1106 modeli
I used Prusa-slicer to alter the original design by NotLikeALeafOnTheWind. I needed something that I could actually hold onto to stall the motor easily. Quick Print under 10 minutes.
Wydruk około 0,14 €–0,18 € nettoWstępna wycena jednego wariantu
Those spacers offset the top of the leadscrews by 13mm and reduce the depth of stepper mounts main hole. On my 250mm Formbot Kit, the leadscrews are a bit too tall in my opinion because the top of the front leadscrews can be hit by the…
Wydruk około 3,66 €–4,48 € nettoWstępna wycena jednego wariantu
Digital File to DIY 3D print (Cover ). 5 x STL model files included for different wing size (0mm, 30mm, 50mm, 60mm, 70mm). 1 x 3MF model file (prusa slicer) Installation: I used original masso cover screw. Each screw is long enough. Wire…
Wydruk około 1,67 €–2,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
before printing, check that your motor is a nema 17
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
This is a stylish, 3D-printed decorative cover designed specifically for the extruder stepper motor of the Ender 3 V3 SE equipped with a silver motor. The model features a bold design with customizable front panel accents, like the red…
Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu
ZWO EAF (Electronic Automatic Focuser) is popular among astro-photographers, becasue it works fine and is relatively inexpensive. However, once it is attached to the focuser-axis after removing the turning knob of focusers, one looses the…
Wydruk około 0,51 €–0,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Do not guess the direction of your stepper motor any longer while developing code - just use a clockhand-style pointer. These parts are press-fit for NEMA17 axis, just print it with an as-fine-as-possible setting (I used 0.1mm Layers in…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ender 3, CR10, Sunlu S8 and many more printers have 2040 or 4040 extrusion bars on which the z-axis stepper motors are attached. This univeral mount does: Allow you to align the distance beweetn the stepper motor and the z-axis (common…
Wydruk około 5,34 €–6,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The model is best printed with the stepper motor interface face-down on the build plate, with a slight brim around the outside.
Wydruk około 1,59 €–1,94 € nettoWstępna wycena jednego wariantu
Why I made this as a gift for a professor after completing advanced control systems. Notice: Not affiliated with Quanser.
Wydruk około 5,50 €–6,73 € nettoWstępna wycena jednego wariantu
After upgrading my Fans, the Stepper Motor was screaming out for attention. This simple cover just slips-on and adds a finishing touch.
Designed to need only the things that came with your SG90s(and maybe your 28BYJ-48 stepper too...), tried to make it easy to print, minimize number of pieces(though there are still a few), difficulty of scaffolding removal, etc. All…
I wanted something beautiful to somehow hide the stepper motor there. I combined and put the cable as high as I wanted from the beginning to have a smoother curve, without disturbing anywhere else and more good position for cable chain .…
Z-Axis Stepper Motor Mount with integrated Axial Thrust bearing. The Axial thrust bearing combined with a rigid lead-screw compression coupler completely eliminates Z-axis banding caused by the stepper motor “wobbling” under the weight of…
slip on - hex cover for Ender 3 v3 SE stepper motor
Discussion A replacement mainboard cover for the Qidi Plus4 that allows for the use of an 80x25mm fan This is a variant of my other honeycomb design posted on Thingiverse This variant positions the fan more centrally over the hottest…
I love this design by mbrady because it sends air where you want it, rather than randomly blowing it away like the top down models do. I oriented my Octopus so this blower shoots the air straight out the back of the base. I used a nice…
This is a 28BYJ-48 stepper motor mount. It's the stepper motor that comes with the Elegoo Arduino starter kit. Will allow you to attach the motor into this 3D printed part and then you can attach it to a flat surface. Print Settings…
