Wyniki wyszukiwania: trm

Sortowanie

64 modeli

P
PrintablesSeeed Studio

L-Shape 3D Enclosure for TRMNL 7.5'' (OG) DIY Kit

This is the second 3D-printed enclsoure, featuring a wide base and a gently slanted backrest for the TRMNL 7.5" (OG) DIY Kit, which is co-developed by Seeed Studio and TRMNL, is a versatile e-ink development solution. It combines a…

Pobrania
1797
Polubienia
52
Ocena
3,33
P
PrintablesBurt0n

Remixed Upgrated Triangular Prism 3D Enclosure for TRMNL 7.5'' (OG) DIY Kit

Update 12/12/2025: I adjusted the bottom part (the pins are slightly narrower and there are four of them). I made the top part a millimeter deeper overall, so that the display should be better protected. Update 09/14/2025: I adjusted the…

Pobrania
1095
Polubienia
84
Ocena
4,86
P
PrintablesSeeed Studio

Triangular Prism 3D Enclosure for TRMNL 7.5'' (OG) DIY Kit

This is the first 3D-printed enclsoure featuring a triangular prism-like shape rear support for the TRMNL 7.5" (OG) DIY Kit, which is co-developed by Seeed Studio and TRMNL, is a versatile e-ink development solution. It combines a…

Pobrania
655
Polubienia
23
Ocena
2
P
PrintablesSeeed Studio

Upgrated Triangular Prism 3D Enclosure for TRMNL 7.5'' (OG) DIY Kit

This is the upgraded 3D-printed enclsoure featuring a triangular prism-like shape rear support with margin for the TRMNL 7.5" (OG) DIY Kit, which is co-developed by Seeed Studio and TRMNL, is a versatile e-ink development solution. It…

Pobrania
641
Polubienia
35
Ocena
1
P
PrintablesTolbri

TRMNL DIY Kit Wall Mount

This wall mount is designed specifically for the TRMNL 7.5” (OG) DIY Kit. It allows you to securely mount your TRMNL device to a wall for a cleaner and more permanent installation. The mount consists of two printed parts, which are…

Pobrania
510
Polubienia
39
Ocena
4,8
P
PrintablesTTman

TRMNL 7.5" (OG) DIY Kit Wall Mount Case

This is the my 3D-printed enclosure for the TRMNL 7.5" (OG) DIY Kit, which is co-developed by Seeed Studio and TRMNL. It requires no adhesive or screws as it is designed to be press-fit together. All buttons are usable with the case and…

Pobrania
448
Polubienia
32
Ocena
4
P
PrintablesFliesWithWind

TRMNL 7.5inch(OG) DIY Case with Magnets or Wallmount

TRMNL 7.5inch(OG) DIY Case that you can mount with 15x3mm magnets or hang it on the wall. Use 4 M3x6mm screws to put it together. Be careful with the screen and FPC cable during assembly! This is a tight fit design. Make sure the…

Pobrania
395
Polubienia
44
Ocena
5
P
PrintablesMartin

Hausken XTRM Silencer Tool

This is a key that can be used to open most HAUSKEN mufflers. Print instructions It´s a simple part, and should be easy to print. I printed it without support.

Pobrania
366
Polubienia
6
Ocena
5

TRMNL OG 7.5″ DIY Kit Base – No Supports

TRMNL OG Kit Base (Seeed Studio) This is a custom base designed for the TRMNL OG 7.5" DIY Kit from Seeed Studio . The base is made of two simple, easy-to-print parts and requires no supports . The design focuses on clean assembly and…

Pobrania
157
Polubienia
10
Ocena
5
P
PrintablesNico

TRMNL / XIAO 7.5" ePaper picture frame for DIY Kit

I designed this picture frame style holder for the TRMNL diy kit. It includes a stand to place it on a desk or you can hang it on the wall. It uses short M3 threaded inserts to mount everything together. What i used:…

Pobrania
149
Polubienia
23
Ocena
5
P
Printablesjonschwenn

TRMNL BRKT

Easily attached to the wall with 3M Command Strips. Try painting on organic supports for the “hook”. It is designed with enough tolerance to make it easy to take off and on but provides more support than just a single hook.

