1355 modeli
REPRACK 2 IS HERE!! NOTE: We now have a CLUBS page for exclusive RepRack upgrades like our Parametric Modular Shelving, RepRack XL as well as other cool stuff. PLEASE consider joining to support more development of this handy storage…
Wydruk około 1,55 €–1,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update: V2 is much smaller! V1, named ‘Bigfoot’ by those commenting here, had the majority of its development dedicated to troubleshooting code, with the CAD being a first attempt. V2, which I'm calling ‘Mini-ish’, inverts the joysticks…
Wydruk około 9,97 €–12,19 € nettoWstępna wycena jednego wariantu
This design was inspired in 2 other designs in this site: https://www.thingiverse.com/thing:2339441 https://www.thingiverse.com/thing:2668159 Since I could not find for the original file to adapt it to my battery with protection circuit…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
Optional upgrade for your RepRack or RepBox storage systems. Add a flange rollers to your slip rod setup for enhanced rolling as needed. Print directly from your RepRack or use in a standalone configuration. Snap fits cleanly over slip…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Threads for a standard mason jar lid, built in Fusion 360, fully parametrized, for use in other designs. I couldn't find a fusion360 source file to use in other designs, so i built this to share. It's largely based on the thread pitch in…
Wydruk około 0,76 €–0,92 € nettoWstępna wycena jednego wariantu
Source dragon of motion icon from Dragons Rising Season 2. Not intended to be used as a weapon. Blade should be printed in translucent red PETG with at least 3 walls and zero infill for best results. Please post a make if you make any of…
Wydruk około 6,82 €–8,33 € nettoWstępna wycena jednego wariantu
Custom-made upgrades for the components for the board game Anno 1800. I sprayed them with some metallic-like coatings to get a nicer sheen on them. For the gold ones tokens I included both an embossed and a debossed version, but I…
Wydruk około 0,87 €–1,07 € nettoWstępna wycena jednego wariantu
I wanted rollers where the bearings were a bit wider apart as I had a spool pull off when they're closer together, also doubled them up for spools next to each other on the RepRack to feed the Palette. I used 8x20mm metal pins (Amazon aff…
Wydruk około 3,63 €–4,43 € nettoWstępna wycena jednego wariantu
Replace the non-functional shelf caps with this 3D printed tight fitting one. This is for the Project Source shelves. These shelves come with a clear plastic cap, but they do not stay in place. Remove them and replace with this cap which…
Wydruk około 0,33 €–0,40 € nettoWstępna wycena jednego wariantu
Easily add a fire alarm to your enclosure using the extra nuts and bolts included in the kit. We've made multiple grates for the fire alarm, so choose whichever you prefer. The link to the compatible fire alarm can be found here
Wydruk około 5,37 €–6,56 € nettoWstępna wycena jednego wariantu
The spawn point location indicator for the Source engine's map editor, Hammer. A little low-poly Gordon Freeman. Credit to one of my friends for editing this to be easier to 3D print.