Build Mod Hack 5mm to 8mm Coupler This is intended to fit a 5mm shaft of a stepper motor that has a D shaft and a 8mm lead screw Dimensions: D = 20mm H = 25mm Printing: Nozzle 0.4mm Layer 0.2mm Infill 35% Min. Hardware: Screws: 2 - 3mm x…
Disclaimer : this model is a work in progress and it may contain some dimensional inaccuracies. This model is meant to be used as an asset in CAD software. I don't recommend to print this model as it is. It's not optimized for FDM…
Stepper Motor Dust Cover - X/P Series Protect your XY stepper motors from dust with ease using this straightforward print. Unlike other solutions that involve clips that can potentially damage belts, this design offers a clean and…
Minimalistic Motorized Roller Blinds via esphome and homeassistant. To automate your roller blinds for: open blinds slowly and noiseless when waking up, coupled to your alarm clock close blinds on hot summer days control blinds if you are…
Works with motors up to 40mm in height and have the nema 17 standart. Wall line count should be high since they will endure the pressure of the screws I used 7 but 5 should be enough. Print with legs straight up not on it's side(like the…
对于同一电机，2mm轴的成本为59元，而5mm轴仅成本为8元，简直不可理喻。我在互联网上找不到修改后的版本，看来我只能自己做一个了。 For the same motor, the 2mm shaft costs 59 yuan, and the 5mm shaft only costs 8 yuan. It is unreasonable. I can't find a modified version on the Internet. It seems that I…
Stepper pulley remover for the K1 nd K1M stepper motors. This was designed in an effort to remove and replace the 36t pulleys on the stock steppers, this resulted in a shift that lowered the threshold of VFA from ~250mm/s to ~175mm/s. We…
Y-Axis Stepper Motor Mount for the Creality Ender-3 S1 and S1 Pro This makes use of the spare "z-axis end stop" included with the printer. The regular y-axis end stop has no mounting holes in the pcb and is a flawed design for silent…
You will need M4x6x5 heat inserts. If you would like to use something else or screw straight into plastic, there is also a .step provided. M4x10 screws are a perfect match for attaching the stepper drivers but make sure the head isn't too…
I made this by request to match My other covers use 2pcs M4x10 + T-nuts print upside down with NO supports If you like my design feel free to tip my design https://www.paypal.me/Djdenzo Print Settings Printer Brand: Creality Printer:…
See https://www.amazon.com/gp/product/B087B5NWY4/ref=ppx_yo_dt_b_search_asin_image
This is a 3D printable model for a peristaltic (aka hose) pump for either 3mm or 4mm silicone hoses operated with the popular and cheap 28BYJ-48 stepper motor. The motor is usually sold with a fitting driver shield and there are various…
This is a remix of CG-Tech's excellent extruder stepper motor cooling fan add-on on Thingiverse. EDIT: I've uploaded a second version with deflected air ducts, based on CG-Tech's alternative one. It was a quick bodge and the stl file is…
Cover for Ender 3 V3 SE Stepper Motor Print Settings Printer Brand : Creality Printer : Ender 3 V3 SE Supports : Ver 1.0 : No Ver 2.0 : Yes Layer Height : 0.2mm Infill : 10% Filament : PLA
Thanks to djos_1475 for sharing his design. Modified the design to use M4 screws/t-nuts to secure the mount to the 2040. While at it, added: some clearance around the axial thrust bearing to allow for slightly larger flexible coupler; a…
It seems like it would be super irritating to remove bits of debris from the MK4's Z-Stepper mounts. While it seems much less likely to drop a “nozzle drool” line than the MK3 was, it still seems like a good idea to keep them covered.…
A simple holder for AS5600 magnetic encoder that can be used with a NEMA17 motor. Details here : https://community.simplefoc.com/t/simplefoclibrary-support-for-stepper-motors/137/42 Category: Engineering
Additional parts: 3 mm washers (14x) M3 x 30 mm bolts (4x) M3 x 16 mm bolts (4x) M3 x 10 mm bolts (6x) M3 x 20 mm bolts (3x) M3 nuts (13x) 6808 bearings (1x) 623 bearings (6x)
A simple mount for a 28BYJ-48 stepper motor and driver board to keep things tidy. NOTE: Just got a batch of 28BYJ-48s. Motor mount fits well, but the driver boards were a tiny bit large for my control case, so you may have to scale yours…
STEPPER MOTOR BRACKET Inventables. This is intended for prototyping. Print instructions Category: Hobby Summary STEPPER MOTOR BRACKET Inventables. This is intended for prototyping.