Pobrania
129
Polubienia
9
Ocena
5
P
Printablescurby

TRMNL Button Mount

Design Goals Flexible Use the TRMNL button while mounted! Supports both magnets and command strips Free parameterized Fusion360 model Sturdy and Stable Solid contact with both TRMNL and mounting surface Locks into TRMNL hanging hole…

Pobrania
104
Polubienia
14
Ocena
5
P
Printablesalpha11213

Trmnl stand waveshare epaper display + waveshare epaper driver board

TRMNL Desktop Stand – Waveshare 7.5" E-Paper Display This TRMNL desktop stand is a sleek, low-profile enclosure designed to display a Waveshare 7.5" e-paper screen at a comfortable viewing angle. It securely houses the Waveshare e-paper…

Pobrania
104
Polubienia
8
Ocena
0
P
Printableslazyslacker

Seeed Studio TRMNL 7.5" (OG) DIY Kit IKEA RÖDALM Frame

All of the purely 3D printed options for frames for the Seeed Studio TRMNL kit were, in my opinion, ugly and/or hard to print. After trying a couple of those, being dissatisfied with them, and with aesthetics in mind, which is really half…

Pobrania
103
Polubienia
13
Ocena
5
P
Printablesmarapet

Triangular Prism 3D Enclosure for TRMNL 7.5'' (OG) DIY Kit remix

Remix of the enclosure for the 7.5 inch TRMNL epaper kit.

Pobrania
98
Polubienia
3
Ocena
4
P
Printablesjareware

TRMNL magnetic backplate

What you need The TRMNL device , obviously 4 times 10 x 2 mm neodymium magnets (e.g. these ) Optionally, ≤ 60 mm of thin steel wire Printing & assembly Print the plate . A .15 mm layer height is recommended, so that you get 2 layers below…

Pobrania
94
Polubienia
17
Ocena
5
P
Printableserikbuild

TRMNL Sturdy Fridge Magnet Mount

A rather sturdy and secure magnet fridge mount for the original TRMNL eInk Display. I was looking for something a little beefier than the original TRMNL fridge mount (found in their GitHub) which I found to be a little too flexy for my…

Pobrania
88
Polubienia
1
Ocena
5
P
PrintablesD

TRMNL Faceplate Cover

A cover to change the color of your TRMNL without having to remove it from the case. You can add custom text in your slicer. I used OrcaSlicer Text Tool, font Helvetica Neue, 70% height

Pobrania
87
Polubienia
9
Ocena
5
P
PrintablesDanioZg

TRMNL 7.5" (OG) DIY Kit - Slim & Sleek

This is a custom-designed enclosure for the TRMNL 7.5" (OG) ePaper Display DIY Kit by Seeed Studio . I created this model because I couldn’t find an existing case that met my expectations in terms of design, proportions, and simplicity.…

Pobrania
82
Polubienia
16
Ocena
5
P
Printablesoscarb

Stillness insert - 7.5" e-ink display case for TRMNL DIY Kit and IKEA RÖDALM (13x18cm)

Stillness insert A remix of the Waveshare 7.5 e-ink display insert for Ikea Rodalm Frame that can hold the TRMNL 7.5" (OG) DIY Kit , using a slightly modified base plate from the Triangular Prism 3D Enclosure . Made for my project…

Pobrania
77
Polubienia
7
Ocena
0
P
PrintablesCtrlAlt

TRMNL Stand for E-Ink Dashboard

Enhance your TRMNL experience with these custom-designed mounts/stands, perfect for showcasing the sleek and minimalist E-Ink dashboard. These stands are tailored to accommodate two configurations: one for the Raspberry Pi Zero W and…

Pobrania
76
Polubienia
13
Ocena
0
P
PrintablesKmech Mini

MKSTRM - Mech storm board game

Rules inside the archive, if you have suggestions feel free to comment I will change ;)

Pobrania
73
Polubienia
14
Ocena
0
P
PrintablesJohn

TRMNL Command Strip Nail

This is a faux nail head that supports 3m command strip for hanging a TRMNL device on the wall (see https://usetrmnl.com). The triangle nail head matches the triangular hole in the back of the TRMNL for easier alignment. The tolerances…

Pobrania
70
Polubienia
10
Ocena
0
P
PrintablesGeorgi Valkov

TRMNL Magnetic Mount

All other models I found made the TRMNL stick out too much or used magnets that I didn't have on hand. This one uses 6x2mm magnets (stacked twice) and has a thickness of a just a few layers. The model attaches to the TRMNL with double…

Pobrania
51
Polubienia
3
Ocena
5
P
PrintablesBas

TRMNL X low profile mount

Low profile wall mount for the TRMNL X, sticks out just 3.5 mm instead of the 20mm regular mount. Fits 4 10mm x 2mm magnets, to make sure the device can't accidentally fall off. Attach to the wall with screw or doublesided tape.

