Wyniki wyszukiwania: tama

Sortowanie

458 modeli

P
PrintablesGekoPrime

Pastamatic - Filament Spool Winder for Bambu Lab X1C/P1P AMS (level winder with self reversing leadscrew)

I tried another spool winder but found it finicky and delicate. I designed this winder from scratch to be simple and robust, using the same self reversing leadscrew mechanism found on industrial cable winders Why pick this model: Prints…

Pobrania
72 883
Polubienia
11 263
Ocena
4,85
P
PrintablesKYZ Design

PASTA lite Receiver - a Pastamatic Remix

Compatibility Use v1.0 or v1.0A1M receiver: As a stand-alone unit in conjunction with another stand-alone spool roller/stand/holder OR with Donor Spool Roller v0.3 or newer OR with Donor Spool Spinner v0.5 or newer v0.5 and later receiver…

Pobrania
4862
Polubienia
648
Ocena
4,79
P
Printablesschiko

Retention Clip for Pastamatic Spool Winder (Driven Spindle)

I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Similar to GekoPrime's Clip for the other places. But this…

Pobrania
3492
Polubienia
291
Ocena
4,98
P
PrintablesGekoPrime
Pobrania
2933
Polubienia
249
Ocena
4,97
P

RC Boat Catamaran FOSS test part

The largest part of the ship is used to test whether your printer can print the entire model. Printing takes more than 30 hours and it is necessary to place suitable supports in it. This is the biggest (test part) of FOSS which is…

Pobrania
2460
Polubienia
251
Ocena
5
P
Printablesmendieselnco

Pastamatic - 37 mm motor mount remix

Created an enclosure for the 37mm motor mount used in GekoPrime's original motor mount remix. Added mounts for a DC controller and 12v power supply. Parts list: 37mm motor -…

Pobrania
2382
Polubienia
190
Ocena
4,82
P
PrintablesBlargedy

Pastamatic Filament Spool Winder Modifications: Braces and 5kg Spool Support

Pastamatic Filament Spool Winder Modifications Changelog: 2024-02-23 Added options for huge spools and small spool with spacers. Thanks to Ch3vr0n for the idea and testing of the spool spacers Modifications to GekoPrime's winder to better…

Pobrania
2378
Polubienia
260
Ocena
4,89
P
PrintablesGekoPrime

Pastamatic - 37 mm motor mount

This is an barely tested mockup, it seems to work fine but I haven’t run a full spool through it Here’s a link to the motor. I used 8mm m3 screws. https://www.amazon.com/Greartisan-Electric-Reduction-Centric-Diameter/dp/B08D3SSG55/ I…

Pobrania
1920
Polubienia
206
Ocena
4,8
P
PrintablesDMM_Raptor_Dude

Pastamatic .3mf Including Several Remixes

I wanted a 3 color Pastamatic with Bambu colors to compliment my Bambu Lab Colored toolbox with AMS lid. Decided on Black Frames, Grey Parts, and Bambu Green spindle clips for accents. File is on 4 seperate plates. Took considerable time…

Pobrania
1770
Polubienia
152
Ocena
4,91
P
PrintablesNicholas Kenyon

Pastamatic - Filament Spool Winder for Bambu Lab X1C/P1P AMS (level winder with self reversing leadscrew)

The original Pastamatic would sometimes jump the lead screw out. The author did a remix to incorporate a brace into the side rail. This is for anyone who printed the rail without the brace. It will use all existing mount points and…

Pobrania
1746
Polubienia
222
Ocena
5
P
PrintablesBTR3D
Pobrania
1113
Polubienia
107
Ocena
5
P
PrintablesdE3OB2

Hand Crank for the Pastamatic

Hand Crank for the Pastamatic Manual crank for the Pastamatic Filament Spool Winder Pastamatic - Filament Spool Winder Bambu Lab X1C/P1P AMS link: https://www.printables.com/model/466883-pastamatic-filament-spool-winder-for-bambu-lab-x1c…

Pobrania
1104
Polubienia
96
Ocena
4,9
P
Printablesuhltimate

Balloon Boat Catamaran - Easy Inflate

Step into the world of high-stakes adventure with my 3D printed Balloon-Powered Boat - a vessel that not only boasts a sleek design straight out of a James Bond movie but also features an easy inflate function for instant action on the…

Pobrania
1050
Polubienia
138
Ocena
5
P
Printables3Dlife

Short source cradle for Pastamatic - Filament Spool Winder

The shortened source cradle positions the source spool at a similar distance from the lead screw as the target spool. It's suitable when both spools are of similar size, minimizing space requirements.