Since i run a CAN setup i've remixed a mount for my EBB36 on my toolhead. I've included a PG7 gland holder so that i was able to mount it close to the toolhead and ran my umbilical wire through it. Since i currently run Tap i also made it…
Cover for X-Axis stepper motor only OR with cable holder. I wanted something beautiful to somehow hide the stepper motor there. I combined and put the cable as high as I wanted from the beginning to have a smoother curve, without…
Nema 17 Gearbox with 5mm shaft, fits GT2 Timing Belt Pulley. Remix of: http://www.thingiverse.com/thing:8460 Cover is in two versions with or without 4mm holes for M3 threaded inserts. Bill of materials: Nema 17 stepper motor M3 nuts 6pcs…
EDIT: Díky četným žádostem jsem vytvořil i variantu se zámky, která na stepperu drží pevněji. Víčko chrání otvor Z stepperu tiskárny Prusa MINI před vnikáním prachu a nečistot. Původní verze sedí na místě volně, aby se dala snadno…
Update nov 2025: The spacers were a bit too short, which may have caused the lamellas to be slightly too squashed. I apologize for that. The new spacers should work better. Ideally, secure them with self-locking nuts and perhaps don't…
Here is a good use for a stepper motor that would otherwise sit around and collect dust. This is a work in progress and the results so far look promising. I wanted a design that was simple and that didn't require any hardware. No screws…
A simple holder for the AS5600 magnetic encoder. The boards press fits into the the holder. It uses the mounting holes already on the stepper motor. Printing downloads 0.2mm layer height No supports required
A remix of D_Jespersen's fantastic stepper covers. My Ender 5 Plus had a motor that was about 6mm bigger than the one the original model was designed for. I'm not sure if this is a feature unique to the Ender 5 Plus, or if any Ender 5…
Stepper Motor Cover (with hidden cables) for Ender 3 V3 SE/KE
A manual bottle cutter made from a few 3D printer pieces. Cuts a 6.5+/- strip of plastic to feed into a PET filament recycler, like The Recreator 3d or PETbot. I like the community cutter with bearing, but I have no way of grind them…
Modeled in Siemens NX. Printed the Planet and Sun Gears out of Nylon with 0.25 Nozzle at 0.07mm layer height and 100% infill, the Carrier out of Nylon with 0.4 Nozzle and 0.1mm layer height and 100% infill, the rest out of PLA with 0.4…
This model is meant to be used as an asset in CAD software, not to be 3d printed. My ultimate goal with this CAD model series is to release at some point an assembly model of the whole K1 to help creators design amazing things for this…
Only top is rounded, to make printing easier Printing notes: Prints in-place, no supports This models assumes a fairly well calibrated printer, but you probably don't have one: Try to print as-is at the start If axles don't fit properly…
This will fit stepper motors type 42-34 as found in many kits. Print Settings Printer: Elegoo Neptune 2S Rafts: No Supports: No Resolution: 0.15 Infill: 30 Filament: Your choice, I used PLA Notes: Print with the top plate face down…
Schrittmotorhalter Nema17 / Stepper motor mount Nema17
Mounting plate with 10 Lego technic compatible peg holes that clips round a standard, cheap 28BYJ-48 unipolar stepper motor. The stepper motor drive axle is perfectly aligned so as to mesh with other technic gears. Printed on an TronXY…
Stepper Motor Nema 23 length 41-115mm shaft D8
Printed out without supports or rafts. Layer:0.2 Nozzle 0.4
Build Mod Hack 5mm to 8mm Tall Coupler This is intended to fit a 5mm shaft of a stepper motor that has a D shaft and a 8mm lead screw Dimensions: D = 20mm H = 37.5mm Printing: Nozzle 0.4mm Layer 0.2mm Infill 35% Min. Hardware: Screws 3 -…
Two 32 teeth pulleys for 12mm HTD 3M (3mm) timing belt. The pulleys has the hard to find HTD profile and has god grip with the timing belt. One pulley is for the stepper motor 8mm shaft and the other pulley is for the 10mm key indexed…
⚠ THIS MODEL IS NOT FOR 3D PRINTING — it is a CAD reference body for use in Fusion 360 assemblies only. A parametric NEMA 17 stepper motor model designed for use in Fusion 360 assemblies. The geometry is intentionally simplified (no…
