2178 modeli
T34-85 USSR tank. The scale is 1:100. Only 2 parts. T-34-85 - the military designation of the latest modification of the Soviet medium tank T-34 with an 85-mm caliber gun. Adopted by the Red Army by GKO Decree No. 5021 of January 23,…
Wydruk około 2,09 €–2,56 € nettoWstępna wycena jednego wariantu
Parts are optimized for ease print.The main body was pre-supported. If you want to make your own supports, a file without them is included. Keep the orientation of the parts as original STL file! The whole model is bolted together with…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
v2 of the mount, very easy and fast to install with 8 large zip ties and 4 pcs M6 x25 screws the Logitech G29 pedal to Playseat challenge seat Also working with Thrustmaster t300 RS Print instructions PETG, print 2 times the G code or 4…
Wydruk około 1,78 €–2,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a mounting bracket for a GL.iNet Beryl AX Wifi 6 GL-MT3000 travel router . I needed a robust mounting bracket for this travel router to mount in our RV. I plan to merge this mount into a larger mounting bracket to hold a POE…
Wydruk około 2,26 €–2,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The issue with the original front mudguard of the ST2, ST3, ST5 and the ST7 (ST2: the new models with 27,5 inch wheels) is that it is a little too short for rainy road conditions. Without extensions, it is easy to get your shoes and pants…
Wydruk około 0,72 €–0,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Introducing the GL-MT3000 Socket Mount! This meticulously designed printable allows you to securely mount your GL-MT3000 router without the need for complicated installations or additional hardware. Crafted with precision and ease-of-use…
Wydruk około 3,04 €–3,72 € nettoWstępna wycena jednego wariantu
The issue with the original front mudguard of the ST2, ST3, ST5 and the ST7 (ST2: the new models with 27,5 inch wheels) is that it is a little too short for rainy road conditions. Without extensions, it is easy to get your shoes and pants…
Wydruk około 0,72 €–0,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I'm running multiple tools and found that the BTT provided cables were unshielded and interfering with each other when rubbing against one another, causing bus communications to freak out. I made new cabling with some LDO FEP cable, but…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
Accessories for the VW T3 camper model. (Universal trailer model for future projects) used screws: M3x20mm (12x) red M3x6mm (3x) blue Keep the orientation of the parts as original STL file. Printer setup: Nozzle diameter 0,4 10% infill…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
The issue with the original front mudguard of the ST2, ST3, ST5 and the ST7 (ST2: the new models with 27,5 inch wheels) is that it is a little too short for rainy road conditions. Without extensions, it is easy to get your shoes and pants…
Wydruk około 0,74 €–0,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Dock for holding the DF500 up, to the MFT3 table aluminium profile. Slide the dock then use 2 T-Nut from the festool@ mft accessories, 2 m5 nuts and 5x20mm bolts to hold the dock to the MFT table rail. The DF500 slides and is held tight…
Wydruk około 8,41 €–10,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
After printing drill the 3,5 mm hole complety through the scrw, then cut of the flange (which is necessary for printing) and shorten to approx. 22mm.
Wydruk około 0,52 €–0,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I created this model to easily hang my Quest 3 and its controllers on the wall or under a shelf. Print "WallMount and WallMountNose" or “UnderShelf” You can use an infill of 15%. It does not need supports. The model is designed to join…
Wydruk około 0,64 €–0,78 € nettoWstępna wycena jednego wariantu
A stand for the Philips OneBlade + Philips NT3650/16 S and its standard accessories.
Wydruk około 4,04 €–4,94 € nettoWstępna wycena jednego wariantu
I created meanwhile a parametric design: Stromer Mudguard Extension V8 - ST2, ST3, ST5 and ST7 The front mudguard of the ST2, ST3, ST5 and the ST7 (ST2: the new models with 27,5 inch wheels) is a little too short for rainy road…
Wydruk około 0,33 €–0,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Tram Keychain Tatra T3. / Klíčenka tramvaje Tatra T3.
