1019 modeli
This is a trident for Dummy 13. It's about 150x30mm and 3mm thick. I recommend using the “0.15mm Speed” profile in Prusaslicer, no changes needed. Also check out the rest of the arsenal I made, the files can be found on my profile :) If…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
Those spacers offset the top of the leadscrews by 13mm and reduce the depth of stepper mounts main hole. On my 250mm Formbot Kit, the leadscrews are a bit too tall in my opinion because the top of the front leadscrews can be hit by the…
Wydruk około 3,66 €–4,48 € nettoWstępna wycena jednego wariantu
Coin with the Ukrainian "tryzub" engraved in it. Uses art from PublicDomainVectors.org .
Wydruk około 0,19 €–0,24 € nettoWstępna wycena jednego wariantu
Superpinda near hotend for voron afterburner, stealthburner.
Wydruk około 0,63 €–0,77 € nettoWstępna wycena jednego wariantu
IMPORTANT Please download the "BentoBoxV2 2023XXXX.3mf" project 3mf file and “BentoBox20 User Guide 2023XXXX.pdf” Descriptions, BOM and build instructions are in there. I try my level best to make it as comprehensive as possible. Use only…
…Please be sure to hit like & post a make, I'd love to see your prints! EDIT: Finally! STEP file has been added!! Sorry it took so long guys, enjoy!! Add some class to your Voron with this awesome canopy / top hat! If you have a smaller…
Mixup of the Voron Trident skirting and tops for the ender 3 v2. The logo's can be hard to press in a bit of heat goes a long way to helping. Make sure to print the 4 extension feet and use your stock rubbers. I just glued on the “dummy”…
This is an adjustable gantry mounted nozzle parking spot and brush for Vorons (2.4 & Trident) using bambu lab's silicone wiper. New Version! Now made more modular and using high temperature silicone RTV to further improve nozzle heat…
I upgraded my Voron V2.4 with a CAN-toolboard. To fully replace the x and y drag chains, it is necessary to relocate the X and Y endstops. For X, there is a mount at the back of the toolhead carriage. For Y, it's common to move the…
This modified version uses M3x12 bolts instead of M5s, as M3s have by far enough strength to hold the weight of the printer. Also, I did not have M5 blots and nuts laying around. BOM (per handle): 2x M3x12 bolts of any type 2x 2020…
Canopy for the Voron 2.4. Will need to be printed with supports, corner for fan will need to be mirrored for one side. Will work with 250, 300, & 350. Will use the standard acrylic top panel. Spots for 60mm fans with spacing for charcoal…
Stronger Snap Latch with M3 Screw Because any voron builder has tons of spare M3 screws! This repo is based in the amazing works from: Original Snap Latch:…
THERE IS NO STEP FILE BECAUSE IT WAS MADE IN TINKERCAD. EDIT: Added more sizes for different thickness of acrylic and foam gaskets. I have not tested these other sizes. I wanted a full front door without the extra visual weight of a frame…
Trident PTFE Guides Printing: Default voron settings, correct orientation, no supports needed! Bom: Only printed parts. Description: Made to guide the PTFE tube uniformly into the extruder, and avoid rubbing against the top panel. One 90°…
Simple replacement cable cover for the A drive of a Voron Trident to accept a PG7 cable gland for a CAN umbilical. Its a little wider and has screw-in threads for the common PG7 cable glands which are big enough to allow a genuine Molex…
This is still an untested WIP, but I am uploading in case people like the idea enough to modify to fit other printers. I intend for the handles to be useable. A ½" square profile steel pipe is to be tapped and inserted into the top…
