240 modeli
Ryobi 18v Toolholder with retaining clip. Suitable for most Ryobi 18V handheld tools. Parts can be printed in place if using the same colour. Minimal support needed under the clip and under the housing area where the clip assembles. You…
Wydruk około 6,29 €–7,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Fits my Tooltray for Lathetop . Pressfit - if loose glue in place. See also additional Hexkeyholder
Wydruk około 0,14 €–0,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I decided to make a toolholder that simply clicks on the frame and rests on the power unit. It holds all the tools that comes with the printer kit! I also added room for a key that I use for nozzle changes. so there's room for 4 alan keys…
A toolholder for Thermomix accessories for the TM 5 but it should also work on the TM 6. Feel free to make a remix. If it does not fit on your printbed then split it into 2 parts with the step file and glue it afterwards together. On the…
This is a tool holder for Makita 18V tools. I have developed it on a normal holder. My recommendation for the print settings: Material: PETG Layer: 0.2mm Nozzle: 0.4mm Supports: Yes Alignment: Makita Logo upwards Legal information: This…
The tool holder is made for Creality Ender 3 V3 SE 3D printer. Two variations were made, both to be installed on the left and right sides.The support is fitted with pressure, it requires a little force and the fitting measurement of…
After my first and second toolholder collection, here is the third one. This one contains storage for drills, taps, dies, and countersink bits . All trays have a height of 3 units and are not stackable . (You may put them on top, but not…
Print with PLA, no support, i printed it with 4 walls. The Gripper is not perfect but holds tight.
Print in PETG and keep the walls plentyfull. Enjoy and happy printing
I changed the hole for the spade. Because at the TM6 it´s a bigger version. And I add a O-Ring 3,5x85mm that it fitts better. I had the problem that the holder has not held well with me at the Thermomix. Now it´s fitts perfect at my TM6.
Es handelt sich hier um ein einfach zu druckendes Modell für einen Werkzeughalter für alle relevanten Werkzeuge für den Prusa XL. Ich habe es aus PETG Prusament Orange gedruckt mit 250°C. Kein Support benötigt. This is an easy-to-print…
Stl - Daten des BOSCH GWS 12V-76 Toolholder aus Thingiverse Link: https://www.thingiverse.com/thing:3971430 Danke an das Original. Ohne Support gedruckt.
An HSW organizer for Creality K1 tools.
Update: I added two support arms for better stability. The arms in Version v11 are a little bit shorter. I split the design in two parts and made holes for M4x20 srews. Prints without any supports. Updated version also has some chamfers…
Toolholder for Milwaukee M18 machines - Remove the battery and mount the machine The model is mounted with four screws. One model for machines with beltclips and another for macines without From my experience the following settings are…
Modified for allan keys, wrenches and needle for unclogging the nozzle.
Multi Toolholder for Skadis and HSW (drill/bit/allen) In this download you will find two Versions. One for IKEA Skadis, and one for the HSW Honeycombe This Toolholder will give you 19 slots for Drills (1mm-10mm 0.5 steps) 31 slots for hex…
This a Collection of three Holders ! https://www.printables.com/de/model/500721-original-prusa-enclosure-steelsheetholderdruckplat https://www.printables.com/de/model/504312-original-prusa-enclosure-bottle-and-glueholder-fla
A simple print to hold all the included tools and accessories
I remixed the tool holder from SixtyFourWarrior to fit my needs. This version is a little bit less wide and in addition I added space for my tweezers and a side cutter. The X-Tool can be hung next to the scraper as well. To be able to…
A fairly simple Toolholder for the standart 3 Tools/Attachments for the KitchenAid stand mixers. even though i tried to design it to be as printable as possible, there are 3 little spots that need a bit of support. other than that it…
This is a remix of another model, but that model did not fit my unit, so i changed the attachment point to fit mine. its a tight fit onto the printer but you should be able to get it on if you set the bottom notch first and then lift the…
This model is made to hold every single tool and item you got with the purchase of your ender 3 v3 se, but since most of us also expand our toolkits elsewhere, I wanted to make this toolholder customizable and versatile. There are premade…