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
It has always been impractical that the battery cover of the Stromer ST3 or ST5 does not remain closed when the battery is removed. With this holder, you can now keep the cover closed. And if it's not holding the cover, you can stow it…
Wydruk około 1,02 €–1,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The original solution from STROMER for ST3 and ST5 to mount a smartphone or a GPS looks not very nice. So, I created three different plates to improve the look. With these plates, any mount (Smartphone or GPS) looks nicer. In addition, it…
Wydruk około 1,26 €–1,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a small part for the Festool MFT3. A snapfit holder for the pica-dry pencils. Print it in this orientation:
Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu
Switch Holdesr for T3 dashboard to repair the original dashboard on the back side or to make a modified dashboard
Wydruk około 1,00 €–1,22 € nettoWstępna wycena jednego wariantu
Introduction I recently received a Stedi ST3K 7.5" light bar from my brother, who had ordered the incorrect model for his Tenere motorbike. I designed custom mounts for my 411 Royal Enfield Himalayan to fit the light bar in the space…
Wydruk około 10,19 €–12,45 € nettoWstępna wycena jednego wariantu
This is a simple door shelf divider for a Whirlpool WRT318FZDM fridge. It has a clip-on design and comes in two sizes (112x35mm and 112x50mm). Printing instructions Choose the size you'd like Print as-oriented in the .stl file (writing…
Wydruk około 0,83 €–1,02 € nettoWstępna wycena jednego wariantu
The original part (yes, it is called “ front base tube button side ”) on my wife's ST2 was lost because it obviously didn't hold properly from the start and simply fell out somewhere along the road. That's why it didn't make sense for me…
Wydruk około 0,48 €–0,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Patriot GT30 string trimmer head replacement with minor improvements. I printed it with 100% infill, so unlike the original, it abrades more slowly. For reel supports are necessary, but despite the inequalities, it works well. I printed…
Wydruk około 3,18 €–3,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The cover plate does not fit on the Stromer ST3 Sport stem! To mount the cover plate on the Stromer ST3 Comfort stem, use the original screws.
Wydruk około 1,53 €–1,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you are a fan of Stromer e-bikes (ST3 or ST5) and want to show that on your Lindr beertap. The model in the 3mf files are for Prusa Slicer project. They have settings to get a fuzzy surface, except where the ST3 or ST5 logo is. It is…
Wydruk około 2,65 €–3,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Just a scaled up version of RT3D 's Magigoo holder so it can hold a bottle of Layerneer Bed Weld . I just used some slightly bigger screws I had laying around. Printed in PLA. I think both products are excellent - make sure to go and…
Wydruk około 2,82 €–3,44 € nettoWstępna wycena jednego wariantu
The cover plate does not fit on the STROMER ST3 Sport stem! To mount the cover plate on the STROMER ST3 Comfort stem, use the original screws. You need the following material to assemble the plate and the body. 5 x M3 nut 1 x M3 40 mm…
Wydruk około 1,57 €–1,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The model is designed to mount an original Garmin Oregon Bike Mount on a STROMER ST3 or ST5. It uses the provided stem cover and fits on both stems (Sport and Comfort). The connector parts are not necessary, but they prevent a rotation on…
Wydruk około 0,46 €–0,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print two of these. These are to be used with Belkin RT3200 installed upside down, suggest using double-sided 3M tape.
