1054 modeli
A little stand for the standard LCD Hygrometer or Thermometer you can find in many onlineshops. Easy to print with the face on the printbed. Click here for a smaller version of this stand! If you like check out my other designs too!
Wydruk około 1,05 €–1,29 € nettoWstępna wycena jednego wariantu
Für den Xiaomi Mijia Bluetooth Thermomether/Hygrometer habe ich eine Wandhalterung konstruiert. Da dem Gerät nur ein doppelseitiges Klebepad beiliegt und keine weiteren Befestigungsmöglichkeiten vorgesehen sind, könnte es bei einem…
Wydruk około 0,81 €–0,99 € nettoWstępna wycena jednego wariantu
Radiation shield or sun shield for Mijia thermometer. I was using this thermometer for about 1,5years outside (-10°C to 45°C) under simple PLA 3d-printed roof and it worked well (despite that it should be indoor one.) The roof was…
Wydruk około 1,67 €–2,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Modified LACK enclosure for Prusa MK3 with an embedded thermometer and LED dimmer. This remix modifies the top corner pieces so that a thermometer can be put inside the left leg piece and a LED dimmer inside the right leg piece. Warning:…
Wydruk około 0,58 €–0,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
When I first got the Combustion Inc predictive thermometer, I thought it was super neat. However, I had two issues with it: The display does not have a magnet so you can't stick it to metal surfaces The whole thing is two main “bits” that…
Wydruk około 2,21 €–2,70 € nettoWstępna wycena jednego wariantu
This is a holder for a ThermoPro TP50 thermometer than can be glued at my “Non-damaging 3 pin base plate” for usage in an Ikea Platsa. I recommend to use UHU Plast special glue for this. I have attached the original FreeCAD (I am using…
Wydruk około 1,57 €–1,91 € nettoWstępna wycena jednego wariantu
In order to know the accuracy of my own thermometer/hygrometer, I built the holder 3Ds directly😊 The Sensirion SHT4x holder refers from https://github.com/Sensirion/smartgadget-sht4x-housing/tree/main/Housing . And the diameters of the…
Wydruk około 0,73 €–0,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET
EN: The thermometer/humidity meter stand is designed in the Fallout Sunset Sarsaparilla style. It consists of two parts (the stand and Sunset Sarsaparilla holder). Print with a 0.4mm nozzle, 0.2mm layer, 2 perimeters recommended and…
Wydruk około 1,00 €–1,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Amazon link to the Mini Digital Temperature Humidity Meters Gauge that was used (fits perfectly): ( 4 pack for $13 USD) “4-Pack Mini Digital Temperature Humidity Meters Gauge Indoor Thermometer Hygrometer LCD Display Fahrenheit (℉) for…
Wydruk około 7,08 €–8,65 € nettoWstępna wycena jednego wariantu
I needed a container for my new Rösle BBQ Probe/Thermometer so i designed it to fit in the Parametric SnapLock Box by Hugo. https://www.printables.com/de/model/805599-snaplock-storage-boxes-parametric Box Parameters Used: Length: 100 mm…
Wydruk około 3,83 €–4,69 € nettoWstępna wycena jednego wariantu
The roast thermometer needed a safe place in the kitchen… … et voilà 1 Just print in PLA, the needed threads are in the model. 2 To assemble all parts 6 M4 x 16 and 6 M4 x 25 are needed. The model suits for:…
Wydruk około 1,84 €–2,25 € nettoWstępna wycena jednego wariantu
The manual for the Aeon A200 ir thermometer states that the sensor is to be kept clean and may not be touched. Unfortunately the thermometer is provided without case or cap to protect the sensor. So I made one. Best printed in PLA. I…
Wydruk około 0,21 €–0,26 € nettoWstępna wycena jednego wariantu
Layer height 0.25 Supports YES PLA material Fill 10-15%
Wydruk około 2,08 €–2,54 € nettoWstępna wycena jednego wariantu
A holder for the Xiaomi Mijia 2 Thermometer/Hygrometer. Mine kept disappearing. If glued to the wall, it was a pain to change the batteries. So i made this holder. One standard wall mount and one Corner Mount. The Corner Mount can be…