Just my version of a simple tool holder, that fits the MK3. It can hold most tools as provided with the Prusa i3 MK3 kit and some more like a spatula and two pliers
I designed a tool holder for the Sovol SV06. This mounts on the right side of the printer with the two supports glued to the tool holder. EDIT - 18.12.2022: Smaller supports fit into the holder. EDIT - 15.01.2023: Improved feeds for the…
Thermomix TM6 Holder - Remix - Original Creator: <Click> Cut in 2 Parts and now screwable with 2 M3x20mm Features: -No Supports needed -Stronger than the Original One because right Print Direction -2h Print on a Bambu Lab X1C instead of…
None of the available versions satisfied me, so I designed my own toolholder. Has space for all the included tools (2 nozzle assemblies, the side cutter, the alan keys, the screwdriver and the nozzle unclogger), a cheap deburring tool…
designed for 500g hammer useable deep 28mm distance between hooks 33mm You need to use the mountingplate “4 Hooks.3mf” or “3 Hooks.3mf” from original model
Parametric Multifix type A Toolholders: Standard tool holder: MultifixA_Holder.stl V groove tool holder: MultifixA_VHolder.stl Dial Indicator holder: MultifixA_DialIndicatorHolder.stl Concentricity Pusher Holder:…
Printed in petg at 0.2 mm layer height, two parts are held together using m4*16 bolts and M4 nuts, the base is attached to the wall board using suitable M3 screws. Nuts are inserted in the wall bracket at 8.8mm using a filament colour…
Just another toolholder. I designed it for my Platsa enclosure and its possible to use without screws. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0,3 Infill: 10% Filament: Prusa PETG PETG…
This holds pretty much everything that came with the Prusa XL. Included the scad file that remixes it. To run the scad (and make your own mods) you will need the original STL and the tweezer bracket pressfit STL, so I included the latter.
0.3 layer height Only a little part need support if wall side is on printbed.( best postion for nice fillets ) 20% infill 60 - 80mm/s printspeed.
If you want a single part to hold all your different screwdrivers, this is for you! This part can hold screwdrivers with a diameter from 1mm up to 8mm or more. It also works for files. To put your tool onto the wall, just use your tool to…
Additional part for the IKEA Skadis pegboard, the neccessary brackets you can find here: https://www.printables.com/model/607371-brackets-and-trays-for-skadis-plate You need to print 2 x “mount hook span 3 holes” from the base design.
Black Tools are original, transparent are printed with resin by me (you'll find the tools in my profile) Printed and tested in ABS (Nobufil ABSx Galaxy Blue), so your mileage may vary. I added a test piece with a single holder for you to…
Holder for multifix size A holders of a Latche Mount on the wall and slide the multifix over it. PET-G ore PLA works great
A tip and nozzle holder for Yihua 8786D Soldering Station with mounting holes for adding accessories. The holes are for 4mm screws and are on 10mm centers. It holds 10 tips and 4 nozzles.
Basierend auf der Idee von « michisbarbq“ (https://www.thingiverse.com/thing:3971430) habe ich diesen Werkzeughalter so konstruiert, dass er der Maschine besseren Halt bietet. Die Löcher sind für 3,5mm Schrauben vorgesehen. Durch die…
Simple tool to assist with consistently installing the 3x8mm magnets into the INDX toolholders. Requires: M3x8 SHCS x2 Thread the M3x8 SHCS into the top half of the tool. Make sure the 3x8mm magnets are oriented correctly (use an INDX…
Toolholder for Toolholder for Parkside Hex Wrenches. You can choose the color of the letters in prusaslicer. This is made from PLA and seems to be tough enough.
Small holder for square handle picks with dimensions of 13.3 x 13.3mm at the handle. Requires supports at mounting hooks
Bambulab A1 Mini Toolholder v2
Toolholder for Toolholder for Parkside Torx Wrenches. You can choose the color of the letters in prusaslicer. This is made from PLA and seems to be tough enough.
This is a simple tool holder, compatible to the gridfinity system. It's easy to print, nothing special here.
Its a simple Toolholder for your Display. I used ESun PLA+ with a Layerhight of 0,2mm and a 5% Infill New Upgraded Version with clips on the bottom
Flashforge Adventurer 5M Pro – Toolholder This print in place toolholder allows you to store your standard tools neatly on the side of your Flashforge Adventurer 5M Pro. No glue is needed: everything just clicks together permanently. Fits…
Nice storage system for TTS toolholders. One mount can fit 5 holders, included enough mounts to fit 25 holders total.
