254 modeli
Do not put in the dishwasher, the PLA would not withstand it. Introducing the Table Crumb Sweeper - Kitchen Assistant , your ultimate helper for keeping tables, countertops, and other flat surfaces tidy! This tool combines a sleek dustpan…
Wydruk około 2,04 €–2,49 € nettoWstępna wycena jednego wariantu
I printed some "Trash Bin for Sweeper Car" https://www.printables.com/model/324597-trash-bin-for-sweeper-car-popelnice-pro-cistici-vu). I use them to collect filament poop from changing material, support structures etc. But there is no…
Wydruk około 0,14 €–0,18 € nettoWstępna wycena jednego wariantu
Cleans the T-Slot on a milling table. T-slot size: Tee Width: .700", Tee Height: .280", Slot Width: .406 Used default slicer settings for PETG material.
Wydruk około 0,37 €–0,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Bristle deflector for Ryobi Cordless Debris Floor Sweeper 18V ONE+ (R18SW3)
Wydruk około 0,62 €–0,76 € nettoWstępna wycena jednego wariantu
Cleans the T-Slot on a milling table. T-slot size: Tee Width: .670", Tee Height: .305", Slot Width: .420 Used default slicer settings for PETG material.
Wydruk około 0,37 €–0,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
( Please suggest in comment a better title, summary and description , had hard time to explain it. I will update this product infos with your suggestions.) On the picture I finger point the 3D Model. details: Suitable for various…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
A desktop nameplate, sweeping around in a circle. Customize it to show your name or text. To do that, use the makerworld customizer (fonts are only Arial currently) or install OpenSCAD on your own computer and follow the customizing…
Do you need a spiffy name tag? Here you find over 1200 names , ready as 3D sweeping name tag sculpture. This is a different design than the previous ones, a. o. it has a square base. Customizing: You can also customize the model to show…
Designed another super short nozzle for my M18 Fuel blower to help with cleaning tasks around the shop. This one has a sweep/broom/wide opening, especially useful for drying your car. I printed at 1.5mm line width using a 0.8mm nozzle and…
A PLA/PETG printable bottom case for the Ferris Sweep v2 . The case is designed to accommodate one layer of 2mm thick foam that sits between the PCB and the bottom case. The foam slightly deepens/mutes the sound of the choc switches…
I made this for the NeedItMakeIt fan duct contest and it won! It's a lightweight high performance fan duct for the FLSUN T1. This was a first attempt at a fan duct (for a printer that I don't even own lol) so I'm pleased with the results.…
A mystical loom weaves resplendent spiraling pleats from the very fabric of light. Open source version of https://cosmicjubilee.com/designs/pellucid-sweep/ - available to buy now! A tealight holder whose base gradually develops into a…
material PLA a 21 millimeter long piece of filament is used as a pin, which you insert into the hole in the lid and the bin
Do you need a spiffy name tag? Here you find over 1200 names , ready as 3D sweeping crazy name tag sculpture. This is a different design than the previous ones, a. o. it has a square base. In total there are 11 GB of STL here, so please…
This is my take on an infinity style photo backdrop stand. It has built in clips to hold the paper. I added springs to enhance the grip on the paper. No support needed. This is not a "remix" technically as I designed mine from scratch but…
Update v2: Fixed some errors and not working parameters Download openscad and the script. Open the script in openscad Customize the parameters Text, Font and Size of the tag Height (Baseline) of the tag Angle Degree of the sweep (90deg in…
Simple Tenting Mount for Ferris Sweep v2 Case Model provided is for the left hand side, mirror it in your slicer to get the right hand side. Print with 0% infill. Takes about an hour per side using a 0.6mm nozzle. I have provided a few…
I wanted a light box for taking pictures of 3D prints, but they take up so much room. The Photo Sweep is a quick and easy way to provide a background. Simply use a piece of paper and clip the two stand in place. v2 - Updated version here……
A printable sleeve case for the Ferris Sweep Bling MX . It's a bottom case that covers the bottom part of the PCB. Its intended to be used with any standard Sweep Bling MX Switch Plate. Important : this sleeve case was designed with N!N…
Customized version of https://www.thingiverse.com/thing:3045130 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing\_id=3045130 Instructions Using the following options: faces_segment = 10 textstring1 =…
Its a sculpture showing a side-by-side text message, with a symbol in the middle. You can customize the model to show your most favourite couple. Please install OpenSCAD on your own computer and follow these instructions . Thanks Thanks…
Adapted from the game files, this is the Sweepa Pal from Palworld in High Resolution, and separated into multiple parts for easier multicolor printing! Feel free to use the same color for all parts if you prefer to paint afterwards.…
Just a simple & minimalistic Case for the Ferris Sweep Bling Low Profile Custom Split Keyboard The Standoffs have a diameter of 4.5mm and 2mm Holes with a M2 Thread
A street sweeper truck, also known as a street sweeper, is a specialized vehicle designed to clean streets, roads, and other paved surfaces. These trucks are equipped with various cleaning mechanisms, such as brushes, vacuum systems, and…
Ferris Sweep 2.2 ( https://github.com/davidphilipbarr/Sweep ) case with cutouts for the switches. Remixed from the excellent design by Knifa. Added cutouts for the USB ports on the nice nanos as well as added a chamfer to improve the…
Printing: Just print it without supports, base down as in the STL. It will print fine!
