883 modeli
When I discovered snacking tongs on printables, I really liked the idea and immediatly downloaded and printed one. They served their purpose, but they just felt wrong between my fingers. They were too bulky, heavy and they used a lot of…
Wydruk około 0,84 €–1,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Enjoy snacking while keeping your hands clean with the Snack Finger Chopsticks ! Perfect for gaming, working, or just enjoying your favorite snacks without the mess. These lightweight, ergonomic chopsticks allow you to grab chips,…
Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu
A remix of LoboCNC's Gravity Broom Holder , integrating 3 and 4 holders within a single block. For compact storage of multiple brooms or other tools, requiring fewer screws for mounting on the wall. Adjacent holders have been slightly…
Wydruk około 0,52 €–0,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
You like to eat snacks while gaming or coding, but you are annoyed about getting a filthy keyboard, mouse or gamepad? Then this little tool will help to keep your hands clean. Yes it’s not a new idea … originally it’s inspired by snactiv,…
Wydruk około 1,31 €–1,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hello friends, This is a 3d print for everyone getting in to the fpv hobby on a budget if you have the ps5 controller ofc. it prints very fast and makes your accuracy a million times better. i suggest printing it at 19.5 mm for x/y
Wydruk około 0,19 €–0,24 € nettoWstępna wycena jednego wariantu
In the slicer I remove the first milimeter from the bottom or to avoid putting supports. Print instructions In the slicer I remove the first milimeter from the bottom or to avoid putting supports.
Wydruk około 0,53 €–0,64 € nettoWstępna wycena jednego wariantu
Features… Aerated handle with grip bumps for comfort, lightness, ease of handling and no-slip. Subtle, yet effective 3° bend at end of sticks for a solid grip on those snacks. Teeth at the very tip perfectly come together for picking up…
Wydruk około 1,09 €–1,33 € nettoWstępna wycena jednego wariantu
Ein paar einfache “Fruchtzwerge-selbstmach-Eis-Sticks” im Smilie-Design. Da bei jeder Packung immer nur einer dabei ist, kann man immer Ersatz gebrauchen. Ich habe das Ganze mit Prusament PETG gedruckt, wegen der Lebensmittelechtheit und…
Wydruk około 0,39 €–0,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I grow hot peppers, and when the seedlings go out from the propagator, they sometimes need some support, therefore this was the motivation to create ones. I can get for a cheap price bamboo sticks from various diameters (3.38mm, 4.00mm,…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
Here's a little stick that will hold your Micro-SD card and allow you to attach a label. Each one is about the size of a stick of gum. Want to print one with customized text rather than writing on a piece of tape? Try the "emboss" feature…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
This chopsticks allow you to eat messy stuff without making your table dirty. PETG is preferable since PLA will eventually break.
Wydruk około 0,34 €–0,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Inspired by two of my favorite designs: the finger chopsticks by calvindonger and the bag clip by neoyarus , I decided to make a single device that combines both functions. This is the result. Can be used to clip the bag of your favorite…
Wydruk około 1,36 €–1,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A full-sized pair of print-in-place chopsticks for inexperienced and impaired users as well as children. In order to work, the chopsticks require a rubber-band that pulls them together. (see photo) By using different length rubber bands…
Wydruk około 1,06 €–1,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Organize your crafting essentials with the Gridfinity 5x2 Holder, specially designed for Bosch Gluey and spare glue sticks. This holder provides a neat and accessible storage solution, ensuring your glue gun and extra supplies are always…
Wydruk około 10,22 €–12,49 € nettoWstępna wycena jednego wariantu
It is a stand for the official Lightstick of (G)I-DLE. It was printed in white PETG. The lightstick fits in with the ribbon.
Wydruk około 3,06 €–3,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple Holder for nordic walking-sticks. Can be srewed to a wall.
Wydruk około 0,14 €–0,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
With these extensions, you are able to use the switch controllers in PC FPV/drone simulators (like LiftOff). This increases the precision of the movements. In addition, a small part named shifter rises the right hand side controller to…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
to sushi
Wydruk około 0,58 €–0,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
3D-printable Ergonomic Marcosticks that work. See it on Youtube. Ergonomic Marcosticks (model E) are favored by intermediate users. They look almost indistinguishable from plain marcosticks, thus do not invite unwanted stares at eating…
Wydruk około 1,47 €–1,80 € nettoWstępna wycena jednego wariantu
These food identification sticks are designed to help guests with allergies or dietary restrictions easily identify dishes at gatherings. Simply insert the sticks into the plates to clearly label the food. This eliminates the need for…
Wydruk około 0,47 €–0,58 € nettoWstępna wycena jednego wariantu
Mini shelves to sidemount the Harman/Kardon Soundstick speakers onto a standing desk with a metal frame and a glass top. The tabs stick into the space between the glass top and the metal frame. I added thin, sided tape on the top part of…
Wydruk około 3,25 €–3,97 € nettoWstępna wycena jednego wariantu
Hi everyone this is a finger chopstick I made. It has offset teeth for better grip of small objects.
