69 modeli
I wanted a good DIN Mount for my Shelly Switches to mount them properly into my electrical box, but all that i found did not really satisfy me. So i made my own inspired by severel other designs with these key features: vertical…
Since the Shelly EM has slightly different dimensions, I created this remix.
A small cover for the wiring terminals of the Meanwell RSP-320 power supply. Edit 08-2022: Thanks nosstromOS for confirming the compatibility with the LRS-200 power supply. Thanks Keith Chong for confirming the compatibility with the…
Remix to suit Shelly 1 Gen 4 and changed the Labels to I and O
Simple Terminals Cover for the V0/V0.1 Mean Well LRS-100-24 or LRS-150-24 PSU. STEP file provided if you'd like to tweak it. Below the requirements and settings, settings are from the Voron Manual, a bit overkill for this but at least you…
Small covers for gel and AGM battery terminals - M8 screws The covers fit onto the M8 screws quite tightly, but that's how it's supposed to be. Small latches on the wire side also prevent the cover from slipping out. The 3mf file is from…
AAA battery holder / box for bambulab maker's supply battery terminals PH2.0 connectors https://eu.store.bambulab.com/en-it/products/aaa-battery-spring-contact-plate-with-ph2-0-connector?_pos=2&_sid=203a2ee1f&_ss=r ***PLEASE POST A PHOTO…
The interior walls are very thin and may appear to slice with gaps if you're using a 0.6 mm+ nozzle. Printed okay and does the job.
IMPORTANT NOTE: If your battery's terminal(s) / terminal wire(s) get hot you need to ensure the printing material you use for this design will suffice. The included GCODE files assume the use of PTEG. This battery terminal cover is a two…
Wall socket for speaker cable, needs two metal banana plug sockets with speaker whole. Best if you use gold-plated version. Dimensions: Rectangle - 80mm x 80mm Screws distance 62.25mm x 62.25mm Screw holes 4mm Outside diameter of the…
Overview & Parts List I made this to quickly swap the cords on a camera power adapter I have. Besides the 3d printed parts, you'll need: Qty 2: M3x8 Button Head Screw Qty 2: Male Spade Connector* Qty 2: Female Spade Connector* *I removed…
This is a battery box that uses piggyback spade terminals for the outputs. The default dimensions are for four 32650 LiFePO4 cells, a BMS and a bit of padding. The connectors I used are called “piggyback connectors”. They friction fit…
I had several different sizes of battery terminals/contacts that I wanted to use for building 18650 chargers with a TP4056 USB-C board . There are plenty 18650 charger cases to be found online, but none fit my battery terminals quite…
FREE Promo models for our latest Kickstarter terrain set, DarkHyve Assault! https://www.kickstarter.com/projects/saucermenstudios/darkhyve-assault?ref=aar0x5 Want the full set? The DarkHyve Assault bundle is a large collection of 3D…
Wago Klemmenhalter in verschiedenen Ausführungen für jeweils zwei Klemmen zum Schrauben Wago terminal holders in different versions for two screw terminals each Category: 3D Printing
Description: Upgrade your DIY projects with these 3D printed battery terminals , designed for hobbyists, makers, and radio enthusiasts. The model provides a snug fit for standard battery posts, ensuring reliable connections while keeping…
A simple 1.5mm thick end-cap which snaps into Phoenix Contact PTTP 2.5 DIN rail terminals and covers the contacts. Can also be used as a divider between banks of terminals. Might require a drop of superglue on the tabs depending on print…
Update 10/9/23 - I added knobs that have a “+” or “-” indicator on them. This may be helpful if you're not able to print them in red and black. This breadboard holder has power for both rails which can be powered with different voltages…
This housing fits Generation 3 Shelly devices and has external dimensions of 5cm x 10cm x 2cm. Inside the enclosure you can fit a Shelly 1, Dimmer, RGBW2, 1PM, 2PM, Plus or any other Gen3 device in this form factor (~42cm x 38cm x 17cm).…
Adds Ring Terminals to the Printable Label Set for the Gridfinity Bins by Pred
Round recessed speaker terminals with spring tensioned quick connect wire terminals.