Roomba Replacement Roller Sweeper fully customizable written using openscad tested with Roomba I4 should work fine with i3 i3+ i4 i6 i6+ i7 i7+ i8 i8+J7 J8 /Plus E5 E6 E7 I,E & J Series Settings Warnings roller_sweeper_aggression - the…
Its a sculpture showing a side-by-side text message, where each part can have different font / font size. You can customize the model to show any text you need. Please install OpenSCAD on your own computer and follow these instructions .…
This was designed for a friend who specifically needed a ferris case which was portable but also had a tent for ergonomics. Picking Parts: At the time of writing, this model has three different versions. Pick which version you want from…
A spherical planter, perfect for indoor plants. The model features a modern design with sweeping lines that create subtle light and shadow effects. It's excellent for small plants or herbs and adds a unique touch to any room. I've also…
First submission for the 2024 3D Printing Industry Awards! Arched Sweeps
I wanted a light box for taking pictures of 3D prints, but they take up so much room. The Photo Sweep is a quick and easy way to provide a background. Simply use a piece of paper and clip the two stand in place. This is an upgrade to my…
A tenting case to holster this print: https://www.printables.com/model/215167-ferris-sweep-v2-case Print with tree supports if you can Recently added 10Deg version UPDATE: Uploaded my openscad files to allow for modification. The files…
Fusion 360 – 3D Sketch & Sweep Practice This project contains the reference files used in my Fusion 360 tutorial about creating 3D sketches and tubular geometries . Watch the complete Fusion 360 tutorial here: The exercise is designed to…
This little crumb sweeper is just like the ones you see at the fancy restaurants, complete with a 3D printed roller brush. A few sweeps back & forth (works in either direction) kick the crumbs up into the little catch tray. The hard part…
The UV Sweeper is Patent Pending and will be sold directly only through www.3DReefing.com Organisms like sand dwelling dinoflagellate's have plagued the aquarium hobby for decades. With the UV Sweeper you will be able to target eliminate…
Update: I refined the model to save material and improve flow over previous version. Created for my Craftsman Professional Table saw which is the same as a 90's era Delta Cabinet Saw. The original dust port sticks straight out of the…
screw for the side brush of the Kärcher S 4 Twin sweeper
Three part wireless Sweep Bling LP case inspired by geist's TOTEM . Without any bumpons attached the case retains the same overall height as a naked PCB build. The case is split into three pieces: a top part, a switch plate and a bottom…
Customized version of https://www.thingiverse.com/thing:3045130 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3045130 Instructions Using the following options: faces_segment = 10 textstring1 = Have You…
Borrowing from the original description here: "A PLA/PETG printable bottom case for the Ferris Sweep High . The case is designed to accommodate one layer of 2mm thick foam that sits between the PCB and the bottom case. The foam slightly…
This is a Roomba series 675 side sweeper drive gear replacement. It is perfect for printing if you stripped the screw hole in the original gear or your original gear's teeth started grinding off. Print Instructions Material: PETG, ABS or…
Individual Letters to create your own sweeping name/text plate using individual STL files that you can use in Blender, TinkerCAD or other 3D software that works with STL files. You can also print them as is after converting to gCode in…
Printed at .28mm layer height in PLA 13 mm^3 volumetric flow rate and 100% part cooling fans, 80% auxiliary fan after the first layer. 2 walls and 25% gyroid infill was used making it quite strong, infill may be able to be reduced but…
Royal Enfield Sweeped logo. No support needed. About 4 huous print.