Wydruk około 1,88 €–2,30 € nettoWstępna wycena jednego wariantu
Tool holder insert MT3 (Morse Taper 3) This is a printable insert for 35mm (1-3/8") square mild steel tubing. When it comes to heavy tools, a tool holder made of steel is a great option. I've made this insert so that You can click into…
Wydruk około 1,51 €–1,85 € nettoWstępna wycena jednego wariantu
The default model is 2mm thick and arround 40cm. It was abviously to large for my ender3 so i split it in the middle. They are the two midle part in the files. You can fix them together with glue. You can scale the parts as you want but…
**Update V2 in much higher detail. **I guess you can cut it with the new slicer by your own. Porsche GT3 RS detailed silhouette. Easy to print for up to 80cm length (4 parts) on Prusa MK3/4 bed size. Of course you can scale it the size…
Tiny Soviet Tank – T34 1:200 scale model Easy to assemble – the turret clicks onto the hull and can rotate. Just glue the tracks and back part to the main body. Comes in two versions: T34/76 T34/85 To scale a model from 1:200 to 1:144,…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
INTRODUCTION This is a Addon for Blender that allows you to create Miniature Maps of your adventures from just the GPX file that you can download from Komoot, strava, garmin or other tracking apps! No blender knowledge required SUPPORT MY…
Hello Guys, It's been a while...I've done this project couple of weeks ago, but wanted to create an youtube video on haw to build it, but still didn't got the time. Anyway, I'm publishing it and will add the assembly video and the…
Various designs for XT30 connectors Here you will find my designs for the XT60 size and MR30-M . News 12.03.25 Step files available 22.11.23 added design of angled and round mounting bracket 02.11.23 added design of standard mounting…
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
This is a 1/20th scale T34 tank, a rolling model. Tried to make it look like the late model t34-85 versions. I was not trying to create a historically correct model, just a model that would be reasonably fun to put together, look decent,…
A purpose build XT30 2+2 plug designed for the 🥰 BTT SB2209 / SB2240 toolhead boards. Built with a minimal footprint to keep your cable routing clean and uncluttered. Companion Model: Use the Cable Bridge PLUS to form a sleek and ultra…
That's a case for the famous LILYGO T3 LoRa device, with room for a standard 3.6v LiPo battery. No screws needed, you can just print it and close it with the device inside. No supports required. PETG is better but PLA also works well.
Check out our Discord for wiring diagrams and resources on how to build these DIY Sim Racing Steering Wheels! www.discord.gg/turnracing This digital download is built as a sim racing design. After purchase you will be able to download the…
Inspiration : metalx Origin : https://www.etsy.com/fr/listing/1648394164 | Build Part \/
-Two colors -organic support -0.15 layer height
Si jamais vous voulez que je fasse d'autre modèle qui vous plaise à n'hésiter pas à m'écrire pour que je fasse la voiture que vous voulez
Requires two screws, 6-32 or M3.5 any length between 8mm and 30mm. Second version, 3 parts with 5mm in the title, Fits M5 screw 8mm+ in length. Uses the same clip. Removable stand, can be doubled up for a kickstand or used single for the…
1:18 scale EC 135 electric r/c helicopter Build thread on RC Groups https://www.rcgroups.com/forums/showthread.php?3835813-EC135-Scratch-Build Note that this is a work in progress - comments welcome! Modified on 31/07/21 to update stl…
Files for the XT30, XT60 and XT90 are now here…. EDIT: 8/10/22 Created the parts with raised letters. Mark them with a felt pen to make them easy to stand out. I got tired of fighting to keep the plug and wires in place while soldering…
Ich bin sehr großer Porsche Fan, und habe zum 24h / 2024 am Nürburgring einen Porsche 911 (992) GT3 2024 erstellt. Ich wünsche Euch viel Spaß und bin auf Eure Makes gespannt. Update Version: Ich habe die Felgen vom Modell getrennt. So das…
Edit 3/12/23 0800. I think I finally got to a version that prints without a bunch of weird settings and crazy supports. This is a screen case for the BTT TFT35 SPI V2.1 that BigtreeTech introduced for their CB1, Raspberry Pi alternative.…
Hi Internet Sim Racers, After doing a final test print of my Thrustmaster Txxx 70mm hub adaptor kit... I feel it's ready for public thrashing. Ok, so whats in the pack I hear you ask... through some form of audio bug I have in your…
TTGO Lora32 T3 Slimline Case This case fits both 433mhz and 868mhz versions of the boards marked T3_V1.6.1. I have both running on the home IOT. I've included a picture of the boards I have as there are a confusing amount of different…
GT-R DIY Steering Wheel PERSONAL USE LICENSE ONLY Files are for personal use only, non-commercial and not for resale Copyright by KODAI Racing Wheel Features 300mm Diameter x14 Pushbuttons x2 Optional Rotaries x2 Magnetic Paddle Shifters…
English version, German version below Description: Pictures are a wonderful way to fill empty walls. However, one can quickly get tired of looking at the same picture, not knowing exactly what to hang on the wall, or not wanting to invest…