Wydruk około 0,20 €–0,25 € nettoWstępna wycena jednego wariantu
I like to have a thermometer in my office to monitor temp and humidity (for filament and otherwise). Wanted to declutter my desk, so made this simple mount for a ThermoPro Thermometer/Hygrometer to sit on top of my Gigabyte monitor. Uses…
Wydruk około 0,66 €–0,81 € nettoWstępna wycena jednego wariantu
Printable accessory developed specifically to enable you better viewing angles with Adjustable Thermometer bracket on your Original Prusa Enclosure. To mount the Adjustable Thermometer bracket you will need the following fasteners*: M3x8…
I've been using the great silica boxes designed by SoftFever (https://www.printables.com/model/269545-slica-boxdry-box-for-bambulab-ams) inside the left/right slots of the Bambu Labs AMS and the thermometer/hygrometer stand by maddtt…
Small stand for Bambu Lab AMS unit to hold a hygrometer. The Hygrometer was purchased off Amazon and was a "JEDEW mini hygrometer"
A minimalistic stand for the standard LCD Hygrometer or Thermometer you can find in many onlineshops. The bottom is labeled, pay attention to this when inserting the hygrometer. A larger version of this stand:…
A simple tabletop stand for your Xiaomi Mijia thermometer 🙂 Printed in Hatchbox PETG (No supports required)
Držák teploměru do tiskárny Prusa CoreOne pro přímou kontrolu teploty i vlhkosti v komoře. Teploměr je čitelný i přes dveře. Do vytištěného dílu vložit dva magnety a teploměr. Nebo místo magnetu použít nylonový nýtek , který zbyl od…
Thanks Extrutim for the original design! I searched a nice place for the original stand and saw my skadis board... So I added two hooks and ventilation holes. As simple as that.
Hydra Compatible 4.1 Model updated for Errors in model that someone reported bambulab 2 row desiccant holders, this works with a hydrometer and sits behind it as well in total you can fit 5 inside, 6 without the hydrometer and you do not…
It's a wallholder, it adheres to the wall using doublesided tape. Edit 2024: added a hole for a thumbtack.
This is a remix of @Raymond's ‘ Hygrometer house for Prusa Core One’ but instead of using the 20x5x2mm or 20x6x2mm magnets this uses (up to*) four 6x2.5mm round magnets (other magnets will work as well, like 2-3mm in height is confirmed…
I had already designed a exhaust solution for the Adventurer 5m Pro ( Removable Exhaust Duct for FlashForge Adventurer 5m Pro by Simon | Download free STL model | Printables.com ), so wanted remove the exhaust filter and cover plate. I…
Thermometer holder for Prusa CoreOne / + / L printer for direct control of temperature and humidity in the chamber. The thermometer is readable even through the door. Insert the thermometer into the printed part. Use the nylon rivet left…
Držák teploměru do tiskárny Prusa CoreOne pro přímou kontrolu teploty i vlhkosti v komoře. Teploměr je čitelný i přes dveře. Do vytištěného dílu vložit dva magnety a teploměr. Tisk: materiál PETG, vrstva 0,2mm, perimetr 2, výplň Gyroid 15…
angled mount will fit small and bigger thermometers, with openings from 12mm up use with blank insert_hollow from the original HSW board Check out my collection of HSW attachments here :) Printing instructions: no supports use 4…
This mounting bracket attaches the Xiaomi Mijia Bluetooth thermometer to an IKEA SKÅDIS pegboard . The thermometer is held from each corner and can be removed easily if needed. The model consists of two parts: A frame holding the…
the sensor is from aliexpress: (20x25x71 mm) https://de.aliexpress.com/item/1005006008193742.html the two parts just snap together I would only print this in white :) Other colors including black will heat up more in the sun! printed with…
Update 23/05/26: added mirrored version to fix battery hole issue Update 11/12/24: added cutout for battery cover to make replacing the battery easier, model now has built in supports that should be removed before assembly Print Settings:…
