3897 modeli
24.12.2025 Update. I printed another part with a different profile setting at 8 perimeter and the print time was reduced by 1 minute. simple printing in 12 minutes print 0,2 mm structural Print PetG full bottom layers 6 print 3* left and…
Wydruk około 0,47 €–0,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Protects your Joy-Con sticks from getting drift issues. Simple slide on and pull out. Prevents from tilting and clicking the sticks during travels. Available for Joy-Cons and the Pro-Controller.
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
Overspray protector as sold by my favourite motorcycle (and bicycle) care product manufacturer, O.K. Wack Chemie, under the name “SauberSepp” or “CleanBob”. Of course, mine is better :) I have added sides to the reservoir to keep the lube…
Wydruk około 1,09 €–1,33 € nettoWstępna wycena jednego wariantu
printed with PLA, but can be Petg or TPU. TPU would be best choice. If you need some help, or need change the sizes please contact me
Wydruk około 0,78 €–0,95 € nettoWstępna wycena jednego wariantu
This are protector for the expensive original Apple Lighting cable, develop this thing to try to avoid buying new cables twice a year. Better if printed in TPU or flexible material, but works with PLA and ABS or Petg Basic setting, 0.2…
Wydruk około 0,61 €–0,75 € nettoWstępna wycena jednego wariantu
The Compact Muon Solenoid (CMS) detector is one of the big four experiments of the Large Hadron Collider (LHC) , the world’s largest and most powerful particle accelerator. The LHC is part of CERN 's accelerator complex in Geneva,…
Wydruk około 0,88 €–1,07 € nettoWstępna wycena jednego wariantu
Protector Case Kit for JST-XH Connectors (2-9 Pin) Keep your JST-XH connectors secure with this Protector Case Kit, designed for 2-9 pin connectors. This kit provides durable protective covers that help improve cable management while also…
Wydruk około 0,81 €–0,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
An aternative to the existing Lenovo Legion Go Joystick Protectors
Wydruk około 0,29 €–0,36 € nettoWstępna wycena jednego wariantu
Terminal cap for 9 volt batteries. Marked with “9V”, quick print. Recommended print settings: Layer Height: 0.2 mm or less Infill % : 15 Supports: No Print Orientation: Default as modeled Material: PLA Raft: No Brim: No
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
The purpose of this protector is to protect the lenses of the cameras from scratches and shocks by creating a protrusion for the camera section of the phone. Printer configuration: 3D Printer: Elegoo Neptune 3 Pro Filament: eSUN PETG…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Protective cover for child's pouch Prevents the pouch from getting squeezed, protects baby from getting dirty and ensures that all snack contents end up in baby's tummy - Easy to grip - especially useful on the go - designed to ensure…
Wydruk około 5,53 €–6,76 € nettoWstępna wycena jednego wariantu
A propeller/wing protector for the inexpensive Drone Pro/E88/E99/E58 drone. This drone is a knock-off of the toy quad-copter, the “Eachine E58”. You can easily find this USD $20 drone on marketplaces such as Temu and AliExpress. Tested…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
This sunscreen / sunvisor fits the frame of my kenwood DMX8021DAB Radio in my Citroen Jumper and helps to keep the sun off my screen. Please feel free to adapt and modify for your needs. I printed it with PETG and a 0.4 nozzle at 0.2…
Wydruk około 1,09 €–1,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Inspired by Majed's iPhone Charge Cable Protector design, this adapted to work with MacBook charging cables. I recommend to print vertically with brim for good bed adhesion. Even though this may seem like a simple model, it still takes…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
Crank protector for shimano M8100 and SLX675
Wydruk około 1,50 €–1,84 € nettoWstępna wycena jednego wariantu
After downloading and making a propane cap for a 20lbs tank I thought it would be nice to protect the threads on my propane heater and propane torch that I connect to that tank. So here you go a threaded cap that will protect those hose…
Wydruk około 2,61 €–3,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Couldn't find the right size sieve for metal detecting duties so drew one myself. Printed in 4mm thickness but I feel that 3mm would have been sufficient. Model is quite large, could be scaled 80-90% and still fit an adult hand comfortably.
