, leaving a ♡ like ♥ or even buying me a coffee ☕ goes a…
Porta saponetta in PETG - Soap holder PETG
Une boite a savon de voyage, facile a imprimer sans support. Réalisé en PLA, mais possible d'utiliser du PETG ou autre, avec une buse de 0,6 mm, couche de 0,2 mm. 1h50 environ. Travel soap box, print in place. No support. PLA or PETG Buse…
A Soapdish tray for the kitchen or bathroom. Self-draining, large enough to hold soap bottle & sponge. Small version to hold a sponge or soap bar. Filename: 1 x Kitchen_Bath_Soap_Tray_Large_v1.stl Large enough to hold soap bottle & sponge…
What can I say? Its a soap dish shaped like a duck! Or, a duck shaped like a soap dish? There are two versions of this soap dish: -One with feet, appearing to be standing -One without feet, appearing to be resting on its belly Thanks to…
This beautiful and robust soap dish for your shower already comes with two fancy insets to choose from and even allows you to design your own individual inset. You can download variants for shower rails with a diameter of 18, 20, 22 and…
A soap/sponge tray which allow for airflow and fast drying.
I liked the original design but found three issues. First the holder is too shallow for bigger soaps. Second the filler just sits freely and is easily flipped when I pick up the soap. Third the flat bottom is too slippery on flat wet…
So another rather minimal soap / sponge holder… I needed one with a specific and rather larger size of the underneath drawer to hold a soap savior (a special request from my family). Bottom drawer size: H 10 x W 85 x L 130 mm Two version:…
Very sturdy, carries soap or multiple shampoo bottles. Fits 18, 20, 22, 25 and 28 mm shower rails. Easy to print and easy to mount. Update 2023-01-03: I have added a variant for shower rails with a diameter of 28 millimeters. Update…
Prichádza čas dovolenky, takže vytvorme atmosféru odpočinku a relaxácie In the 3mf part of the hammock, set the number of upper and lower layers to 0 and the value of the infill to 8-10%, the shape of a straight line and 3 perimeters…
This is my Travel Soap Box. This has been tried and tested on many of my travels by both myself and my son. The pictures are of my actual well travelled Soap Box, over 2 years old now. The box holds a full normal size bar of soap, the…
Very sturdy, carries soap or multiple shampoo bottles. Unlike my other designs, this dish is fixed on the back. Fits 18, 20, 22 and 25mm shower rails. Versions for left and right mounting available. Easy to print and easy to mount. Update…
Yet another soap dish. Features an inclined bottom to make any excess water flow out. Printing Material: Doesn't really matter. Go with what you like. Support: None. The updated shell does not require any support. The original shell (not…
Keep your counter clean with this tray, designed to move excess water towards the spout into your sink.
This chill little capybara fits perfectly into the dinosaur swim ring – just slide it in, no glue or fuss needed. It makes for a fun and summery decoration, whether on your desk, windowsill, or shelf. My Print Settings (included in 3MF…
Another soap dish. Inspired by Chinise one. Let soap be always dry and avoid proliferation or bacteria.
Update 07/06/2026 FreeCAD redesign is done! Testing is on its way. There will be many new parameters for more control; the model will be more resilient to changes; more sizes will be available; A new derivative design will exist (one that…
The Dish and Topdish are designed to fit together. Dish2 and Topdish2 hold a full size soap bar. Dish1 and Topdish1 is just a smaller version of the same design. Dish1 may not fit all soap bars, but most soap designs would probably work.…
This is a stylish, modern looking soap dish in two parts. Each part can used separately as their own dish, or they can be used together. The upper grated dish lets the soap dry on all sides, and the lower solid dish collects moisture that…
I designed and 3D printed this minimalist soap dish to solve a common problem — soggy soap! It features a built-in drain channel that allows water to run off easily, keeping your soap dry and lasting longer. The open design promotes…
Japanese inspired self draining soap dish. Minimum surface area keeps your soap fresh and dry. My original design was first published here: https://www.thingiverse.com/thing:2756347 and has 60k downloads with many makes and remakes. Easy…
![Skeleton hand [Soap Dish]](https://media.printables.com/media/prints/212754/images/1950793_1a9ddb8f-4871-478a-8909-f159df1491ff/skeleton_hand_soap_dish_1.png)