Case for wireless build of Ferris Sweep Half Swept that lets you snaps the halves together and drop it in your pocket. It consists of the bottom case, middle plate and a controller cover. Controller cover is placed higher to leave space…
Thingiverse Link: https://www.thingiverse.com/thing:106568 Made By: HPaul (Thingiverse) Original Description: This stand provides a sweep, or curved, seamless background for photographing small to medium sized objects. It will hold…
A name plate, sweeping around in a circle. Customize it to show your name or text. Have fun! Instructions You can print it without any support, as long as you leave the cut-angle below 90 degrees. The example shown uses the Aldo font. If…
Use it to sweep the interior of the bambu x1.I print with PETG and TPU.no Supports.
Hi, this is a shallow sweep ramp for the centauri carbon. It is to help get out to the material from the bottom of the printer. There is a shallow groove on the back for a double sided 3m tape to be place to keep it fixed For non multi…
After making my sweep bling low profile with choc 1s, I couldn't decide whether I'm going with no case at all, with only the case, or with a stand. So I tried them all, each with their own rubber feets attached. This does make the whole…
Don't print in a conductive filament. Tested in PLA. FreeCAD, step and stl files included.
This model is a floor sweep attachment for two types of vacuum systems. The first variation is for a 4in shop dust collector using standard 4in flexible hose. The second is for a Dewalt 8 gal Shop vac. The design was inspired by other…
Floor sweeping and collection will allow you to leave workshop floors, machinery and workbenches spotlessly clean.This set up now allows you to vacuum large areas of the workshop floor with ease and without bending Designed for use with…
material PLA a 25 millimeter long piece of filament is used as a pin, which you insert into the hole in the lid and the bin screw 2x M3x6 37x44x50mm
Fully parametric Fusion 360 CAD model “sweep tee” for pipe or hose. The parameters are all WYSIWYG visible and editable in design mode. Double click any callout in design mode to edit and update the model on enter. All three ends can be…
A simple floor sweeper (Swiffer) with TPU attachment wipes. Can be used with whatever fits like dryer sheets or old rags. There is a small (140x125mm) and wide (180x125mm) version. This file uses the pole attachment parts from the Dryer…
rather than pay a small fortune for the factory replacement, i gave this a shot. tested initially in PLA and didn't have any issues. the hardest part is transferring the rubber tread from the original to the new wheel without breaking the…
Middle plate used for the Ferris Sweep. No special instructions for printing.
Hi there! This case allows you to transport your Ferris Sweep keyboard. It fits perfectly my Ferris Sweep Bling LP, equiped with the nice case of @prolucker23 . If you prefer a thinner (but longer) case, check my other travel case design…
Now with a slightly redesigned profile, and 12 fins to allow for easy color patterns. Aesthetic intakes for shallow NATO 40mm threaded connections. Print threads pointing up. This and more also available fully printed and shipped:…
The customizable file is included as an .f3d file. You should edit the two text sections and adjust the length of the plate as needed.
Just a quick, simple model that I made in tinkerCAD to cover the micro-controllers on my ferris-sweep compact keyboard. Material: PLA Layer Height: 0.2mm Inspired by https://www.thingiverse.com/thing:5190793 (I believe this is for a…
+++ I'm currently looking for betatesters for this model! If you own an Otto kit and want to help please let me know. I'll give away free FlexiDinos models to all the betatesters, just reach out if you're interested. +++ This is my entry…
Nowadays is actually impossible to find the original side brushes for bobsweep robot vacuums so this allows you to adapt the very common Roomba 800 series side brushes. Print instructions…
Customized version of https://www.thingiverse.com/thing:3045130 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing\_id=3045130 Instructions Using the following options: faces_segment = 6 textstring1 = I`m…
This is a customizable base that works with any of Flowalistik's Trophy set cups. Base and plaques are easy to scale. I found printing everything at 300% made for an ideal trophy size. Once you print the base and plaque, head over to…
Case has indentations on the bottom for 8mm rubber feet, but would also work without them. Tried to make it as slim as I could, so the thickness of the plastic between the bottom of the contacts the bottom of the case is 0.5mm. Also has a…
Cobra Kai - Sweep the Leg No Mercy, License Plate Frame, Karate Kid Category: Signs & Logos
I've been inspired by all the various Sweeping name plate templates, but I enjoy modelling as much as printing, so I remade the basic model using FreeCAD. To change the text that is printed, check out the FreeCAD screenshot. Select "NAME…
A case to transport a Ferris Sweep keyboard, tested with a Bling LP equipped with the nice base case from @prolucker23 . It may be too low for a MX model, but you can adjust that easily using the step model files, or drop me a message…
Description This case is for Sweep Bling MX keyboard . Tested working for DSA and XDA keycap profile. BOM For the full build you'll need 8x M2: 6mm screws Building Instructions For the bottom part, you will need to print it bottom side…
Simple spiral vase design to be used for candles or plants. The design must be printed in vase mode.