Stand for the round mini hygrometer / thermometer from Amazon or Aliexpress, that fits perfectly into the Bambu Lab AMS. It is slightly higher than other stands so that the humidity is measured close to the filament. I printed it in PLA…
Mini LCD Digital Thermometer
This mount is for a round hygrometer thermometer from EEEKit which is very easily available on Amazon. The assembly is very easy with 4 pieces of 8x3mm magnets. Two are clipped inside the mount and two are attached to the plexiglass…
I bought a pack of 8 of these hygrometers for a filament dry-box storage project and had few left over. I wanted to have one of the leftovers out next to the dry-boxes to show the difference between inside them vs outside. So this is a…
Shameless Money Grab: ;) If you feel like it, you can support my hobby here https://buymeacoffee.com/mke.dan
Small holder for Infrared Thermometer for the Ikea Skadis board. Fits Thermometers with Ø15mm opening. Print with solid infill. The thermometer applies some force on the holder, so I printed with PETG. It works good. The design is focused…
My another version of AAA battery case for Xiaomi Bluetooth/Zigbee thermometer. This variant arranges batteries on the sides so the whole thing has a slimmer shape better suitable for wall mounting. The case is designed to be printed…
I designed this case to hold a temperature/humidity meter display inside my Ikea Lack enclosure. I got the meter here:…
Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this or any of my other designs you can send me a small donation using the link below. Thanks :)…
A gridfinity module for storing your IR thermometer.
This is a case for cheap thermometers that you can find on Aliexpress:…
Fits pretty much any standard-sized 28x47mm clip-in hygrometer or thermometer. There are two versions. One as a free-standing 45° angled stand and one that is made to be sticked to a clear container (filament storage/larger drybox) using…
I hate when wires get all tangled and kinked, and the stainless steel braided thermometers are especially bad. This model is for Trager style 3.5mm jack thermometer probes that have a silicone sock around the top of the probe. Holds the…
Honeycomb Storage Wall Mounts for some common Thermometer / Hygrometers: Xiaomi Mijia Aqara WSDCGQ11LM Common Rectangular Hygrometer All print in given orientation without supports. ♥ Looking forward to your makes! ♥
This is a simple print that uses 6-8 10mmx2mm disk magnets inserted into the recesses in the back. It allows you to store the meat thermometer on the grill when not in use. It also allows you to coil in the slack from the cord while in…
I needed a more low profile mount for the DS18B20 to place it inside my enclosure without it interfering with the 3D printer. This design does just that, allowing me to access the printer without the thermometer getting in the way. You…
This is a solar radiation shield for mounting a temperature sensor outdoors. The shield allows air to flow through freely, but protects the thermometer from direct and reflected solar radiation. This provides a much more accurate…
A stand designed for the temperature and humidity meters often found in online stores. It replaces the stock case to deliver a clean, ultra-minimalist look. Required other than printed parts: 1x Thermometer/hygrometer Disassembly…
Small holder for Infrared Thermometer for the Ikea Skadis board. Fits Thermometers with Ø15mm opening. Has a bit tilted nose 15° for a more secure hold. Uses universal hook to mount.
Mi thermometer is slightly tilted to make it more readable. Ventilation at both sides to allow for correct readings. Check out the custom firmware if you want to integrate the sensor into your smart home:…
A simple holder to mount the IR thermometer from parkside on a Skadis Pegboard. The Thermometer can easily be removed, but stays in place nicely. Supports Required!