Wydruk około 0,98 €–1,20 € nettoWstępna wycena jednego wariantu
There are several great designs for cardholders or resource trays. Most of the time those are rather 'bulky'. With this design, I tried to come from a different angle. I created the trays in such a way that during storage/transport, they…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
Introduction Just as Calistar , Calitower Z is a free, open source, and parametric tool used to adjust a 3D printer's dimensional accuracy. While Calistar calibrates the x- and y-axis, Calitower Z sets out to do exactly that, just for the…
Wydruk około 1,40 €–1,71 € nettoWstępna wycena jednego wariantu
GoPro mount for TBS Source One V5 5inch. Updated & tested! Good for PLA
Wydruk około 0,33 €–0,40 € nettoWstępna wycena jednego wariantu
Very simple and easy to print magnetic screw tray with 9 integrated magnets. Magnets are snuggly press-fitted, so glue is not necessary. There is also an optional 1 layer thick sheet, that can be used as a cover for the magnets. It also…
Wydruk około 1,05 €–1,28 € nettoWstępna wycena jednego wariantu
The 3D Sourcerer Palette 2/Palette 2 Pro Base is designed to be easily printable without supports & with easy access to all ports. The 2 Base Support Bars are made to slot into Side Piece A and B so that the pieces will not separate from…
Wydruk około 7,41 €–9,06 € nettoWstępna wycena jednego wariantu
I made this to hold the cubes from Lords of Waterdeep, but I figure it can fit many more games (Pandemic for example). It is a container to keep the resources organized. 60mm in diameter; 30 mm in height; around 28 mm in depth. The gcode…
Wydruk około 0,95 €–1,16 € nettoWstępna wycena jednego wariantu
This model is a direct swap replacement for a vacuum molded tray from Puerto Rico 1897 Special Edition published by Alea and Awaken Realms. The stock tray is excellent and fit for purpose in storage. I prefer this on the table as it is…
Wydruk około 10,08 €–12,33 € nettoWstępna wycena jednego wariantu
V2 IS HERE: https://www.printables.com/model/1152427-openvessel-20-a-practical-3d-printing-benchmark Introducing OpenVessel , a model designed from scratch to embody the true spirit of 3D printing: freedom, openness, and community.…
2024-10-10 - Improvements to the web-based worksheet, including an improved measurement map, and Plot.ly graphics to help visualize your results. Check out the wiki on Github ! This companion to the spreadsheet calculator and browser…
Features of this Open Source car: Maximum 3D printed parts Easy to source hardware Simple Assembly Easy maintenance and battery access Dual wishbone suspension Open differential Low noise drive (using Blheli ESC) Printable with a 200mm…
I have a pedestal drill, but it is guarded by two fearsome miniature goats, and it's not suitable for every project. I wanted a way to use my hand drill accurately for quick jobs, by adding a way to ensure holes were straight/square, plus…
Open source tension meter for GT2 belts based on Prusa gcode This design is made based on their gcode file with eyeball measuring. Use at your own risk. STL, STEP , FreeCAD format are availabe for download. The lite version with small…
Update 2024.12.05. – I updated the source file for better results. I measured, designed and printed lots of Duplo bricks to bring you the ultimate, well-tested Duplo Brick Creator. I started out from a Fusion 360 design I found out in the…
These are detailed models of IKEA SKÅDIS / UPPSPEL pegboards in all standard sizes . They include the pegboard, the mounting bracket, screws, and standoffs. You can use these models in CAD assemblies to create renders, to showcase your…
This is a set of containers for the Everdell board game, specifically the complete collection from Kickstarter. The tray has room for all the tokens, and also includes space for each container! I decided to make my own, so basically I…
PROJECT PRESENTATION I share with you the source files allowing you to make a solid ball and socket connection to reuse in your designs. This version is the result of a long series of iterations to find the right design. This ball joint…
Hi guys, i just made a CAD File of the TBS Source One V5. Feel free to use it. Tip me a cofee if you want to: paypal.me/richi241
Overview Filament dryers have exit ports in less than ideal places. The filament often has to bend sharply to line up with the port, which is exaggerated depending on hoe much filamnt is left on the spool. This simple design prints in…
CLICK HERE FOR THE ASSEMBLY GUIDE Available for $119.99 CLICK HERE TO BUY DELACK AT 3D SOURCERER.COM CLICK HERE TO BUY DELACK ON OUR AMAZON STOREFRONT AVAILABLE IN THE USA ONLY! MMU3 COMPATIBLE
Overview This is a filament pelletizer which converts old or unwanted filament into short pellets. It aims to be safe, tidy and easy to use. My favourite feature is the self feeding mechanism that is geared from the power drill input. To…
Made counter for MTG tokens, resources and monster stats changes. with the option to make the dials double sided like +1/+1 and -1/-1 on the same dial to save printing a lot of dials I used mtg icons and Google material symbols for the…
