3777 modeli
Case for Raspberry Pi 7" Touchscreen and Raspberry Pi 4 *** New case for Raspberry Pi Touch Display 2 *** Updates Alternative top case part with additional slot for camera ribbon cable, see subfolder "case top v2". Features Internal fan…
Update 25/08/2023 v1.2 added - access for heat break setscrew created, small amount of material added on the fan-side of the grille near the bottom to ensure proper clearance to heatsink fan. Update 11/04/2023 v1.1 added - probe bracket…
I wanted a wall mount that would hold the Quest 3's controllers without risk of them slipping out or getting damaged. Settings used: Layer Height = 0.20mm Walls = 3 Infill = 20% Supports = On Brim = On Small amount of support required for…
LCD cover that works with the awesome Hyperpixel 4" touchscreen. No fitment issues from other similar covers. This is for: MK3/MK3S/MK3S+ Letters stl is also included if you want to make this a multi color print. Update 2021-02-06: I made…
This version is fixed to the Ender 3 v2 X-Carriage using the two upper roller wheel screws instead of the BLTouch mounting holes. Remixed from: Biqu H2 Mount + Cover - Ender 3 CR10 https://www.thingiverse.com/thing:4740250 BIQU H2 Ender 5…
Modular print head ASSY for Kingroon KP3S 3.0 with Titan Extruder and 4010/5015 fans. Notes on Model Files Please download just the STL file of the 5015 fan shroud from the “KP3S — Modular 5015 Fan Shroud — Kingroon” page. This 5015 fan…
This is somewhat a remix of a remix. Crosslink did a remix for the Ender 3 V2 of 3D_LC's mounting plate . I didn't like to use the roller screws to mount this neither did I have any use for the cable routing channels as they can only be…
LCD panel that works with the awesome Hyperpixel 4" touchscreen with Raspberry Pi4. This is for: MK3/MK3S/MK3S+ and Pi4 Yet another remix of the 4” HyperPixel cover for the Prusa MK3S+ for the Pi4 to be used with Octoprint and Octodash.…
This is a replacement LCD cover that provides a mount for the excellent 4inch HyperPixel capacitive touchscreen. The screen slides under the holding clips snugly, gently bend the part to slot the screen under the second set of holding…
*** New case for Raspberry Pi Touch Display 2 *** Required models from 7" Touchscreen case for Raspberry Pi 4 + internal fan Display case >> rpi4-display-case Stands >> rpi4-stand Fan mount >> rpi4-fanmount Print instructions See 7"…
After receiving a Creality Sprite Pro extruder to upgrade an Ender 3 Pro printer, I found that my touch sensor was hanging just below the hot end nozzle. I found several models via Printables and Thingiverse but could not find one I…
Plate mounting bracket for 7" Touchscreen case for Raspberry Pi 5 + slim version , 7" Touchscreen case for Raspberry Pi 4 + internal fan or 7" Touchscreen case for Raspberry Pi 3 (B/B+) + internal fan . Features Thread inserts Display…
Case for Raspberry Pi 7" Touchscreen and Raspberry Pi 5 *** New case for Raspberry Pi Touch Display 2 *** NEW: Alternative slim version for the new Raspberry Pi Active Cooler Required models from 7" Touchscreen case for Raspberry Pi 4 +…
The Flexible camera mount for Ender 3 Pro by Meganoodle would not work for me, as my CR-Touch module would interfere with the printers ability to use the X-axis Z-stop switch. My version uses another method to clip on to the X-axis motor…
Used to mount the hyperpixel 4" touchscreen display alongside the MK3S LCD outside the lack enclosure. I used a raspberry pi 4, no cable extensions needed for the prusa lcd screen. Line the bottom of the mount base flush to the bottom of…
The shown rollbar frame was sliced using the standard 0.15mm settings from Prusa Slicer and printed using Prusament PETG. The left and right side were printed separately without any support. If you are advanturous, you could try the…
Stand for Raspberry Pi 7-Inch Touch Screen Display
V-Slot profile 2020 mounting bracket for 7" Touchscreen case for Raspberry Pi 5 + slim version , 7" Touchscreen case for Raspberry Pi 4 + internal fan or 7" Touchscreen case for Raspberry Pi 3 (B/B+) + internal fan . STL-Files for…
Użyj metalowego drewna crtouch, które znajdują się w zestawie z interfejsem.