Stand for cheap thermometer / hygrometer that replaces LR44 batteries with single AAA battery as power source. Thermometer / hygrometer module can be bought on aliexpress, amazon etc. Variant with and without sensor mounted on the cable…
Those little Bluetooth thermometers from Xiaomi can be flashed with custom firmware to turn them into Zigbee devices. But Zigbee implementation consumes a bit more power and a small CR2032 battery may not last too long. This model…
This is a holder or rack to hold an IR thermometer gun. The brand I have is a Etekcity Lasergrip 774 Non-contact Digital Laser Infrared Thermometer Temperature Gun , but I see these sold under a variety of names on Amazon and elsewhere. I…
A simple free-standing case to hold a cheap rectangular combination hygrometer/thermometer module. Available in a 30° and a 45° front angle version. The rear wall is perforated to allow the ambient air to reach the sensors inside the…
A thermometer/hygrometer holder that is installed inside the Prusa Core One enclosure using magnets. This holder is designed to replace the stock case that comes with the thermometer/ hygrometer. It has a slim bezel for better visibility,…
I recently purchased a Xiaomi Mijia Digital Thermometer / Hygrometer. It's a great little device. The only drawback so far is that there is no stand included. It only comes with a magnetic plate for wall mounting. Therefore I designed my…
The 2 STL files will print the 2 halves of a storage device for the probes used with a meat thermometer used for grilling smoking or roasting meat. I designed this around the ThermoWorks probe so the probe will store neatly without velcro…
Adjustable Angle Hygrometer Holder! Tired of bending down to get the right viewing angle for your hygrometer? Tilt the hygrometer instead! Open Back design: does not block any sensors and the battery is swappable without removing the…
Thermometer: Topker Mini LCD Display Round Digitální teploměr vlhkoměr Fridge Freezer Venkovní Indoor Temperature metrů tester : Amazon.de: Byznys, průmysl a věda
Holds a digital thermometer display for a fish tank. The suction cups always failed after a few weeks.
Based on the work of Mirko Pavleski i've created this 3d printable design. The BOM remains the same, I used the Arduino Nano Every instead of an Arduino Nano, also I left out the switch for changing the display modes. The thermometer is…
a simple Thermometer Stand for: https://www.ebay.com/itm/Indoor-Outdoor-Monitor-Meter-Digital-Display-LCD-Hygrometer-Humidity-Thermometer/123147345651 or…
Voron Thermometer / Hygrometer Mount
A simple mount for the Xiaomi LYWSD03MMC Bluetooth thermometer, designed to fit into the standard hex opening in RostaP's Honeycomb Storage Wall (HSW).
Features Combines the Adjustable Thermometer Bracket and the Filament Guide Enables to use a second spool holder on the left side Uses the same hardware as for the filament guide What you need Printed parts thermometer_bracket_A (1x)…
Thermometer: https://www.ebay.com/itm/384519105434?hash=item59871feb9a:g:NEEAAOSwj8xhnLcx
Simple mount to keep the Thermometer secure and in one place
just tinkered the design to remove the raised knob to allow the model to be print flat which makes printing easier
Zigbee and WiFi has exactly the same dimensions, so it'll fit any of them. Device identified as TS0201, WSD500A or TH02Z.
With the way my enclosure lights are set up, the default thermometer mount was hard to read. This is a remix of the official "Adjustable Thermometer bracket for Original Prusa Enclosure" that instead mounts to the top of the printer…
Mount for common round hygrometers typically used by filament dry boxes. Intended to be mounted with 2 M3 screws to 2020 extrusion. I use this to monitor temperature inside my 3d printer enclosure.
Need 2 self-screws 2.9x13 or two hot-melt nuts M2 and two screws M2, for a better look use the handle as in the photo from here <3
Einfache Halterung um die überall erhältlichen Thermo/Hygrometer am Prusa Rahmen zu befestigen. Die Halter welche ich hier gefunden habe, waren alle für die rechte Seite des Rahmens, und damit im Tukkari nicht nutzbar. Dieses hier passt…
The print is very easy to make. To supports are needed. Place the hole on the plate. You can use https://www.amazon.de/dp/B07JG9QZ2B?ref=ppx_yo2ov_dt_b_product_details&th=1 as sensor. ######################################### Der Druck…
Used to hold an Etekcity IR thermometer on the wall Print instructions Use adhessive to mount it. Holes can be easily added to it if you wanted to screw it in. The fit is supposed to be gentle and not super tight.