Pobrania
49
Polubienia
3
Ocena
5
P
PrintablesPEU

Nook Simple Touch no buttons case for TRMNL

Made this cases to replace the damaged NST case, and since its going to be used as a TRMNL screen with no user interaction removed all its buttons. There is a small hole in the back to reset the unit. It uses 2mm flat head screws, the…

Pobrania
41
Polubienia
11
Ocena
0
P
PrintablesFattum

E-Ink Display | ESPHome-TRMNL 7.5"

This is an E-Ink display running on ESPHome firmware, designed to display information from your Inker server and managed by Home Assistant . The project was not created by the ESPHome or TRMNL team and is not affiliated with them.…

Pobrania
38
Polubienia
23
Ocena
0
P
Printablesecoiras

XtrmBol: Exercise Gyro Toy

I have always been fascinated by these exercise gyroscopes and wanted to understand how they work, so I set to make one. After many prototypes it seems the important points are: add enough mass, distribute the mass as far from the…

Pobrania
34
Polubienia
15
Ocena
0
P
PrintablesMarcobrmn

Modified Backplate for TRMNL / XIAO 7.5" ePaper picture frame for DIY Kit

This modified backplate is designed to improve usability and everyday handling of the TRMNL / XIAO 7.5” ePaper picture frame DIY kit. The modification allows full access to the control buttons and the Inkpad charging port without the need…

Pobrania
34
Polubienia
7
Ocena
0
P
Printablesjjvcela

Klostrmanova rozhledna na Javorníku

Vymodelováno ve FreeCADu.

Pobrania
33
Polubienia
3
Ocena
0
P
PrintablesGoddog

Case for Waveshare 7.5 inches e-ink screen for BYOD TRMNL build

It kinda fits: waveshare 7.5" e-ink screen with Raspberry Pi HAT (Waveshare 13504) https://www.waveshare.com/7.5inch-e-pap Seeed Xiao ESP32-C3 - WiFi/Bluetooth - Seeedstudio 113991054…

Pobrania
29
Polubienia
0
Ocena
0
P
Printablesboklu

Slim wall-mounted frame/housing for the SEEED TRMNL 7.5" DIY kit or EN04 with 7.5" ePaper

The wall-mounted enclosure was originally designed for the TRMNL 7.5" (OG) DIY kit. However, as I’m working with OpenDisplay, the ESP32-S3 (XIAO EE04 board) is only partially suitable for battery operation. Fortunately, the XIAO EN04…

Pobrania
29
Polubienia
6
Ocena
0
P
PrintablesKimframes

TRMNL Stand

11.10.2025 update - added alternative V2 model with a less steep leaning angle.

Pobrania
28
Polubienia
4
Ocena
5
P
Printablesmaxelman

TRMNL OG Faceplate Cover

Pops on top for a new look and evens out the side widths

Pobrania
26
Polubienia
0
Ocena
5
P
Printablesjangrewe

TRMNL OG DIY Case

While there are plenty of TRMNL stands and cases, i wanted something that i can hook into the slots of an IKEA SKADIS panel, and also attach any other kind of mount i come up with. The USB-C port, power switch and all buttons are…

Pobrania
25
Polubienia
2
Ocena
0
P
Printablesmaxelman

TRMNL Wall Mount with Recessed 3M Command Strips

Updated 4/23/26 - Includes version that lets you keep the metal stand attached.