Simple bolt used to hold the screen in place for the Gaggiuino
Re-modelled and extended to cover the battery hat I use.
Este archivo es un reajuste al original que encontré en internet, puede usarse tanto para BLTouch o para CR-touch, yo lo tengo montado en dos de mis Ender 3 Normal. datos adicionales: offset is x= -53 y= -15
I made this case because I could not find one that fits my needs. I use this setup for a beer fermentation controller, for this reason, the current version only has an opening for the micro USB connector and another opening for the 1-Wire…
Touchscreen stylus with hanging loop
Riffing off SnazzyLabs original idea, I wanted to make my own version with a clickable key. I ended up with a three-piece thing: The first thing is the base, where the logic board sits. I used two M2 H4 threaded inserts that I slid in…
A mount for Elecrow 5" touch display for raspberry pi ( https://www.amazon.com/dp/B07FDYXPT7 ) suitable for use with octoprint/octodash or other purposes. This is a remix of my console for the Adafruit 5" touchscreen with mounting points…
A 45° case/stand for your 7'' Eviciv touchscreen and Raspberry Pi. This touch screen with HDMI can be found on AliExpress under a lot of different brand names. There's a lot of spacing for cables (you'll need HDMI - and USB to power the…
This is a basic refill cap for a Dettol NoTouch cartridge. It is designed to cover the entire top of the container. This way it is possible, to cut a hole in the entire bottom of the the refill cartridge, and the cutting does not need to…
UltraPro one touch TCG cards stands and wall mount New version of TCG display is available collection https://www.printables.com/model/1490952-multiple-tcg-sports-cards-wall-holder-and-display Wall mount and stand for Ultra Pro One Touch…
Only a remix of the E3d mount you can find in the assembly instructions. I didn't have the Revo Micro on me yet to test the print, but I already printed the parts. I was to hyped for the Revo, so I had to design something for it.…
Summary This is an alternate Display/Control Panel for the PRUSA Mini that supports a HyperPixel 4 touch screen to the right of the stock LCD. I wanted a high resolution display that would support Octoscreen. The height of the HyperPixel4…
Great simple design for the Osoyoo 5" touch screen allowing you use easily use Octodash. This stand can be used upright or up-side-down allowing a 5-degree tilt or a 51.842-degree tilt. Instructions: Attach the ribbon cable to the screen…
This is a desk stand for the “TouchBar” generation of MacBook Pros to run them in clamshell mode (i.e. with closed display). This should fit any 13" and 15" MacBook Pro with TouchBar (including the M1/M2 13" models). It will definitely…
The touchscreen stand from McMatt ( https://www.prusaprinters.org/prints/15208-raspberry-pi-touchscreen-stand ) is great, but unfortunately only for one orientation of the screen. I have adjusted the support lip of the screen and the…
I needed a simple touch sensor case. I probably over-engineered it a bit, but I really wanted most of the “touchable” surfaces to be printed on the bed so they had a nice finish to them. I also knew that I would be using Dupont connectors…
This is a mount to attach the Waveshare 7.9" capacitive touch display to the front of a Voron 0.2 (it may also work for the 0.1 or 0 but since I don't have those I can't confirm that). The mount points are designed so that they don't…
cruise control for bikes without it, for 22 mm handlebars but you can scale it. i have not printed it so i dont know if it will work in pla. i reccomend putting some tape or something rubber on the handle bar to not damage it.