Customized version of https://www.thingiverse.com/thing:2404850 , with added labels on top, to show the grit of sandpaper used. They go from 80 to 3000. If your sandpaper is a different grit, there's a blank top template provided. With…
A simple yet elegant chopstick clip. Keeps chopsticks aligned and secure before, during, and after use. A discreet acces
I like the Finger Chopsticks from @MrDaedelus but they often slip from my fingers. It's also not possible to strech the chopsticks so i made a modded version. Normal: Diameter of the finger rings is around 22mm or 0.9 Wurstfinger. Small:…
I saw something like this at a restaurant and was able to make a similiar item for use at home. The print works well out of PLA filament and the fun colors are great for kids. Print time is about 8 minutes Of all the utensil holders I've…
This is version two of my usb box. This is a box for storing usb sticks. I designed this new version to replace my old version with a better one. I use it to store my OS installers. It's a must have for anyone in system building or system…
This is a simple mechanism I made for eating snacks while playing video games, working on the computer, or doing other things with my hands. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 200…
Made the finger holds a little more robust. V2 changes: changed teeth at the end of stick.
Don't forget to like and comment. I want a joystick grip that looks cool and feels like it's the real deal. Voilà This joystick grip has been inspired by the original sidestick, which is installed in Airbus airliners. Based on this…
Finger Chopsticks. Category: Kitchen & Dining
Sticks to put on your Xbox controller to make it feel more like a drone controller.
Introducing custom 3D printed thumbsticks designed exclusively for the Legion Go handheld! Elevate your gaming experience with these meticulously crafted thumbsticks tailored to enhance comfort, control, and precision during gameplay.…
Inspired by Snactiv ( https://snactiv.life ), these are wearable chopsticks that allow you to snack without getting your fingers dirty. Perfect for when you're working, gaming, chilling on your phone, ... A sleeve is included to keep the…
Remix of the sanding stick screws for the Customized Sanding Sticks by fuchsr Customized Sanding Sticks with Labels by fuchsr | Download free STL model | Printables.com Increased the height of the knobs from 3mm to 7mm and added small…
Introduction You have a little bit of filament left so these Ribbed Sticks can be used for fixing and glueing your other projects. To prevent wasting all the small bits and pieces. The ridges make sure your glue gun can grip the stick.…
My daughter’s set of tiny toy instruments came with drumsticks sized for adults. Fortunately, the formidable forces of fabrication can fix that. Here is a set of drum sticks designed for little hands. Hopefully this helps your little…
Little Bowl to go in your hair
This sanding stick takes strips of sandpaper and holds them firmly in place while using. It also comes with customized plates showing the used grain size. Printing: Print as you desire. 0.4 and 0.6 nozzles worked fine for me. 0.2…
Model is fully parametric, download the .f3d file to adjust and size for any pair of chopsticks. Recommended to print in PETG (or PA if you've got it), model oriented on its side so the fibers run through through spring component for…
I needed a simple and lightweight front cover to protect the joysticks and the screen when traveling light, so I made one. Two versions: partial cover and full front cover: Prints as a single piece in the P1P and X1C (and any larger…
I did not make these files just sharing them on this platform. You can find the original files here: https://www.thingiverse.com/thing:2907072/files (3) Different sized craft sticks. Regular = 114x10x2 mm Mini = 63x10x2 mm Jumbo =…
Folks have created stands and cutting guides for my sanding sticks https://www.printables.com/model/22236/ but I wanted a version that integrates the cutting guide into the stand. So here it is. I also include a version for standard US…
Intro A tiny, wallet-friendly 3D-printed tool that helps you remove ticks quickly and safely — without squeezing them and increasing the risk of infection. This compact design acts like tiny tweezers to grip ticks close to the skin and…
A remix of "USB SD and MicroSD holder for wide USB sticks" by Lalo_Solo ( https://www.thingiverse.com/thing:2637487 ), with added tray for caps and other stuff.