Pobrania
18
Polubienia
2
Ocena
0
P
PrintablesMichael Michon

Mac Classic case for TRMNL DIY

Mac Classic case for TRMNL DIY

Pobrania
17
Polubienia
6
Ocena
0
P
PrintablesRask

Desktop Dock and Glas-styled Wall Sconce for Seeed Studio TRMNL DIY kit with 24-pin B/W or 50-pin Colour Display

This is a minimalist desktop enclosure and Glas thermostat-inspired wall sconce to display your Seeed TRMNL DIY kit with the 24-pin 7.5" B/W TRMNL display or the 50-pin 7.3" E Ink Spectra 6 Colour display. Note: Choose the correct Core…

Pobrania
17
Polubienia
5
Ocena
0
P
PrintablesLollo

TRMNL OG DIY KIT 10" RACK MOUNT

A solution for mounting your TRMNL og DIY KIT on a 10" rack with an additional button. You need: a few M3 and M2 brass insert glue M12 push button double sided tape and zipties for the batter This model can be printed on smaller printers…

Pobrania
15
Polubienia
4
Ocena
0
P
Printableserikbuild

TRMNL Minimalist Mount for 19" Rack Blank Plate

Minimalist mount to secure TRMNL to a standard 19" rackmount blank plate. Uses 2x M5 Socket Hardware: 2x M5 x 10mm socket head screws; 2x M5 Nuts (standard M5x0.8mm thread). Designed to perfectly fit the hex grid spacing of THIS specific…

Pobrania
14
Polubienia
2
Ocena
0
P
PrintablesD'Van Howard

TRMNL Magnetic and Skadis Mount

Combination Magnetic & Skadis mount for the TRMNL. You could print half for only the magnetic mount, or all for the skadis option. No supports needed! Magnets press fit in so no need for glue either! Locking pin to hold plate onto the…

Pobrania
13
Polubienia
3
Ocena
0
P

TRMNL X low profile tape mount

Low profile mount using double sided tape for TRMNL X, sticks out 3.5 mm, needs four 10x2 neodymium magnets

Pobrania
13
Polubienia
1
Ocena
0
P
PrintablesKevDoy

TRMNL X Wall Plate Mount

Replace an blank wall plate to mount your TRMNL X on your wall without any additional modifications. Sleek and easy.

Pobrania
11
Polubienia
3
Ocena
5
P
Printableskibk

TRMNL 7.5″ Removable Wall Mount – Slide-Lock, Screw or Tape

A simple wall mount that lets you easily attach and remove your TRMNL. Fix the plate to the wall with screws or double-sided tape, place the TRMNL over it, and slide it down until it clicks securely into place. Both the removable back and…

Pobrania
10
Polubienia
1
Ocena
0
P
PrintablesKevdog114

Minimal refrigerator magnet holder for trmnl e-ink display

This is a very simple refrigerator magnet mount for the trmnl e-ink display. It uses 4 small round magnets (8mmx3mm) that are super-glued into the base, as well as an M2x6 bolt that is used to hold on to the trmnl device itself. The mount…

Pobrania
9
Polubienia
1
Ocena
0
P
Printablesw00h

Magnetic Wall Mount for TRMNL 7.5inch(OG) DIY Case

Idea After having printed @FliesWithWind's beautiful DIY TRMNL enclosure and with good success on my whiteboard, I wanted another mounting option. The requirements were: Easily removable device for charging or relocating Mountable via…

Pobrania
8
Polubienia
0
Ocena
0
P
Printablesdjdrey909

TRMNL 7.5"(OG) DIY Case. No screws and fits Prusa Mini+

I recently got a TRMNL DIY kit and was looking for a good case to mount on our fridge. This case from FliesWithWind was a good option, but it doesn't fit onto my Prusa Mini+ print bed. A little bit of time in Fusion and I'm now rocking…

Pobrania
8
Polubienia
2
Ocena
0
P
PrintablesGreaseMonkey

Teltonika mounting bracket TRB TRM RUT and other

Mounting bracket for different types of Teltonika devices. Print in PETG, PLA will also work. There are 3 types of mounts: Type A: RUT180, RUT181 RUT200 RUT240, RUT241 RUT260, RUT261 RUT270, RUT271 NTP001 TRM282 TRM500 Type B: TRB140,…

Pobrania
7
Polubienia
1
Ocena
0
P
Printableswmnl

Seeed Studio TRMNL 7.5" (OG) DIY Kit IKEA RÖDALM Frame (no extension cable)

A remix of Seeed Studio TRMNL 7.5" (OG) DIY Kit IKEA RÖDALM Frame where no extenion cable is required for cleaner look.

Pobrania
6
Polubienia
1
Ocena
0
P
PrintablesIhsan Topaloglu

Minimal DIY TRMNL Stand

This is a minimal DIY TRMNL stand compatible with an 7.5inch epaper display and Seeed Studio EE04 or EN04 driver boards with an 18650 battery.