Quick settings for those who are in a rush: PET-G, 3 perimeters, 20% cubic infill, 1 mm top and bottom, I made them with 0.2 mm layer heights but you can also make them with 0.3 mm layer height Also for the Y stepper mount you'll need to…
Robot Arm: 4x Servo FEETECH 25KG Servo Motor 1 stepper NEMA 17 Bearings from ender 3 printer m3 Screws
Print settings: Printer: Creality Ender 5; Rafts: No; Supports: No; Resolution: 0.2 mm; Infill: 20%; Filament: ABS.This is my slowly and gradualy desgined cable chain for my beloved Ender 5 with Micro Swiss Direct Drive. It is a remix of…
This is a rendition of the Y-axis stepper motor housing on the E3S1Pro that is remixed from a model on Cults3d.com by Blu-Square for the Ender 3 S1. The original model did not allow for the usage of the OEM endstop, so I modified it to…
Part of my ongoing series of models to enclose my Mercury One.1 These stepper mounts do three things: They are contained entirely within the frame of the printer so that the printer can be easily enclosed using large, flat panels. They…
This is a slim and significant lighter stepper cooler for a 40mm Noctua fan. It is lighter because it works without screws. In my tests the stepper is not geting warmer than 45°C. The shaft with the drivegear stay at nearly the same…
This is a 3D model of E3D Titan Extruder CLONE with a stepper motor and it's mount. All of the parts that are in this assembly are in my other projects so if you are interested take a look. The project was drawn in Autodesk Inventor 2021.
After I upgraded my Ender 3 Pro extruder to a Micro Swiss Direct Drive, cable management became an issue. Thus, I decided to embed all cables from the extruder into a cable chain and lead them to the rear-box, where the controller board…
The holes are printed tapped for an M4 thread. You will need to print one tab for the bracket. It can be found at: https://www.thingiverse.com/thing:3401942 or https://www.prusaprinters.org/prints/8512-din-rail-mounting-tab Category:…
A simple slide on cover for your 28BYJ-48 Stepper Motors. No other hardware necessary for mounting. Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator 2 Rafts: Doesn't Matter Supports: No Resolution: 0.2-0.3mm Infill: 10%…
adjustable Stepper Mount Nema 17 This adjustable Stepper Mount was designed for a DIY laser cutter project. The Stepper Mount is fixed with two M4 with 20mm screws and T-Nuts. The case itself is attached to the item profile with two M4…
A NEMA17 stepper motor mock-up with a rotating shaft and face mounting capabilities. Print Settings Printer: Prusa i3 MK2 Dolly Rafts: No Supports: Yes Resolution: 0.2 Infill: 10% Post-Printing Remove supports and clean up. Assemble…
Fysetc Spider Stepper Driver Cooling. Tests with versions 2.1, 2.2, 2.3 and 3.0.
Update V4.2 Fits on my MK3s+ upgrade without any issues. hint!!! After replacing the heatbreak with an original e3D, we were able to print the material that never ran before. most PLA filaments works very well (many times printed over 20h…
This is an FDM friendly model of to my original model that I had made geared towards resin printers. https://www.printables.com/model/413139-creality-ender-3-s1-pro-stepper-motor-y-axis-endst
This is a bracket/mount with an integrated belt tensioner for nema 17 stepper motors. You only need the two printed parts, 2x M3x40 socket head cap screw and 2x M3 threaded insert brass nuts. Now you can fine-tune the belt tension of your…
Basic Nema 17 Spacer with Step File for any custom spacing you require. I printed mine as per below: Printer: Ender 3 V2 Material: ABS+ (As mine was going in a heated enclosure) Filament Brand: ESUN Infill: 30% (So i could clamp the motor…
Slightly remixed the model because the front base was interfering with the back of the rail mechanism of the print head
Strong and easy to print bracket for Nema 17 stepper motor. Bracket was designed from scratch for my DIY 3D printer. Main goals for design : bracket must cooperate with end mount for motor screew ( this means that some of its dimmensions…
Krabička pre ovládač krokového motora ZK-SMC01 @https://www.aliexpress.com/item/1005005124688985.html Vytlačené bez podpory. PETG / vrstva 0,2 / obvod 4x.