Wydruk około 15,38 €–18,80 € nettoWstępna wycena jednego wariantu
The jaw protectors fits to a jaw width of 100mm (102). I printed the protectors in PLA and TPU as solid parts. A sample gCode is added but my recommendation is to create your own with reference to your filament wish. Any questions or…
Wydruk około 0,80 €–0,98 € nettoWstępna wycena jednego wariantu
So the problem you run into with 1990s cars that next to no one wants is, well, just that. Parts are near impossible to find at times due to demand not existing. Tried to find replacement pieces for the shifter on my 1990 Geo Prizm hatch…
Wydruk około 1,43 €–1,75 € nettoWstępna wycena jednego wariantu
Easy to install protection for your carsh bars. Fits Harley Davidson TOURING 2024+ I recommend printing with high-temperature materials. Use four wall outlines.
Wydruk około 4,34 €–5,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
remix for better fit of usb c in SpeedyBee f405 v4 FC
Wydruk około 0,70 €–0,86 € nettoWstępna wycena jednego wariantu
This is built around standard outdoor North American outlets and is meantmeant to protect the outlets from excessive damage from the elements. The screw holes are 0.9cm in diameter. IfIf you have any questions or concerns, please feel…
Wydruk około 7,44 €–9,09 € nettoWstępna wycena jednego wariantu
This is a remix of https://www.thingiverse.com/thing:5360350
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
This bracket was created for RYD (Responsible Young Drivers) to be used on their 3D VR distraction bicycle. The leap had to be attached to an Oculus Rift S without obstructing its cameras. Furthermore the USB cable attached to the LEAP…
Wydruk około 1,73 €–2,11 € nettoWstępna wycena jednego wariantu
Helps to protect FPV goggle lenses. Designed to be compatible even when you use diopter lenses. Print instructions Best material is PETG, because it's has to be flexible a little bit. Fell free to trim-sand top "bumps" which fit into…
Wydruk około 1,03 €–1,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
We build a simple CO2 detector that measures the CO2 content of the air and gives signals as soon as certain values are exceeded. Assembly manual You can see the instruction how to build this on our wiki:…
Wydruk około 3,82 €–4,67 € nettoWstępna wycena jednego wariantu
Diameter of recommended felt glider: 35mm
Wydruk około 0,38 €–0,46 € nettoWstępna wycena jednego wariantu
This is an easy print, slide on protector for the Quechua 2 seconds easy. Trying to sleep but a funny guy walks by? You are not sleeping anymore. You are trying to escape the trap that was once your tent. You'll be stuck forever and miss…
Wydruk około 2,79 €–3,41 € nettoWstępna wycena jednego wariantu
Enhance your workspace organization with this meticulously designed surge protector mount. Tailored for the SPN7080 series, this mount offers a seamless solution to keep your power strip securely fastened under your desk, ensuring a…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I love using my Tiles, but their buttons drive me crazy! Even if you disable the “Find Your Phone” option in the app, pressing the button can still cause the Tile to chirp for about ten seconds. Furthermore, the buttons are incredibly…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Bolt protector and decocker for Schultz & Larsen Victory. Suggest printing in a color that is highly visible, especially in forest or similar areas. Suggest printing in a material that is less brittle. I printed mine in the photo with…
Wydruk około 4,92 €–6,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These little printable clips are cast iron pot protectors, similar to what some brands of cast iron cookware, such as Lodge, provide when you purchase their products. I modeled these pot protectors to fit our Lodge dutch oven as we had…
Wydruk około 0,10 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Plant Cover Protector This was a cylinder made in Tinkercad and printed on an Ender-3 S1 in vase mode with no bottom layers. Measures 200mm X 200mm X 250mm. With brim in Cura slicer.
Wydruk około 76,58 €–93,59 € nettoWstępna wycena jednego wariantu
Our Gardena Sileno Life 750 (bought in 2019) always find a way to drive under the trampoline and into the trampoline's detachable ladder. The ladder slides over the mower and finally hits the stop button. This model protects the stop…
Wydruk około 0,24 €–0,30 € nettoWstępna wycena jednego wariantu
Jelikož ochranný roh je ze silikonu a nedrží na něm oboustranná lepící páska a spadává ze stolu, vyrobil jsem podložku, kterou jsem přilepil vteřinovým lepidlem na ochranný roh a teprve podložku až oboustrannou lepící páskou. Nyní drží…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
This is a protective Orca Torch battery case I designed to prevent spare batteries from touching each other and causing when traveling by airplane. It fits the D530 and D530V flashlight batteries. I printed it with PETG but I'm sure other…
Wydruk około 0,70 €–0,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Seagate couldn't choose a worse USB connector for their drives (USB 3.0 Standard-B would be perfect, but it would cost them some cents more). It's already very flimsy out of the box…now imagine how it is after some plug/unplug and falling…
Wydruk około 2,50 €–3,05 € nettoWstępna wycena jednego wariantu
I designed a simple cover for NICE motion detector installed for my entrance gate.