Pobrania
958
Polubienia
125
Ocena
4,67
P
PrintablesTritschi

Remodel of Pastamatic - Filament Spool Winder for Bambu Lab and Others

EDIT 02-Sep-2025 : New revised motorized and furthermore engineered version published: https://www.printables.com/model/1398207-re-remodel-of-pastamatic-filament-spool-winder-for EDIT 20-Aug-2025: in a couple of days there will be a new…

Pobrania
899
Polubienia
213
Ocena
0
P
PrintablesGekoPrime

Pastamatic - shim to allow the use of spools with 70mm ID

To do: Change spool_max_ID in the main project so this shim isn’t required

Pobrania
827
Polubienia
77
Ocena
5
P
Printablesschiko

Clamp for Pastamatic Spool Winder (to fix on a board)

I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … You need 4 of them and a wood board (mine will be…

Pobrania
800
Polubienia
92
Ocena
5
P
Printablesstayzeef

SeaRescue Catamaran - Versatile 3D-Printed RC Boat

SeaRescue Catamaran – 3D-Printed RC Boat (Mostly Functional, Occasionally Janky) What You’ll Need (V1 - Above-Water Propulsion): Motor: A2212 brushless motor (other sizes might fit too) Servo: 9-gram servo for steering Prop: 8045 or 8060…

Pobrania
798
Polubienia
103
Ocena
5
P
PrintablesTritschi

Remodel of Pastamatic - Filament Spool Winder for Bambu Lab and Others

Edit 15-Sep-2025: A maker notified me that I posted the wrong motor, he was right. I am sorry for that. I corrected the right motor in the following description. It must be a ø8mm shaft with flat area, so-called D-type. Sorry for any…

Pobrania
776
Polubienia
259
Ocena
5
P
PrintablesTom Cichowicz

Pastamatic - 37 mm motor mount (enclosure)

Speed Control DC Motor Speed Controller PWM 1.8v 3v 5v 6v 12v 2A 30W Adjustable Driver Switch 1803BK 1803B NEW Drive Gear The NEW drive gear that has a closer tolerance for a press or tighter fit to the motor shaft. Spindle retainer…

Pobrania
770
Polubienia
93
Ocena
4,5
P
PrintablesMalinaPl

(non) Rc Sailing Catamaran model Wave 58 "Sta Ana"

All informations are included in "manual" pdf BOM: 5mm carbon or glass fibre rod 4mm carbon or glass fibre rod a lot of m3 screws and nuts m3 inserts copper wire 05, 1 and 2 mm diameter and solder sailcloth How I Designed This Category:…

Pobrania
767
Polubienia
140
Ocena
5
P
PrintablesCerialPhreak

Pastamatic PETG wiper blades

Bendy PETG wiper blades for Pastamatic

Pobrania
756
Polubienia
80
Ocena
5
P
Printablesmaxelman

Pastamatic Manual Hand Crank / Handle

Print in place rotating handle allows a tight grip, it rotates in your hand.

Pobrania
754
Polubienia
50
Ocena
5
P
PrintablesMWinkel

Adapter rings for Pastamatic Spool Winder (83mm ID)

Adapter rings that allow the use of spools with up to 83 mm inner diameter [Pastamatic - Filament Spool Winder for Bambu Lab X1C/P1P AMS]

Pobrania
710
Polubienia
71
Ocena
4,86
P
PrintablesNeil J Borja

Pastamatic Extra Clearance Wiper Mounts

This set of wiper mounts for the Pastamatic Spool Winder has .25mm extra clearance for easier insertion/removal of the TPU wiper blades. It can also help compensate for any warp or flaws in the holder or wiper prints that prevent the…

Pobrania
668
Polubienia
86
Ocena
4,92
P
PrintablesSome_Guy

Musubi Press (SPAM, egg/tamago, etc...)