Pobrania
5
Polubienia
1
Ocena
0
P
PrintablesMafatik

TRMLN shell for Seeed Studio XIAO

The shell has thin walls and a magnetically attached front plate that can be swapped out to suit your mood. The whole shell prints without supports — see the screenshot for part placement on the bed. Materials 4× M2×2.5×3 threaded inserts…

Pobrania
4
Polubienia
1
Ocena
0
P
Printablesb3ds555

TRMNL 7.5" (OG) DIY Kit – Slim & Sleek, 20° Tilted Display

A remix of DanioZg's Slim & Sleek case for the TRMNL 7.5" (OG) ePaper Display DIY Kit by Seeed Studio. The original holds the display at 90°. This version leans it back 20° over the mainboard case, which still sits flat on the desk.…

Pobrania
1
Polubienia
1
Ocena
0
P
Printablesunreal4u

TRMNL DIY 7.5'' screen holder

I wanted something that looked nice and could easily fit the hardware in and hang it in the kitchen with either tape or via some screws. Since I wasn't able to find anything online at the time I began developing my own. The result is what…

Pobrania
0
Polubienia
0
Ocena
0
P
PrintablesAMDbuilder

DIY TRMNL Mount

A simple command strip mount for the TRMNL DIY case, when using a nail may not be desired and/or an option. https://www.printables.com/model/1462748-trmnl-75-og-diy-kit-wall-mount-case

Pobrania
0
Polubienia
0
Ocena
0
P
Printablesnurali

magnetic trmnl case

a simple magnetic case for the trmnl diy kit with attachments.

Pobrania
0
Polubienia
0
Ocena
0
P
PrintablesWinnieThePooh

TRMNL OG Fridge Bracket

TRMNL OG Fridge Bracket - use double-sided mounting tape on the back.

Pobrania
0
Polubienia
1
Ocena
0
P
PrintablesJosias_stuff

ePaper Case for TRMNL 7.5" DIY Kit with Magnetic Wall Mount and Pole Clamp

A sturdy, fully screwed case for the Seeed Studio TRMNL 7.5" (OG) DIY Kit (800 × 480 ePaper, XIAO ePaper driver board with XIAO ESP32 S3 Plus, 2000 mAh battery), plus two holders that share the same magnetic interface: a wall mount and a…

Pobrania
0
Polubienia
1
Ocena
0
P
Printables

TRMNL DIY Kit Wall Mount

This wall mount is designed specifically for the TRMNL 7.5” (OG) DIY Kit. It allows you to securely mount your TRMNL device to a wall for a cleaner and more permanent installation. The mount consists of two printed parts, which are…

P
Printables

TRMNL / XIAO 7.5" ePaper picture frame for DIY Kit

I designed this picture frame style holder for the TRMNL diy kit. It includes a stand to place it on a desk or you can hang it on the wall. It uses short M3 threaded inserts to mount everything together. What i used:…

P
Printables

TRMNL Wall Mount with Recessed 3M Command Strips

Updated 4/23/26 - Includes version that lets you keep the metal stand attached.

P
Printables

TRMNL OG DIY KIT 10" RACK MOUNT

A solution for mounting your TRMNL og DIY KIT on a 10" rack with an additional button. You need: a few M3 and M2 brass insert glue M12 push button double sided tape and zipties for the batter This model can be printed on smaller printers…

P
Printables

TRMNL 7.5inch(OG) DIY Case with Magnets or Wallmount

TRMNL 7.5inch(OG) DIY Case that you can mount with 15x3mm magnets or hang it on the wall. Use 4 M3x6mm screws to put it together. Be careful with the screen and FPC cable during assembly! This is a tight fit design. Make sure the…

P
Printables

Desktop Dock and Glas-styled Wall Sconce for Seeed Studio TRMNL DIY kit with 24-pin B/W or 50-pin Colour Display

This is a minimalist desktop enclosure and Glas thermostat-inspired wall sconce to display your Seeed TRMNL DIY kit with the 24-pin 7.5" B/W TRMNL display or the 50-pin 7.3" E Ink Spectra 6 Colour display. Note: Choose the correct Core…

P
Printables

Nook Simple Touch no buttons case for TRMNL

Made this cases to replace the damaged NST case, and since its going to be used as a TRMNL screen with no user interaction removed all its buttons. There is a small hole in the back to reset the unit. It uses 2mm flat head screws, the…