a simple cover for the terminals of a car battery. I have created the cover to ensure that the contacts can not be bridged by mistake when installing. It is recommended to print one in red and the other in black. Red for the positive…
DIN-rail box for custom electronics projects with space for 16 terminal ports. The clamp can be opened with a screwdriver at the top to attach the box to the rail. A version for a ESP32 supermini is available. Almost all the GPIOs can be…
This locking battery mount for the Ryobi ONE+ 18v battery allows you to add easily swappable power to all your projects. The model has two holes (center distance = 1.25") for mounting, and a 0.125" chamfer at the base of a 1.209" wide,…
I made it with standard PLA 0.28mm draft 55% infill
I modelled this Powerpole terminal blade receptacle to replace the one that comes with the original Eclipse Tools Powerpole crimping die set (the black plastic part) mainly because I was not satisfied with it. I wanted a part that can…
Not much else to add. Sharing the parametric OnShape project as well, you should be able to configure the variables for any similar battery type
You can customize whether you want the batteries in parallel or series. It is reccomended you print the contact retainer at 0.10mm layer height (or use a smaller diameter nozzle). Here are the hardware I used for this model: Battery…
Having to work with different CAN dongles and devices with a CAN interface it is quite common, that I needed to connect many of them to the same CAN bus. Many of those have Sub-D as a interface. But often they are not the right sex (you…
Designed specifically in cases where your cable connections to your MK52 heated bed is tall - in my case due to a combination of using a slightly thicker cable and using ring terminals with a really thick insulation layer. This cover is…
For Mean Well LRS-350-24. It may be suitable for other LRS and RSP as well. PETG or ABS/ASA. Printed using perimeters only. It is installed very tightly, you may need a screwdriver to remove it back.
Easy (and fast) to print, snug fit, should lock in place after mount. Tested on RS-35-5 PSU.
This is a printed adapter that make it a bit easier to use the IWISS 322M crimper on 1.5mm CLIK-Mate connectors. This crimper is ~$300 to $500 cheaper than the official crimp tool, putting these terminals within the reach of the hobbyist.…
A compact male and female connector housing designed for standard 6.35 × 0.81 mm uninsulated Faston terminals . The two housings have a polarized shape that prevents incorrect connection. The female terminals are retained by an internal…
The mount has been redesigned with a slightly increased thickness to accommodate the additional wiring requirements of the Shelly Plus i4. It now supports: 2x WAGO 221-412 terminals mounted side by side 1x WAGO 221-415 terminal for the…
three grimdark computers for any tech priest to fall in love with
Designed plastic parts to replace the cheesy terminal posts on my Astron SS-50M power supply. One of the setscrews (or its threaded socket) is stripped. So I used OpenCAD to design plastic parts for a traditional 3/16” bolt lug nut…
Not found an 18650 sled that suits my needs. These are all 20mm wide x 80.55mm long. Designed for unprotected cells, it is not far off fitting a protected, you could probably print 2-3% larger and it would fit them without upsetting the…
Mit diesem Adapter lässt sich Marc Neuhaus' Model auch für den Mini nutzen Das Original habe ich nur editorisch angepasst. Beschriftung geändert und Fasen hinzugefügt. Das folgende Bild zeigt den mittels Adapter eingebauten Shelly Mini…
I printed it with PETG filament. It is 170x120x28mm in size. For those who want to modify it, I have also uploaded the editable files.
Distribution box for Wago terminals. Distributor for two ceiling lamps
About Mean Well RD-50A terminal cover done from scratch. On the photos there is a version without an additional mount hole to the right because I do not use it, also quick ugly print, but usable. Please give a like and post makes and…
Those rugged Kärcher VC7 Nozzle holderbrackets are holding three nozzles, either straight or 90° turned.
isolation cap for m6 nut/screw battery terminals
Cap with a little "separator" to prevent the terminals to touch, in case of using single wires for each Terminal.
Printer from Sunlu Easy ABS. But can be used other preferable nonflammable filemant. Printed 0,2mm layer without support. Enjoy.