UPDATE 05.05.2024: Die CAD Dateien wurden auf den aktuellen Stand gebracht. Die seitlichen Fan Cover, sowie der entsprechenden Fan Mount wurden minimal angepasst, da es hin und wieder Probleme mit den Lochabständen gab. Der Displaymount…
BE SURE TO SET CORRECT Z HEIGHT IF USING SEPERATE ENDSTOP. I RECOMMEND JUST USING THE TAP AS THE Z ENDSTOP TO PREVENT INCORRECT Z HEIGHT SETTINGS.…
A remix of a mounting arm I found in the Voron Discord. Unfortunately I don't know who created this. I made this one from scratch and also added the step. You need 2xM3x12, 2x extrusion nuts and 2 heat inserts. You can find some example…
King Tritons Trident I designed a replacement trident for my godchilds Disney King Triton (30,5cm) from Disneys Little Mermaid And by the way… look at this awesome guy printing my design for his halloween costume…
About This adds a 120mm auxiliary cooling fan to Voron Trident 3D printers. This is heavily inspired by the VzBots RSCS cooling fans. The cooling is mainly targeted at the center of the bed (around 150-200mm wide air stream). No…
…Please be sure to hit like & post a make, I'd love to see your prints! For use with model: https://www.printables.com/model/594894-voron-24-trident-canopy-top-hat-remix-split-model- These clips will keep your top panel sealed & secure in…
Voron 2.4 / trident 9mm belt gantry u'll need to think 8-10mm longer on every bolt. been using this on my 8 machines for a year now…time to share you need 12 695 bearings and if you dont use f695 as idlers in XY joints closest to print…
Not so much a remix as it was inspired by PushingPixels ' PG7 Cable Cover as the CAD is my own, but the credit definitely goes to PushingPixels for the concept. This is an adapter for a CAN umbilical to mount to the gantry using PG7cable…
Trident PTFE support Since it's little space above the gantry in a Trident the bowden tube gets tangled up at times (esp in a 350mm). This helps guide the tube out and around the chamber as the gantry moves around. Bom: 1x M3x8 Bolt and…
It requires 4, m2.5x10 button head or socket head cap screws. The screws pass through the Pi and Mount, and thread directly into the plastic of the DIN clips.
Uses a M3x25 instead of the default pin. You'll also need a M5x16 + nut and 2xM5x10 + 2x extrusion nuts Mounted in the rear right corner for the highest distance possible
The main goal for this mod is that I can clean the nozzle after I pause and resume the print, which is usually make small leakage of nozzle. You need 2 heat insert for the brush holder, to fixed the holder on the frame mount. Another 2…
Big thanks to FunFunBoy to his simple and easy Nozzle Scrubber Bucket . I want this bucket to fit my trident and i made this arm extension to mount it on the bed . Printed with ABS 0.2 /50% infil /4 walls / 5 Top -Bottom BOM 2 ( M3 heat…
I just modded the XY Joiner for the Gantry to fit MGN12H Rails instead of MGN9C. WHY? Cause i don't have 9C Linear Rails in stock :) Just the lower part has to be changed, upper joiners still stock. Print Settings Supports: No Resolution:…
Previously to everything else, if you would need an adpated Version, like different Panel Size etc., just DM me and i might adapt and add it. (TBD) Modded back pieces for Umbilical Passthrough (06.09.2024) Screwable Retainer Lid for the…
I printed it on the A1 mini using PLA+ with a 0.1 mm layer height . It is printed with AMS . It does not require support.