Descrizione Porta stile e passione automobilistica nella tua casa con questa elegante wall art della Porsche 911 GT3 , realizzata in stampa 3D con PLA nero di alta qualità . Il design minimal e moderno raffigura il frontale iconico della…
EZ to Grip XT60 and XT30 Caps to cap, cover, and tag your batteries especially when you travel. Printed in PLA UPDATE: 2 Versions - TPU VERSION - adjusted for a snug fit! Resolution: 2 Walls/Perimeters - 3 or 4 top/bottom - .28 Layer Height
This is a Pivoting Display Mount for the BTT TFT35-SPI V2.1 The pivot assembly is spring tensioned to apply friction to the mechanism. I have repurposed an old bed levelling spring for this. A reasonably sturdy spring with a minimum ID of…
Summary A phone holder for the Thrustmaster T300 (RS) wheel. Currently fitting my iPhone 12 very well, but similar phones might also work. Very nice in combination with the Simhub Dash to show some metrics during sim racing. Printing…
Porsche GT3 Cup edition Easy to print . Of course you can scale it the size you want. Easy to print for up to 110cm length, just cut it in some parts with the new slicer. I recomend a strength of about 2-3mm. Add some double-sided tape…
Capture the thrilling world of GT3 racing with this 3D printable STL model of the Mercedes-Benz AMG GT3 Evo. This powerful GT3 racing car model is perfect for motorsport enthusiasts and sim racers looking to display the aerodynamic…
The CheaPad : the most affordable DIY Klipper Pad ! Let me introduce The CheaPad, an incredibly cost-efficient alternative to all the Klipper pads out there! 🚀 I'm excited to share this minimalist yet highly functional solution for 3D…
Due to the large number of files, they are archived in zip format to preserve folder structure. Notes, Fixes, and things I forgot to include in this release. I forgot to include the decorative cab plating in the ScoutXL files. Please use…
Edited 10/5/24: QUEST 3 VERSION AVAILABLE Cool new Features! Made this grip Quest 3/Quest 3S compatible (Grip LED, Geometry Changes) Added a belt hanger assembly Added a knuckle strap battery door Added a knuckle strap Backwards…
you will need buttons ,carbon plate (can be printed) and an arduino -------------------------------------------------------------------------------- carbon plate from where ever or print it. i used an arduino nano but you can use…
I designed a series of honeycomb-style keychains featuring various car brand logos. Each keychain combines a lightweight and modern honeycomb pattern with the distinctive emblem of the chosen car brand. The design is both stylish and…
Main features: Half length dart blaster K25/K26 spring powered Real steel-esque proportions Sturdy design with heat set inserts, M3x500mm threaded rods Straight forward assembly Spring-loaded prime return (if desired) Easy to print parts,…
Porsche GT3 RS, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better…
Print in upright position, no supports needed. Holes are designed slightly undersized so before assembly, drill through holes with 4mm drill. Designed for M4x30 bolt and M4 nut. 1/8 inch imperial hardware should work as well.
User Smuk3d asked me if i could create a version of the TFT35 Voron 0.2 housing that moved the viewable area of the screen to center, and allowed for a more symmetrical bezel. It was alot of work and required a 90ish percent redesign of…
Replacement Linear Bearings for 8mm rods of Prusa printers Minimal friction surface Clean outside, no grooves or logos Print time: 39 minutes No support 0% infill The 3D Models found online where pretty low-poly and had other features I…
I made this small XT30 panel mount adapter as I need one to mod my Bambu. To install the connector inside the adapter you'll perhaps have to file a bit the connector to fit it, but for sure it won't move. I strongly advise to print the…
This is a 3d printable Magazines for the Tikka T3X Tac A1, CTR and Arctic rifles. Included are models for a 5 rnd and a 10 rnd version (with the 5 round variant being the more practical choice) which are a dircet replacement for…
Easy to print . Easy to print in 2 parts, as uploaded in the .3mf. Of cource you can scale it the size you want. I recomend a strength of about 2-4mm. Add some double-sided tape and stick it on the wall. Invisible and easy to remove. If…
This is a stand for Quest 3 controller. It can be used either front to back or left to right.
This project includes over 100 .STL files, the entire assembly .STEP file, Grip & Molding files, a DIY guide and more! You can get all the files from this public Google Drive link:…
Porsche 911 GT3 – Flat Minimalist 3D Model This 3D model is a flat, minimalist silhouette of the rear view of the Porsche 911 GT3 , designed as a decorative piece. The model presents a stylized rear perspective of the iconic car,…
Support pour fixer une case WILD MAN sur trottinette Segway ZT3pro 3 vis M5x25 inox 3 rondelles M5x12 inox Remplissage à 100/100 Matière utilisé ASA, après libre à vous d'en utiliser un autre.