8mm Connectors Terminals MODEL
Charge well with groove and matching cap. The ¾" size has integrated WAGO 221 terminals arranged to fit on the 2.6" dia bulkhead of a Punisher 2.6. Mounting is with a single hole in the bottom for a #6 100deg countersunk screw. The charge…
Tested and works with S-150-12 model. Print in PETG.
These are handy for powering your prototypes on the bench if the regular power supply connectors don't suit you. Not rated for mains and not as safe as Cliff “Quicktest” Connector because it doesn't disconnect the power when you access…
A modified version of the battery holder for the Xiaomi temperature sensor LYWSD03MMC to fit larger batteries. Replaces the CR2032 battery with AA batteries for greatly extended battery life. Uses metal battery terminals which are…
The mount has been adapted to accommodate the different dimensions and wiring requirements of the HMIP-FROLL. The design allows for two different WAGO terminal configurations: 2× WAGO 221-413 terminals or 2× WAGO 221-412 terminals with an…
Copper Terminal LiFePO4 33140 cells can be found somewhat cheaply online but they have very obvious issue for the DIYer - the copper bus on the positive terminal is <2mm tall and can easily be shorted against the cell body. These caps are…
I wanted to cover the terminals/lugs on my Blue Sea ML 7701 Solenoid, as they were left exposed, to minimize possible random risk. Extremely unlikely, but just in case. The solenoid is installed horizontal, and Blue Sea said that's OK as…
I use regular nuts on inverter terminals instead of stock thumb nuts and there is some risk of shortening. So i made this
XL6009e1 buck converter case with terminals remixed from STEP UP DOWN CONVERTER CASE xl6009 by (Create_Tec)
Surface-mount speaker terminal box for 2-way spring terminals A 3D-printed surface-mount enclosure for the common 2-way spring-clip (push) speaker terminal. It lets you add a binding post to a wooden speaker cabinet without routing a…
I printed these out of ASA GF to replace the ones in my 83 K20. I haven't had any problems with the summer heat softening the plastic. I DO NOT recommend trusting these made out of anything with a low melting point. If you do, ensure you…
This 3D-printed guard is designed for the ZOYI DQ01 and DQ02 Portable LCR Digital Bridge . This product:: ZOYI ZT-DQ01 https://s.click.aliexpress.com/e/_c3xlFghD ZOYI ZT-DQ02 https://s.click.aliexpress.com/e/_c3GsDmCP It helps prevent…
This is a simple Distributor Hub that I sketched up in an afternoon, printed and wired together. You can connect your control station with up to 4 consumers (be that multiple rail blocks, accessory decoders, etc). Using these standard…
Tested and works with S-150-12 model. Print in PETG.
Charge well with groove and matching cap. The ¾" size has integrated WAGO 221 terminals arranged to fit on the 2.6" dia bulkhead of a Punisher 2.6. Mounting is with a single hole in the bottom for a #6 100deg countersunk screw. The charge…
Overview & Parts List I made this to quickly swap the cords on a camera power adapter I have. Besides the 3d printed parts, you'll need: Qty 2: M3x8 Button Head Screw Qty 2: Male Spade Connector* Qty 2: Female Spade Connector* *I removed…
For Mean Well LRS-350-24. It may be suitable for other LRS and RSP as well. PETG or ABS/ASA. Printed using perimeters only. It is installed very tightly, you may need a screwdriver to remove it back.
Distribution box for Wago terminals. Distributor for two ceiling lamps
Description: Upgrade your DIY projects with these 3D printed battery terminals , designed for hobbyists, makers, and radio enthusiasts. The model provides a snug fit for standard battery posts, ensuring reliable connections while keeping…
Wall socket for speaker cable, needs two metal banana plug sockets with speaker whole. Best if you use gold-plated version. Dimensions: Rectangle - 80mm x 80mm Screws distance 62.25mm x 62.25mm Screw holes 4mm Outside diameter of the…
Having to work with different CAN dongles and devices with a CAN interface it is quite common, that I needed to connect many of them to the same CAN bus. Many of those have Sub-D as a interface. But often they are not the right sex (you…