I remixed this model to be longer and slightly wider to act as a crumb collector to sweep up little bits of wire, insulation, filament, or whatever else. Of course I could have just scaled up the original model in those 2 dimensions, but…
I create a Polar watch bike holder witch is 6 degree tilt to compensate for 6 degree handlebar back sweep. It is for 22.5 diameter handlebar. Print Settings Rafts: Doesn't Matter Supports: Yes Resolution: 0,15 Notes: I choose only…
Just a couple of minor improvements over the original. By rotating in slicer to print flat on face, you can make the text face color different from the back for great impact.
A graceful angel with sweeping feathered wings, clasped hands and a flowing gown. Her calm pose makes a striking centrepiece for a Christmas mantel, shelf or peaceful corner of your home. 📏 Size & Colors Print at the supplied size or…
A 90 degree sweep for a Sawstop PCS dust port that accepts a Dustright vacuum fitting. It is designed to fit in the bounds of the ICS mobile base (pictured) so that you can fit most outfeed tables tightly up to the mobile base. It is a…
Wheels for a yard commander lawn sweeper. Print solid.
This is the laziest model I could upload
happy mother's day_ sweeping text
Customized version of https://www.thingiverse.com/thing:3045130 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3045130 Instructions Using the following options: faces_segment = 12 textstring1 = Failure…
You can screw it with 3x16 Woodscrews to the wardrobe or similar I recommen to print it out of PETG. Printed with 0.4 Nozzle and 0.2 Layerheight.
# Roomba e5 Sweeper Upgrade - Printable Replacement Rollers ## Overview This upgrade provides printable replacement rollers (dredges/sweepers) for Roomba vacuums. Designed for Roomba e5 (purchased from Amazon), but adaptable to most…
The Kobalt trim router from Lowes is an oddball size at 65.8mm. As a result my 65mm Sweepy V2 dust shoe from Carbide would not fit properly. Modeled up a replacement and were off to the races. You will need: 2 M3 x 12 SHCS 2 M3 5x4 Heat…
Milwaukee blower sweeper nozzle
I resized the original model so it doesn’t collide with the Z‑axis bed supports. (Note: the bed will still crash at its maximum extension, so remove the mod if you plan to print at full height.) I also added holes for 8×3 mm magnets.…
As always I will promote and REWARD the first people to post quality makes (must enable tips on your profile for reward). A quality make is a successful, complete, hopefully decent looking print at 100% scale. Pictures don't need to show…
A lot of crafts create dust or other mess that needs to be vacuumed or swept up. I wanted an easy way to keep my desk tidy by having an integrated solution that makes clean up quick! It was very important to keep any elements of the…
Our Eufy 11s vacuum needed a sweeper gear. There are a few models already, but they use a different gear pitch with 46 teeth. Ours needed 38 teeth so I designed a new one. I printed with a 0.2 mm nozzle with PLA+. Other nozzles should…
Small name plate for any Ms. Martinez. If you'd like one made under a different name feel free to leave a comment. I personally used tree supports when printing for the floating dot in the letter “I”.
A case with thin walls for the Ferris Sweep. I wanted to make it with a minimal footprint as much as I could.
Instructions I printed my case at .2mm layer height with 15% infill and it works well. Make sure to align the center piece's flat face with the build plate as I have not yet figured out Fusion360 well enough to change this by default. The…
Modular door wind stopper that can be installed with double sided tape like 3M. This was designed for being printed with TPU, but it can be printed with any other material. I've prepared stl files for modules that are 20cm, 15cm, 10cm and…
This is a photo background or photo sweep that can be printed on an Ender 3 in vase mode (or "spiralize" in Cura) flipped on its side. It is 200mm wide and 200mm deep and 120mm high. I designed it to fit for most of my miniature…
Vacuum. Attachment for floor sweeping, no glue needed. Made for easy cleaning as it snap together. Made for small shop vacuum. Life is better when we work together. Thank You PRUSA.
Customized version of https://www.thingiverse.com/thing:3045130 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing\_id=3045130 Instructions Using the following options: faces_segment = 6 textstring1 = \"In God…
for sweeping 2d geometry... Category: Other
![Photographic Sweep Stand [By: HPaul]](https://media.printables.com/media/prints/327328/images/2818357_a8e205bb-ddb1-456e-8c4f-cfcb242d6e39/sweep_setup_preview_featured.jpg)