This is a basic musubi press that I modeled up to become better at FreeCAD and to make some musubi. I've included both printable stl files and the original FreeCAD files if you want to make some modifications to the press. The Kanji for…

Pobrania
623
Polubienia
54
Ocena
5
P
Printableslimkang

Balloon Boat - Catamaran

I designed and made this for our godson. Place blown up balloon on top chimney and watch it go. Makes for a nice bath toy even if you don't use the balloon propulsion NB: photos and video are of the old version. The uploaded model is new…

Pobrania
599
Polubienia
47
Ocena
5
P
PrintablesFilip Zítko

Auxetic structure | Metamaterial

Prototype of Auxetic metamaterial which I made to demonstrate how auxetic metamaterials work. The rectangle sample works well, but the star sample needs to be printed from flexible material. Auxetic material If you pull on the auxetic…

Pobrania
578
Polubienia
24
Ocena
0
P
Printableslanggore

pastamatic leadscrew with added bearing

had issues with the leadscrew binding so i added a place to add an extra bearing

Pobrania
570
Polubienia
41
Ocena
4,43
P
Printablesjosete79

Playmobil tamaño XL

Playmobil tamaño grande, se puede mover brazos, manos, cabeza y sentarse, para imprimir en 7 piezas.

Pobrania
533
Polubienia
53
Ocena
4,5
P
PrintablesUWcharlie1983

Catamaran Balloon Boat

My son loved the Balloon Boat designed by K-eye, but I wanted to make it faster and more stable. This lead to the idea to modify it into a Catamaran. Two hulls leads to increased stability and two balloons means twice the power! This can…

Pobrania
529
Polubienia
67
Ocena
5
P
Printableskevinclark

Extended donor spindle for Pastamatic Winder

The Pastamatic Winder is great, but the donor spindle wasn't long enough to attach 2kg Polymaker spools. This model extends the donor spindle 1.75" to accommodate wider spools.

Pobrania
513
Polubienia
43
Ocena
5
P
PrintablesBoardTo

Gudetama KeyCap

My kids asked if any Gudetama KeyCaps were available, unfortunaltely not. So remixed some existing models to create one for them, so thought i would share my first attempt

Pobrania
507
Polubienia
122
Ocena
5
P
PrintablesYardboy

TPU Wiper for Pastamatic

We could not get the TPU wiper to slide into the slot more than half an inch. Shaved a bit off the bottom bulb diameter, now slides in snugly.

Pobrania
485
Polubienia
39
Ocena
5
P
PrintablesLizzB

Pastamatic with Manual Crank

Added a crank handle to the driven male spindle as I don't own a drill. While it takes longer than 2 minutes to wind, it works. Requires supports in the gap where the spindle meets handle Crank handle was taken from…

Pobrania
459
Polubienia
87
Ocena
4,75
P
Printablescolld

Tamagotchi stand

Tamagotchi stand for all models

Pobrania
451
Polubienia
61
Ocena
5
P
PrintablesBladan83

Disk for Philips Pastamaker customizable

I design this disk for philips pastamatic, i try with PLA but bad result, the pressure is too high. you can try with nylon or ABS or you can use this model to make a mold. NOW you can customize easily with the original draw fusion 360 file!

Pobrania
434
Polubienia
25
Ocena
4
P
PrintablesMetti

PHILIPS Pastamaker cookie disc (Keks Matrize für Spritzgebäck)

Since the PHILIPS Pastamaker is a great food extruder, I wanted to make my cookies with it. Sadly there was no original cookie disc in my area available, so I decided to design my own. It's printed in PET-G, so at least the material is…

Pobrania
433
Polubienia
36
Ocena
5
P
Printablesvikingbrent

Leadscrew pin retainer for Pastamatic

I was having an issue with the leadscrew pin vibrating out of place within the leadscrew block on my Pastamatic machine. This bracket keeps the pin in place within the block and slips easily out of the way in case you need to get to the…

Pobrania
428
Polubienia
36
Ocena
5
P
PrintablesRon McDavid

Pastamatic Stabilizer Bracket

These simple brackets allow side rails to be screwed down in a permanent position. Printed with PLA, I used 50% infill for addition strength. I just glued to side rails. but they could be bolted to rails. I added four, one in each corner.

Pobrania
424
Polubienia
54
Ocena
5
P
Printablesm0larMechanic

Pastamatic Pins with Cotter Pins

These cotter pins were a came changer for me. I was having pin vibrating out while in use before. Now they are locked in! Edit: Made a long pin with the hole moved closer to the tip if you wanted to use the clip mod for the drive spindle.