Glue sticks holder for Honeycomb storage wall
Print the drum parts with support , Sticks without ;)
This is a two colour box. Length 8cm, Width 5cm and Depth is 3.4cm. The colour change is done at 6.40 in Prusa Slicer.
sticks for low stress Training. easy to print with rounded edges to minimize injuries to your ladies different lengths and thicknesses ---------------------------------- Sticks für Low Stress Training. Leicht zu drucken und mit…
Hi. This is my gaming chopstick model. It's long, thick, strong, and grippy. I made it in Fusion 360. Thanks! I am new to 3D printing. My print profile is on Makerworld.com, but it contains 2 plates with 2 sizes, and I added a small .1mm…
If you don't have yet the real fpv controller you can start training in a flight simulator using the sticks and your ps 4 controller. It's not the perfect solution but it will do the works till you get a real controller. Print tips: no…
This is a remix of thumbsticks for PS4. My son needed them to play Fortnite, and they seem to work well for him. The top parts of the thumbsticks are remixed from PS4 Thumbstick Mods by philbarrenger . Top parts have to be printed with…
This set of 3D printed lollipop sticks is designed as a simple, low-filament consumable for general stirring, mixing, and craft work around the workshop or hobby space. The sticks are intentionally basic, making them ideal for epoxy,…
Handy Chopsticks – Fun & Functional 3D Printed Sticks Handy Chopsticks are a fun and clever tool designed for gamers who don’t want to choose between eating and playing. Each stick ends with tiny hands that help you grab food easily…
I feel that this is a major step up for the open source Space Mouse. The current potentiometer joysticks used have two main issues: They work by wiping a metal contact on a carbon track - the carbon track will eventually wear out. There…
A remix of the sanding sticks and customized labels to be 10mm and 25mm wide. The photo shows the 10mm ones to the left, the original sanding stick in the middle and the 25mm versions to the right. They use the same printed screws as in…
These chopsticks are designed especially for enjoying sushi, but they’re also great for other Asian dishes like ramen, dim sum, or pad thai. The built-in support makes them ideal for beginners or anyone looking for a more comfortable…
Just a tool I made to get precisely sized strips of sand paper for the printable custom labeled sanding sticks
I couldn't find any sanding sticks small enough for my task. So here's my version. (6mm width) Required hardware per stick: 2 x M3 nut 2 x M3 10mm screw Print at 0.2mm with supports.
A two-part drumstick holder for vertical 1.5" (38.1 mm) drum rack tubing or any vertical tube between 20 and 45 mm. The inner diameter of the holder cup and ring is 7 cm (2 3/4"), so it can hold 6 to 8 drumsticks ( a smaller version for 4…
Chopsticks for decoration. If you want to eat with them, first cover with food-safe varnish. Its possible, the sticks were infested with bacteria, if you do not.
Having ball bearings running in metal sleeves results in a smooth action and a more compact SpaceMouse. Hall effect joysticks eliminate dead zones and enable much finer control. The only issue you need to be aware of is manufacturing…
This is for standard size popsicle sticks which I measured to be 113mm x 9.5mm x 2mm. Print a single hub to test the fit of your popsicle sticks and adjust the XY Size Compensation until the stick is snug, but not too difficult to fully…
Third set of Sonic figures based on Team Rose (and Sticks lol). Set inludes · Modern Amy · Cream and Cheese · Big · Sticks (STILL PAINTING, WILL UPDATE WHEN DONE) All my figurine and statue models will always and forever be free! If you…
Drum sticks which should be printed with stronger filliments to put up with use.
If 10's to big here is a 5. This is version two of my usb box. This is a box for storing usb sticks. I designed this new version to replace my old version with a better one. I use it to store my OS installers. It's a must have for anyone…
I modeled these after some gaming chopsticks I saw and wanted to see if I could make something similar. These are not perfect by any means but they work. They are a little weak in the finger loops, but if you print with a higher infill it…
Needed a last-minute costume for an Alice-in-Wonderland party. These let me create a crazy hair style to go with a red and black suit. They are quite chunky. I scaled them down to be 19cm long and they still could have been skinnier.
This holder can allocate 8 wide USB sticks, 8 SD cards, and up to 15 MicroSD cards. Ideal for your desk, to keep your portable storage in a single place when you need them. It has holes to prevent from dust accumulation, and reduce a…
Xbox thumbstick extenders three heights 9.5mm, 14mm and 21mm. Both convex and concave versions.