Wydruk około 1,23 €–1,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Zanuzzi oven Button protector Designed by R_vdk Application / Functions As my kid (1.5y) keeps pushing the buttons of my oven (and installing alarms at random times, which scare the hell out of us), I made a quick bracket which blocks the…
Wydruk około 0,19 €–0,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Do not print with Beskar fiber filament. It is far too heavy for the Nextruder to handle. Instead use something very light yet somewhat flexible. This print is with some cheap 8% Carbon filled PLA I got Amazon for about $30/kg and it fits…
Wydruk około 2,90 €–3,55 € nettoWstępna wycena jednego wariantu
The FeiyuTech WG2X gimbal's power/mode button is easily pressed if transported not in a purpose built case. It can also be easily depressed while in operation. This model adds a ring around this button making it recessed and much less…
Wydruk około 0,05 €–0,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The AMD processors come in a thin plastic carrier that was originally packaged inside a larger cardboard container that also holds the Wraith fan. However the CPUs are often sold without the fan, and the plastic isn't safe to mail without…
Wydruk około 2,09 €–2,55 € nettoWstępna wycena jednego wariantu
Not made by me just noticed there wasn't an option for these on Printables yet and I have been using these for years now with no issues and my Index lenses have zero scratches because of them. Simply slide them over your lenses and they…
Wydruk około 0,51 €–0,63 € nettoWstępna wycena jednego wariantu
Pint Settings Material: PLA Supports: Organic support seems to be easier to remove.
Wydruk około 1,68 €–2,05 € nettoWstępna wycena jednego wariantu
(French follows) Lenz was the creator of this diode bridge for detecting the presence of trains on the rails. This home made model features both a case and a soldering aid for the 5 1N4001 diodes. The case is designed to be screwed…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Welcome, and thank you for choosing my model. I will provide some context for this model. This is a specially designed protector for a set square. I made it because my set squares often got small dents and damage over time, even when I…
Wydruk około 1,55 €–1,89 € nettoWstępna wycena jednego wariantu
In my basement I have a metal shelf that is behind my top loading washing machine and the tempered glass on it keeps banging off the end of the self. So for my first ever model that I made I made a small little cap to go on the end of the…
Wydruk około 0,35 €–0,42 € nettoWstępna wycena jednego wariantu
When your printer is running 24 hrs. in your house you have to feel more comfortable with a Fire Protection unit next to it. This is a bracket for the WHAM BAM Fire pug. I was watching the tests and was very impressed. I hope I never see…
Wydruk około 1,28 €–1,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Very simple model. Printed with glow-in-the-dark PETG for flexibility and visibility. Snug fit that does not fall off, so no further retainers are necessary. Practical for outdoor operations, only around 6-7g extra weight.
Wydruk około 0,42 €–0,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
a basic corner protector for the sharp edges of a shelf
Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu
I printed two of these to mount the surge protector onto my network rack magnetically using neodymium magnets. (one print for each set of two keyslot mounting holes) I have not tested this vertically so you may need stronger/larger…
Wydruk około 0,33 €–0,41 € nettoWstępna wycena jednego wariantu
La languette figurant sur certaines photos a été supprimée dans le modèle car elle n'était pas efficace. Pour limiter le champ de détection il vaut mieux mettre un ruban adhésif opaque directement sur le détecteur.…
Wydruk około 1,64 €–2,01 € nettoWstępna wycena jednego wariantu
Features Eco-Friendly: Eliminates the need for short-lived disposable 9V batteries. Integrated Charging: Built-in slot for a Micro-USB charging board. Stable Power: Designed to house a DC-DC step-up converter to boost voltage to 9V.…
Wydruk około 2,93 €–3,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Since all the dividers on my garden chairs were broken, it was no longer possible to stack the chairs properly causing them to rub on each other. This caused the powder coating to peel off. However this part has a slightly larger opening…
Wydruk około 0,50 €–0,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
There are several reports that AMS units, that arrived to users from 08.2023 had a slightly changed configuration of the feeding funnel. The AMS Funnel Buttons on the new units are thicker. Please check the thickness of AMS Funnel Buttons…
UPDATE from 15.02.2024: Recently there have been increasing reports that the new AMS, which will be delivered to customers after October 2023, have larger feeder-funnels. And there has also been a particularly large number of reports…