I remixed this toolholder to fit the tools I use with my XL, with spots for: All six hex wrenches that come with the XL Both universal wrenches Tweezers Glue stick Lubricant Spare nozzles Metal scraper from an Ender 3
All you need tool holder for a small mill like 3018
This is V2 of the “linkable tool holders” that I have published previously. The updated version will attach to the Festool MFT-3 using a remixed shorter version of the Festool MFT-3 nut in the same principle as the original Festool…
Toolholder for Multifix AS for HBM 25 x 550 Lathe. Clips on the Splash Guard of ther Lathe
I have a sheet holder on the right side and the LED stripe installed. Thus, created this remix which mounts on an additional vertical screw and is mirrored for left use. This remix is inspired by the LED stripe solution provided in this…
Print with the front flat side down. There are indentations on the back to fix the toolholder using double sided foam tape. Mit der flachen Vorderseite nach Unten drucken. Auf der Rückseite sind Aussparungen um den Werkzeughalter mit…
A remix of the original tool holder for the Prusa enclosure that contains the tools I wanted. Made to fit on the top left side of the enclosure using square M3 nuts. The step and inventor file is shared here, so it's hopefully easier for…
I have an iFixit tool set that I got on Amazon a few years back. I wanted a pretty place to display/store the tools and it had to be Gridfinity-compatible so I made this. I printed it with my MK4 using some generic PLA, 10% infill, gyroid…
This is a simple organizer and toolholder for the tools and accessories that ship with an Elegoo Phecda laser engraver. Two screws are needed to mount the toolholder. There is a place for the screwdriver, three hex keys, wrench, micro SD…
Nozzle: 0.4mm Resolution: 0.16 - 0.28
This toolholder holds all the tools that come with the Centauri Carbon, and a lot more. Has space for a full standard set off allen keys, screwdrivers, the elegoo scraper, a creality scraper, a leatherman multitool, usb stick, calipers, a…
This model lets you store a AXA lathe toolholder in a 1x3x4U GridFinity box. The toolholder is modeled after a Shars 250-101, so I can't guarantee that other brands fit as well. There is just enough room for your average indexable tool.…
UPDATE: I added a v2 for better fit and less support print. Toolholder for my Enclosure Remix https://www.printables.com/de/model/971505-sovol-sv08-enclousure-with-honeycomb-storage-wall Use auto tree support
Aquascaping Tool Holder (Cabinet-Mounted) Keep your aquascaping tools organized and easily accessible with this cabinet-mounted tool holder. Large Tool Holder : 27,5 cm long - Made for 6 Tools like scissors and tweezers plus hardscape…
I dont like to change only the nozzle on the XL (i love it on the Revo) , so i prefer to change the whole hotend. So ive ordered a bunch of different nozzle sizes with the rest ob the Hotend. I also ordered some colored silikon socks to…
I wanted a small tool holder for my Prusa i3 MK3 S+ frame. My aims were simple: Holds the tools and things I use in most prints Clips onto the frame Does not interfere with the movement of the print head Does not sit on top of the power…
Made a wallmounted toolholder for the Wera Kraftform kompakt VDE big pack 1 set for one of our sideshops at work. Printed on a Creality CR-M4 in grey PLA. Walls: 5 Infill: 15% Infill pattern: Gyroid I printed it with supports for the…
Toolholder for creality ender3 v3 se with side scraper holder.
The first version of the station works for me. A friend of mine bought the same station on Ali and had some extra wishes. So a few more versions were created The last version is printable without any support but you have to apply a decent…
This is a toolholder for the ender 3
This is a small toolholder, that uses one M4 Wood screw with up to 7mm head diameter.
Remix of the side boxes with different sizes (120 mm and 140 mm length) for 2.6 kg spools. There are various tool holders that can be placed freely and positioned variably. Remix aus den Seitenboxen mit unterschiedlicher Größe(120mm und…
Werkzeughalter für feine Gewindeschneidarbeiten von M2 bis M4 wo man mit dem Windeisen nicht mehr ran kommt.
Works with: Reciprocating saw TE-AP 18Li and similar Jigsaw TC-JS 18Li and similar Multitool Varrito and similar Angle grinder TC-AG 18/115Li and similar Concrete hammer TE-HD 18Li and similar Suggestions for improvement are welcome
Trays for storing ISO30 ER 32 machine tool holder.