Thank you for your interest in the Universal Enclosure Standard Build. All STLs for the Standard Build are below. We also have an additional set of Daisy-Chain and Accessory STLs available on our profile. To purchase the kit for this…
Adjusted the model so that the beam holding the letters together is not so visible
Open Source Vacuum Turbine Module (Fully Printable) This is a fully printable, open-source vacuum turbine set designed to be easily incorporated into your own projects. Whether you are building a custom vacuum, a fume extractor, or…
Onshape document: https://cad.onshape.com/documents/d61dee32ee29272d4de3c193/w/de3416779f49ff1e82f67b0c/e/bceac7a90f13b0e0e9732da6?renderMode=0&uiState=6570b5d942c1be02b0211471 Updated June 3rd to include the cable clip as requested…
This Fully Enclosed Open Source Cartridge Reader Shell (FEOS) is designed to be durable, well protected, and look stunning on your desk. The shell is a multi piece assembly, the shell base, the cover, battery and the faceplate. The “decoy…
This is a geometrically CORRECT Hirth joint. It includes SOURCE files and DOCUMENTATION. There are a lot of Hirth joints out there. Some are completely wrong, some are very close, but almost none of them are geometrically correct. If you…
A ball and socket joint with full Fusion 360 source. It's parametrized so the joint can be resized easily. It does use the standard thread tool so the thread size does need to be manually adjusted after changing the ball size. The default…
Box for 85mmx54mm card 35mm of storage You cant find cards size and height in 3df file parameter. Print an glue 5mmx1mm magnet. (see my board game collection : https://www.prusaprinters.org/social/38889-djedje_zr7/collections/72597 )
Variable Openmod This is a fully open source headphones designed to be easy to assemble, easy to print out without any supports. It is also made to be highly modular, capable of using most 40-52mm drivers. The overall design itself is…
Low profile, similar to stock backplate More holes ≠ better cooling Fan standoff to prevent the plate from pressing against the fan and blocking airflow Blocks turbulent areas so airflow is better directed Creates a negative air pressure…
This is a simple resizing of the Everdell baskets and lids by bubbarowley and jbelay (on thingiverse). I found that the lids were a little too loose when I printed them with PLA (absolutely could be my printer settings, I'm too new to…
I looked at a lot of frame reviews and tried to incorporate many design features that I liked into one drone frame. I recommend test printing it to see if your components will fit first as it is a fairly tight build. If slicing use the…
This film carrier provides great film flatness and smooth film feeding action while being quick to print and easy to assemble. This design is my attempt to improve on existing 3D printed film carrier designs, focusing on film flatness and…
IF YOU ARE ENCLOSING A PRUSA XL PURCHASED BEFORE JUNE 1, 2024 AND YOU ARE PLANNING TO PRINT WITH HIGH-TEMPERATURE MATERIALS, PLEASE FOLLOW THE INSTRUCTIONS OUTLINED VIA THE LINK BELOW CLICK HERE FOR PRUSA XL ENCLOSURE PREPARATION THERE…
*Donating to access the files through my Ko-Fi supports me and enables me to dedicate more time and energy to creating for the community. These files are also available for free on Thingiverse, Printables and Cults3D with the option to…
Magnetic Stacking Boxes to organize food, nectar and egg resource tokens. The boxes use 6x3mm round magnets. They have an actual size of about 2.7mm but have some variance both in diameter and height so while I've tried to make them press…
The Open Source Watch Winder (OSWW) is an open source high quality, modular, watch winder. For $40*, you can build yourself a 3 watch, watch winder, with user-replaceable parts. Key Features Quiet belt drive Bi-directional winding; winds…
This is my take on Wyrmspan resources. I wanted to resize the original pieces so they were all roughly the same size, but ended up remodeling most of them from scratch so I could adjust their shape as well. The gold bar is modeled after…
Some Shoes for the TBS source one V5 arms. Fit the 6mm arms well and have landing gear built in to save those motor screws. After seeing how others are using these turned the other way up they then protect the motor. Only require supports…
A small token and worker tray for the Everdell board game. It sits nicely against the main board and has a spot for all the workers at the back. I use the right side for point tokens. Due to the varying curves of the board, I made two…
Introducing the WT-01, the world's easiest wire EDM conversion! Designed for all desktop 3D printers, the WT-01 easily converts your FDM machine into a metal cutting powerhouse! Electrical discharge machining, or EDM, vaporizes any…
The shortened source cradle positions the source spool at a similar distance from the lead screw as the target spool. It's suitable when both spools are of similar size, minimizing space requirements.