Mammoth-3D CPAP Muffler: Reducing Noise by 13 dB with 100% Airflow for 3D Printing Part Cooling The Mammoth-3D CPAP Muffler is specifically designed to reduce the noise generated by the cooling fan ( 24V Brushless Centrifugal Air Blower…
This is a project for a 124cm so almost life size Minecraft trident. There are holes where metal rods can be placed: three holes for 8cm long 5mm diameter rods in the head of the trident and a hole through the whole thing for a 1m long…
A simple trident model, 102mm long. As the model is chamfered on both sides, printing with a brim is recommended to prevent lifting or warping. (Just peel it off after =D ) Notes: Print with a Large Brim to prevent lifting. =D
Jan. 23, 2023 Update: Added sheet holder for Voron 0. The slots are 1.5 mm wide and 128 mm in length Added the 350 mm size holder without logo as STP for customization.…
Just remodeled the Voron Trident Z Carriages to fit MGN12H Rails, as i'm reusing some old parts for my build. Please NOTE THAT, Positions are all the same, nothing changes. As MGN12H Carriages are wider than your extrusion, you should use…
Prefab Voron Skirt's for custom made infill patern's on bootom layer as you can see in the preview. This is just .STEP files This work only for Prusa Slicer 2.5.0, in this version support a STEP files import Super Slicer don't support…
I broke my display that came with my LDO Voron Trident kit as a result of a series of bad decisions. Decided to run it headless for now and I didn't find a design I liked so I remixed the rear center skirt into something that would fit…
Description This is a complete skirt mod for Voron Trident. The stock skirts on Vorons feature very big hexagons which allow for fingers to pass through and are also aestehtically too “busy” for my taste. The aim here is on one side to…
This model is an attempt to design an A-Drive mount for PUG (Parametric Umbilical Gland) See PUG https://www.printables.com/fr/model/378567-pug-parametric-umbilical-gland-for-cw2 For Voron 2.4 A drive mount see…
Background After switching my Trident over to using a CAN toolhead and removing the X/Y cable chains, the one thing that I wasn't satisfied with was umbilical wire management. Unlike on the Voron 2.4, piano wire isn't very practical since…
A neat trident for Dummy 13. He (or she) can spear their enemies at close range or 360 no-scope them from a distance.
This model is compatible with the lego system.
THERE IS A NEW VARIANT AVAILABLE https://www.printables.com/model/1028469-voron-trident-110mm-y-alignment-guide-jig-v2 A 110mm alignment guide for the VORON Trident. Print 2 pieces. Material doesnt mater as long as its not TPU Step File…
I designed this simple mod to hold and protect the umbilical cable I run to my Voron Trident toolhead. This guides the wires down through the slot in the A-Drive so that they can be safely routed to the electronic bay at the bottom. The…
(16.02.2024) Outsourcing the 66mm Version to it's Original repository (01.02.2024) Added CAD Files and made the 66mm Version to be screwed down (35mm TBD) → There were to much reports of the TopHat not sitting tight enough against the…
its a trident from undertale for dummy13. You have to turn the piece upside down. for make it easier to print.
Trident r1 Skirts with mesh CHANGELOG 16.04.2023: I found a fault in the official CAD & .stl. Fixed in this update, refere to the issue I made. 16.04.2023: Initial release. Regarding the middle fans you can use this. !!Caution!! - The two…
This model is compatible with the lego system.
32mm scale miniature for tabletop gaming. Support on Patreon: https://www.patreon.com/printedencounter
A simple way to mount a BLTouch to voron 2.4/trident/ Ender 5 Mercury one X mgn12H version IMPORTANT: it is recommended to wrap the bltouch in some kapton tape and use a silicone sock to reduce heat transfer to the bltouch
There are several designs for nozzle scrubbers but this is compact and fits on the left side, opposite the Z end stop. My print bed thermal fuse is mounted on the right side of the bed, so I could not use the extension arm by 3DP-MAMSIH.…
Ramalamas have bearing wobble issues, Clees are bulky and not sleek, so….. Chunky ALPACA! A hybrid between all the amazing things Rama and Clee.