More: https://www.prusaprinters.org/prints/47041-complete-truss-accessory-pack Truss can be printed with no supports, but an stl with custom supports is included. 0.5mm extrusion width, No infill, 2 perimeters, side plates 100% infill…
Idea came from convention giveaways. Theirs was too small. Created this one for larger fingers.
a way to not get your finger or mouse dirty
Contour duplicator with wooden ice sticks Simple tool to use with wooden ice sticks 114 x 10 x 2 mm. Partlist: 2x ISO 4762 - cap screw - M3 x 12 2x ISO 10511 - self locking nut - M3 Model printed with: Prusament PETG prusa orange
Chop sticks and case was printed on Bambu X1 Carbon at 0.16mm layer height. I suggest printing the chop sticks in food safe material (I used wood PLA with a food safe varnish) at 100% infill. The case can be printed at 15% infill.
Stand for cotton swabsticks and discs
A small helpers for sushi sticks . They work with a premium sticks and cheap "to go" ones. Printing Notes Print in PETG (best flexibility) but PLA will work too. Try with auto supports in holes for sticks. Quick, simple, and practical…
Chopsticks holder with Japanese symbols - Mount Fuji, Bonsai, Torii gate, Rising red sun, Katana holder You can print the relief in one color or in multi-color, I added g-code for multi-color printing You can find another Chopstick holder…
Print it in 0.2 Layer You need 6 Magnet 10/5/3 and a Rod 4mm diameter and 80mm long
I searched high and wide for a replacement stick for my Lenovo Legion Go that was both easy to print with minimal Supports and comfortable to use. While there are some decent options already out there, they weren't really what I was…
Simple hair sticks inspired by huntrix and saja boys logos. printed great in pla and petg. works well with single color printer. I paused and swaped colors for a few different versions of each. 1 version of saja boys, 2 versions of…
This is a holder for 4 hickory drumsticks of size 5A (which is my favourite size), but it can also hold slightly thicker drumsticks for example 3A. And because I usually forget my drumkey, I included an emergency key. As it is a plastic…
mini hockey sticks right and left hand
A few simple candelsticks (modelled in Fusion 360 for my Christmas Book Nook)
Protect gimbals and front sticks. New version with upper stick protection! Assembly the two parts with pressure, once in right position the upper part rotates freely. Insert the gimbal protection first, then rotate the other part: on the…
Newest addition to the bat family arsenal, Nightwing's escrima sticks, grom the game gotham knights this was based on a mix of concept art and some of the ripped game models concept art source here modeled this in as many pieces as i…
This is an improved design of the Gaming Chopsticks. The model has been properly redesigned in CAD (the original has some artefacts and inaccuracies), while also adding several improvements. Changes include: - wider finger support for…
Holder for 10 USB, 6 SD Cards, 16 MicroSD Cards. no_warp.stl to prevent warping of the bottom layers Print Settings Rafts: No Supports: No Category: Organization
There are no special requirements for printing the model and it can be printed with PLA.
High accuracy thumb sticks improve game performance by 10% when playing various games
Print extension sticks for your DJI Smart Controller! Extra length = better accuracy when controlling drone or gimbal movements. These fit directly on top of your existing sticks, with a snug fit. Can be removed and put back on later for…
A two-part drumstick holder for vertical 1.5" (38.1 mm) drum rack tubing. The inner diameter of the holder cup and ring is 5 cm (2"), so it can hold 4 drumsticks ( a bigger version for 6–8 drumsticks is available here ). It clamps onto…
This is an extension of the set introduced by Customized Sanding Sticks with Labels ( Thanks Fuchsr ! ). In order to make the set on the included photo you can e.g. purchase set(s) over here…
This is a fidget that you can put on your key chain to add some personality, or keep as a standalone toy. It can be easily customized through your choice of the different provided STLs, or even further by using the provided blend file.…
I lost the thumb stick to my Odin 2 and didn't want to pay $10-$30 on etsy to buy a set so I designed my own and they worked out great. My sticks are 2mm taller than the original to give you a little extra control and for the taller ones…
Three storage boxes based on the Gridfinity 2x1 footprint for: 12× USB sticks 7× SD cards + 2× SD card cases + 8× MicroSD cards 2× Sony Alpha A7 batteries Drei Aufbewahrungsboxen auf Gridfinity 2x1 Basis für: 12x USB-Sticks 7x SD-Karten +…
The thread is set to fit 3/4" ACME (see pictures), wich is a standard broomstick thread at least in europe. The thread has been carefully set though a LOT of dimension iterations. A simple version is uploaded to edit. A 120º full bracket…