Pobrania
417
Polubienia
64
Ocena
4,89
P
PrintablesHextra

Tamashii: Chronicle of Ascend + expansions insert (Gamefound Box)

Tamashii: Chronicle of Ascend is an Awaken Realms Lite game with a cyberpunk aesthetic and scenario-driven play sessions. Wanting to keep all the content together in the smallest space possible, I've created an insert that gathers the…

Pobrania
414
Polubienia
41
Ocena
5

copa del munto tamaño real

copa del mundo fifa tamaño real (AMS)

Pobrania
390
Polubienia
36
Ocena
4
P
Printablesbapski

Pastamatic - Filament Spool Winder with screws for more stability.

also got this idea from https://www.printables.com/@Leo_1098206. i however don't have or can't find a 2.5kg spool which his what his particular remix is for. 5mm countersunk screws should fit fine.

Pobrania
389
Polubienia
33
Ocena
4,67
P
Printablespingu

Pastamatic Leadscrews for 60mm and 80 mm Spools (e.g. Filament PM, Prusament, Prusa, Redline Filament)

60 mm (tested): Prusament spools (perfect winding) e3d Edge spools (3dbuddy seems to have identical spools, untested) ok-ish thinner Spools do not work perfect. they get out of anlinghment (see my post in the coment section) 80mm Spools…

Pobrania
381
Polubienia
35
Ocena
5
P
PrintablesthoperSought

easy hand crank for Pastamatic

hand crank for pastamatic a spool of bambu filament got away from my sister, and now needs to be respooled. she wanted a hand crank, so I designed this one. in particular, I wanted it to be easy to print and not require any extra hardware…

Pobrania
377
Polubienia
49
Ocena
4,67
P
PrintablesROLS733

30mm Spacer for Pastamatic Filament Spool Winder Spindle

for slim spools like the old Makerbot spools.

Pobrania
353
Polubienia
39
Ocena
5
P
Printablesvvzvlad

Alternative spool holder for Pastamatic

The "x2" in the file name refers to the number of printed parts. Depending on whether the coil is receiving or giving coil, you have to insert the corresponding adapter (with or without teeth), and glue it in (I use super glue for gluing…

Pobrania
353
Polubienia
33
Ocena
5
P
PrintablesBG5UTE

Pastamatic axle holder

有效防止使用双电机MOD时,卷线时的跳轴的现象 机翻:Effectively prevent gear runout during operation when used the dual motor mod Hardware: 1X 608ZZbearing 1X M5X35Scerw and nut 2x M6X50Scerw

Pobrania
348
Polubienia
42
Ocena
5
P
PrintablesNindrene

Pastamatic Remix with 1kg and 5kg Spool Holders

Alright I took the existing models and put them onto separate plates. Some of the bases are thicc so they need their own plates. Nothing “needs” a brim and probably prints best without them. I put this all together on my Bambu X1C (Fancy…

Pobrania
345
Polubienia
24
Ocena
5

tamagotchi case for apple watch 44mm

Here is the Tamagotchi case for Apple Watch 44mm, please scale it for easy assembly (I scaled 102.5% for my watch.) I used 5mm diameter, 2mm height neodium magnets inside. Hope you like it!

Pobrania
341
Polubienia
49
Ocena
0
P
PrintablesWoodenspoke

Pastamatic Axle Brake- no TPU no Blocks- To transfer filament from one roll to another.

I really did not want to print the TPU just because I am an ABS person all the way. I found clips to hold down the spool axles on the Pastamatic but no one used them to slow down the filament spools as a brake. I tried rubber pads on the…

Pobrania
337
Polubienia
21
Ocena
4,75
P
Printableswilly.is.making

Pastamatic Notched Pins and C-Clips

These remixed pins have a notch so you can secure them in place with a C-clip. Be sure to install them with the flat portion of the clip against the flat side of the pin. Variations There are 2 variations of the short pin. One directly…

Pobrania
332
Polubienia
35
Ocena
4,86
P
PrintablesTom Cichowicz

Pastamatic Filament Winder - Flush Pins

Modified Pins - Long & Short with a cap to be glued as a permanent install. Pin can be cut off (for replacement) Used - Gorilla Glue - (clear)

Pobrania
330
Polubienia
57
Ocena
0
P
PrintablesJan B

Sunlu spool adapter for Pastamatic donor spindle

This adapter is for the ORIGINAL donor spindle of the pastamatic. It accomodates 72mm center bore spools as pictured (mainly older Sunlu spools).