BTT Mini12864 Display Case for Voron 2.4 and Trident 2020 T slot rail. I didn't like the default folding design, as over time it tends to get loose. This holds the display firmly, at a 20 degree angle. To use this case on your Voron, you…
See that girl Watch that scene Diggin' the dancing queen This disco dance floor snap fits perfectly onto the B Drive pulley on a Voron Trident and allows you to mount a small rubber duck or some other mascot of your choice to add a little…
Ukrainian Trident. I saw this one ( https://www.thingiverse.com/thing:6014114 ) and printed it out, but it's not symmetrical, so I decided to make this model. Український Тризуб. Я побачив цей ( https://www.thingiverse.com/thing:6014114 )…
A trident belonging to Arthur
I was very surprised when I couldn’t find a CAD assembly of the Voron Trident 3D printer. For the convenience of customizing my printer, I prepared an assembly in STEP format based on the files from the GitHub repository:…
Sometimes it is a bit hard to place the black cover on the bottom of the printer. With these brackets, you have an easy way to slip the cover at the right position. Even with the CNC kit mounted. Here is an example how to use it: You just…
Must be printed with supports! You're trying to seal Voron Trident, you've already sealed everything with aluminum foil tape, and there's still heat and ABS smell leaking out somewhere. Try these plugs designed for the top 4 corners. For…
Update 20.12.2024 After recent mishap caused by improper flexplate placement with fully lowered bed 😅 few small modifications: added chamfer on front bottom edge, so even if plate is slightly misaligned, it should push the bucket back…
This is a re-modelling of the community user supplied SFS 2.0 bracket model posted on the BigTreeTech GitHub. https://github.com/bigtreetech/smart-filament-detection-module/tree/master/V2.0/Community Mods/Voron2.4 Unfortunately that model…
I liked the design so much that I made a 300 size version of it, and I haven't tested it yet
CAN Umbilical mount that acts as a cover for the exhaust. Swap with the original exhaust back cover. I've added 1.75mm ABS filament (twice the length of the umbilical cord, folded in half and fused the ends together with a lighter) for…
This is the second iteration of my Voron Trident Y Axis 110mm Alignment Guide/Jig Faster print Easy to assemble Less filament consumption
I am using Tap on my trident which pushes the hot end forward, thus making a rear nozzle scrubber very difficult to use. Clearances are extremely tight. I added a angle to the front of the brush holder to get the brush as close to the bed…
Canopy PTFE passthrough CHANGELOG 30.03.2024: Initial release. Description: I'm running both a Nevermore Stealthmax (which have sub-ideal PTFE routing) and "JSmith17's Canopy" on my Trident so I thought I'd make a better and more elegant…
…Please be sure to hit like & post a make, I'd love to see your prints! Here's my new Neopixel LED Top Hat Mod ! Add lights to the very top of your printer so you can easily see what its doing from a distance or in a busy room/farm! These…
Automatic filament purge tool for Voron/CoreXY printers The Goose Belt Purger is a compact, modular add-on for Voron-style printers that simplifies purging during tool changes. Ideal for multi-material setups or frequent filament swaps.…
*Work in progress. Still need to add pictures and documentation. Files used to add the Bondtech INDX system to a Voron Trident R2. Additional Hardware Required Front Idlers 1515 Extrusion (Horizontal frame extrusion width minus 35mm, ex.…
Hey together, this is my first sculpted miniature and I want to share it with you. I made this sculpt in a course. It is a gladiator, who skipped the leg day a little bit too often ;) So take care while removing supports. I printed the…
Organize your Revo nozzles in your VORON V2/Trident skirt! I have included the source Fusion360 and STEP files for you to customize to your needs (different size, comma decimal separator, etc). The included 3mf files are oriented face…
This piece is to support the wire channels when doing inverted electronics mod on a Voron Trident. I wanted to keep everything neat and allow an easily removable bottom panel if necessary. ABS or PETG recommended. Check sizing against…
A simple fan mount for 120x120x 25 mm or 140x140x 25 mm pc fans. Don't use fans with a depth greater than 25mm! Thinner is fine! You'll lose 10mm Z travel, but on the other hand you'll have much higher chamber temperatures. Due to the…
with the clicky clacky door the lcd screen is hidden under the door making it hard to see and use the screen. this will pull the screen out so its in plain view again. this is intended for the Waveshare 4.3 lcd screen (ldo kits include…
Heatset 2 Voron heatset inserts after printing and attach the same as the original brush attachment. The silicon scrubbers come with adhesive backing, so that is used to adhere the scrubber to the holder. Printed in ABS with standard…
Replacement cable cover with support for pg7 cable glands and passthrough for endstop switches
Trident AEG BASF Adapter for Reel to Reel Tape Print instructions PLA or PETG 80% infill Adjust the scale to fit it correctly if needed.