This toolholder can hold up to 4 screwdrivers (I got these: Princore Shop ), 1 brush, 2 tweezers and 1 pliers (I got this: Knipex ) and is mounted to the side panel screws. Feel free to remix it for your own tools :)
The original Toolholder requires quite a bit of support to print, and it leaves a rough suface on some larger areas. Since the part doesn't see too heavy loads the print orientation shouldnt matter that much. Print the two parts and…
To save myself from actually measuring the dimensions of the P1 mystery hole, I leveraged just joo' s design. I wanted to hold some specific tools, and I wanted to add some bracing to reduce the deflection of the tool-holdy part. I used…
With this universal tool holder you can store three tools next to each other. It's build for leathercraft tools. The tools have different diameter stems, but with the different sized tubes you can store them next to each other. The base…
TOOL HOLDER KOBRA 3 nozzle 4mm
to fix on bottom profile (left or right) by screw. you need: M3x8 screw (1) M3nS nut (1) The toolholder bottom is neutral (same for left and right) and can be used for different elements, like the toolholder and the waste bin. The printed…
I created a little toolholder for my drills and couple other stuff I need for work. It's suitable for drills with a diameter of 2.5mm, grinding wheels with a diameter of 39mm and 22mm, rubber wheels with a diameter of 21mm, rubber rods…
There is a small slot where this holder attaches to. Added a fusion file to change it for more/different tools. esun concrete grey is a good fit for the machines color.
Update V3 - 20251231 - Weitere Version mit Löchern Ø13mm anstatt Ø11mm hinzugefügt, dies passt besser für die meisten Zangen / Add seperate Version with Ø13mm holes instead of Ø11mm, this fits better for most pliers…
Magnetic toolholder for the Prusa Mini tools. I also shared the step file for changing the size of the magnets. To mount it to the aluminum extrusion, you need two nonut 2 mm clamps from the following page:…
Supports: Yes Resolution: 0.2 Infill: 10%
Simple wall mounting bracket for storing Chinese 250-000 series lathe toolholders (such as https://www.arceurotrade.co.uk/Catalogue/Machines-Accessories/Lathe-Accessories/Tool-Posts/Model-000-Quick-Change-Tool-Post-Set ) I believe these…
Tooltags SK50 toolholder, for every standard SK50 toolholder, for when you need to print out a label with lenght/width, or just write down the toolnumber/etc. Made for labels from a dymo label printer. Easy/quick print, i've used PETG…
Printed at 0.2mm layer, 3 walls (like al multiboard parts), 15% infill (PETG). original design is from: https://www.printables.com/@tlisek_2060345
Размеры посадочного места на картинках. Печатал АБС пластиком, заполнение 15 процентов. Можно печатать и другим пластиком, усадки будет меньше, просто садится будет плотнее Быстросменный резцедержатель, AXA QCTP 250-111 250-101 for WM210.…
I used this simple sliding clip for storing AXA toolholders behind my lathe. The holders slide along 1" (25mm) aluminum extrusions. This was my first print after building my Prusa. I printed them in draft mode, 15% infill and raised the…
Tooltags SK40 toolholder, for every standard SK40 toolholder, for when you need to print out a label with lenght/width, or just write down your toolnumber. Used PETG because the PLA i used before disolved in the coolant.
Toolholders designed to bolt tools in a metal 40x40mm frame and allow clearance for a frontal door.
I liked the design by @AHPrusai3MK3SKit but sadly discovered that it doesn't fit the MK4S frame, so after a very quick tweak in Tinkercad we get this. Print settings:- PLA 0.2mm Generated support material with auto generated supports…
I wanted a bit bigger of a toolholder as well as a small spool for tape rolls and a different compartment set up.
Scraper for Original Prusa Enclosure Toolholder (but feel free to use it without the toolholder ;-) ). This scraper fits into the scraper opening of this toolholder:…
As I saw the other mods to fill the gap between the LCD screen and the frame of the MK4 I thought this might be a great place to store my tweezers as they are my most used tool. The space is exactly the right size and just needed some…
Toolholder designed to improve the workflow on my newly acquired K1 MAX, the “right” version is meant to be installed on the right side of the machine and so on. The installation requires a double sided tape as the part is developed…
I designed some toolholders to clean up the mess on the lathe gearbox and give some room for drawings and measuring tools. this is for type A toolholders. Printed in CF Nylon, never tested in other materials. Print Settings Printer:…
Tool holder for standard tools that come with Voxe lab Aquila. 5x Allen key 2x Screwdriver 1x Scrape 2x Spanners 1x Sponge with nozzle needle Also holds 1x cutters 1x glue stick 1x needle tube Suggest slicing main holder with top on…
![[ REMIX ] Original Prusa Enclosure toolholder (LED stripe compatible, mirrored)](https://media.printables.com/media/prints/554974/images/4457989_f96586f8-1391-49f7-b657-7d8caab999ca/img_2848.jpg)
![T 12 Soldering Station Rack [modular] with Spool- and Toolholder](https://media.printables.com/media/prints/383501/images/3271587_ba0074e6-bf75-4bad-bb6a-b7af1d52c6c9/2023-02-06-14_27_57-autodesk-fusion-360-personal-not-for-commercial-use.png)