Basically took a Satsana duct for a 5015 fan, modfied it to be able to hold a BLTouch + BMG Direct drive extruder on top, aswell works with most Creality machines, I designed it for a CR10 This version is for the mellow mosquito hotend,…
its a little tool for people that need a holder for their hammers on their belt. i printed in 02mm and its quite strong. it does need support under the clip because its not down to the ground due to a math mistake that i have not fixed it…
I made a remix of the great design of E-Raw “Rasperry Pi 7” Touchscreen & Rpi 4B Enclosure mount" to fit my prusa enclosure. My prusa enclosure is based on 2020 profile and 3mm panels. I would like something which can be fixed on top and…
A mount for a 5015 fan in combination with a correct adjusted fan duct. Its made for Artillery Sidewinder X2 (maybe it is also compatible for X1 and Genius Pro). It's made of 2 parts - a front and a back part. Both are easy to print (but…
I wanted to mount my Raspberry Pi 4B including the original Raspberry 7 inch display in our garage on the wall. I searched for a specific casing and found the design “Raspberry Pi 7 Inch Touchscreen display case” by luc_e (…
Items needed: Raspberry Pi 3 or 4 Raspberry Pi 7" Touchscreen HiFiBerry DAC2 Pro XLR Some plastic threading screws or you could add threaded inserts whatever you prefer. Easily adaptable for other DACs by modifying the connection box.…
This model fits well into the profile of the Prusa XL next to the spool holders and beside the printbed. I created this sign as a flexible safety feature for a Prusa XL in a public educational institution / maker space. It can easily be…
Le streamdeck est utilisé avec des adolescents scolarisés, en situation de handicap. La précision gestuelle est parfois délicate. Le guide doigts permet d'éviter de taper deux touches proches en même temps. Réalisé en PLA, remplissage 15…
This Screen protector for the Sovol SV06 Plus is designed to sit with in the depression with out actually touching the screen. The design is otherwise identical to my previous modal. Printed in Silver, Black, Blue, & Red PLA The gCode…
WATCH IN ACTION: https://youtu.be/DJhv8JvJUME WHY: This was made to be able to touch objects such as buttons or electronic screens that might have been in contact with bacteria or viruses such as COVID-19. With research such as…
Here some more runway modules. I pumped up the runway tiles to 175% in width (175mm x 175mm) and 125% in height (2,5mm is stable enough) to fit the 1:144 airplane models for playing. Settings Value Infill 15% Perimeters 2 Layer Height…
onShape project link: https://cad.onshape.com/documents/1894d02ecaa4b2414941a4ef/w/b753588c5f0c2a7336bb1dcd/e/ee97b6d37c0dfa6069f73359?renderMode=0&uiState=68fc0399350226304e6edf3d Brother P-Touch E550W label printer case clip.
trying different tools helping not to touch buttons and levers. the touchless carabiner looks promising, but it was too small for my hands, so i increased it to 110 %. Print instructions see gcode file below - no supports, no rafts, no…
Don't throw your money on expensive refill items and enable you to refill using unbranded soap instead by drilling one arbitrary sized hole and after refilling cover it with this lid.
I was modding an Ender 3 and realised the stock mount that came with the BL Touch didn't fit with the micro swiss direct drive and satsana fan shroud upgrades, so I put it in CAD and redesigned it to be thicker (so that I could 3D print…
As the human hand reaches down a supportive hand reaches up. I was inspired by “The Creation of Adam” painting by Michelangelo. To me it looks like the 3d printing god is reaching out of the bed to hold a human hand. What do you see? The…
Yet another Printable spacer kit for the BLtouch. They are stackable. 1mm = 1mm 2mm = 2mm 3mm = 1mm + 2mm 4mm = 4mm 5mm = 1mm + 4mm 6mm = 2mm + 4mm 7mm = 1mm + 2mm + 4mm 8mm = 8mm 9mm = 1mm + 8mm 10mm = 2mm + 8mm 11mm = 1mm + 2mm + 8mm…
Simple frame and stand for a 7" touchscreen display that cleans up the look of an on-desk presentation. This print is three parts. While the the two part frame could be printed without the stand, there is a spine on the bottom edge that…
A replacement mount for the Ender 3 LCD. This will allow you to replace the original LCD with a 3.5 inch touchscreen that can be controlled by a raspberry pi. Works great with KlipperScreen and OctoDash. NOTE: “VORNON” name and logo added…
The TC420 and TC421 are very nice and relatively cheap LED controllers for fish tank / aquarium lights. However, there is no cover at the connections, so I created a two-piece cover. The lower part will be screwed in permanently. The…
This design modifies the original one in order to have a maximum height of the case below 90mm (useful to place it in front of a Voron 2.4). Added support legs to it, but they will block your ethernet port (in case you use it). Can be…
My 3D-printer is connected to a socket distributor with switches. To protect the switch against unintentional touch, I designed this protector. It has to be glued around the switch.