Pobrania
326
Polubienia
22
Ocena
4
P
PrintablesTeo_211

rubber powered jet catamaran toy

this is an easy to make catamaran that floats and moves thanks to a rubber band that moves a propeller. it is printed in pla and, although it needs some supports for the floats, it doesnt take too much time

Pobrania
325
Polubienia
61
Ocena
5
P
PrintablesLWC

LWC Meshtastic "TAMAMESHI" portable Faketec Node

UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…

Pobrania
319
Polubienia
71
Ocena
5

Multiple Size Perfect First Layer Bed levelingTest | Prueba de Nivelación de Cama para Primera Capa Perfecta de multiples tamaños

Español: Modelo STL para verificar nivelación de cama de impresión de varios tamaños. Inglés: Multiple size STL model to check print bed leveling.

Pobrania
315
Polubienia
5
Ocena
5
P
PrintablesTom Cichowicz

Pastamatic - Reinforced Main Drive Spindle

Reinforced Main Drive Spindle - just as the description states. I had my original split right in the area - that I reinforced. I probably shouldn't have tightened it so much.

Pobrania
299
Polubienia
31
Ocena
5
P
PrintablesPhilip Brady

Pastamatic Retention Clip Set

This is a remix of fellow Phil's excellent Pastamatic retention pin available here: https://www.printables.com/model/100. , to combine with the original Pastamatic, available here:…

Pobrania
297
Polubienia
30
Ocena
5
P
PrintablesZiemniaczenka

Nama Tama - the finals

Nama Tama from game The Finals. If you want to print in multicolour, you need to paint faces in slicer

Pobrania
296
Polubienia
21
Ocena
5
P
PrintablesJan B

Pastamatic Leadscrew and winder spindle for 50mm wide Sunlu spools

This is a replacement leadscrew and winder spindle for the fantastic Pastamatic. It fits the refillable Sunlu spools with a width of 50mm and a center bore of 62.7mm. Tested, works.

Pobrania
294
Polubienia
31
Ocena
4,25
P
PrintablesKistek

Pastamatic Spindle Retention by Kistek

Pastamatic Filament Spool Winder Add-On by Kistek. This add-on is for Pastamatic filament spool winders and is meant to secure the drive spindle so that it does not come out of the cradle during operation. This is especially important for…

Pobrania
294
Polubienia
43
Ocena
4,5
P
Printablestransformat

Catamaran Sailboat Water Toy

Turn Your Pool Into a Sail Regatta Course A functional, miniature catamaran sailboat as a water toy or desk display. Summer fun for children and adults or a nice gift for sailing fans. rotatable sail 17 cm / 6,7 in long (scalable) ~ 2 h…

Pobrania
290
Polubienia
136
Ocena
5
P
PrintablesSiff3D

Pastamatic Driving Shaft - Reinforced

The original driving shaft broke in the middle of the screw part. I printed it in PETG according to the instructions, but apparently the walls are too thin. So, I created a remix, which has a reinforced screw and the "top" end of the…

Pobrania
290
Polubienia
28
Ocena
5
P

Plato para regar maceta (Altas velocidades) diferentes tamaños

un plato para regar cualquier tipo de planta simpre que quepa y se puede hacer a altas velocidades.

Pobrania
287
Polubienia
20
Ocena
5
P
PrintablesTurtleCreations

Leadscrew 45 mm for Pastamatic

Leadscrew with shorter travel to wind smaller 750-gram spools like the ones from FormFutura, Ultimaker, and others.

Pobrania
283
Polubienia
34
Ocena
5
P
Printablesvvzvlad

JGY370 motor Pastamatic

You'll need: 1)Motor+controller (12V/375rpm and package C): https://aliexpress.ru/item/1005002607864635.html For russian region:…

Pobrania
280
Polubienia
54
Ocena
4
P
PrintablesDsk001

One Punch Man - Saitama Mini Dude

Thanks to Wekster who inspired in making this mini dudes based on his design. This is Saitama aka Caped Baldy aka One Punch Man Here to be your hero for fun Support me on Patreon: Print instructions If you are making your own gcode you…

Pobrania
277
Polubienia
27
Ocena
5
P
PrintablesPeter Farell

Nativity : Tamales

Nativity: Tamales and Empanadas In many Latin American countries, nativity scenes often feature food items as part of their festive displays. This tradition is a delightful way to combine faith and culture with delicious treats! Here are…

Pobrania
276
Polubienia
43
Ocena
0
P
PrintablesAlberta3D

Tamagotchi Bed

Simple as it sounds, just a basic bed. So your Tamagotchi isn't just rolling around on the Night stand. Easy Print, no supports.