Most XT30 housings on Printables are designed for bulky RC/drone battery leads, typically using 14–16 AWG silicone wire for relatively high-current RC/drone applications. I needed a connector housing for a much thinner cable — an aquarium…
Remix of XT60 Plug Housings resized to fit TX30. I printed it in TPU and the fit was really snug, non-flex materials might need ~1% upscalling.
A better way to attach your t300 wheel and you can skip the annoying screw.
Quick heads up: These remix designs were somewhat “intended” for the case being positioned on the X-max end (right side) of the LR3 gantry. If you are planning for placing it on the X-min (left side), then the only concern with simply…
I recently put klipper on my ender 5 pro and wanted the same user experience on my ender 3 pro. Ordered the bigtreetech manta E3EZ board with cb1 and a TFT35 SPI V2.1 screen. There was no housing for the screen available at the moment so…
This is a screen case for the BTT TFT35 SPI V2.1 that BigtreeTech introduced for their CB1, Raspberry Pi alternative. The CB1 has the drivers for this display built-in. The Screen sits a couple millimeters below the level of the housing…
Good box for the Jackpot3, fits the LowRider 4 CNC, and others. Easily organize your wires while the built-in cooling system keeps convection pulling the heat out. Hot climates should use an optional fan (typically wired into the board…
Using a variety of tools i repaired the file by tRubbelMaker for printing as a solid body. Some errors remain on the left door, but i'm unable to fix these. Print Settings Printer: Prusa I3 Mk3 Rafts: Yes Supports: Yes Resolution: 0.2…
Just after I made the GoPro-mount for my TP-Link TL-WR902 travel router , I decided to upgrade to the Beryl AX. As I use a GoPro-mount for mounting the router at a certain occasion, I had to make a suitable clip for the new router. I…
printed with ankermake m5 in normal mode, 50% infill, support
This LCD cover is to fit the Big Tree Tech TFT35 V3.0 on a MK3/S Bear frame. In this design the supports are held in by 4) 3mm x 8 screws, which also hold the board in the cover. Trying to think of a better way because there isn't much…
This mount allows you to install the awesome case made by JimbalNy. ( https://www.thingiverse.com/thing:4153427 ) I installed it on my Ender 5 Plus, but it should work on the CR 10S PRO V1 or V2. It uses the same bolts mentioned. If you…
A case for the WT32-ETH01 with a USB Type C trigger board for power. The top snaps into the body, no screw needed here. Also needed: 5 V USB Type C Trigger board, female, e.g. https://www.aliexpress.com/item/1005005995374256.html jumper…
Porsche 911 Gt3 rs 992 wall art Silhouette
…Please be sure to hit like & post a make, I'd love to see your prints! Print standard VORON settings, no supports required!…
Silhouette della mitica Porsche 911 Gt3. Consiglio di stamparlo in PLA nero per un maggior effetto a muro. Ho inserito anche due file gcode ridimensionati al massimo della superficie stampabile della Presa mini.
Print with 0.1mm layer height for the best snap fit. No supports needed.
The model is easily scalable, which allows you to split it into as many parts as you can fit on your printer or scale it super small and put it on your keychain! I found that the layer height and infill don’t really matter as the model is…
Disclaimer: I used BTT's CAD model and the Voron 0.2 CAD models for dimensions. I don't own a Voron 0.2 or a TFT35, but Printables member Eric Ebert, who assisted with many of the features of this design Printed and test fitted a couple…
Porsche 911 GT3 RS Wall Art Silhouette model with a Manthey inspired Bodykit for increased aero and performance.Adjustable size. I accept model suggestions. If you enjoy my work, you can support me with a small contribution ☕ It really…
![Simracing Button Box [porsche 911 gt3 replica]](https://media.printables.com/media/prints/740083/images/5780709_440878bd-1c6d-4dd5-a7f3-632794dee293_5b222251-554e-4a29-be72-d9e042c4c447/capture.png)