I wanted a self-watering planter that I could insert in my various ceramic/plastic pots and would be fast, easy and economical to print. You can use this insert in pots you already have. Using the attached Fusion 360 file, change the…
I decided to share the unmanned ground vehicle project I made to improve myself by publishing all the design files and material list. The design process took 1 week, printing time 1 week (with 2 printers and 0.6mm nozzles). It is very…
Fits the TBS source one V5. A simple bumper to keep the bottom plate from being smashed up in a crash. Print in TPU with the opening down and supports for the holes only. Use the printer settings that work best for your printer.
Original model posted on Thingiverse by Ill_Drakon (https://www.thingiverse.com/thing:4318289). The original model was posted as a plant pot but I scaled it down and it works perfectly as a resource bowl for Everdell! Printed using a 0.6m…
Please like the model if you download it. It helps. Thanks! Included are the complete assembly of the Tessier.Work Willys MB Radio Controlled in Step and Fusion 360 format. If you want to print it, download the stl files here:…
No supports needed.
Cable chain? Umbilical? Introducing the SwingArm! We love to innovate and we constantly improve our existing printers. Even with the tight time constraints in the development of the CORE One, we reworked a vital part of the printer before…
PrintABlok are interlocking building toys created by the 3D Printing Professor, designed to work well on home 3D Printers. PrintABloks can be built in all 6 directions, allowing for gravity defying building unlike any other building block…
I am try to create new another water jet boat propulsion for RC models. Actual version used on by boat is "v12" It is complete open source (only for non-commercial use, another license on request) Do not hesitate to add comments about…
This ball joint allows a displacement of about 30 ° from its axis (the 25° is from an earlier version) and can be tightened. This is DieZopfe 's Universal Ball Joint design on thingiverse reuploaded here. They shared this design under the…
The O in ERROR was slightly higher than the rest and I didn't like the Base. I would suggest printing it face down.
Simple arc style notebook stand. You can easily change width and length of the stand. Default size is 22mm width and 170mm length for my Dell XPS 13. Works fine even for my Macbook Pro 15 (late 2013). Print instructions For the top part…
RepRack is BACK! Quick Overview: https://www.instagram.com/p/DZ07thcPyC0/ RepRack2 Features: Fully Reversible: Suspension style OR under mount bracket (corbel) style. Still good for filament but now you can easily make shelving too!…
# Printable TBS Source One V5 ## donate if you like…
My 3D printed accesories. Print in TPU.
Modeled and printed this as a gift for one of my best friends who I met through Garrys Mod many years ago. I wasn't a fan of how the existing models on Printables and Thingiverse connected the letters together; this one has a slight…
Parametric design of an simple hook in the free and open source OpenSCAD. Use with the Customizer in OpenSCAD. Customizable hook that can be changed in length (both horizontal and vertical), width, thickness, radius of the hook, type of…
This is a fully open source headphones designed to be easy to assemble, easy to print out without any supports. It is also made to be highly modular, capable of using most 40-70mm drivers. The overall design itself is also made to be easy…
First release of my modular rack system. Very plain at this current stage, only empty modules and bricks. You will need to understand basic CAD to get use out of the system at this stage. The included STEP file only includes blank…
Inspired by the design of sarman_1998 I created my own version which can be used in combination with PC4-M6 (and PC4-M10, see below) fitting PTFE tubing (6mm thread), and 2 M3 bolts + hexagon nuts. The code can be changed to choose your…
The OP3DRCSnowmobile is a fully working 3D printed RC snowmobile! Watch it in action: This is a project I've been working on for over a year and it turned out way better than I expected. A few years back I made the original…
| BASIC DESCRIPTION | 3D model of basic resources in the game “Settlers of Catan” containers area seperate models that you can find in the links below each of the resource has 5 slight variations | DESIGN DECISIONS | these models are very…
I do a lot of theater work and I could not find a good theater light model so I made my own is a ellipsoid this is my favorite light and took about 20 hours to design.
A simple card and resource holder I made for playing Everdell and Wingspan. Could be used for a variety of board games.