Wall mount for Pentair Remote
To save some space, I designed a small pedestal so that the Sagrotan No Touch soap dispenser can stand on the edge of the sink. The width of the sink edge is 36 mm, and the slight incline of the wall was taken into account in the design.…
This is a 0.8 MOD gear 60T & 65T for the 2.5" & 3" Feather-Touch focuser of Starlight Instrument, that is intended to be used with Tilta Nucleus-M wireless lens motor (https://tilta.com/shop/nucleus-m-motor-kit-i/ ) for wireless focusing…
Updated SUN 23 JUL 2023 I gave the second version to my mother-in-law for beta testing this morning. I ordered some suction cups (they come tomorrow). and updated the base to have six mounting holes for the suction cups – those designs…
A holder to mount a Brother P-Touch label maker to a Flexispot peg board.
Remix of LCD cover (for MK3S+) to fit to Hyperpixel 4" Touchscreen + LCD + Raspberry Pi4 (model without power button - see: https://www.prusaprinters.org/cs/prints/70062-hyperpixel-4-touchscreen-lcd-raspberry-pi4-without ) - it is done…
Remix of LCD cover (for MK3S+) to fit to LCD on model for Hyperpixel 4" Touchscreen + LCD + Raspberry Pi4 (model without power button - see: https://www.prusaprinters.org/cs/prints/70062-hyperpixel-4-touchscreen-lcd-raspberry-pi4-without…
Required parts 4 screws for mounting (4mm diameter) anchors adapted to your wall Model The big part on the bottom hides the cables. Print instructions The plate is separated into two parts to fit the Mini+ plate. It can be printed using a…
After getting lose speaker holes on the cover i decided to design those PETG slot to make the speaker holes stronger as the cover is flimsy and makes the holes not straight. Print them not too fast as they are small, then glue them with…
I bought a compost caddy that hangs from the mother bin but with the model of mother bin I bought it didn't fit. I printed a replacement handle with a lip of it so that the compost caddy can hang on the front. The mother bin I have is the…
This simple learning device is designed to help toddlers understand how parts fit together through hands-on exploration. By using different shapes and connections, children learn basic building concepts, spatial awareness, and…
Sick of auto bed leveling issues? The MAXPROBE backplate fixes them for good. Your printer should have come from Creality like this. Features Easy to install - takes just 10 minutes, no cutting wires or soldering needed Uses all original…
Overview A simple enclosure for the xtouch P1P/S interface by xperiments: https://github.com/xperiments-in/xtouch This version houses the ESP32 touch screen in a way that replaces the standard printer controls, but swivels up out of the…
Make sure to choose the correct plate version for your funnel (plate_GC_revised or plate_GCP_revised) Fasteners (to attach touchscreen housing): 2 M4x10 button-head screws 2 M4 nuts Loctite 242/243 or equivalent Recommended Print…
These cabinet knobs are pleasant to the touch thanks to spiral narrow ribs all around. There are five basic shapes (3 bigger and 2 smaller) in the back-mount version (A1, B1, C1, D1, E1) and same in the front-mount (A2, B2, C2, D2, E2)…
3DCREATION This is a remix of Satsana fun duct optimized for use with stock fans. UPDATE --> VERSION v2 WITH MORE SPACE FOR X ENDSTOP Main benefits of this model: no need for support easy to print weight 60 grams ready for…
Easy to print solid Raspberry Pi 2 or 3, Official 7 inch touchscreen case. I wanted to keep the black bezel look of the screen and not making it bigger. You will need 4 M3x6 or 8 screws to secure the back cover. There is room inside for…
This is a replacement backplate for the Creality Ender 3 S1/S1 Pro Sprite Extruder that moves the CR Touch probe inline with the nozzle on the Y axis producing a zero probe offset. Many people are having issues with automatic bed leveling…
This model was originally posted on thingiverse by me and is still available there if you want to read through the many comments and questions. This is a remix of the Satsana fanduct by eric-anastas for the purpose of mounting it on the…
A simple cover for the SAGROTAN soap dispenser. By the way, you can find a shelf for wall mounting in my 3D models . IMPORTANT: YOU ARE NOT ALLOWED TO USE MY DATA FOR COMMERCIAL PURPOSE (E.G. for your ETSY or EBAY) WITHOUT MY CONCENT.…
Fixing the CR Touch Error on Creality 3D Printers Hello everyone, Recently, I encountered the common CR Touch error. After extensive searching on the internet and trying all the suggested solutions, I unfortunately didn’t achieve any…