Pobrania
273
Polubienia
34
Ocena
5
P
PrintablesBoaz Te Ronde

Sailing Catamaran

I designed this model as a desktop model.

Pobrania
264
Polubienia
10
Ocena
0
P
PrintablesChris Turnbull

2020 Crossbar Remix for Pastamatic Filament Spool Winder

Crossbar Remix for Pastamatic Filament Spool Winder with mounts for 2020 extruded aluminum. printed on x1c with 0.4 nozzle in overture Space Grey PETG .20mm std profile with the following changes: .20mmm layer height 4 wall loops 4 top…

Pobrania
263
Polubienia
26
Ocena
3
P
Printableskevman

Pastamatic dual motor mod

My single motor just didn't have enough torque when the spool was more than halfway loaded so I remixed this setup for my controller and a dual motor setup. EDIT:added step files EDIT: Use this as well…

Pobrania
241
Polubienia
53
Ocena
5
P
PrintablesJangy

Gigantamax Gengar in a Swamp (Pokemon) キョダイマックス ゲンガー

Gengar Gigantamax in a Swamp (Pokemon) キョダイマックス ゲンガー MMU Multi colour part design Category: Sculptures

Pobrania
235
Polubienia
67
Ocena
0
P
PrintablesPointAndPrint

Tamagotchi Connection Stand / Dock

Enjoying the rerelease of the Tamagotchi Connection? Or do you have a classic one? Either way: with this Tamagotchi Connection Stand, you have a place on your desk for your Tama so you can always keep an eye on the little critter.…

Pobrania
230
Polubienia
39
Ocena
5
P
Printableskevman

Pastamatic winder power motor remixed for different controller

Remixed the enclosure for a different motor controller https://www.amazon.com/gp/product/B071H2YQG5/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Pobrania
229
Polubienia
33
Ocena
4
P
PrintablesSascha

Erhöhung/Riser for Pastamatic - Filament Spool Winder

Erhöhung um 20mm um DasFilament Spulen mit 2,6KG zu verwenden

Pobrania
228
Polubienia
35
Ocena
5
P
PrintablesNoHumanzA

Tamagotchi Meets Build 01

I've been working on making 3D models of every Tamagotchi case to come out. This is my first one. I plan on improving it or maybe someone else will. This is just what I have so far. This is taken from the model of Tamagotchi called the…

Pobrania
227
Polubienia
8
Ocena
5
P
PrintablesPrintgrid

Philips PastaMaker Fusilli die

Printer: Anet A8 Rafts: No Supports: Yes Resolution: 0.15 Infill: 100 Filament brand: eSun Filament color: Yellow Filament material: PETG

Pobrania
222
Polubienia
10
Ocena
4,33
P
PrintablesRon McDavid

Pastamatic Wiper Spacer

Spool tension wipers kept sliding back, with these spacers you can set tension. printed with PLA, 5% infill 12/4 Added taller version for better support

Pobrania
217
Polubienia
29
Ocena
5
P
PrintablesXboxHacker

Pastamatic Remix: 5Kg to 5Kg Spool Winder

This is a modification for my needs. I'll put it here just in case someone else needs one too. I needed a winder to rewind 5Kg spools after splicing them together. It seems all the other Plastmatics go from 3-5Kg to a 1Kg. Most of all my…

Pobrania
211
Polubienia
21
Ocena
0
P

Malleus Draconia "Roaring Drago" Tamagotchi - Twisted Wonderland - FDM

Malleus Draconia "Roaring Drago" Tamagotchi This special treasure took on some little water damage. Luckily Deuce is ace at electronic repairs. This prop is perfect for those who can't remember to feed a sprite every day. Just don't…

Pobrania
207
Polubienia
25
Ocena
0
P
Printablesdotvav

Pastamatic - Filament Spool Winder - Larger Spool Cradle Arm

This is a remix of Pastamatic's filament spool winder that I have adapted for a taller/larger source spool. I wanted to be able to fit my 2.2 kg spool that has a 300 mm diameter. Replace the 2x source cradles with 2 of this. Apologies, I…

Pobrania
200
Polubienia
24
Ocena
5
P
PrintablesBernt

3030 Crossbar Remix for Pastamatic Filament Spool Winder

Stl:s now with mounts for 3030 rails…

Pobrania
194
Polubienia
24
Ocena
5
P
PrintablesAliceChenArt

Tamagotchi Photo frame Keychain + Fidget

This is a Tamagotchi-style keychain that doubles as a mini photo frame . The photo size is about 25 × 28 mm , and you’ll need to trim the corners round to fit inside. I printed mine in PLA with 0.99 extrusion —no supports needed, just…

Pobrania
193
Polubienia
56
Ocena
5
P
Printablesadmin

Approximate Tamagotchi Model

Approximation of a Tamagotchi shape based on photos and rough measurements.