The Ropener is an open-source motorized curtain opener that retrofits onto your existing curtain rod. Silent stepper motor, ESPHome-native firmware, no cloud, no app required. Works with nearly all curtain types. WHAT IT DOES Pulls your…
Axon is an open-source robot that uses AI. It can move its arms and head, and it can also drive around. It has AI-powered speech recognition, so you can control it with your voice. It uses a database of questions with actions, along with…
Shelved design, main-spring housing don't fit my standards and inefficient, but a shame to put to waste so anyone with the know-how have at it.
Welcome to the Tiny John! Inspired by the massive, room-dominating "Big John" horn setups taking over the audiophile world, I wanted to engineer that same dramatic acoustic presence into an affordable and desktop-friendly form factor.…
made to be pressfit screws are passthrough so tpu is not inbetween the screw and the arm.
This is an OpenSource Yoke to be used with flight simulators! Due to a bug in Thingiverse's website (never emailed me back!), the first version exists only as a link and was not posted on my maker page or in searches. This is a re-upload…
A mount for the GoPro for the 5" frame TBS Source One V5 (only the V5 since apparently the versions are very different. All you need is the frame, a GoPro (I use an 11 Black), the screw that fits any GoPro hardware and an M5 bolt that you…
Simple squeegee based on 3M glod series P.A.-1 or Avery's, same flexibility, same size. Quick and easy, and pretty useful not much filament spent. This is the ideal tool to apply build plates sheets like PEI, BuildTak, Kapton or Painter's…
With just some nylon threads, 6 motors, and an Arduino, you can build your own hand. I'm also sharing the code. It’s more of an aesthetic solution, and it's also intended for robots. Here in action: When printing the fingers, set the…
This is an insert / organizer for Grand Austria Hotel with the Let’s Waltz expansion (retail versions of both) and the Meeple Source upgraded wooden food across the base and expansion boxes. It supports premium sleeves (Gamegenic Prime…
Overview: To replace the tokens in a Wingspan game you have to print 29 of the base resources (i made 30, so it's a round number) and 70 of the nectar resource. You should use different colors of filament if you can help it. Painting them…
A set of parts for TBS Source One V5 includes: FPV holder - TPU ELRS holder with tx spacer - TPU GPS holder fit modules similar to Walksnail WS-M181 and Matek M8Q-5883 - TPU Front bumper - PLA or similar Capacitor and buzzer holder
I made this to hold my Betafpv Lava 450 packs, but you can find the (super simple) source in the downloads so you can easily edit the dimensions. Print out of TPU.
This project is designed to help you stay on track with your focus sessions, using a simple and intuitive interface via a rotary encoder and an OLED display. Whether you need to time focused work, breaks or other worthy pursuits, this…
www.davidh.cz Gopro Hero 9 black tested FilaFlexible40
We've created a basic, custom filament holder to compliment the Universal 3D Printer Enclosure. There's also a modifier that allows you to try different infills for each filament holder if you would like. Please see the Instructions PDF…
Source dragon of strength icon from Dragons Rising! Not intended to be used as a weapon. This one was fun to make, completed in 5 hours. Please post a make if you make any of my designs! I'm always looking to improve them if I can. Let me…
I wanted multicolored resouces for Wingspan with color on both side. Original project was perfect, but those tokens was too big and too thin (3mm). So I resized them to 80% but made them 5mm thick while keeping 0.6mm top and bottom…
This is a Mount for the Runcam Thumb Pro, based off the rather nice looking model by JoyMonkey (available here: https://www.thingiverse.com/thing:5433478 ). I plan to make some various other mounts for this camera,so stay tuned, and don't…
TBS Source One V5 FPV Cam mount to fit 19mm camera. Gives your camera a bit of give in a crash. The camera plates wont fit so those will have to be removed. Print upright with no supports.
This is the Open Stick, a 3D printable full sized arcade stick. This is a modular design sized to fit most printers. This was printed in matte black and matte red PLA from Bambu. ## Printing and Construction: This project is a work in…
![CadetYoke v2.0 [Open-Source Yoke for Flight Simulators]](https://media.printables.com/media/prints/68980/images/753650_9a34664b-1e5f-4f20-a71d-b6d279dcd5f2/large_display_20210520_19434253453453952_68980.jpg)