Hello, Welcome to my profile, full of models and miniatures :-) I have for you a Thermometer / Hygrometer Holder for ACE pro from Anycubic. It is for a circular thermometer / hygrometer with an inner diameter of 41.5mm. Of course, it can…
Magnetic thermometer hydrometer mount that can be used to mount in a 3d printer enclosure, or dry box for filament. Thermometer dimensions Front dimensions 48mm x 28.5mm Rear dimensions 44.5mm x 26mm Can use 8mm circular magnets or 20mm x…
Hi, I have constructed my version of Xiaomi Mijia Bluetooth Thermometer Hygrometer bracket for my SAMLA drybox. It is also compatible with cheap popular chineese noname thermometer/ hygrometer. Just print, use double-sided tape and stick…
holder for Infrared Thermometer for the Honeycombstoragewall.
Here's a super-simple mounting solution to hang your outdoor hygro/thermometer with a single screw. I've had one mounted outdoors for several months with no issues. Print Settings Printer Brand: Creality Printer: Ender-3 S1 Pro Rafts: No…
Magnetic mount for cheap chinese thermometer. Thermometer can be installed in two ways - with magnets on bottom or top (including top of P1P/P1S). Mount under angle, so P1* LED doesn't shine too much into LCD. Works with X1C, too. Using…
I could not find a hygrometer/thermometer mount that didn't use the top support of the Prusa i3 MK3S, so I created one for use on the side supports. This may be needed for anyone who doesn't have enough clearance within their Lack…
Halterung für Ohr-Termometer Braun Thermoscan 6 und andere Modelle von Braun Zur Aufnahme des Thermometers und der Hygieneschutzhüllen. Gedruckt mit PLA 0,2mm Layer - 20% Infill
Designed and tested this simple holder. Uses about 6g of filament. 2 versions available, 85 and 80 degrees tilt. 85 degrees = good for higher placement of the meter (e.g. on the closet/wardrobe, etc.) 80 degrees = good for lower placement…
Update 14.12.23: Ich habe die entsprechenden Dateien für runde Scheibenmagnete 6x2mm hinzugefügt (Thermohalter_6x2.*) Um Infos über die Innenraumtemperatur im P1S zu bekommen, habe ich einen kleinen Halter für ein Thermometer entworfen.…
This is a minimalistic design for the well known thermometer/hygrometer. Can be used as a stand, but also wall or ceilling mount is possible. It is designed with a screw hole but the base surface is big enough to use a sticky tape also.…
Already a great cover. I added a port for Hygrometer to provide temperature and humidity measurements while the filament is drying. Added four small holes near the bottom to allow a small amount of fresh air enabling convection flow to…
Requires an M3x12 bolt and an M3 nut. I designed this for a friend and he told me to upload it Print Settings Printer: Ender 3 V2 Rafts: No Supports: Yes Resolution: 200 Infill: 20 Filament: DasFilament PLA Black Notes: only the upper…
3D printed shield, against overheating of the thermometer in direct sunlight. The doubling of the shield makes it possible to better shield the salve heat from the heated outer shield. Assembly manual
Prusa CORE One Hygrometer - Thermometer mount for the CoreXY front rail, no magnets, no glue, just click onto the rail. Place on right or left side or wherever you like on the CoreXY front rail, can be easily moved on the rail or quickly…
I remixed the wall mount, because I wanted to have two screw holes with a bevel, no text and round corners. Thanks to LICK_THE_BUTTER for the inital work. No supports needed!
Español: Soporte para colocar un termómetro/higrómetro en el marco de la prusa mk3s. English: Support for placing a thermometer/hygrometer in the frame of the mk3s
These mounts are designed to easily install a hygrometer/thermometer on the inside of transparent container. The mount consists of two plates. The outer plate can be attached to the respective container with double-sided adhesive tape or…
Remix for small holder for Infrared Thermometer for the Ikea Skadis board and Küpper EU board to fit thermometers with Ø17mm opening. Print with 100% infill.
For this project we are building an Arduino-based thermometer and humidity display. It shows the current temperature, temperature index (feel), humidity level and dew point. It also displays a graph of the readings from the past 12 hours.…
just replace M3*6 to M3*8 For https://www.printables.com/model/356301-arc-for-bambu-lab-p1p You can also make it for X1 or other one