Special features The Extruder Fan Cover can be removed independently (no need to also remove the BLTouch mount), thus maintaining the probe Z offset Optimized cable placement. Small and sturdy design. Updates 3 February 2023 - Lowered the…
I needed a holder for my Brother P-Touch H100 to mount it to the wall or the side of a cabinet. As I didn't want to drill holes into the furniture I designed it with a hook that can be attached to the side of a cabinet - or as in my first…
The CAD files and renderings posted to this website are created, uploaded and managed by EA3D community member. This content and associated text is in no way sponsored by or affiliated with any company, organization, or real-world good…
Apple introduced the Magic Keyboard with Touch ID in 2021 for Apple Silicon computers rocking an M1, M2, etc. That's all well and good, but for those that preferred keyboards that are actually good, many resorted to taping Apple's…
ESP32 2.8inch Touch IPS CYD LCD Screen Case I recently purchase this screen from Ali Express. It has a very unimaginative name "ESP32-2432S028R" which makes it hard to find. For that reason it is also known as the Cheap Yellow Display CYD…
Reference model of the 7" Raspberry Pi Touch Display 2 based on the official drawings and measurements of sample unit. Provided in Solidworks (Original), STEP, and STL (with and without a Pi 5) Pi 5 model is not mine, it is from Elecrow .…
This stand is loosely based on some other simplistic designs I've seen for the original Touch Display, but it is based on the new dimensions of the Touch Display 2. It is a simple leg design that you print twice, and it has a cutout in…
The silicone tube/cartridge/cartouche cap helps silicone is not drying after usage See also the version with protector for cartridge and applicator: https://www.printables.com/model/1135314-protector-for-silicone-cartridgecartouche-applicat
This is the mount I designed to house a Raspberry Pi and display in the wall to control my Smart Home. The idea was to get a flush, professional-looking installation that makes the display feel like it was always part of the wall —…
I really liked Johnny_Lawrence's design for a PSA stand, its minimal, quick printing, and looks nice but CGC slabs are a bit wider and I wanted a matching stand. I modeled this in Fusion 360 using Johnny_Lawrence's PSA stand as a…
This is a set of different-sized touch screen pens for resistive touch screens. Uploaded right now are models with tips sizes 2mm, 3.5mm, and 5.5mm depending on your specific need. All designs are 110mm long and have a hole on the end for…
The screen is held into the housing using 4 m2.5x8mm socket head cap screws. The housing attaches to the Voron 2020 rail using the default m3x8mm socket head cap screws. This screens screw pattern is too wide to accommodate the default…
Basic Description This is a remix of a CR-Touch mount. https://www.printables.com/model/255096-sprite-extruder-ender-s1-pluspro-cr-touch-mount-fo I redesigned it for my Ender 3 S1 Pro. Reasons for remix The original had its X-offset…
These models have been derived from the existing designs by Voron Design, thanks so much to the Voron Design team for the massive effort put into these excellent machines. Centralised BLTouch mod for Voron Afterburner (AB prefixed x…
Display case and stand for Raspberry Pi Touch Display 2 and Raspberry Pi 5 I have not tested with a Raspberry Pi 4 - it might need some tweaks so if this design is popular I'll do one that fits a Raspberry Pi 4. Easy to assemble - just…
Introducing the redesigned xLCD cover, seamlessly integrating the display flush with the front face for a sleek look. Equipped with a next-gen RGB LED diffuser and compatible with default Prusa xLCD printed supports. Tested on various…
This is a gridfinity native Brother P-touch TZe Label Tape storage box. This can store tape cartridge larger than 12mm.
This model is also editable on Tinkercad This model is only for the TKL keyboard (the one without a number pad), if you have one with the number pad, the circuit board will not fit into this box. !!! C plate must be printed with 0.1mm…
You shoul use a 4 M3x10 screws to secure a screen to the case.
This thing is a reference model of the Official Raspberry Pi 7" Touch Screen Display. The parts modeled in this thing are available here: *This site contains affiliate links for which I may be compensated Official Raspberry Pi 7"…