Important! This is a remix version of Perfect Fit Bambu Lab/Bambulab AMS Feeder Button Cover Protector for the new revision of AMS feeding funnel . There are several reports that such AMS units arrived to users from 08.2023 . Please check…
All variant have holes for magnets 1,5x⌀10mm or you can use 2.0x⌀10mm, except for the 3x⌀6mm model. Update 12-09-2025 - Added internal model !! Prototype !! Magnetic version to be used inside, if you want to use the internal spool holder…
These accessories prevent dust or pieces of filament from getting stuck in the Z axis and under the side covers. The shoulders of the PrusaCoreOne_DP_ZAxe.stl files must be directed downwards; they enter the holes in the platform. Two…
I was looking for a silencer and a protective grille for my K1 side fan. There is a wide range on offer here, but any grille in the airflow can increase or decrease the noise. As I didn't want to test everything, I constructed my own. My…
This is an old design and has now been replaced by The SENATE Check out the new design here: https://www.printables.com/model/513350-the-senate-ams-feeder-button-and-protector-for-bam This is a remix of Bambu AMS Feeder PFTE Adapter by…
Beer/Pop Can Opener/Protector SIMPLE PRINTED TWIST CAP USE ON YOUR BEER AND POP CANS TO KEEP NASTY SUMMER CREATURES OUT OF YOUR COLD DRINKS OPENS AND SEAL CANS FITS STANDARD 355M TAB CANS BEER AND SOFT DRINK CANS SHOULD FIT MOST CANS POP…
This is a quick remix. I don't have the cable inserted in the guides (see pic #2) with this cable protector I don't have to. Plus I can slide the protector more easily up when I need to connect the ADXL345 mount.…
Apple Lightning to USB C cable protector for your new cables. Maybe you need setup upside down this model on your slicer. I used raft while printing. You need to slice it so that the narrow edges are perpendicular on the print bed.
Batch 2 styled filament detector mount. It can freely rotate around the pivot and shift the filament line by 28.5mm. Parts have 1 layer sacrificial bridge layer to make it easy to print. For Batch 3 I modified the base. Enjoy it! Any…
This model was provided to me by Creality support to fix the broken pneumatic connector on top of the extruder of the Creality K2 plus . You can also print this to prevent your pneumatic connector from being damaged over time on the top…
The SENATE - amS feedEr buttoN And proTEctor for Bambu AMS System Look at me mom, I used another stupid acronym. I was not happy with all the AMS Feeder Protector Button things out there, they all had flaws and strengths, including my own…
Hi, I hope you will enjoy this 3D print. I will be glad if you like my model. I printed this model on Prusa Mini using PrusaSlicer 2.6.0-alpha5. I suggest turning on ironing in the slicer, 15% infill, automatic painting supports and…
Here is a small collection of thread protectors threaded 1/2-28 in multiple diameters and lengths. No post processing necessary, if your printer is calibrated and tuned well then these should thread on like butter. If they are a tight fit…
Keep your furniture, walls, and equipment safe with this simple yet effective Corner Protector Guard. Designed to absorb bumps and prevent scratches, it’s ideal for desks, tables, cabinets, or workshop setups. The curved inner shape fits…
This was inspired by one I saw at my parents. Why pay $0.25 for one ($6 for a 24 pack), when I can design and print one for much more? This can print without supports using PLA. I haven't tried using TPU, but that might work even better.…
*****Note: Please read the complete instructions before printing this file. Most likely you will have to print this model at about 100% to 108% scale – so, if you don't measure your printer's dimensions before you print, chances are that…
I used the center oriented screw locked version of the model and removed the Elegoo text and hex background. I replaced it with the elegent Elegoo logo. Hope you all enjoy! Please note I have only remixed one of the models. Below is the…
This is a protector fan cover to avoid getting the fingers inside by accident. Based on FeNi64 that it has a file of the model but I couldn't open it to print it. No supports need it Donations through Paypal
Since I published this miniature vice with the optional table clamp, it has become very popular. And I have started to use it myself for numerous hobby activities. If you don't have it yet, feel free to get the latest version here:…
Remixed the rear dust protectors from @dancan13f full set (awesome, love them) so they don't cover the entire back vertical surface, and can fit an 8mm magnet. Replaced the vertical bars with a low ramp so anything that falls should…
Protect your USB-C charging cables from bending and fraying with this flexible cable protector! Featuring a cool flex design, this strain relief clips onto your cable near the connector to absorb daily bending stress and significantly…