This is a remix of The Filter , which personally I like better than the Nevermore . The Filter was exclusively designed for the Voron 2.4 but I have a Voron Trident so I designed this mount that allows your to install The Filter under the…
After trying out the original nozzle park and brush mount I noticed it was a bit finicky to setup, so I went ahead and designed my own version: my project incorporates the adjustable dock from klicky00 which allows fine-grained z height…
VT Lowered Z Motor Mounts CHANGELOG 01.12.2022: Initial release, refere to description.. Description: Since i wanted a full 350mm cubed Trident i had to go with regular Nema17 steppers with loose leadscrews and couplers. That meant i had…
I loved the original design, but, it didn't support the camera angles needed to be useful on my Voron Trident printer. This was a very quick and crude STL edit and it worked out absolutely perfect. The cantilever does require supports but…
Mounts a pg7 cable gland to the trident frame that feeds directly into the extrusion t slot. Added the Archetype logo for added style points.
Stupid Amount Of Cooling This auxiliary fan mod lets me print PLA with a much higher speed on my voron trident. It was designed around gdstime 12032 fans. The fans are held in place using M3*6 BHCS which are screwed into heat set inserts…
Needed retainer for bowden but mounted on side of extrusion.
Lower the stepper height so as not to lose Z when using coupler. Scale Z to get the height to your liking. It's currently 22,5mm, which fits close to the Voron Trident's original stand. Recommend printing with ABS.
Since I am a poor grad student buying umbilical glands after a voron kit was just too much. Also, I had already connected my wires to the board, so I wasn't about to undo those million zipties to re-route them through a gland. Enter PUG-…
I really liked the original model but I didn't want to drill holes in my doors, so remixed them to use VHB tape. I've also used higher pin heights on the lower hinges to make putting the doors on easier. Hardware wise you just need: 4 x…
specifically made for a 350mm voron 2.4 but i dont see why it wouldnt work on any other printer. i just used 30 led per meter ws2812b neopixels i got off aliexpress and they work great assembly is straight forward but i do reccomend using…
Voron 2.4r2/Trident Sturdy handler remix with voron logo on front and back.
I have painted this part with plastic primer and decorative gold and put it on a small wooden stand with stainless steel metal screw. The head of the screw is hammered flat and filed to fit the slot in the bottom of the printed part. A…
Here is what you need to reproduce this. There are two sets of prints single-corner and single middle. When you print the tophat there are (4) corners that consist of 2 prints and (4) middle pieces. I have them named for each set. Here is…
I couldn't find a mount that fit the PI TFT43 4.3" screen so I remixed the design linked below to fit and designed a bezel. Print with normal Voron part settings, no supports needed.…
Has an opening to tug wires in afterwards. Based on the PG7 mount, which also fits.
Mount your Neptune Systems Trident & Trident NP to a vertical surface. Usually the vertical panel of an aquarium stand or a wall. There are 4 variants and 1 optional part. Only print out the piece(s) for the variant you want. Two piece…
Filter-housing with cable passthrough for CAN or umbilical and bowden + ECAS M10 cable passtrough 6mm for like IGUS
INTRODUCTION Due to popular demand we have designed the frame for a Voron Trident 250mm build. Because of the same frame dimensions this is also compatible with the Ender 5 Pro and Mercury One. NOTE: This model is considered a BETA…
Voron Trident skirt mod for the Schaffner FN284-4-06 combined power inlet. Using two M3 FHCS with nuts to mount it to the skirt. BOM: 2x M3x12mm FHCS 2x M3 nut ( other versions of the FN284 & FN283 should also work )