This is a sample model of the mechanism that converts the rocking motion of the lever into the rotary motion of the gear. The gear will not rotate smoothly but in steps. Other necessary components: 2x screw M3 1x spring D4-20 (from…
Latest update: 05AUG2019 Work in progress! This is a Pan and Tilt mechanism driven with NEMA17 stepper motors. This design is a modification of the design by thingiverse user 'buffcleb' at https://www.thingiverse.com/thing:1396552 (Latest…
A simple merge of two Y-axis housing files. Main body of the mount that accommodates adding a damper from Nathan here . His model was made to hold a different Y endstop so I merged it with the endstop housing from Matthew here: here . II…
voici le cover pour le ender 3 v3 ke faire attention le moteur de l'axe x n'est pas la meme hauteur que la ender 3 v3 se imprimer a une vitesse de 150mms avec un infil de 20% imprimer avec un support pour seulement lui de 50mm
Clamp that retains X Stepper wire and sleeve. Eliminates bending action when Z travels up and Down. Print instructions Use 3mmx10mm screws with 3mm hex nuts. Requires large Zip tie to fasten to Motor.
Material List: 1x 28BYJ-48 (5V) 1x Stepper driver board uln2003 1x NodeMCU 1x 608rs bearing 1x M8 x 16mm bold 1x Powersupply 5v 2x Screws and dovel to mount it to the wall 9 - 13x M3 x 10mm Screw 2x M3 Nut I did use a universal PSU with…
Changed fillets to chamfers for easier overhang printing.
The model I have designed is intended to provide more effective cooling for the stepper motor of the Y-axis of your Ender 3 S1. The stepper motor is optimally cooled with a 60mm fan that is fastened with 4 M3x16mm . The model consists of…
I installed a linear rail kit with a rail mounted to the top of the y extrusion. This caused the belt to angle up and rub against the stock Y tensioner and the belt hole for the Y stepper mount. There are models that I made to replicate…
Lower the stepper height so as not to lose Z when using coupler. Scale Z to get the height to your liking. It's currently 22,5mm, which fits close to the Voron Trident's original stand. Recommend printing with ABS.
I printed the cover with Extrudr PLA NX2, because it is mechanically and thermally more resilient than conventional. I will send you an update when I have printed the part in Prusament PETG. Additionally, I will attach a suitable file for…
Multiple various sizes of stepper and DC motor mounds/stands. All the mounts will sit flat on the table but can also be screwed down to something if desired. Mounts Included: NEMA 6 Stepper Motor Mount NEMA 6 Stepper Motor Mount NEMA 6…
Nema 23 stepper motor mount Print Settings Printer Brand: Creality Printer: Ender-3 S1 Pro Rafts: No Supports: No Resolution: 0.16 mm Infill: 30 % Filament: Polymaker Polylite ASA Black Category: Parts
A simple offset board for the ULN2003A (green) motor driver boards that are available on AliExpress. I connect the board with 4G x 6mm self-tapping screws and then super glue in place on models as needed.
Made this fan mount clip for stepper motors as I needed to attach a fan and didn't want to use cable ties or anything that's semi-permanent. This clip style is easy to attach and detach. For 40mm fan. Can be adapted to smaller fans, I'll…
Complete: This is a cover for the stepper motors and belts at the rear of the chamber for the Qidi plus 4. After a lot of prototyping and testing it is complete. This model was designed to fit the printable adjustable belt tensioners by…
Creality K1 XY Stepper Motors CAD Model : Nema 17 42-60mm 5-40mm shaft GT2 36 teeth pulley Left (X) BJ42D41-14V06 - Right (Y) BJ42D41-14V07 This model is meant to be used as an asset in CAD software, not to be 3d printed. My ultimate goal…
Additional parts: 3 mm washers (18x) M3 x 12 mm bolts (18x) M3 x 20 mm bolts (1x) M3 nuts (19x) M5 x 70 mm bolts (4x) M5 nuts (4x) 623 bearings (9x) 6005-2RS bearing (1x) 6704-2RS bearings (3x) 10 mm x 10 mm steel profile as output axis
A simple but effective way to cool your extruder motor. Mine peaked at 85°C and I was looking for a way to cool it. I didn't have problems but read around the internet that this can cause jamming since the gears can get hot causing PLA to…
I have noticed that the stepper motor of the X-axis on my Elegoo Neptune 4 Plus gets veeeery hot, especially at print speeds above 200mm/s. To extend the lifespan of the stepper motor, it needs to be actively cooled. I bought a 40mm 5V…