Corner Guard attached with simple adhesive pads for photos ... printed in TPU Kantenschutz; Schutz von Tischkanten; Eckenschutz kann z.B. mit einfachen Klebepads für Fotos befestigt werden …
Simple plug protector for the rectangle Starlink antenna cable - this is for the antenna and router side of the cable. The plug is identical but the housing for the plug is slightly different. I printed it in PLA, but have also done TPU.…
Top and bottom tank protector for keeping your resin tank safe in or out of the printer. M4 nuts required for bottom section to screw together! printed these on a Creality K2 Max in PLA Category: 3D Printer Accessories
Print Material For inside use: any material you like For outside use: PETG, TPU or ASA No supports needed. Recommended layer heights M4 - M7: 0.1mm layer height M8 - M9: 0.12mm layer height M10: 0.15mm layer height M12: 0.18mm layer…
I created a hockey stick protector using the Warrior Sabre Taper Senior Size Hockey Stick. The Print is straight so you have to use a blowdryer to manipulate the model to your stick curve. This enables all stick curves and types of…
A small twisted piece that wraps around the charge cable to protect the ends from being damaged from frequent pulling. This file is suitable for the original iPhone charge cable's size. May not be suitable for other cables. Print…
Printed with TPU 90A
This is an HDD tray for a Fractal Define 7 XL (and other models) with an optional SAS protector. The tray is a drop-in replacement or alternative to the original “FD-A-TRAY-001” tray from Fractal Design. Or also called “HDD Tray Kit -…
I didn't like any of the available Designs for Gimbal Protectors already uploaded on Thingiverse so I decided to design my own improved version. Some Key Features I found important: Both Gimbal Protectors connected in the middle, no…
I really like the zorro, but I needed something to protect the gimbals in my bag. So I whipped this together. It's a simple gimbal protector for the radiomaster zorro. Rotate 180 (print upside down) in your slicer to print without…
BTT SB2209 CanBus boards unfortunately have a design flaw that makes it easy to misalign pins in the board to board socket, leading to voltages being delivered to the wrong places. This can ultimately result in damage to electronics, such…
Summary Slim RJ45 Ethernet Cap / Coupler that will save your ethernet cables and especially the plastic retaining tabs on your ethernet cables in bags cluttered with other cables. There is one open ended file to customize to your…
This print protects the x-axis cable from being bend while working. To assemble you just need one of the cable ties that came along with the printer. Print instructions Just print with the flat site downwards in 0,10mm up to 0,2mm with…
XT60 Charged/discharged battery indicator protector caps I print 3 colours and use the blue for battery packs at storage charge. I've printed in TPU but there are a few flexible PLA's available that work well with this model. Print…
Power Plug Protector Box A practical protective box for electrical plugs and extension cords. I recommend printing with PETG or ASA filaments – both are suitable for outdoor use, with ASA offering superior UV resistance and long-term…
Remixed quest 2 lens protecor. Print 2 of them and rotate (not in slicer) accordingly to each eye. The glasses spacer/lens protector is design to keep your glasses from rubbing on the lenses causing scratches on them. this is useful if…
Tips : Wrap a layer of clear tape around the TYPE-C or USB-A/ lightning head before install, for a stiffer grip. If your cable is produced before 2019 try the old lightning ( on usb-a…. folder)
I have printed and installed this mods on my bao but no field tested yet Supports needed for guard part.
This part replaces the spool holder on the Elegoo Neptune 3 Pro. The Neptune 3 Pro has a large spool holder that increases the height of the printer. I use a filament dryer on a bookshelf above my printer so the built-in spool holder is…
Updated v1 box with v2 cantilever clips and included more sizes which can be found here --→ https://www.printables.com/model/146721-cable-management-box Cable management box to store surge protectors and tidy up cables. Now with…
This is a remix from https://www.thingiverse.com/thing:4745565 (by Hodgepodge_Foxe). Thanks to Hodgepodge_Foxe for providing the f3d files: "Somewhere up in the 3d printing heavens, there is a choir of angels 2000 deep singing praise to…
I needed a quick couple of SD card/SDcard cases the other day and downloaded/printed Rod's SD Card Holder remix of guytas's SD card labelling case - both are great models. However, I was looking for something a little bit smaller.…
A small print that you can clip onto your Sticks so they stay center and can't be pressed anymore. Essentially locks the Sticks in place. Protects against bends, pressing forces or anything else. Print in TPU or any other flexible…