Pobrania
193
Polubienia
9
Ocena
0
P
Printablesboccalino_bus

Disk "Cats" for Philips HR2333 Viva Pastamaker

Designed fot the Philips HR2333 Viva Pastamaker. It should be possible to prepare pasta with the shape of cats. I haven't tried it yet, so let me know if it works! ✌ My print configuration: - ABS - Fill 40%

Pobrania
193
Polubienia
18
Ocena
0
P
PrintablesKoos

Pastamatic - main spindle with 8mm socket

Same spindle, stronger socket.

Pobrania
191
Polubienia
18
Ocena
5
P
Printableskjbturok

Measuring tool for screws (CARD SIZE) / Herramienta de medida para tornillos ( TAMAÑO TARJETA)

A remix based on the kmccon user model .All thanks to him. Haven't you ever gone to the hardware store to buy screws and not being sure of their size? For me at least, yes. With this design you can carry the measuring tool in your wallet…

Pobrania
188
Polubienia
34
Ocena
4,75
P
PrintablesGekoPrime

Pastamatic - Alternate Source Spool Holder

Work in progress, don't expect this to work without modification Post a comment if you see a better way to do this. The idea is to spread friction across the entire surface of the spool so it doesn’t saw through the PLA as quickly. With…

Pobrania
185
Polubienia
46
Ocena
0
P
PrintablesJangy

Gigantamax Gengar in a Swamp (Pokemon) キョダイマックス ゲンガー

Gigantamax Gengar in a Swamp (Pokemon) キョダイマックス ゲンガー You will need to enlarge the model for an FDM printer. Support file is for a resin printer with all the supports, hollowed and drainage holes Category: Sculptures

Pobrania
185
Polubienia
18
Ocena
0
P
Printableslimkang

Balloon Boat - Catamaran V1.1

I designed and made this for our godson. Place blown up balloon on top chimney and watch it go. Makes for a nice bath toy even if you don't use the balloon propulsion My original design here……

Pobrania
184
Polubienia
11
Ocena
5
P
PrintablesJoon Chor

Pastamatic - retention clips - easy open finger tabs - normal and drive side clips

The retention clips are quick and easy to use, except a bit fiddly to open. Added finger tabs to make it easier to manipulate. Remixed both the normal retention clips, and the larger one that is for the drive side on the receiver spindle

Pobrania
183
Polubienia
20
Ocena
5
P
Printables3DGuru

Male Spindle with 3/8 inch socket screw for Pastamatic

I created a square with 9.7 mm. Perhaps it could be made a bit tighter.

Pobrania
175
Polubienia
13
Ocena
0
P
Printableskorniton

Saitama - One punch man - cookie cutter

Saitama from one punch man - cookie cutter model. The file is about 60 mm tall and can cut up to 8 mm dough and can be printed with a 0,4 mm nozel and 0,2 layer height. Its a 2 piece item, one for cutting the cookie dough and one for…

Pobrania
173
Polubienia
45
Ocena
5
P
PrintablesTheRealSullyG

Otamatone Baseball Cap

Give your Otamatone some style with this 3D printed baseball cap! Includes a "universal holder" to clip the hat to the stem of your Otamatone, ensuring it stays in place! Fits on all classic-sized Otamatones

Pobrania
170
Polubienia
13
Ocena
0
P
Printablesfgebhart

Paddle Wheel Catamaran - swims against stream

The "Paddle Wheel Catamaran" is a swimming boat which easily teaches fundamental laws of physics. With a attached cord the boat is able to swim against the stream of a river. Therefore the third Newtons law of motion of classical…

Pobrania
169
Polubienia
32
Ocena
0
P
PrintablesPreston Hall

Pastamatic Hand Crank

Expect a snug fit on the drill bit, especially with PETG.

Pobrania
168
Polubienia
15
Ocena
0